Computer Engineering Commons^™

A Low Power Touch Screen Document Viewer, Chris Perfetto

Computer Engineering

This document will cover the requirements, design, implementation and testing of a low power touch screen document viewer to serve as a replacement bulletin board. It was Implemented using a BeagleBoard development board, a 4.3” touchscreen LCD and a SD card with a Ubuntu Linux OS installed. The testing of this device is primarily testing the power consumption. The device is not yet complete and will require further development for it to completely satisfy the requirements.

Pretty Lights, Nicholas (Nick) Delmas, Matthew (Matt) Maniaci

Computer Engineering

Digital media players often include a visualization component that allows a user to watch a visualization synchronized to their music or videos. This project uses the visualization plugin API of an existing media playback program (WinAmp) but it displays its visuals using physical LED lights. Instead of outputting visuals to the computer screen, data is sent over USB to a micro controller that runs the LED lights. This project aims to give users a more visceral visual experience than traditional visualizations on the computer screen.

Global Positioning Logger, Matthew Hall

Computer Engineering

The Global Positioning Logger (GPL) is a mobile embedded device that utilizes GPS technology. The GPS data is used to display current speed and past global locations.

Utopia 3.0: Power Cycling Controller Board, Allan Chan

Computer Engineering

The Universal Test & Observation Power Interface Adapter (UTOPIA) is a device used for hard drive testing by Western Digital. Utopia is designed to provide an interface to communicate with a hard drive and perform power cycling functions on a hard drive.

The purpose of this project is to develop a prototype that retains the features of the previous Utopia boards while including two new features to be used in the next design: voltage margining and improved Serial Input/Output (SIO) drive control.

This document describes the design of version 3.0 of UTOPIA starting with component selection, schematic design and, PCB …

Super Special Codes Using Super Matrices, Florentin Smarandache, W.B. Vasantha Kandasamy, K. Ilanthenral

Branch Mathematics and Statistics Faculty and Staff Publications

The new classes of super special codes are constructed in this book using the specially constructed super special vector spaces. These codes mainly use the super matrices. These codes can be realized as a special type of concatenated codes. This book has four chapters. In chapter one basic properties of codes and super matrices are given. A new type of super special vector space is constructed in chapter two of this book. Three new classes of super special codes namely, super special row code, super special column code and super special codes are introduced in chapter three. Applications of these …

Hardware Certification For Real-Time Safety-Critical Systems: State Of The Art, Andrew J. Kornecki, Janusz Zalewski

Department of Electrical Engineering and Computer Science - Daytona Beach

This paper discusses issues related to the RTCA document DO-254 Design Assurance Guidance for Airborne Electronic Hardware and its consequences for hardware certification. In particular, problems related to circuits’ compliance with DO-254 in avionics and other industries are considered. Extensive literature review of the subject is given, including current views on and experiences of chip manufacturers and EDA industry with qualification of hardware design tools, including formal approaches to hardware verification. Some results of the authors’ own study on tool qualification are presented.

Sensor Integration For Low-Cost Crash Avoidance, Stephane M. Roussel

Master's Theses

This report is a summary of the development of sensor integration for low-cost crash avoidance for over-land commercial trucks. The goal of the project was to build and test a system composed of low-cost commercially available sensors arranged on a truck trailer to monitor the environment around the truck. The system combines the data from each sensor to increase the reliability of the sensor using a probabilistic data fusion approach. A combination of ultrasonic and magnetoresistive sensors was used in this study. In addition, Radar and digital imaging were investigated as reference signals and possible candidates for additional sensor integration. …

Analyzing The Video Popularity Characteristics Of Large-Scale User Generated Content Systems, Meeyoung Cha, Haewoon Kwak, Pablo Rodriguez, Yong-Yeol Ahn, Sue Moon

Research Collection School Of Computing and Information Systems

User generated content (UGC), now with millions of video producers and consumers, is re-shaping the way people watch video and TV. In particular, UGC sites are creating new viewing patterns and social interactions, empowering users to be more creative, and generating new business opportunities. Compared to traditional video-on-demand (VoD) systems, UGC services allow users to request videos from a potentially unlimited selection in an asynchronous fashion. To better understand the impact of UGC services, we have analyzed the world's largest UGC VoD system, YouTube, and a popular similar system in Korea, Daum Videos. In this paper, we first empirically show …

Application Of Ict - I: A Framework For Finding Minimal Test Vectors For Stuck-At-Faults, Azam Beg, S.K. Hasnain

International Conference on Information and Communication Technologies

This paper presents a framework that utilizes Boolean difference theory to find test vectors for stuck-at-fault detection. The framework reads in structural-style Verilog models, and automatically injects single stuck-at-faults (either stuck-at-zero or stuck-at-one) into the models. The simulations are then performed to find minimal sets of test vectors. Using this setup, we conducted experiments on more than 4000 different circuits. The results show that an appreciable savings in test time and effort can be achieved using the method. The same setup can also be used for didactic purposes, specifically for digital design and test courses.

A Graphical Approach To Testing Real-Time Embedded Devices, Steven M. Day

Master's Theses

Software Testing is both a vital and expensive part of the software development lifecycle. Improving the testing process has the potential for large returns. Current testing methodologies used to test real-time embedded devices are examined and the weaknesses in them are exposed. This leads to the introduction of a new graphical testing methodology based on flowcharts. The new approach is both a visual test creation program and an automated execution engine that together frame a new way of testing. The new methodology incorporates flow-based diagrams, visual layouts, and simple execution rules to improve upon traditional testing approaches. The new methodology …

Where Does Your Institution Stand?, Wendell Brase, Mark Askren

Information Technology Services: Publications

Media coverage of sustainability and "green" issues is hard to ignore these days. But less clear is a specific understanding of what this agenda means within higher ed IT organizations. For starters, it's useful to self-assess whether your campus is a leading innovator on all things "green" or satisfied to remain inconspicuous in the middle of the pack. If your institution is trailing but wants to assert a leadership role in environmental stewardship, you need to get engaged to understand what it will take to catch up and how IT can be a leader, not just a contributor, to such …

Image Processing For Multiple-Target Tracking On A Graphics Processing Unit, Michael A. Tanner

Theses and Dissertations

Multiple-target tracking (MTT) systems have been implemented on many different platforms, however these solutions are often expensive and have long development times. Such MTT implementations require custom hardware, yet offer very little flexibility with ever changing data sets and target tracking requirements. This research explores how to supplement and enhance MTT performance with an existing graphics processing unit (GPU) on a general computing platform. Typical computers are already equipped with powerful GPUs to support various games and multimedia applications. However, such GPUs are not currently being used in desktop MTT applications. This research explores if and how a GPU can …

Performance Evaluation Of Network-On-Chip Interconnect Architectures, Xinan Zhou

UNLV Theses, Dissertations, Professional Papers, and Capstones

With a communication design style, Network-on-Chips (NoCs) have been proposed as a new Multi-Processor System-on-Chip paradigm. Simulation and functional validation are essential to assess the correctness and performance of the NoC design. In this thesis, a cycle-accurate NoC simulation system in Verilog HDL is developed to evaluate the performance of various NoC architectures. First, a library of NoC components is developed based on an existing design. Each NoC architecture to be evaluated is constructed from the library according to the topology description which specifies the network topology, network size, and routing algorithm. The network performance of four NoC architectures under …

Optimal Guidance Of A Relay Mav For Isr Support Beyond Line-Of-Sight, John H. Hansen

Theses and Dissertations

This thesis developed guidance laws to optimally position a relay Micro-UAV (MAV) to provide an operator with real-time Intelligence, Surveillance, and Reconnaissance (ISR) by relaying communication and video signals when there is no line-of-sight between the operator at the base and the rover MAV performing the ISR mission. The ISR system consists of two MAVs, the Relay and the Rover, and a Base. The Relay strives to position itself to minimize the radio frequency (RF) power required for maintaining communications between the Rover and the Base, while the Rover performs the ISR mission, which may maximize the required RF power. …

Hardware Algorithm Implementation For Mission Specific Processing, Jason W. Shirley

Theses and Dissertations

There is a need to expedite the process of designing military hardware to stay ahead of the adversary. The core of this project was to build reusable, synthesizeable libraries to make this a possibility. In order to build these libraries, Matlab® commands and functions, such as Conv2, Round, Floor, Pinv, etc., had to be converted into reusable VHDL modules. These modules make up reusable libraries for the Mission Specific Process (MSP) which will support AFRL/RY. The MSP allows the VLSI design process to be completed in a mere matter of days or months using an FPGA or ASIC design, as …

Dependable And Certifiable Real-World Systems – Issue Of Software Engineering Education, Andrew J. Kornecki

Department of Electrical Engineering and Computer Science - Daytona Beach

Embedded software and dedicated hardware are vital elements of the modern world, from personal electronics to transportation, from communication to aerospace, from military to gaming, from medical systems to banking. Combinations of even minor hardware or software defects in a complex system may lead to violation of safety with or even without evident system failure, a major problem that the computing profession faces is the lack of a universal approach to unite the dissimilar viewpoints presented by computer science, with its discrete and mathematical underpinnings, and by computer engineering, which focuses on building real systems and considering spatial and material …

A Modular Kernel Linear Discriminant Analysis Of Gabor Features For Improved Face Recognition, Neeharika Gudur

Electrical & Computer Engineering Theses & Dissertations

Automatic face recognition is one of the major challenges in computer vision and pattern analysis. This thesis presents an efficient face recognition system that is robust with regards to changes in illumination, facial expressions and partial occlusions. Modular Kernel Linear Discriminant Analysis performed on Gabor Features obtained from the face images is employed for improving face recognition accuracy. A face image is pre-processed using the 2D Gabor wavelet transform to achieve invariance to illumination in images. Modular approaches that divide the pre-processed images into smaller sub-images provide improved accuracy, as the facial variations in an image are confined to local …

Radar System Characterization Extended To Hardware In The Loop Simulation For The Lab-Volt™ Training System, Oscar C. Mayhew

Theses and Dissertations

Modeling RADAR signals in software allows the testing of potential electronic counter measures and electronic counter counter measures without the associated RADAR hardware and test facilities. Performing a characterization process on a real world RADAR system reveals all imperfections within the system. The Lab-Volt™ RADAR system served as the characterized real world RADAR system. The characterization process consisted of measurements at selected front panel locations on the Lab-Volt™ transmitter module, antenna pedestal, receiver module, and dual channel sampler module. Due to the overwhelming influence of antenna parameters on a received signal, the characterization process also attempted to derive an antenna …

Real-Time Gps-Alternative Navigation Using Commodity Hardware, Jordon L. Fletcher

Theses and Dissertations

Modern navigation systems can use the Global Positioning System (GPS) to accurately determine position with precision in some cases bordering on millimeters. Unfortunately, GPS technology is susceptible to jamming, interception, and unavailability indoors or underground. There are several navigation techniques that can be used to navigate during times of GPS unavailability, but there are very few that result in GPS-level precision. One method of achieving high precision navigation without GPS is to fuse data obtained from multiple sensors. This thesis explores the fusion of imaging and inertial sensors and implements them in a real-time system that mimics human navigation. In …

Aphid: Anomaly Processor In Hardware For Intrusion Detection, Samuel A. Hart

Theses and Dissertations

The Anomaly Processor in Hardware for Intrusion Detection (APHID) is a step forward in the field of co-processing intrusion detection mechanism. By using small, fast hardware primitives APHID relieves the production CPU from the burden of security processing. These primitives are tightly coupled to the CPU giving them access to critical state information such as the current instruction(s) in execution, the next instruction, registers, and processor state information. By monitoring these hardware elements, APHID is able to determine when an anomalous action occurs within one clock cycle. Upon detection, APHID can force the processor into a corrective state, or a …

Hardware Virtualization Applied To Rootkit Defense, Douglas P. Medley

Theses and Dissertations

This research effort examines the idea of applying virtualization hardware to enhance operating system security against rootkits. Rootkits are sets of tools used to hide code and/or functionality from the user and operating system. Rootkits can accomplish this feat through using access to one part of an operating system to change another part that resides at the same privilege level. Hardware assisted virtualization (HAV) provides an opportunity to defeat this tactic through the introduction of a new operating mode. Created to aid operating system virtualization, HAV provides hardware support for managing and saving multiple states of the processor. This hardware …

Hardware Realization Of A Transform Domain Communication System, Marshall E. Haker

Theses and Dissertations

The purpose of this research was to implement a Transform Domain Communication System (TDCS) in hardware and compare experimental bit error performance with results published in literature. The intent is to demonstrate the effectiveness or ineffectiveness of a TDCS in communicating binary data across a real channel. In this case, an acoustic channel that is laden with narrowband interference was considered. A TDCS user pair was constructed to validate the proposed design using Matlab™ to control a PC sound card. The proposed TDCS design used the Bartlett method of spectrum estimation, the spectral notching algorithm found in TDCS literature, quadrature …

Soldier/Hardware-In-The-Loop Simulation-Based Combat Vehicle Duty Cycle Measurement: Duty Cycle Experiment 2, Mark Brudnak, Mike Pozolo, Victor Paul, Syed Mohammad, Marc Compere, Et Al.

Publications

This paper describes a human-in-the-loop motion-based simulator interfaced to hybrid-electric power system hardware both of which were used to measure the duty cycle of a combat vehicle in a virtual simulation environment. The project discussed is a greatly expanded follow-on to the experiment published in [1]. This paper is written in the context of [1] and therefore highlights the enhancements. The most prominent of these enhancements is the integration (in real-time) of the Power & Electric System Integration Lab (P&E SIL) with a motion base simulator by means of a “long haul” connection over the Internet (a geographical distance of …

Robust Control Techniques Enabling Duty Cycle Experiments Utilizing A 6-Dof Crewstation Motion Base, A Full Scale Combat Hybrid Electric Power System, And Long Distance Internet Communications, Marc Compere, Jarrett Goodell, Miguel Simon, Wilford Smith, Mark Brudnak

Publications

The RemoteLink effort supports the U.S. Army's objective for developing and fielding next generation hybrid-electric combat vehicles. It is a distributed soldierin- the-Ioop and hardware-in-the-Ioop environment with a 6-DOF motion base for operator realism, a full-scale combat hybrid electric power system, and an operational context provided by OneSAF. The driver/gunner crewstations rest on one of two 6-DOF motion bases at the U.S. Army TARDEC Simulation Laboratory (TSL). The hybrid power system is located 2,450 miles away at the TARDEC Power and Energy System Integration Laboratory (P&E SIL). The primary technical challenge in the RemoteLink is to operate both laboratories together …

Robust Control Techniques For State Tracking In The Presence Of Variable Time Delays, Jarrett Goodell, Marc Compere, Miguel Simon, Wilford Smith, Ronnie Wright, Mark Brudnak

Publications

In this paper, a distributed driver-in-the-Ioop and hardware-in-the-Ioop simulator is described with a driver on a motion simulator at the U.S. Army TARDEC Ground Vehicle Simulation Laboratory (GVSL). Realistic power system response is achieved by linking the driver in the GVSL with a full-sized hybrid electric power system located 2,450 miles away at the TARDEC Power and Energy Systems Integration Laboratory (P&E SIL), which is developed and maintained by Science Applications International Corporation (SAIC). The goal is to close the loop between the GVSL and P&E SIL over the Internet to provide a realistic driving experience in addition to realistic …

Creating A Video Device Application, Kevin Septor

Honors Theses

A video device, such as a webcam, has the capability to be used in many ways, including recording video and behaving like a security camera. A TV tuner card can also record video, and in addition be used for watching television. However, the video hardware and device driver the operating system uses to access it are only capable of delivering raw frames of video. A user space application is necessary for exploiting the capabilities of such a device beyond reading sequential frames of video. This research explores the desiderata in a powerful video device application, and introduces a program that …

Parallel Implementation Of A Face Recognition [Sic] System Based On Modular Pca Approach, Rajkiran Gottumukkal

Electrical & Computer Engineering Theses & Dissertations

This thesis describes research in automated methods for the recognition of human faces. The research is driven by the need to design a method, which would ensure high accuracy under the conditions of facial expression, illumination and pose variations. The resulting method is able to cope with uncontrolled nature of facial expression, illumination and head rotations. The main novelty of this work is the idea that some of the local facial features do not vary even when the facial expression, illumination and pose vary. This idea is applied to the existing principle component analysis lPCA) method to arrive at a …

A Pipelined Architecture For Real Time Correction Of Barrel Distortion In Wide-Angle Camera Images, Hau Trung Ngo

Electrical & Computer Engineering Theses & Dissertations

Images captured by wide-angle cameras show barrel type spatial distortion due to wide-angle configuration of the camera lens where image regions farther from the center are compressed in a nonlinear fashion. The barrel distortion correction technique based on least squares estimation attempts to correct a distorted image by expanding it nonlinearly so that straight lines in the object space remain straight in the image space. The intensity value of a pixel in the expanded image is calculated by back mapping its position to the corresponding position in the distorted image and performing linear interpolation on the neighboring pixels. Distorted images …

Adl Modeling Of Jini-Upnp Bridging Using Rapide, Rehab Ahmed El Kharboutly

Archived Theses and Dissertations

No abstract provided.

Enterprise Integration With Erp And Eai, Jinyoul Lee, Keng Siau, Soongoo Hong

Research Collection School Of Computing and Information Systems

The Integration of enterprise with the ERP (enterprise resource planning) and EAI (enterprise application integration) is discussed. The ERP supports the centralized business strategy while EAI accomodates the decentralized business processes. The changes brought in by the internet technology led the internalization and extrenalization to move together. The agility and the flexibility in the organizations would be achieved by a greater degree of communication, coordination and cooperation in human factors and information technologies. The enterprise integration fulfills the needs of both internal business processes and external customer by internalization and externalization.