Computer Engineering Commons^™

Development Of A Desktop Material Extrusion 3d Printer With Wire Embedding Capabilities, Jose Francisco Motta

Open Access Theses & Dissertations

Printed circuit boards (PCB) have been widely used as a permanent solution for generating complex circuitries to power electronic devices. Over the years, PCB boards have proved to be reliable when powering electronic devices. However, when fabricating a printed circuit board, one must outsource to fabricate the boards when in prototype phase. Therefore, the risk of intellectual property theft and long lead time is an issue. The objective of this Thesis is to develop a hybrid multi-tool desktop material extrusion 3D printer that allows for easy integration (modularity) of tools to generate multi-functional 3D printed components.

The addition of an …

Autonomous Uav Battery Swapping, Reed Jacobsen, Nikolai Ruhe, Nathan Dornback

Williams Honors College, Honors Research Projects

One of the main hindrances of unmanned aerial vehicle (UAV) technology are power constraints. One way to alleviate some power constraints would be for two UAVs to exchange batteries while both are in flight. Autonomous mid-air battery swapping will expand the scope of UAV technology by allowing for indefinite flight times and longer missions. A single board computer will control each UAV’s flight software to respond to inputs to align with each other mid-flight. When the two UAVs have joined, mechanical components will exchange a depleted battery on the worker UAV for a freshly charged battery that belongs to the …

Resource Optimization In Wireless Sensor Networks For An Improved Field Coverage And Cooperative Target Tracking, Husam Sweidan

Dissertations, Master's Theses and Master's Reports

There are various challenges that face a wireless sensor network (WSN) that mainly originate from the limited resources a sensor node usually has. A sensor node often relies on a battery as a power supply which, due to its limited capacity, tends to shorten the life-time of the node and the network as a whole. Other challenges arise from the limited capabilities of the sensors/actuators a node is equipped with, leading to complication like a poor coverage of the event, or limited mobility in the environment. This dissertation deals with the coverage problem as well as the limited power and …

Intelligent Uav Scouting For Field Condition Monitoring, Hasan Seyyedhasani

Theses and Dissertations--Electrical and Computer Engineering

Precision agriculture requires detailed and timely information about field condition. In less than the short flight time a UAV (Unmanned Aerial Vehicle) can provide, an entire field can be scanned at the highest allowed altitude. The resulting NDVI (Normalized Difference Vegetation Index) imagery can then be used to classify each point in the field using a FIS (Fuzzy Inference System). This identifies areas that are expected to be similar, but only closer inspection can quantify and diagnose crop properties. In the remaining flight time, the goal is to scout a set of representative points maximizing the quality of actionable information …

The Rhetoric Of Science Education And Technology, Iwasan D. Kejawa

School of Computing: Faculty Publications

Nearly thousands of science experiments are performed both on humans and animals every year in the United States (Gregory, 1999). Does Science enormously play a role in the well-beings of individual in the society? Research has found that science education is through motivation and satisfying the needs of humans. The scientific world is part of an elongated human development. This can be substantiated with the use and evolution of TECHNOLOGY and SCIENCE (Minton, 2004). Education of the entities that comprise the need to achieve the goal of TECHNOLOGY and SCIENCE which are important issues of today. Research has shown that …

Crop Height Estimation With Unmanned Aerial Vehicles, Carrick Detweiler, David Anthony, Sebastian Elbaum

School of Computing: Faculty Publications

An unmanned aerial vehicle (UAV) can be configured for crop height estimation. In some examples, the UAV includes an aerial propulsion system, a laser scanner configured to face downwards while the UAV is in flight, and a control system. The laser scanner is configured to scan through a two-dimensional scan angle and is characterized by a maxi mum range. The control system causes the UAV to fly over an agricultural field and maintain, using the aerial propulsion system and the laser scanner, a distance between the UAV and a top of crops in the agricultural field to within a programmed …

Internet Of Underground Things In Precision Agriculture: Architecture And Technology Aspects, Mehmet C. Vuran, Abdul Salam, Rigoberto Wong, Suat Irmak

School of Computing: Faculty Publications

The projected increases in World population and need for food have recently motivated adoption of information technology solutions in crop fields within precision agriculture approaches. Internet Of Underground Things (IOUT), which consists of sensors and communication devices, partly or completely buried underground for real-time soil sensing and monitoring, emerge from this need. This new paradigm facilitates seamless integration of underground sensors, machinery, and irrigation systems with the complex social network of growers, agronomists, crop consultants, and advisors. In this paper, state-of-the-art communication architectures are reviewed, and underlying sensing technology and communication mechanisms for IOUT are presented. Moreover, recent advances in …

Development Of A Locomotion And Balancing Strategy For Humanoid Robots, Emile Bahdi

Electronic Theses and Dissertations

The locomotion ability and high mobility are the most distinguished features of humanoid robots. Due to the non-linear dynamics of walking, developing and controlling the locomotion of humanoid robots is a challenging task. In this thesis, we study and develop a walking engine for the humanoid robot, NAO, which is the official robotic platform used in the RoboCup Spl. Aldebaran Robotics, the manufacturing company of NAO provides a walking module that has disadvantages, such as being a black box that does not provide control of the gait as well as the robot walk with a bent knee. The latter disadvantage, …

Insulting Words: "They Are Animals!", Carolyn A. Ristau

Animal Sentience

As Chapman & Huffman state, creating divisive human categories has rationalized atrocities committed against the “other.” Labeling neighboring warring villagers as “animals” is considered a despicable insult. Yet contemporary scientific views of many animals grant them thinking and conscious faculties, and the capacity for impressive achievements, many unattainable by humans. Robots, too, can accomplish many similar feats. But the essential reason we must protect animals is not because of their admirable abilities, but their capacity for consciousness, for suffering. Robots are not conscious. Participants in the human-animal debate should not complain about changing criteria for determining human uniqueness. New and …

How Children With Autism Spectrum Disorder Recognize Facial Expressions Displayed By A Rear-Projection Humanoid Robot, Farzaneh Askari, Huanghao Feng, Anibal Gutierrez, Timothy Sweeny, Mohammad H. Mahoor

Electrical and Computer Engineering: Graduate Student Scholarship

Background: Children with Autism Spectrum Disorder (ASD) experience reduced ability to perceive crucial nonverbal communication cues such as eye gaze, gestures, and facial expressions. Recent studies suggest that social robots can be used as effective tools to improve communication and social skills in children with ASD. One explanation has been put forward by several studies that children with ASD feel more contented and motivated in systemized and predictable environment, like interacting with robots.

Objectives: There have been few research studies evaluating how children with ASD perceive facial expression in humanoid robots but no research evaluating facial expression perception …

A Pilot Study On Facial Expression Recognition Ability Of Autistic Children Using Ryan, A Rear-Projected Humanoid Robot, Farzaneh Askari, Huanghao Feng, Timothy D. Sweeny, Mohammad H. Mahoor

Electrical and Computer Engineering: Graduate Student Scholarship

Rear-projected robots use computer graphics technology to create facial animations and project them on a mask to show the robot’s facial cues and expressions. These types of robots are becoming commercially available, though more research is required to understand how they can be effectively used as a socially assistive robotic agent. This paper presents the results of a pilot study on comparing the facial expression recognition abilities of children with Autism Spectrum Disorder (ASD) with typically developing (TD) children using a rear-projected humanoid robot called Ryan. Six children with ASD and six TD children participated in this research, where Ryan …

Gender Effects Of Robotics Programs On Stem-Related Self-Efficacy Of High School Students, Sandra Hall-Lay

Walden Dissertations and Doctoral Studies

Lack of STEM-related self-efficacy has impeded the growth of women in STEM fields. Out of school (OST) robotics programs and other STEM-related OST programs provide secondary students with opportunities to work in groups, brainstorm, and formulate ideas that require communication and teamwork. The purpose of this quantitative, quasi-experimental study was to compare STEM-related self-efficacy scores among male and female students who participated in OST robotics programs or other OST STEM-related programming. Independent variables were type of OST STEM program and gender. The dependent variable was students' STEM-related self-efficacy as measured by the Coping Self-Efficacy Scale. Responses from 149 students in …

Review Of Deep Learning Methods In Robotic Grasp Detection, Shehan Caldera, Alexander Rassau, Douglas Chai

Research outputs 2014 to 2021

For robots to attain more general-purpose utility, grasping is a necessary skill to master. Such general-purpose robots may use their perception abilities to visually identify grasps for a given object. A grasp describes how a robotic end-effector can be arranged to securely grab an object and successfully lift it without slippage. Traditionally, grasp detection requires expert human knowledge to analytically form the task-specific algorithm, but this is an arduous and time-consuming approach. During the last five years, deep learning methods have enabled significant advancements in robotic vision, natural language processing, and automated driving applications. The successful results of these methods …

Humanoid Robots Supporting Children’S Learning In An Early Childhood Setting, Helen Crompton, Kristen Gregory, Diane Burke

Teaching & Learning Faculty Publications

This qualitative study explored the affordances provided by the integration of the NAO humanoid robot in three preschool classrooms. Using the Head Start Early Learning Outcomes Framework as a lens, the researchers qualitatively analyzed data from focus groups, observations, field notes and student artifacts, using grounded coding to uncover language and communication, physical, cognitive and social–emotional learning experiences for children. The researchers also examined interactions between the robot, children and teachers to identify successes and challenges experienced during the integration. Findings indicate the robot provided opportunities for student development in all learning domains. Students were intellectually curious about the robot; …

Soft Foam Robot With Caterpillar-Inspired Gait Regimes For Terrestrial Locomotion, Cassandra M. Donatelli, Zachary T. Serlin, Piers Echols-Jones, Anthony E. Scibelli, Alexandra Cohen, Jeanne-Marie Musca, Shane Rozen-Levy, David Buckingham, Robert White, Barry A. Trimmer

Engineering Faculty Articles and Research

Caterpillars are the soft bodied larvae of lepidopteran insects. They have evolved to occupy an extremely diverse range of natural environments and to locomote in complex three-dimensional structures without articulated joint or hydrostatic control. These animals make excellent bio-inspiration for the field of soft robotics because of their diversity and adaptability. In this paper, we present SquMA Bot, a caterpillar-inspired soft robot. The robot's body is primarily composed of a soft viscoelastic foam, and it is actuated using a motor-tendon system. SquMA Bot is able to mimic the inching gait of a caterpillar and can use its flexible body to …

Real Time And High Fidelity Quadcopter Tracking System, Tyler Mckay Hall

Computer Engineering

This project was conceived as a desired to have an affordable, flexible and physically compact tracking system for high accuracy spatial and orientation tracking. Specifically, this implementation is focused on providing a low cost motion capture system for future research. It is a tool to enable the further creation of systems that would require the use of accurate placement of landing pads, payload acquires and delivery. This system will provide the quadcopter platform a coordinate system that can be used in addition to GPS.

Field research with quadcopter manufacturers, photographers, agriculture and research organizations were contact and interviewed for information …

An Unmanned Aerial System For Prescribed Fires, Evan M. Beachly

School of Computing: Dissertations, Theses, and Student Research

Prescribed fires can lessen wildfire severity and control invasive species, but some terrains may be difficult, dangerous, or costly to burn with existing tools. This thesis presents the design of an unmanned aerial system that can ignite prescribed fires from the air, with less cost and risk than with aerial ignition from a manned aircraft. The prototype was evaluated in-lab and successfully used to ignite interior areas of two prescribed fires. Additionally, we introduce an approach that integrates a lightweight fire simulation to autonomously plan safe flight trajectories and suggest effective fire lines. Both components are unique in that they …

Applied Deep Learning: Automated Segmentation Of White Matter Hyperintensities (Wmh) On Brain Mr Images, Matt Berseth

DHI Digital Projects Showcase

Small vessel disease plays a crucial role in stroke, dementia, and ageing. White matter hyperintensities (WMH) of vascular origin are one of the main consequences of small vessel disease and well visible on brain MR images. Quantification of WMH volume, location, and shape is of key importance in clinical research studies and likely to find its way into clinical practice; supporting diagnosis, prognosis, and monitoring of treatment for dementia and other neurodegenerative diseases. It has been noted that visual rating of WMH has important limitations and hence a more detailed segmentation of WMH is preferred. Various automated WMH segmentation techniques …

Development Trends In Robotics, Peter Kopacek

UBT International Conference

Robots are always a frequently used as an example for Mechatronic Systems. Currently the field of robotics is very fast growing. Therefore the overview is definitely not actual and have to be improved. The main goal of this contribution is to make some additional remarks to the existing kinds of robots and introduce some new with special emphasis to Mechatronic Systems like manufacturing automation by Production 4.0.

State Feedback Of Complex Systems Using Fuzzy Cognitive Maps, Vassiliki Mpelogianni, Ioannis Arvanitakis, Peter P. Groumpos

UBT International Conference

Complex systems have become a research area with increasing interest over the last years. The emergence of new technologies, the increase in computational power with reduced resources and cost, the integration of the physical world with computer based systems has created the possibility of significantly improving the quality of life of humans. While a significant degree of automation within these systems exists and has been provided in the past decade with examples of the smart homes and energy efficient buildings, a paradigm shift towards autonomy has been noted. The need for autonomy requires the extraction of a model; while a …

Emerging Role Of Robot-Assisted Occupational Therapy For Children With Down Syndrome, Venera Krasniqi, Nevena Ackovska, Katerina Zdravkova

UBT International Conference

Robotic technology is becoming increasingly popular as a platform for both education and entertainment. It also provides us with new conceptual directions which might have incredibly positive impact on children with physical growth delays and intellectual disabilities. In this research project, the educational robot Roamer Too from Valiant Technologies has been used to explore the development of social skills of children with Down syndrome. In conjunction with an interactive collaborative environment, this device represents a unique opportunity for these children to fully engage in learning, play, communication, build relationships and have fun. The results of this study indicate that educational …

Answering Food Insecurity: Serving The Community With Food And Knowledge Using Technology, Courtney Simpson

Purdue Journal of Service-Learning and International Engagement

The courses of Tech120, CGT110, and ENGT 180/181 and Red Gold at Purdue collaborated to design a robot that would plant and water a garden for a local community charter school. The students centered the project on the users’ needs for fresh food, nutrition education, and early exposure to STEM for children. The school, Anderson Preparatory Academy (APA), is comprised of many children who come from low-income families and are in the free or reduced lunch program. Inspired from “Farm Bot,” a similar system that allows for almost hands-free gardening, the “Boiler Bot” is designed to be scalable so children …

Implementation Of The Tickbot: Results And Implications For Modeling, Alexis White, Armin Bahrani, Amanda Devleeschower, Holly Gaff

Annual Symposium on Biomathematics and Ecology Education and Research

No abstract provided.

Formal Performance Guarantees For An Approach To Human In The Loop Robot Missions, Damian Lyons, Ron Arkin, Shu Jiang, Matt O'Brien, Feng Tang, Peng Tang

Faculty Publications

Abstract— A key challenge in the automatic verification of robot mission software, especially critical mission software, is to be able to effectively model the performance of a human operator and factor that into the formal performance guarantees for the mission. We present a novel approach to modelling the skill level of the operator and integrating it into automatic verification using a linear Gaussians model parameterized by experimental calibration. Our approach allows us to model different skill levels directly in terms of the behavior of the lumped, robot plus operator, system.

Using MissionLab and VIPARS (a behavior-based robot mission verification …

Rate Based Impact Analysis, Nishant Sharma

School of Computing: Dissertations, Theses, and Student Research

Impact Analysis (IA) identifies control and data dependencies to determine the system components that could be affected by a change. Changes to robotic systems as they are updated often alter the flow of control and sensor data. Changes to the rates at which data is published from sensors, controllers, and other parts of the system are particularly subtle and difficult to detect. These rate changes, even if minor (e.g. lowering the frame rate of a camera), can propagate throughout the system and have broad impacts. However, for robotic systems, these changes in flow rate cannot be precisely tracked by just …

Event And Time-Triggered Control Module Layers For Individual Robot Control Architectures Of Unmanned Agricultural Ground Vehicles, Tyler Troyer

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Automation in the agriculture sector has increased to an extent where the accompanying methods for unmanned field management are becoming more economically viable. This manifests in the industry’s recent presentation of conceptual cab-less machines that perform all field operations under the high-level task control of a single remote operator. A dramatic change in the overall workflow for field tasks that historically assumed the presence of a human in the immediate vicinity of the work is predicted. This shift in the entire approach to farm machinery work provides producers increased control and productivity over high-level tasks and less distraction from operating …

Developing Grounded Goals Through Instant Replay Learning, Lisa Meeden, Douglas S. Blank

Computer Science Faculty Research and Scholarship

This paper describes and tests a developmental architecture that enables a robot to explore its world, to find and remember interesting states, to associate these states with grounded goal representations, and to generate action sequences so that it can re-visit these states of interest. The model is composed of feed-forward neural networks that learn to make predictions at two levels through a dual mechanism of motor babbling for discovering the interesting goal states and instant replay learning for developing the grounded goal representations. We compare the performance of the model with grounded goal representations versus random goal representations, and find …

Ani-Bot: A Mixed-Reality Ready Modular Robotics System, Zhuangying Xu, Yuanzhi Cao

The Summer Undergraduate Research Fellowship (SURF) Symposium

DIY modular robotics has always had a strong appeal to makers and designers; being able to quickly design, build, and animate their own robots opens the possibility of bringing imaginations to life. However, current interfaces to control and program the DIY robot either lacks connection and consistency between the users and target (Graphical User Interface) or suffers from limited control capabilities due to the lack of versatility and functionality (Tangible User interface). We present Ani-Bot, a modular robotics system that allows users to construct Do-It-Yourself (DIY) robots and use mixed-reality approach to interact with them instantly. Ani-Bot enables novel user …

An Interactive Interface For Nursing Robots., Ankita Sahu

Electronic Theses and Dissertations

Physical Human-Robot Interaction (pHRI) is inevitable for a human user while working with assistive robots. There are various aspects of pHRI, such as choosing the interface, type of control schemes implemented and the modes of interaction. The research work presented in this thesis concentrates on a health-care assistive robot called Adaptive Robot Nursing Assistant (ARNA). An assistive robot in a health-care environment has to be able to perform routine tasks and be aware of the surrounding environment at the same time. In order to operate the robot, a teleoperation based interaction would be tedious for some patients as it would …

Cyber-Physical System Characterization And Co-Regulation Of A Quadrotor Uas, Seth E. Doebbeling

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

An Unmanned Aircraft System (UAS) is a Cyber-Physical System (CPS) in which a host of real-time computational tasks contending for shared resources must be cooperatively managed to obtain mission objectives. Traditionally, control of the UAS is designed assuming a fixed, high sampling rate in order to maintain reliable performance and margins of stability. But emerging methods challenge this design by dynamically allocating resources to computational tasks, thereby affecting control and mission performance. To apply these emerging strategies, a characterization and understanding of the effects of timing on control and trajectory following performance is required. Going beyond traditional control evaluation techniques, …