Computer Engineering Commons^™

Big Five Technologies In Aeronautical Engineering Education: Scoping Review, Ruth Martinez-Lopez

International Journal of Aviation, Aeronautics, and Aerospace

The constant demands that technology creates in aerospace engineering also influence education. The identification of the technologies with practical application in aerospace engineering is of current interest to decision makers in both universities and industry. A social network approach enhances this scoping review of the research literature to identify the main topics using the Big Five technologies in aerospace engineering education. The conceptual structure of the dataset (n=447) was analyzed from different approaches: at macro-level, a comparative of the digital technology identified by cluster analysis with the number of co-words established in 3 and 8 and, a keyword central structure …

Audio To Architecture: House Music As A Form Generator, Polina Timchenko

Architecture Undergraduate Honors Theses

Contemporary music undergoes similar process of creation to that of the design process through computation and variation. House music as a representation of contemporary culture has a layered structure that allows specific characteristics to identify it as house music. Song components can vary and mix in different orders that form new dynamic compositions. I am going to explore the idea that every house music component can be translated into geometry with the use of parametric design techniques.

Localization Using Convolutional Neural Networks, Shannon D. Fong

Computer Engineering

With the increased accessibility to powerful GPUs, ability to develop machine learning algorithms has increased significantly. Coupled with open source deep learning frameworks, average users are now able to experiment with convolutional neural networks (CNNs) to solve novel problems. This project sought to train a CNN capable of classifying between various locations within a building. A single continuous video was taken while standing at each desired location so that every class in the neural network was represented by a single video. Each location was given a number to be used for classification and the video was subsequently titled locX. These …

Autonomous Collision Avoidance In Small Scale Vehicles, Justin T. Sharpe

Honors Theses

The undergraduate research performed in this study focused on autonomous collision avoidance in small scale vehicles. The goal of this study was to find equipment to build a fully autonomous small scale vehicle for use in different applications. Radio frequency communication, ultrasonic sensors, and single board computers were used to create an autonomous vehicle for multiple applications. Different communication protocols and sensors were investigated, and an explanation was specified concerning the hardware choice. The main communication protocol tested was Long Range Wide Area Network, and the main electronics tested and used were ultrasonic sensors, First Person View cameras, and the …

A Scalable, Chunk-Based Slicer For Cooperative 3d Printing, Jace J. Mcpherson

Computer Science and Computer Engineering Undergraduate Honors Theses

Cooperative 3D printing is an emerging technology that aims to increase the 3D printing speed and to overcome the size limit of the printable object by having multiple mobile 3D printers (printhead-carrying mobile robots) work together on a single print job on a factory floor. It differs from traditional layer-by-layer 3D printing due to requiring multiple mobile printers to work simultaneously without interfering with each other. Therefore, a new approach for slicing a digital model and generating commands for the mobile printers is needed, which has not been discussed in literature before. We propose a chunk-by-chunk based slicer that divides …

Collaborative Robotic Path Planning For Industrial Spraying Operations On Complex Geometries, Steven Brown

Graduate Theses and Dissertations

Implementation of automated robotic solutions for complex tasks currently faces a few major hurdles. For instance, lack of effective sensing and task variability – especially in high-mix/low-volume processes – creates too much uncertainty to reliably hard-code a robotic work cell. Current collaborative frameworks generally focus on integrating the sensing required for a physically collaborative implementation. While this paradigm has proven effective for mitigating uncertainty by mixing human cognitive function and fine motor skills with robotic strength and repeatability, there are many instances where physical interaction is impractical but human reasoning and task knowledge is still needed. The proposed framework consists …

“New” Subjects In Mechatronics Management Education, Peter Kopacek

International Journal of Business and Technology

Process – and manufacturing automation as well as robotics are currently one of the fast growing fields in automation. Advanced process control, cyber-physical systems, industry 4.0 and “advanced robots” are no longer a headline. They are in realization. As a consequence of these developments new social, ethical and human questions appear.

Therefore this contribution is a first report about the continuous “modernization” of the Mechatronics Management BSc and MSc programs which are successful running at UBT. Both programs were developed in the framework of two TEMPUS projects from an international consortium from 2006 to 2009. Since that time new “buzzwords” …

Optimal Control Of Dc Motors Using Pso Algorithm For Tuning Pid Controller, Arnisa Myrtellari, Petrika Marango, Margarita Gjonaj

International Journal of Business and Technology

The DC motors are widely used in the mechanisms that require control of speed. Different speed can be obtained by changing the field voltage and the armature voltage. The classic PID controllers are widely used in industrial process for speed control. But they aren’t suitable for high performance cases, because of the low robustness of PID controller. So many researchers have been studying various new control techniques in order to improve the system performance and tuning PID controllers. This paper presents particle swarm optimization (PSO) method for determining the optimal PID controller parameters to find the optimal parameters of DC …

Cloud Oriented Additive Technology Use For Fast Prototype Development, Betim Shabani, Vladimir Dukovski

UBT International Conference

Digitalization has already affected every segment of the industry and especially manufacturing. Based on market requires that are more specific and faster than ever, there is a need to use some of the online platform packages called Cloud Manufacturing (CM). CM operate through the digital data then here comes the expression CAD models or in particular STL files that are currently adequate for Additive Technologies (AT). On the other hand, there is a rapid increase in the measurement aspects via non-contact forms (3D scanners) where their data are stored in various digital formats: IGES, OBJ, PLY, etc.). Those formats can …

The Importance Of Cad/Cae Systems In Development Of Product Design And Process Of Optimization, Fatmir Azemi, Xhemajl Mehmeti, Bekim Maloku

UBT International Conference

Computer Aided Design (CAD) and Computer Aided Engineering (CAE) are the most important technology tools that today designers are using in development of product (design and in process of optimization). Thus, this study is carried out to present the importance of CAD/CAE system on process of design and process of optimization of spur gear. The paper presents the usage of CAD system for modeling parts and CAE software for analysis of stress-strain of spur gear and the results of calculation of pair spur-gears that it used in the gearbox transmission of the bucket wheel excavator located in “Bardhi i Madh …

Designing A Controller Via Simulated Annealing, Zemerart Asani, Selvet Rexhepi

UBT International Conference

With Proportional-Integral-Derivative (PID) controllers being widely used in industry for optimum solutions. Optimization of the PID controller is an important problem in Control Engineering. Therefore, in this paper work we have implemented Simulated Annealing to tune the controller parameters. Optimizing the controller parameters on the basis of the Simulated Annealing algorithm, based on criteria defined using an objective function, allows us to find optimal solutions for the controller parameters that give us minimum error. In terms of performance, the PID controller designed with Simulated Annealing gives us great results with regard to the rise time, settling time, overshoot and steady-state …

Reinforcement Learning In Robotic Task Domains With Deictic Descriptor Representation, Harry Paul Moore

LSU Doctoral Dissertations

In the field of reinforcement learning, robot task learning in a specific environment with a Markov decision process backdrop has seen much success. But, extending these results to learning a task for an environment domain has not been as fruitful, even for advanced methodologies such as relational reinforcement learning. In our research into robot learning in environment domains, we utilize a form of deictic representation for the robot’s description of the task environment. However, the non-Markovian nature of the deictic representation leads to perceptual aliasing and conflicting actions, invalidating standard reinforcement learning algorithms. To circumvent this difficulty, several past research …

A Novel Indoor Positioning System For Firefighters In Unprepared Scenarios, Vamsi Karthik Vadlamani

Electrical and Computer Engineering ETDs

Situational awareness and indoor positioning of firefighters are types of information of paramount importance to the success of search and rescue operations. GPS units are undependable for use in Indoor Positioning Systems due to their associated mar- gins of error in position and their reliance on satellite communication that can be interrupted inside large structures. There are few other techniques like dead reck- oning, Wifi and bluetooth based triangulation, Structure from Motion (SFM) based scene reconstruction for Indoor positioning system. However due to high temper- atures, the rapidly changing environment of fires, and low parallax in the thermal images, the …

Project Janus, Theodore J. Lilyeblade, Jacqueline Worley, Garrison Bybee

Undergraduate Research Symposium - Prescott

The development goal of Project Janus is to design, fabricate, and program two robotic heads that can serve as animatronic chatbots. Each robotic head will be equipped with two USB webcams, a mono speaker within the robot’s mouth, and a pair of microphones. Additionally, each robotic head will feature a three degree of freedom neck, a one degree-of-freedom jaw, and a two degree-of-freedom gimbal for the eyes upon which the cameras will be mounted. The robotic heads will be interfaced to separate internet connected personal computers. Through these computers, they will make use of online speech recognition tools, online chatbots, …

A Dexterous, Glove-Based Teleoperable Low-Power Soft Robotic Arm For Delicate Deep-Sea Biological Exploration, Brennan T. Phillips, Kaitlyn P. Becker, Shunichi Kurumaya, Kevin C. Galloway, Griffin Whittredge, Daniel M. Vogt, Clark B. Teeple, Michelle H. Rosen, Vincent A. Pieribone, David F. Gruber, Robert J. Wood

Publications and Research

Modern marine biologists seeking to study or interact with deep-sea organisms are confronted with few options beyond industrial robotic arms, claws, and suction samplers. This limits biological interactions to a subset of “rugged” and mostly immotile fauna. As the deep sea is one of the most biologically diverse and least studied ecosystems on the planet, there is much room for innovation in facilitating delicate interactions with a multitude of organisms. The biodiversity and physiology of shallow marine systems, such as coral reefs, are common study targets due to the easier nature of access; SCUBA diving allows for in situ delicate …

Exploring The Effect Of Different Numbers Of Convolutional Filters And Training Loops On The Performance Of Alphazero, Jared Prince

Masters Theses & Specialist Projects

In this work, the algorithm used by AlphaZero is adapted for dots and boxes, a two-player game. This algorithm is explored using different numbers of convolutional filters and training loops, in order to better understand the effect these parameters have on the learning of the player. Different board sizes are also tested to compare these parameters in relation to game complexity. AlphaZero originated as a Go player using an algorithm which combines Monte Carlo tree search and convolutional neural networks. This novel approach, integrating a reinforcement learning method previously applied to Go (MCTS) with a supervised learning method (neural networks) …

Deep Rc: Enabling Remote Control Through Deep Learning, Jaron Ellingson, Gary Ellingson, Tim Mclain

Student Works

Human remote-control (RC) pilots have the ability to perceive the position and orientation of an aircraft using only third-person-perspective visual sensing. While novice pilots often struggle when learning to control RC aircraft, they can sense the orientation of the aircraft with relative ease. In this paper, we hypothesize and demonstrate that deep learning methods can be used to mimic the human ability to perceive the orientation of an aircraft from monocular imagery.

This work uses a neural network to directly sense the aircraft attitude. The network is combined with more conventional image processing methods for visual tracking of the aircraft. …

Enhancing 3d Visual Odometry With Single-Camera Stereo Omnidirectional Systems, Carlos A. Jaramillo

Dissertations, Theses, and Capstone Projects

We explore low-cost solutions for efficiently improving the 3D pose estimation problem of a single camera moving in an unfamiliar environment. The visual odometry (VO) task -- as it is called when using computer vision to estimate egomotion -- is of particular interest to mobile robots as well as humans with visual impairments. The payload capacity of small robots like micro-aerial vehicles (drones) requires the use of portable perception equipment, which is constrained by size, weight, energy consumption, and processing power. Using a single camera as the passive sensor for the VO task satisfies these requirements, and it motivates the …

A Hands-On Robotics Concentration Curricula In Engineering Technology Programs, Andy S. Zhang, Angran Xiao, Yu Wang, Farrukh Zia, Muhammad Ummy

Publications and Research

This paper discusses the creation of a robotic concentration with four courses to meet the industry demands for qualified graduates in product design and services. Advances in computer technology and electronics have created a new field called mechatronics. Nowadays almost all high tech products are mechatronics in nature. Products such as automotive subsystems (such as anti-lock braking systems and automatic steering systems), medical devices, environmental monitoring systems, service and surgical robots are all mechatronic products. The robotic concentration focus on one of the most popular and visible area of mechatronics: robotics. The creation of the four courses: Embedded Systems Fundamentals, …

Micro-Manipulation Using Learned Model, Matthew A. Lyng, Benjamin V. Johnson, David J. Cappelleri

The Summer Undergraduate Research Fellowship (SURF) Symposium

Microscale devices can be found in applications ranging from sensors to structural components. The dominance of surface forces at the microscale hinders the assembly processes through nonlinear interactions that are difficult to model for automation, limiting designs of microsystems to primarily monolithic structures. Methods for modeling surface forces must be presented for viable manufacturing of devices consisting of multiple microparts. This paper proposes the implementation of supervised machine learning models to aid in automated micromanipulation tasks for advanced manufacturing applications. The developed models use sets of training data to implicitly model surface interactions and predict end-effector placement and paths that …

Prototype Of A Fish Inspired Swimming Silk Robot, Cassandra M. Donatelli, Sarah A. Bradner, Juanita Mathews, Erin Sanders, Casey R. Culligan, David Kaplan, Eric D. Tytell

Engineering Faculty Articles and Research

Elongate fishes have evolved hundreds of times throughout the tree of life. They occupy many aquatic environments, from streams and ponds to the deepest parts of the ocean. Due to their long body and numerous vertebrae, they are also highly flexible animals, which makes them useful as bioinspiration for designs in the field of soft robotics. We present a biodegradable soft robot prototype, inspired by elongate fishes. The robot's body is primarily composed of a silk hydrogel with embedded fibers to mimic the structure of natural fish skin. When actuated at the front, the flexible gel prototype mimics the undulatory …

A Neuromorphic Quadratic, Integrate, And Fire Silicon Neuron With Adaptive Gain, David Parent, Eric Basham

Faculty Publications

An integrated circuit implementation of a silicon neuron was designed, manufactured, and tested. The circuit was designed using the Quadratic, Integrate, and Fire (QIF) neuron model in 0.5 µm silicon technology. The neuron implementation was optimized for low current consumption, drawing only 1.56 mA per QIF circuit and utilized hysteretic reset, non-inverting integrator, and voltage-squarer circuits. The final area of each circuit in silicon was 268 µm height × 400 µm width. This design is the first IC of its kind for this neuron model and is successfully able to output true spiking that follows the behaviors of bistability, monotonic, …

Surgical And Medical Applications Of Drones: A Comprehensive Review, Brent Terwilliger, James C. Rosser Jr., Vudatha Vignesh, Brett C. Parker

Publications

Drones have the ability to gather real time data cost effectively, to deliver payloads and have initiated the rapid evolution of many industrial, commercial, and recreational applications. Unfortunately, there has been a slower expansion in the field of medicine. This article provides a comprehensive review of current and future drone applications in medicine, in hopes of empowering and inspiring more aggressive investigation.

Search Methods For Mobile Manipulator Performance Measurement, Samuel Nana Yaw Amoako-Frimpong

Master's Theses (2009 -)

Mobile manipulators are a potential solution to the increasing need for additional flexibility and mobility in industrial robotics applications. However, they tend to lack the accuracy and precision achieved by fixed manipulators, especially in scenarios where both the manipulator and the autonomous vehicle move simultaneously. This thesis analyzes the problem of dynamically evaluating the positioning error of mobile manipulators. In particular, it investigates the use of Bayesian methods to predict the position of the end-effector in the presence of uncertainty propagated from the mobile platform. Simulations and real-world experiments are carried out to test the proposed method against a deterministic …

Identification And Optimal Linear Tracking Control Of Odu Autonomous Surface Vehicle, Nadeem Khan

Mechanical & Aerospace Engineering Theses & Dissertations

Autonomous surface vehicles (ASVs) are being used for diverse applications of civilian and military importance such as: military reconnaissance, sea patrol, bathymetry, environmental monitoring, and oceanographic research. Currently, these unmanned tasks can accurately be accomplished by ASVs due to recent advancements in computing, sensing, and actuating systems. For this reason, researchers around the world have been taking interest in ASVs for the last decade. Due to the ever-changing surface of water and stochastic disturbances such as wind and tidal currents that greatly affect the path-following ability of ASVs, identification of an accurate model of inherently nonlinear and stochastic ASV system …

Smart Vertical Farm System (Svfs), Sarasit Sirawattanakul

The International Student Science Fair 2018

The unremitting trends of increasing population, urbanization, diminishing water supply, and continuing climate change have contributed to declining stocks of arable land per person. Land available for farming is shrinking, and the demand for food is growing. All of these lead to food insecurity. For the first version of Smart Vertical Farm System is designed to increase food productions by an automatic system. It built with shelves which support soil and hydroponic system, stacked vertically. The system first shovels the soil in the tray and sews the seeds. There is also additional watering system. The hydroponic parts are on the …

Smart Vertical Farm System (Svfs), Sarasit Sirawattanakul

The International Student Science Fair 2018

The unremitting trends of increasing population, urbanization, diminishing water supply, and continuing climate change have contributed to declining stocks of arable land per person. Land available for farming is shrinking, and the demand for food is growing. All of these lead to food insecurity. For the first version of Smart Vertical Farm System is designed to increase food productions by an automatic system. It built with shelves which support soil and hydroponic system, stacked vertically. The system first shovels the soil in the tray and sews the seeds. There is also additional watering system. The hydroponic parts are on the …

Biomimetic Design And Construction Of A Bipedal Walking Robot, Alexander Gabriel Steele

Dissertations and Theses

Human balance and locomotion control is highly complex and not well understood. To understand how the nervous system controls balance and locomotion works, we test how the body responds to controlled perturbations, the results are analyzed, and control models are developed. However, to recreate this system of control there is a need for a robot with human-like kinematics. Unfortunately, such a robotic testbed does not exist despite the numerous applications such a design would have in mobile robotics, healthcare, and prosthetics.

This thesis presents a robotic testbed model of human lower legs. By using MRI and CT scans, I designed …

Robust Pose Estimation Of A Robotic Navigation Aid For The Visually Impaired By Multimodal Data Fusion, He Zhang

Theses and Dissertations

For a visually impaired individual, it is a challenging task for him/her to plan and follow a path towards the destination. This task is referred to as wayfinding. In this paper, the functions of wayfinding are defined as localization (aka pose estimation) in an indoor environment and finding a way to get to the destination by using the location information. To address this issue, vision-based navigation systems that use a camera for pose estimation have been intensively studied. Several vision-based robotic navigation aids (RNAs) for the visually impaired have been developed. However, these RNAs are not reliable enough to assist …

Baseball Shagger, Anthony Velasquez, Nick Walker, Nathaniel Kai Paresa

Computer Engineering

The purpose of our project is to allow players to hit baseballs on a baseball field and not have to worry about picking them up. By combining our knowledge of software and hardware, we developed the first design of a robot that “shags” baseballs. Our endeavor was only partially successful. The device was tested on grass, turf, and concrete. The motors did not have enough torque to get moving on grass. The device faired better on turf where it could move, but was quite jerky as the motor drive needed to be high to start moving, but once it was …