Other Civil and Environmental Engineering Commons^™

Capturing Spatial Variability In Maize And Soybean Using Stationary Sensor Nodes, Jasreman Singh, Derek M. Heeren, Yufeng Ge, Geng Bai

Department of Agricultural and Biological Systems Engineering: Faculty Publications

• Irrigation in agriculture maximizes crop yield and improves food security globally • Irrigation scheduling is strongly based on the ability to accurately estimate the appropriate amount and timing of water application • The timing of the irrigation can best be informed through the crop canopy stress, and the amount of irrigation is informed through soil moisture depletion

• Developing upper (non-water stressed) and lower (non-transpiring) baselines for irrigated and non-irrigated maize and soybean • Investigating the relationship between the canopy stress and the soil moisture stress

The canopy temperature stress and soil moisture depletion had stronger correlation for non-irrigated …

Eliminating Rebar Splicing In Transverse Joints Of Precast Full Depth Bridge Deck Panels, David Gee

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

This study looks at the removal of longitudinal rebar splicing when sufficient longitudinal post-tensioning is provided for full-depth precast deck panels for simply supported bridges. Full-depth precast prestressed concrete deck panels are high quality plant produced pretensioned panels. They are often post-tensioned at the site to provide an average net compression in the joint of at least 250 psi due to effective prestress. This is to ensure adequate transfer of load as truck wheels pass over the joint. This net compression on the transverse joint is not explicitly clear by the AASHTO LRFD Bridge Design Specifications. Based on this section, …

The Geographic Disparities In Transportation-Related Physical Activity In The United States: An Analysis Of The 2017 Nhts Data, Hongwei Dong

Mineta Transportation Institute

Research on the relationship between urbanicity and physical activity yielded mixed results despite many studies consistently showing that residents tended to undertake more transportation-related physical activity in a more urban environment. This study analyzed the 2017 NHTS data to examine the geographic disparities in physical activity, particularly transportation-related physical activity in the United States. Our analysis suggests the relationship between urbanicity and physical activity demonstrates a flat U-shape in graphed data. Residents are more physically active when they live in the areas from the two ends of the urbanization spectrum: inner cities and inner suburbs of large metropolitan areas and …

Results Of Improvement Of The Technological Process Of Sorting Of Draged Seeds, R.K. Djamolov, E.T. Maksudov, K. Djamolov

Irrigation and Melioration

The article presents the results of experiments conducted to justify the parameters of the seed selection unit to improve the process of sorting seeds. The experiments were carried out by changing the angle of inclination of the seed tray to the horizontal plane from α = 390 to α = 540 and the radius of the lower part of the tray in the aisle R = 140-180 mm. The experimental results show that the bottom of the tray, made in the form of a semicircle, allows the seeds to move up the pipe when the seeds fall from the tray …

Porous Magnetic Nila-Ldos/Fe3o4 For Improved Phosphate Absorbtion And Antibacterial Activity In Secondary Effluent, Chi Thanh Vu

Research Horizons Day Posters

No abstract provided.

Evidence Of Arithmetical Uncertainty In Estimation Of Light And Water Use Efficiency, Meetpal S. Kukal, Suat Irmak Dr.

Department of Agricultural and Biological Systems Engineering: Faculty Publications

It was demonstrated that conventional resource use efficiency (RUE) estimation methodology is largely subject to arithmetic weakness. Extensive field research data on aboveground biomass (AGB), absorbed photosynthetically active radiation (APAR), and crop evapotranspiration (ETc) in maize, soybean, sorghum, and winter wheat confirmed this methodological bias for light use efficiency (LUE) and water use efficiency (WUE) estimation. LUE and WUE were derived using cumulated (data aggregates across samplings) and independent (data increments across samplings) approaches. Use of cumulated data yielded strong-but-false correlation between AGB and APAR or Etc, being a statistical artefact. RUE values from an independent (data increments across samplings) …

Predicting Escherichia Coli Loads In Cascading Dams With Machine Learning: An Integration Of Hydrometeorology, Animal Density And Grazing Pattern, Olufemi P. Abimbola, Aaron R. Mittelstet, Tiffany Messer, Elaine D. Berry, Shannon L. Bartelt-Hunt, Samuel Hansen

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Accurate prediction of Escherichia coli contamination in surface waters is challenging due to considerable uncertainty in the physical, chemical and biological variables that control E. coli occurrence and sources in surface waters. This study proposes a novel approach by integrating hydro-climatic variables as well as animal density and grazing pattern in the feature selection modeling phase to increase E. coli prediction accuracy for two cascading dams at the USMeat Animal Research Center (USMARC), Nebraska. Predictive models were developed using regression techniques and an artificial neural network (ANN). Two adaptive neuro-fuzzy inference system (ANFIS) structures including subtractive clustering and fuzzy c-means …

Uas Based Methodology For Measuring Glide Slope Angles Of Airport Precision Approach Path Indicators (Papi), Yi-Chun Lin, Seyyed Meghdad Hasheminasab, John L. Bullock, Deborah Horton, Adam Baxmayer, Ayman Habib, Darcy M. Bullock

Purdue Road School

This session presents alternative approaches for using unmanned aerial systems for checking the alignment of precision approach path indicators (PAPI lights). UAS data acquired at the KLAF (Purdue) airport will be used as an illustrative example.

A Novel Self-Healing System: Towards A Sustainable Porous Asphalt, Shi Xu, Xueyan Liu, Amir Tabakovic, Erik Schlangen

Articles

Self-healing asphalt, aimed to produce a sustainable asphalt pavement using green technology, has been studied in the past two decades. Technologies including encapsulated rejuvenator and induction heating have been proposed, demonstrated in the laboratory, and gradually evaluated in field application. This paper looks into the synergy effect of the above two technologies, where induction heating serves as the asphalt damage repair mechanism, requiring just 2 min heating time and encapsulated rejuvenator will replenish (rejuvenate) aged asphalt binder and reinstate bitumen’s healing ability. Moreover, the increased temperature from induction heating could in turn accelerate the diffusion process of rejuvenator into aged …

Energy Saving Issues In Pumping Units, A.I. Anarbaev, D.B. Kodirov, R.A. Zakhidov, B. Usmanov

Irrigation and Melioration

The article presents the issues of energy saving, which are becoming increasingly relevant due to the constant increase in tariffs and the introduction of the demands on energy efficiency and energy conversation. To save energy at pumping units, the characteristics of controlling the electric drive of pumping stations with frequency-controlled control are considered. For adequate adjustment by the technological process of water movement and power supply, corresponding analytical dependencies are obtained. An analysis of the physical expressions of water pumping processes allowed us to determine energy-saving modes of operation and technologies for improving the efficiency of equipment.

Importance Of Creating A System Of Land And Cadastral Data For Subjects Of Agriculture, К. Rakhmonov, M.O. Abdurakhimova

Irrigation and Melioration

A separate model and model were developed for compiling cadastral maps used by the authors for agricultural organizations. The model is intended for enterprises operating in the Tashkent region. The article is based on the scientific and methodological order and the system of destruction of irrigated lands. Based on the experience of leading foreign countries in this area, the possibilities of introducing modern electronic computers in Uzbekistan are presented. The procedure for converting data into a specific algorithm is recommended for the formation of a system of land cadastral data in agricultural entities. It is necessary to create an information …

Apple Orchard Drip Irrigation Conditions Of The Tashkent Region Of Uzbekistan, Sardor Gulyamov, Bakir Serikbaev, Anvar Sherov

Irrigation and Melioration

The article presents the results of many years of theoretical experimental field research on drip irrigation of the apple orchard of the Golden variety in the conditions of the Tashkent region. Based on the analysis of climatic, soil, hydrogeological, geological, hydrological and economic conditions of the experimental plot, as well as biological features of the garden, the values of total water consumption, water consumption deficit, irrigation, irrigation rate and the number of irrigation by the bioclimatic method are determined.

Calculation Of The Placement Of Vertical Drainage Wells Near An Open Water Source In The Conditions Of Waterlogging Of Built-Up Areas, B.K. Saliev

Irrigation and Melioration

The article discusses the methodology for calculating the intercepting drainage well that reveals the upper layer of the multilayer horizon, and presents analytical dependencies based on the hydrodynamic theory and formulas for approximate calculation of the location of the axial line of the blocking drainage between the source of flooding and the protected built-up area from flooding. In particular, mathematical methods have been improved to solve the forecast problems of flooding in conditions of different pressure, based on the relationship between the depressions and the incoming flow of pressure water into the drainage well. The presence of underground pressure water …

Multisector Water Consumption Database: Surkhandarya Region Of The Republic Of Uzbekistan, М. Ikramova, С. Batishev, О. Ikramov, H. Kabilov, D. Nazaraliev, А. Khodjiev, I. Akhmedkhodjaeva

Irrigation and Melioration

The available water resources in the country are used by the different sectors of economy as industry, agriculture, energy, communal service and etc. In this case the water distribution within the river basin requires perfect information service and data exchange facilities. In the paper the developed unified multi-sector on-line database is presented aimed to monitor the water distribution among sectors of economy, database structure, and data exchange tools. The software works at operative mood, allows evaluating the combined water use efficiency by water users.

Field Research Methods And Some Results For Distribution Of Suspended Sediment In Flow Constrained By Transverse Dams, M.R. Bakiev, K.T. Yakubov, O.M. Matkarimov, Z.B. Dovlatov

Irrigation and Melioration

The article presents methods for determining the main parameters of flow of medium hydraulic size sediment, turbidity, sampling methods in field and the instruments used for sampling, methods of processing the samples in laboratory. Methods for setting sections and gage points and conducting field and laboratory research have been developed for flow deformed by blank and through flow transverse dams, water surface longitudinal and transverse slope takes place in the flow constrained by transverse dams, changes in suspended sediment distribution occur inversely. Location of sections for sampling is determined in the article: in the headrace –beyond dam influence zone, maximal …

Hydromechanical Parameters Of River Sediment, A.M. Arifjanov, D.Sh. Allayorov

Irrigation and Melioration

The main problem today in irrigation canals is the danger of siltation, in this process it is important to correctly assess the factors affecting the throughput (hydromechanical parameters of sediment) and using their justification of the hydraulic elements of the flow. The article presents the results of theoretical studies of the main hydromechanical parameters (hydraulic fineness) of river sediments, in hydraulic structures, in particular in irrigation canals, which currently increasingly affect adversely moving water. It has been established that the hydraulic size entering the right bank irrigation sump of the Kokand hydropower complex varies in the range of 189-429 mm/s, …

Minimizing Control Circuits Using Logic Elements, R.T. Gaziyeva, A.M. Nigmatov, E.O. Ozodov

Irrigation and Melioration

In this article considered information about contact and non-contact automation. In most cases, contact automation is used in many pumping stations. These phenomena are a power surge or voltage drop. And also the use of contact automation occupies a large place and inconvenience in operation. Non- contactless automation solves these problems. Pumping stations are usually designed with the calculation of their operation without permanent duty personnel. At large stations, a small staff is provided, which primarily carries out control functions. Set the automatic operation of pumping units. Often, automatic selection of switched-on units is carried out, reserve is withdrawn, station …

Importance Of Creating A System Of Land And Cadastral Data For Subjects Of Agriculture, К. Rakhmonov

Irrigation and Melioration

The generation of electronic data using the land plot scheme while maintaining the land cadastre provides significant convenience for users. Based on this concept, the author explains the conditions, factors and elements of the formation of the contours of land within the land, which plays an important role in the land cadastral work. In particular, the elements of the contour of the earth, that is, the conditions and composition of the border, the area and the order of formation of numbers, are reflected in a separate figure. It is known that the composition of agricultural land plays an important role …

Method Of Determining The Parameters Of The Working Bodies Of The Centrifugal Fan Installed To The Sprayer, D. Dzhuraev, M.S. Halilov, I.Zh. Toirov, A.E. Urishev

Irrigation and Melioration

The article presents the data of scientists who conducted theoretical and experimental research on centrifugal fans, they refined the calculations, improved technical characteristics and aerodynamic designs of centrifugal fans. Aerodynamic and technological schemes of centrifugal fans installed to the sprayer have been developed. The theoretical and experimental studies conducted by scientists are described: Nevelson MI, Cherkassky VM, Kalinushkin MP, Ivanov O. P., Turbin B. G., on the basis of which the authors developed a method for calculating the main parameters of the working bodies centrifugal fan. Based on the developed calculation methodology, the main parameters of the working bodies of …

Experience Of Creation The Combined Power Complexes On The Basis Of Renewable Energy Sources, R.A. Zakhidov, A.I. Anarbaev, D.B. Kodirov, F.H. Mukhtarov

Irrigation and Melioration

At the article the combined energy complexes based on renewable energy sources implemented in various countries is analyzed. The regime issues of the most efficient use of maximum generation of electrical energy from solar, wind, biogas sources at reserved diesel station are given. Designs of generator modules based on a kinetic energy buffer storage device for preserving the quality of electricity from renewable energy sources with frequent changes in electrical loads of consumers are considered.

Analysis Of Results Of Researches Of Electrotechnological Treatment Of The Cotton Trouble Up To The First Crop Collection, A. Muhammadiev, A.I. Pardaev

Irrigation and Melioration

This article discusses the electrophysical characteristics of plants, more precisely the disclosure of the mechanism of electrical action on the plant through the study of the specific electrical resistance, as well as the task of developing the technological parameters of the electro-technological processing of crops. Knowledge of current value is given, passing through the minted and the rest of the cotton, determination of the negative impact of electrotechnological stamping of cotton on growth and development, yield, by electrotechnological method, including studies of the minted part of cotton, the death of the leaves, the seeds of the pests, the absence of …

Importance Of Creating A System Of Land And Cadastral Data For Subjects Of Agriculture, К. Rakhmonov

Irrigation and Melioration

The generation of electronic data using the land plot scheme while maintaining the land cadastre provides significant convenience for users. Based on this concept, the author explains the conditions, factors and elements of the formation of the contours of land within the land, which plays an important role in the land cadastral work. In particular, the elements of the contour of the earth, that is, the conditions and composition of the border, the area and the order of formation of numbers, are reflected in a separate figure. It is known that the composition of agricultural land plays an important role …

Banning Carbon Nanotubes Would Be Scientifically Unjustified And Damaging To Innovation, Daniel A. Heller, Prakrit V. Jena, Matteo Pasquali, Kostas Kostarelos, Lucia G. Delogu, Rachel E. Meidl, Slava V. Rotkin, David A. Scheinberg, Robert E. Schwartz, Mauricio Terrones, Yu Huang Wang, Alberto Bianco, Ardemis A. Boghossian, Sofie Cambré, Laurent Cognet, Simon R. Corrie, Philip Demokritou, Silvia Giordani, Tobias Hertel, Tetyana Ignatova, Mohammad F. Islam, Nicole M. Iverson, Anand Jagota, Dawid Janas, Junichiro Kono, Sebastian Kruss, Markita P. Landry, Yan Li, Richard Martel, Shigeo Maruyama, Anton V. Naumov, Maurizio Prato, Susan J. Quinn, Daniel Roxbury, Michael S. Strano, James M. Tour, R. Bruce Weisman, Wim Wenseleers, Masako Yudasaka

Department of Agricultural and Biological Systems Engineering: Faculty Publications

In a recent correspondence, the Swedish non-profit organization ChemSec announced the addition of carbon nanotubes to the SIN (‘Substitute It Now’) list1. Carbon nanotubes were added as an entire material class that “should be restricted or banned in the EU.” We believe that this recommendation confuses researchers and the public as it is based on evidence from a very narrow subset of data. Such a designation will likely hinder innovations that could lead to safe and effective applications of carbon nanotubes. Furthermore, this line of reasoning could damage other fields of science and technology, if applied similarly. We have worked …

Finding Patterns In Subsurface Using Bayesian Machine Learning Approach, Wang Hui

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Stochastic simulation approaches and uncertainty quantification are usually adopted for gaining insight into variability in soil stratigraphy configurations. Previous investigations at geotechnical site characterization and interpretation can be broadly categorized into geostatistics- and process-based methods. On the other hand, modern site exploration techniques provide high-quality, dense datasets in physical spaces with high resolution, either directly from sensors (for example, cone penetration testing data) or indirectly from geophysical inversion (such as seismic inversion, electromagnetic induction inversion, and ground penetrating radar). In this work, anisotropy and heterogeneity are considered as possible patterns that inherently exist in the observations, and these are inferred …

Why Are Residential Property Developers In Ireland Not Using Bim?, Bim Tudublin, Simon Burke

Capstone Reports

The aim of this paper is to establish the level of BIM adoption by larger-scale residential property developers in Ireland and investigate the benefits and challenges of implementing BIM for residential housing. While BIM is a relatively new concept in Ireland for housing, developers and investors in larger scale developments are beginning to recognize areas where BIM can add value to their projects. The research also indicates that while there is evidence of successful BIM implementation for housing resulting in savings in cost and time, widespread adoption is hindered by a lack of knowledge and skills, costs of implementation, lack …

Advancement Of Predictive Modeling Of Zeta Potentials (Ζ) In Metal Oxide Nanoparticles With Correlation Intensity Index (Cii), Andrey A. Toropov, Natalia Sizochenko, Alla P. Toropova, Danuta Leszczynska, Jerzy Leszczynski

Articles

It was expected that index of the ideality of correlation (IIC) and correlation intensity index (CII) could be used as possible tools to improve the predictive power of the quantitative model for zeta potential of nanoparticles. In this paper, we test how the statistical quality of quantitative structure-activity models for zeta potentials (ζ, a common measurement that reflects surface charge and stability of nanomaterial) could be improved with the use of these two indexes. Our hypothesis was tested using the benchmark data set that consists of 87 measurements of zeta potentials in water. We used quasi-SMILES molecular representation to take …

Steel Model Approval: Can Bim Provide A Drawing-Free Approval Process?, Bim Tudublin, David Reynolds

Capstone Reports

Despite widespread use of Building Information Modelling (BIM) software used within their industry, the approval of steelwork contractor’s design information is largely based on the approval of 2d-drawings. These workflows can be modernised to take advantage of current technology and provide productivity gains, but barriers to change exist. This research is an attempt to answer the research question of if a model-based approval process, which removes the need for drawings, is achievable. To answer this question, a mixed methodology was used. A literature review was performed to understand how the approval process works, what information is required and what BIM …

A Comparative Study Of Cadworx Plant 2018 And Revit 2020 With Ez-Iso Add-In, For The Production Of Piping Isometrics, Bim Tudublin, Killian Lynch

Capstone Reports

BIM software evaluation and selection is a complex process. In this paper, a comparative study of Revit 2020 with Ez-ISO add-in, and CADWorx Plant 2018, was carried out. The aim of this study was to determine if a MEP contractor could consolidate software usage into one package, thereby reducing costs for pipework modelling and isometric production. A comprehensive evaluation was developed based on a literature review. A multicriteria decision-making method was used in conjunction with the software evaluation to ensure sound choices were made. An online survey of senior BIM professionals was conducted to validate the analysis and findings. The …

A Critical Appraisal Of Findings And Solutions To Overcome Erroneous Bim Model Production And Information Delivery Workflows, Bim Tudublin, Ryan Forde

Capstone Reports

There are many varying definitions of Building Information Modelling, all of which reflect its transformative capabilities and impact on the construction sector. BIM is an emerging technological and procedural shift within the AEC industry (Succar, 2009). BIM is not just a technological change, but also a procedural and workflow change (Charles Eastman, 2018). Despite the growth of BIM adoption and increasing levels of maturity regarding BIM standards, numerous issues still arise at a micro level during project execution. BIM invokes the need for workflows, frameworks and processes that imparts knowledge, heightens trust, increases efficiency and consistency while reducing fragmentation and …

Thermophotovoltaic Systems For Achieving High-Solar-Fraction Hybrid Solar-Biomass Power Generation, Cm Iftekhar Hussain, Aidan Duffy, Brian Norton

Articles

Medium operating temperature hybrid solar-biomass TPV power plant design requires complex integration of multiple high temperature processes with low band-gap TPV cells. A 0.72 eV band-gap GaSb TPV cell has been used in thermophotovoltaic (TPV) systems operating at temperatures above 1400 °C. Low band-gap TPV cells, such as InGaAs (Eg = 0.55 eV) and InAs (Eg = 0.36 eV) could enable a TPV system to operate optimally at temperatures ≈1000 °C. To examine this, two hybrid solar-biomass TPV system configurations are studied using TRNSYS simulation that incorporates a new algorithm for TPV. It is found that in a high solar …