Transportation Engineering Commons^™

Increasing The Capacities Of Cable Cars For Use In Public Transport, Sergej Težak, Drago Sever, Marjan Lep

Journal of Public Transportation

This paper examines the advantages and disadvantages of cable cars in public transport within urban areas. The advantages of cable car transport compared to other modes of transport are its quiet operation with an environmentally-acceptable electric drive and the possibility of transporting passengers above the ground, which can provide additional transport dimensions within urban centers. However, cable cars have some disadvantages, especially their smaller capacities in relation to other modes of transport within the urban environment. Today's built cable cars have capacities up to 2,000 persons/h for aerial tramways (or jig-back ropeways) and up to 4,000 persons/h for gondolas.

Solutions …

Willingness To Use A Public Bicycle System: An Example In Nanjing City, Peiyu Feng, Wenquan Li

Journal of Public Transportation

The purpose of this paper is to examine the influence factors on willingness to use a public bicycle system and to analyze the impact of each. Ordered Logit and Probit models were used to analyze the change in user willingness after improvements were made. Data were collected from a random survey conducted in September and October 2014 in Nanjing, China. The findings of this research indicate seven factors that most influence willingness to use a public bicycle system, including socioeconomic factors and journey restrictions. Socioeconomic factors (gender, employment, and car ownership) have more impact on user willingness than journey restrictions. …

The Effects Of Access And Accessibility On Public Transport Users’ Attitudes, Subeh Chowdhury, Kasey Zhai, Asif Khan

Journal of Public Transportation

This study investigates existing users’ attitudes towards public transport from two perspectives. First, the effects of accessibility to various destinations and ease of access to terminals on public transport users’ attitudes are determined. Second, the contribution of social norm, as an information source, in the formation of users’ attitudes is assessed. A user-preference survey was undertaken in Auckland, New Zealand, at two terminals. Data were analyzed using ordinal and logistic regression models. Findings showed that residential density and quality of the built environment, particularly safety, have an effect on the number of pedestrians who access a terminal. Accessibility to various …

Exploring Transit Ridership Using Census, Routing & Scheduling, And Stop Characteristic Data, Douglas Harvey Moody

Master's Theses

This study develops, analyzes, and a­­­­­pplies transit-system-specific regression tree models that identify and prioritize transit system improvements through analysis and application of ridership, Census, routing and scheduling, and transit stop characteristic data. Regression trees identify and rank independent variables that split dependent variable datasets into meaningful subsets according to significant relationships with independent variable datasets, and regression tree models can be used to identify and prioritize transit system improvements. In this study, ridership datatypes are the dependent variables (i.e., boardings and alightings) and Census, routing and scheduling, and transit stop characteristic datatypes are the independent variables. Data associated with the …

Evaluation Of Lightweight Pieces In Aggregates, Mark Lindemann, Doug Macke, Jim Wilken, John Ebito, Mark Hassler, Lieska Halsey, Bob Seger

Nebraska Department of Transportation: Research Reports

Nebraska Department of Roads (NDOR) Material and Research (M&R) Division started an evaluation to determined injurious deleterious lightweight pieces of aggregate from a dry pit location, as a result of field observations from a project stock pile. This brief summary presents the field observation and laboratory testing evaluations to determine the percent of lightweight pieces in aggregate.

Evaluation Of Lightweight Pieces In Aggregates, Mark Lindemann, Doug Macke, Jim Wilken, John Ebito, Mark Hassler, Lieska Halsey, Bob Seger

Nebraska Department of Transportation: Research Reports

No abstract provided.

Active Traffic Management Case Study: Phase 1, Anuj Sharma, Shuo Wang, Aemal Khattak

Nebraska Department of Transportation: Research Reports

This study developed a systematic approach for using data from multiple sources to provide active traffic management solutions. The feasibility of two active traffic management solutions is analyzed in this report: ramp-metering and real-time crash risk estimation and prediction. Using a combined dataset containing traffic, weather, and crash data, this study assessed crash likelihood on urban freeways and evaluated the economic feasibility of providing a ramp metering solution. A case study of freeway segments in Omaha, Nebraska, was conducted. The impact of rain, snow, congestion, and other factors on crash risk was analyzed using a binary probit model, and one …

Automated Vehicles: A Guide For Planners And Policymakers, Charlie Coles

Master's Theses

Automated vehicles are those which are capable of sensing their environments in order to perform at least some aspects of the safety-critical control (like steering, throttling, or braking) without direct human input. As a guide for planners and policymakers, the objective of this thesis is to develop a strong foundation for anticipating the potential impacts resulting from advancements in vehicle automation. To establish the foundation, this thesis uses a robust qualitative methodology, coupling a review of literature on the potential advantages and disadvantages of vehicle automation and lessons from past innovations in transportation, with recent trends of the Millennial Generation, …

Webinar: Development Of A Pedestrian Demand Estimation Tool, Kelly Clifton

TREC Webinar Series

Why model pedestrians?

A new predictive tool for estimating pedestrian demand has potential applications for improving walkability. By forecasting the number, location and characteristics of walking trips, this tool allows for policy-sensitive mode shifts away from automobile travel.

There is growing support to improve the quality of the walking environment and make investments to promote pedestrian travel. Despite this interest and need, current forecasting tools, particularly regional travel demand models, often fall short. To address this gap, Oregon Metro and NITC researcher Kelly Clifton worked together to develop this pedestrian demand estimation tool which can allow planners to allocate infrastructure …

Calpoly 2015 Transportation Survey Report, William Riggs

City and Regional Planning Studios and Projects

In the spring of 2015, City & Regional Planning faculty conducted a campus-wide transportation survey as part of work on the campus Climate Action Plan. The survey represented spring 2014 commutes and was issued to a sample of full and part-time CalPoly faculty, staff, students and auxiliaries with assistance from Facilities Services and the Vice President for Administration and Finance.

The total number of responses was 3,961, roughly 17% of the entire campus population of roughly 23,000. Unsurprisingly, the majority of respondents were students, totaling 68.6%, while the rest were made up of faculty, staff, and visitors. Results are significant …

What Is Light Rail And How Can It Benefit Las Vegas?, Robert E. Lang

Brookings Scholar Lecture Series

Brookings Mountain West will lead an analysis of selected rail transportation systems in place and under construction throughout the United States, with an emphasis on the development of light rail systems in America's western cities. The implications for developing a light rail system in the Las Vegas Valley, including the impact on traffic congestion, environmental conditions, and the larger metropolitan economy will be explored. In addition, Keolis, a rail and transit operator in the United States and Canada, will be available to discuss the light rail option from a technological perspective. This summit is brought to you by Brookings Mountain …

State-Of-The-Art Review Of Cathodic Protection For Reinforced Concrete Structures, Aimee Byrne, Niall Holmes, Brian Norton

Articles

Cathodic protection (CP) limits the corrosion of a metal surface by making it the cathode of an electrochemical cell. This can be achieved either by using a more active sacrificial anode to create a driving current, or by using inert anodes and impressing a current onto the cathode surface using an external direct current (DC) source. Impressed current cathodic protection (ICCP) is preferred where widespread protection is required, particularly in reinforced concrete structures. ICCP needs a constant DC power supply that is usually provided through a grid connection or independent generators. This paper presents the currently available CP systems for …

Impact Of Dynamic Message Signs On Driver Behavior Under Reduced Visibility Conditions, Ryan Selby

Electronic Theses and Dissertations

Fog along roadways is a dangerous hazard that leads to crashes resulting from limited visibility. Low visibility gives drivers less time to react to potential obstacles that can suddenly appear and require immediate action. To solve this issue, early warning systems involving Dynamic Message Signs or other types of devices are used to alert drivers of the impending visibility condition so that they are prepared. This research focuses on testing the effectiveness of one form of warning systems to investigate how it impacts driver behavior in foggy conditions. To accomplish this objective, a simulation study is developed to test variables …

Commercial Driver’S License (Cdl) Workflow Study, Steven Andrew Martin, Candice Y. Wallace, Valerie J. Keathley, Jennifer R. Walton

Kentucky Transportation Center Research Report

Kentucky uses federally funded, time-limited (FFTL) employees to handle some of the administrative work necessary to meet federal compliance standards for commercial driver’s licenses (CDLs). The Federal Motor Carrier Safety Administration (FMCSA) has decided not to continue funding FFTLs for these purposes, meaning that states will have to find other ways to meet CDL program requirements and maintain compliance. Given the potential ramifications of losing federal transportation and enforcement funding due to lack of compliance with federal standards, it is imperative that state lawmakers act to ensure KYTC has the resources to carry out its mandated functions. The study delineates …

Java Based Visualization And Animation For Teaching The Dijkstra Shortest Path Algorithm In Transportation Networks, Ivan Makohon, Duc T. Nguyen, Masha Sosonkina, Yuzhong Shen, Manwo Ng

Civil & Environmental Engineering Faculty Publications

Shortest path (SP) algorithms, such as the popular Dijkstra algorithm has been considered as the "basic building blocks" for many advanced transportation network models. Dijkstra algorithm will find the shortest time (ST) and the corresponding SP to travel from a source node to a destination node. Applications of SP algorithms include real-time GPS and the Frank-Wolfe network equilibrium.

For transportation engineering students, the Dijkstra algorithm is not easily understood. This paper discusses the design and development of a software that will help the students to fully understand the key components involved in the Dijkstra SP algorithm. The software presents an …

Bakken Crude Oil And The Changing Logistics Of The American Oil Industry, Austin Rau

Independent Research

The extraction of Bakken crude oil in the Williston Basin of North Dakota is transforming how petroleum is shipped. Before 2008, North American oil was carried primarily via pipeline from source regions to refineries along the Gulf Coast or to metropolitan areas close to consumers. The current pipeline system is ill-equipped to accommodate massive volumes of oil from this previously low producing region. Lack of infrastructure and high demand for “light tight oil” (LTO) led to the use of railroads as a means of moving the product to refineries across the nation. Transporting oil via rail over long distances was …

Joint Modeling Of Traffic Related Crashes: A Copula Based Approch, Tammam Nashad

Electronic Theses and Dissertations

The study contributes to safety literature on transportation safety by employing copula based models for count frequency analysis at a macro-level. Most studies in the transportation safety area identify a single count variable (such as vehicular, pedestrian or bicycle crash counts) for a spatial unit and study the impact of exogenous variables. While the traditional count models perform adequately in the presence of a single count variable, it is necessary to modify these approaches to examine multiple dependent variables for each study unit. To that extent, the current research effort contributes to literature by developing two multivariate models based on …

Analysis Of Driving Behavior At Expressway Toll Plazas Using Driving Simulator, Moatz Saad

Electronic Theses and Dissertations

The objective of this study is to analyze the driving behavior at toll plazas by examining multiple scenarios using a driving simulator to study the effect of different options including different path decisions, various signs, arrow markings, traffic conditions, and extending auxiliary lanes before and after the toll plaza on the driving behavior. Also, this study focuses on investigating the effect of drivers' characteristics on the dangerous driving behavior (e.g. speed variation, sudden lane change, drivers' confusion). Safety and efficiency are the fundamental goals that transportation engineering is always seeking for the design of highways. Transportation agencies have a crucial …

3d Infrastructure Condition Assessment For Rail Highway Applications, Teng Wang

Theses and Dissertations--Civil Engineering

Highway roughness is a concern for both the motoring public and highway authorities. Roughness may even increase the risk of crashes. Rail-highway grade crossings are particularly problematic. Roughness may be due to deterioration or simply due to the way the crossing was built to accommodate grade change, local utilities, or rail elevation. With over 216,000 crossings in the US, maintenance is a vast undertaking. While methods are available to quantify highway roughness, no method exists to quantitatively assess the condition of rail crossings. Conventional inspection relies on a labor-intensive process of qualitative judgment. A quantifiable, objective and extensible procedure for …

Development Of A Statistical Theory-Based Capital Cost Estimating Methodology For Light Rail Transit Corridor Evaluation Under Varying Alignment Characteristics, Anthony J. Catalina

Theses and Dissertations--Civil Engineering

The context of this research is the investigation and application of an approach to develop an effective evaluation methodology for establishing the investment worthiness of a range of potential Light Rail Transit (LRT) major system improvements (alternatives). Central to addressing mobility needs in a corridor is the ability to estimate capital costs at the planning level through a reliable and replicable methodology. This research extends the present state of practice that relies primarily on either cost averages (by review of cost data of implemented LRT projects) or cost categories in high and low cost ranges. The current methodologies often cannot …

Estimation Of Annual Average Daily Traffic On Local Roads In Kentucky, William Nicholas Staats

Theses and Dissertations--Civil Engineering

Annual average daily traffic (AADT) is used to estimate intersection performance across Kentucky. The Kentucky Transportation Cabinet (KYTC) currently collects AADTs for state maintained roads, but lacks this information on local roads. A method is needed to estimate local road AADTs in a cost-effective and reasonable manner. A literature review was conducted on AADT models and found no models suitable to Kentucky. Therefore an AADT model using non-linear regression was developed for local roads in Kentucky

This model divided the state into three regions utilizing Kentucky’s highway districts. This partitioning accounted for geographic and socioeconomic variability across the state. Each …

Bridge End Settlement Evaluation And Prediction, Jiwen Zhang

Theses and Dissertations--Civil Engineering

A bridge approach is usually built to provide a smooth and safe transition for vehicles from the roadway pavement to the bridge structure. However, differential settlement between the roadway pavement resting on embankment fill and the bridge abutment built on more rigid foundation often creates a bump in the roadway. Previous work examined this issue at a microscopic level and presented new methods for eliminating or minimizing the effects at specific locations.

This research studies the problem at a macroscopic level by determining methods to predict settlement severity to assist designers in developing remediation plans during project development to minimize …

Estimating A Freight Mode Choice Model: A Case Study Of Commodity Flow Survey 2012, Nowreen Keya

Electronic Theses and Dissertations

This research effort develops a national freight mode choice model employing data from the 2012 Commodity Flow Survey (CFS). While several research efforts have developed mode choice model with multiple modes in the passenger travel context, the literature is sparse in the freight context. The primary reasons being unavailability and/or the high cost associated with the acquisition of mode choice and level of service (LOS) measures – such as travel time and travel cost. The first contribution of the research effort is to develop travel time and cost measures for various modes reported in the CFS. The study considers five …

Phase I Inspection Of The Stay Cable System On The Us 231 William H. Natcher Bridge Over The Ohio River, Theodore Hopwood Ii, Sudhir Palle, Danny Wells, Bobby W. Meade, Jared Fairchild, Christopher Goff

Kentucky Transportation Center Research Report

The US 231 Natcher Bridge was opened in 2002. By 2006 cracking was observed in the plastic piping that protected the stay cable strands from the environment at both the deck and tower anchorages. Over time the extent of cracking increased and an investigation was initiated to assess the types of deterioration impacting the cables, their causes and their impacts on the integrity of the stay cables.

From 2012-2015, a series of in-depth field inspections were performed using visual and nondestructive testing. Most of this work focused on the piping at the deck anchorages. The inspections disclosed voids in cable …

Precast Full-Depth Deck Panels Supported On Inverted Bulb-Tee Bridge Girders, Michael James Mingo

Electronic Theses and Dissertations

The South Dakota Department of Transportation (SDDOT) currently uses precast double-tee bridge deck systems for many of its county bridges because they are economical and fast in construction. Current bridges are designed for a service life of 75 years. However, many double-tee girder bridges are deteriorating and some need total replacement after 40 years in service. Furthermore, the double-tee bridge system only has one supplier in South Dakota. Alternative durable precast or prefabricated bridge systems are needed to provide more options to local governments when designing a new bridge. Different alternatives will also give local governments more flexibility to select …

Reuse Of Aqueous Waste Streams For Transportation-Related Applications, Gregory L. Hansen

Electronic Theses and Dissertations

Aqueous waste streams produced from commercial, industrial, and municipal processes may be potentially reused for transportation applications. The objectives of this project were to identify potential transportation-related applications for aqueous waste streams available in South Dakota, develop guidance for the beneficial reuse of aqueous waste streams, and evaluate the reuse of MIEX® brine generated by the Watertown Municipal Water Treatment Plant (WMWTP). This study identified many aqueous wastes from municipal water and wastewater treatment facilities, industrial and agricultural processes in South Dakota that can be potentially used for ice and dust control. Beneficial reuse of these waste streams requires a …

Experimental Rapid Renewal Project (Bridge Construction), Bobby W. Meade, Sudhir Palle, Theodore Hopwood Ii

Kentucky Transportation Center Research Report

The objectives of this study were to develop specifications and contract language and to monitor the implementation them to effectively use rapid reconstruction and extended service life concepts in new bridge construction. Through the use of A + B bidding, a duplex protective coating system using Hot Dipped Galvanizing (HDG) and paint, and preservation techniques such as concrete sealers and stains the Kentucky Transportation Cabinet attained those goals.

Integrating Cobots In Engineering Technology Education, Ana M. Djuric, Vukica Jovanovic, Tatiana V. Goris, Otilia Popescu

Engineering Technology Faculty Publications

Collaborative robots or CoBots, unlike traditional robots, are safe and flexible enough to work harmoniously with humans. Exploiting the efficiency of automated operations and the flexibility of manual operations in one process can improve productivity and worker job satisfaction. CoBots technology has been experiencing strong growth in different areas such as ground transportation, food-processing industry, car manufacturing, and naval or aeronautical engineering. Current CoBots education and training opportunities are rare or non-existent in university environments. In response to this need, we developed several CoBots modules which will be integrated in the current robotics and mechatronics courses. In this paper we …

Utilizing High Resolution Bus Gps Data To Visualize And Identify Congestion Hot-Spots In Urban, Nicholas B. Stoll, Travis B. Glick, Miguel Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

Congestion and travel delay on urban roadways can influence the roadways’ operating costs and service attractiveness. This research used high-resolution bus data to examine sources of delay on urban arterials. A set of tools was created to help visualize trends in bus behavior and movement; these tools allowed larger traffic trends to be visualized along urban corridors and streets. With buses as probes and examining aggregated bus behavior, contoured speed plots were used to understand the behavior of roadways outside the zone of influence of bus stops. Speed plots were used to discover trends and travel patterns with only a …

An Intermodal Network Model Of Coal Distribution In The United States And Its Economic Implications For The Inland Waterway System, Benjamin L. Blandford, Ted H. Grossardt, Michael Shouse, John Ripy

Kentucky Transportation Center Research Report

This paper describes a GIS-based intermodal network model for the shipment of coal in the United States. The purpose of this research was to investigate the role played by railways, waterways, and highways in the movement of coal from its source area to point of use, and to highlight the implications these movements have for the U.S. economy. The project team modeled coal movements across the U.S. intermodal transportation network using the Energy Information Administration’s 2010 data, which provided detailed origin, destination, primary mode, and volume information for coal shipments. The model identifies the optimum routes for coal shipments based …