Open Access. Powered by Scholars. Published by Universities.®

Other Civil and Environmental Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2020

Construction Engineering and Management

Articles 1 - 14 of 14

Full-Text Articles in Other Civil and Environmental Engineering

Laboratory Testing And Mechanistic Analysis Of Treated Subgrade Soils, Hari Kumar Reddy Yarrapureddi Dec 2020

Laboratory Testing And Mechanistic Analysis Of Treated Subgrade Soils, Hari Kumar Reddy Yarrapureddi

Civil Engineering Theses

Calcium-based stabilizing agents such as cement and lime have been extensively used to improve the engineering properties of base and subgrade layers of pavement systems. Recently, polymers and chemical stabilizers have become popular due to cost efficiency, ease of application, and fast curing times. In this study, California Bearing Ratio (CBR) values of polymer and chemical treated soils were compared with the CBR values of soils treated with conventional stabilizers. Parametric sensitivity analyses was carried out on key parameters including the type of subgrade soil, stabilizing agent, stabilizing agent treatment levels, and moisture conditioning. Additionally, numerical analyses was performed to …

Go to article

Expanding The Concept Of Comprehensive Area Ratio Parameter To The South-Central States Towards Simplifying The Structural Evaluation Of Flexible Pavements At The Network Level, Nitish R. Bastola Dec 2020

Expanding The Concept Of Comprehensive Area Ratio Parameter To The South-Central States Towards Simplifying The Structural Evaluation Of Flexible Pavements At The Network Level, Nitish R. Bastola

Civil Engineering Theses

The surface deflection bowl data collected through Non-Destructive Testing (NDT) has been widely utilized by various Department of Transportation (DOTs) in the South-Central States and other places. The primary purpose of using deflection-based NDTs in network-level assessment is to identify a weak pavement section that requires further analysis at the project level. The falling weight deflectometer (FWD) test is one of the common NDT based tests utilized by highway agencies in assessing the performance of the flexible pavement. However, a robust method to evaluate pavement sections utilizing FWD data from all the sensors are seldom developed. There is always a …

Go to article

Bio-Binder—Innovative Asphalt Technology, Amir Tabakovic Dec 2020

Bio-Binder—Innovative Asphalt Technology, Amir Tabakovic

Articles

The global road network spans 16.3 million km [1], of which 5 million km is in the EU. These road networks fulfil major economic and social goals by facilitating the movement of goods and people throughout the EU, and are therefore of the utmost importance to the economic and social life of the EU [2]. National governments invest heavily in their road networks, e.g., in 2014, EUR 53.33 billion was invested in the development and maintenance of the EU road network [3]. Each year, the world produces 1.6 trillion tonnes of asphalt [4], of which 218 million tonnes is produced …

Go to article

Economic Analysis Of Productivity In The Irish Construction Sector, Kpmg, Fac, Róisín Murphy Dr, Avril Behan May 2020

Economic Analysis Of Productivity In The Irish Construction Sector, Kpmg, Fac, Róisín Murphy Dr, Avril Behan

Reports

Important strides to enhance productivity in the construction sector have been taken by both industry and Government in recent years. However, a collaborative, sectoral wide strategy to drive further increases in productivity is required, with the coordinated participation of all stakeholders across the full life cycle of a project. This report, commissioned by the Department of Public Expenditure and Reform (DPER), produced by KPMG and Future Analytics Consulting Ltd. (FAC) and peer reviewed by TU Dublin, aims to understand and address the reasons for low levels of productivity in the Irish construction sector and identify specific recommendations and actions that …

Go to article

Studies Of Oval Tube And Fin Heat Exchangers, Phillip Nielsen Apr 2020

Studies Of Oval Tube And Fin Heat Exchangers, Phillip Nielsen

Discovery Day - Prescott

Heating Ventilation and air-conditioning (HVAC) is a system which changes the temperature of the surroundings for the purposes of cooling or heating. This system requires energy to maintain a temperature difference from the outside temperature. This is important since minimized power is one of the requirements for the system to achieve a better efficiency. Optimizing the flow over the evaporator coils is one way to increase the cooling efficiency. This will reduce the power required to have a sustainable system. Optimizing the flow to increase the energy transfer between the fins and the incoming air could result in a greater …

Go to article

A Novel Self-Healing System: Towards A Sustainable Porous Asphalt, Shi Xu, Xueyan Liu, Amir Tabakovic, Erik Schlangen Mar 2020

A Novel Self-Healing System: Towards A Sustainable Porous Asphalt, Shi Xu, Xueyan Liu, Amir Tabakovic, Erik Schlangen

Articles

Self-healing asphalt, aimed to produce a sustainable asphalt pavement using green technology, has been studied in the past two decades. Technologies including encapsulated rejuvenator and induction heating have been proposed, demonstrated in the laboratory, and gradually evaluated in field application. This paper looks into the synergy effect of the above two technologies, where induction heating serves as the asphalt damage repair mechanism, requiring just 2 min heating time and encapsulated rejuvenator will replenish (rejuvenate) aged asphalt binder and reinstate bitumen’s healing ability. Moreover, the increased temperature from induction heating could in turn accelerate the diffusion process of rejuvenator into aged …

Go to article

Finding Patterns In Subsurface Using Bayesian Machine Learning Approach, Wang Hui Mar 2020

Finding Patterns In Subsurface Using Bayesian Machine Learning Approach, Wang Hui

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Stochastic simulation approaches and uncertainty quantification are usually adopted for gaining insight into variability in soil stratigraphy configurations. Previous investigations at geotechnical site characterization and interpretation can be broadly categorized into geostatistics- and process-based methods. On the other hand, modern site exploration techniques provide high-quality, dense datasets in physical spaces with high resolution, either directly from sensors (for example, cone penetration testing data) or indirectly from geophysical inversion (such as seismic inversion, electromagnetic induction inversion, and ground penetrating radar). In this work, anisotropy and heterogeneity are considered as possible patterns that inherently exist in the observations, and these are inferred …

Go to article

A Framework For Sustainable Procurement Practice In The Irish Construction Industry, Duga Jamus Ewuga Jan 2020

A Framework For Sustainable Procurement Practice In The Irish Construction Industry, Duga Jamus Ewuga

Doctoral

The Architectural, Engineering and Construction (AEC) sector has been called upon to develop innovative strategies to drive sustainability. Despite the efforts and commitments made, their performance is still observed to be low, this has been linked to the low level of understanding of practitioners. Also noted was the lack of interest by firms due to the uncertainty of the benefits of committing to long term investments. Nevertheless, academic literature and reports have stated that firms nowadays utilise their procurement mechanism to drive their sustainability practice. However, there is a gap in understanding how construction firms adopt and embed sustainability in …

Go to article

Why Are Residential Property Developers In Ireland Not Using Bim?, Bim Tudublin, Simon Burke Jan 2020

Why Are Residential Property Developers In Ireland Not Using Bim?, Bim Tudublin, Simon Burke

Capstone Reports

The aim of this paper is to establish the level of BIM adoption by larger-scale residential property developers in Ireland and investigate the benefits and challenges of implementing BIM for residential housing. While BIM is a relatively new concept in Ireland for housing, developers and investors in larger scale developments are beginning to recognize areas where BIM can add value to their projects. The research also indicates that while there is evidence of successful BIM implementation for housing resulting in savings in cost and time, widespread adoption is hindered by a lack of knowledge and skills, costs of implementation, lack …

Go to article

A Comparative Study Of Cadworx Plant 2018 And Revit 2020 With Ez-Iso Add-In, For The Production Of Piping Isometrics, Bim Tudublin, Killian Lynch Jan 2020

A Comparative Study Of Cadworx Plant 2018 And Revit 2020 With Ez-Iso Add-In, For The Production Of Piping Isometrics, Bim Tudublin, Killian Lynch

Capstone Reports

BIM software evaluation and selection is a complex process. In this paper, a comparative study of Revit 2020 with Ez-ISO add-in, and CADWorx Plant 2018, was carried out. The aim of this study was to determine if a MEP contractor could consolidate software usage into one package, thereby reducing costs for pipework modelling and isometric production. A comprehensive evaluation was developed based on a literature review. A multicriteria decision-making method was used in conjunction with the software evaluation to ensure sound choices were made. An online survey of senior BIM professionals was conducted to validate the analysis and findings. The …

Go to article

Steel Model Approval: Can Bim Provide A Drawing-Free Approval Process?, Bim Tudublin, David Reynolds Jan 2020

Steel Model Approval: Can Bim Provide A Drawing-Free Approval Process?, Bim Tudublin, David Reynolds

Capstone Reports

Despite widespread use of Building Information Modelling (BIM) software used within their industry, the approval of steelwork contractor’s design information is largely based on the approval of 2d-drawings. These workflows can be modernised to take advantage of current technology and provide productivity gains, but barriers to change exist. This research is an attempt to answer the research question of if a model-based approval process, which removes the need for drawings, is achievable. To answer this question, a mixed methodology was used. A literature review was performed to understand how the approval process works, what information is required and what BIM …

Go to article

A Critical Appraisal Of Findings And Solutions To Overcome Erroneous Bim Model Production And Information Delivery Workflows, Bim Tudublin, Ryan Forde Jan 2020

A Critical Appraisal Of Findings And Solutions To Overcome Erroneous Bim Model Production And Information Delivery Workflows, Bim Tudublin, Ryan Forde

Capstone Reports

There are many varying definitions of Building Information Modelling, all of which reflect its transformative capabilities and impact on the construction sector. BIM is an emerging technological and procedural shift within the AEC industry (Succar, 2009). BIM is not just a technological change, but also a procedural and workflow change (Charles Eastman, 2018). Despite the growth of BIM adoption and increasing levels of maturity regarding BIM standards, numerous issues still arise at a micro level during project execution. BIM invokes the need for workflows, frameworks and processes that imparts knowledge, heightens trust, increases efficiency and consistency while reducing fragmentation and …

Go to article

Can The Integration Of Bim And Gis Enhance Information Management For Large Scale Linear Infrastructure Projects?, Bim Tudublin, Brendan Kennedy Jan 2020

Can The Integration Of Bim And Gis Enhance Information Management For Large Scale Linear Infrastructure Projects?, Bim Tudublin, Brendan Kennedy

Capstone Reports

The integration of BIM and GIS is the subject of considerable research, particularly as the two coalesce for the purpose of information management. Large scale infrastructure projects require best practice in terms of how information is managed given the volume of information generated throughout the project lifecycle and the numerous parties requiring access to project content. This paper investigates whether the integration of BIM and GIS can enhance information management on large scale linear infrastructure projects. The research comprised a literature review and interviews with a number of BIM/GIS professionals actively working on linear infrastructure projects across the world. Some …

Go to article

Effect Of Fly Ash In Southeast Asia On The Properties Of Concrete, Thwe Thwe Win Jan 2020

Effect Of Fly Ash In Southeast Asia On The Properties Of Concrete, Thwe Thwe Win

Chulalongkorn University Theses and Dissertations (Chula ETD)

A wide use of fly ash (FA) as a supplementary cementitious material (SCM) can result in an enhancement in its durability performance in our civil engineering applications. Although FA is either agricultural or industrial by-product and is abundant for use in cement and concrete works for many decades now, the utilization of FA still has a practical challenge. The challenge is due to variability and their heterogeneity. In Southeast Asia, fly ash is used in concrete production replacing cement as a pozzolanic material. However, there are few standard guidelines for using fly ash across the region. This study evaluates the …

Go to article