Civil Engineering Commons^™

Durability Of Cement-Based Materials In Drinking Water Storage, Matthias Schwotzer, Andreas Gerdes

International Conference on Durability of Concrete Structures

In order to provide a hygienic storage drinking water reservoirs have been coated with mineral mortar linings in all epochs of European history. However, modern cement-based materials often show in this special operational environment an inadequate durability. Even though drinking water is commonly not considered particularly harmful to cementitious systems, the chemical degradation of mortar linings in drinking water storage systems can occur very fast compared to other common deterioration reactions. This results in cost intensive repair measures and thus high life-cycle costs as well associated with an ecological burden. Furthermore, an insufficient understanding of degradation mechanisms and their underlying …

Effect Of External Loading On Durability Properties Of Pre-Stressed Concrete Girders With Microcracking, Savitha Sagari Srinivasan, Raissa Douglas Ferron, Michael Rung

International Conference on Durability of Concrete Structures

Over the last fourteen years, very early in the service life of pre-stressed concrete girders, unexplained microcracks have been observed. Their presence led to concerns about the future integrity of the girders, with one of the major concerns being corrosion of pre-stressing strands. As such, a comprehensive study aimed at understanding the effects these microcracks have on the service life of the girders was initiated. Eight in-service girders, under external loads, and five rejected girders, not under external loads, were selected for the study. In this paper, we present work on the temporal evolution of the cracks during a one-year …

Influence Of Surface Retarders On Texture Profile And Durability Of Upper Layer Of Exposed Aggregate Concrete Pavement, Mariusz Dąbrowski, Miachał Antoni Glinicki, Karolina Gibas, Aneta Antolik, Kinga Dziedzic

International Conference on Durability of Concrete Structures

Exposed aggregate concrete (EAC) pavement technology is used in Poland for construction of major highways and expressways. When properly executed, it is an efficient technique to provide desired friction for skid resistance without compromising the noise limitations. Concrete mix uniformity, proper dosing of retarding agent and optimal time to brush with a mechanical broom are supposed to have a major impact on the properties of the upper pavement layer. An experimental investigation was performed on exposed aggregate concrete specimens manufactured in the laboratory in a way to simulate the industrial production of two-layer concrete slab with exposed aggregate. The texture …

Freeze-Thaw Resistance Of Concrete: Insight From Microstructural Properties, Sam Adu-Amankwah, Leon Black Dr, M Zajac, J Skoceck, M Ben Haha

International Conference on Durability of Concrete Structures

Composite cements offer low carbon alternatives to conventional CEM I. These binders also generally tend to perform better than CEM I in aggressive chemical environments. However, their freeze-thaw resistance, evident through surface scaling and internal damage is usually impaired. Postulated theories on freeze-thaw induced damage do not fully explain the origin of this weakness in composite cement concretes.

This paper systematically presents the phase assemblage changes associated with the freeze-thaw of concrete specimen made from composite cements with and without limestone. The freeze-thaw test was performed on concrete according to CIF method based on CEN/TR 15177 and the corresponding cement …

Influence Of Exposure Environments On The Durability Of Slag-Blended Cements, Joseph Onah Ukpata, P. A. M. Basheer, Leon Black

International Conference on Durability of Concrete Structures

Both chlorides and sulphates combine in seawater to affect the durability of reinforced concrete structures located in marine environments. This paper presents the results of an experimental study on slag blended cement systems, cured for 7 days, before exposure to a combined solution of sodium chloride (30 g/L) and sodium sulphate (3 g/L). Two slags of different chemical compositions, designated as slags 1 and 2 were respectively blended with Portland cement CEM I 52.5R at 30 and 70 wt.% replacement levels. Mechanical tests on mortar samples were complemented by microstructural examination and chemical characterisation on paste samples, all using a …

Fib Model Code 2020 – Durability Design And Through Life Management Of New And Existing Structures, Frank Papworth, S Matthews

International Conference on Durability of Concrete Structures

Work has recently started in fib (Fédération Internationale du Béton) on the preparation of a new fib Model Code for Concrete Structures, under the working title of Model Code 2020 (MC2020). This will be a single code dealing with both new and existing concrete structures, that is both the design of new structures and all the activities associated with the assessment, interventions and the through-life management and care of existing concrete structures. Numerous goals relating to durability and service life design have been identified, including that ideally MC2020 should incorporate:

• Better models for deterioration processes addressing issues such as …

Absorption, Porosity, Capillarity And Chloride Diffusion In Ultra High Performance Concretes, José Manuel Gandia-Romero, José Enrique Ramón-Zamora, Isabel Gasch, Manuel Valcuende, Rafael Calabuig, Victor Calvet, Pedro Serna

International Conference on Durability of Concrete Structures

Concrete durability performance can be assessed by a number of parameters, among which permeability properties are key. In this experimental work, the permeability to water and the diffusion of chlorides in Ultra High Performance Concrete (UHPC) are studied. To this end, three types of concrete were made: two Ultra High Performance (one with fibers and one without fibers) and a Conventional Concrete (CC) of w/c ratio equal to 0.5. The compressive strength of Ultra High Performance Concretes was 130 MPa, and that of conventional concrete was 50 MPa. All of them were cured at a temperature of 20°C and RH …

Performance Of Concrete Made With A Calcined Clay – Limestone-Portland Cement Exposed To Natural Conditions, Fernando Martirena, Ernesto Díaz, Dayran Rocha, Hamed Maraghechi, Karen Louise Scrivener

International Conference on Durability of Concrete Structures

This work presents the results of an investigation carried out to assess durability of concrete made with a calcined clay- limestone-Portland cement with 47% of clinker, hereafter named LC3, produced during an industrial trial in 2013. LC3 was used to cast concrete blocks and later expose them at a natural location at the northern coast of Cuba. Reference concrete was cast with Cuban Portland cement having 88% of clinker. Throughout three years (2015, 2016, 2017) concrete cores were systematically taken and the specimens were subjected to a testing program that included Formation factor, chloride profiling, surface resistivity, air permeability and …

Enhancement Of Durability Characteristics Of Geopolymer Concrete With Manufactured Sand, Abdul Aleem, T Shanmuga Priya

International Conference on Durability of Concrete Structures

Geopolymer Concrete is the concrete made without using any quantity of cement. Instead the waste material from the thermal power station called fly ash is used as the binding material. This fly ash reacts with alkaline solution like sodium hydroxide (NaOH) and sodium silicate (Na2SiO3) and forms a gel which binds the fine and coarse aggregates. Similarly another artificial material called manufactured sand (M-Sand) is also used as the fine aggregate against the normal river sand. The durability of Geopolymer Concrete with M-sand was studied by casting cubes of size 100 x 100 x 100 mm. The cube specimens were …

Impact Of Water Content On The Performance Of Alkali-Activated Slag Concretes, Susan A. Bernal, John L. Provis, Jannie S.J. Van Deventer

International Conference on Durability of Concrete Structures

In this study, we report the effect of varying the water/binder (w/b) ratio on the performance of sodium silicate activated concretes. Compressive strength development and water transport properties of these concretes were assessed, along with their resistance to carbonation. The results demonstrate that varying the water content within a reasonable range induced negligible changes in the compressive strengths of these concretes, when a constant paste content was used. A direct correlation between the w/b ratio and the amount of permeable voids in the concretes was not identified. The carbonation behaviour of these concretes changes prominently depending on the CO2 concentration …

Design And Predicting Performance Of Carbon Nanotube Reinforced Cementitious Materials : Mechanical Properties And Dispersion Characteristics., Mahyar Ramezani

Electronic Theses and Dissertations

Recently, Carbon Nanotubes (CNTs) are drawing considerable attention of researchers for reinforcing cementitious materials due to their excellent mechanical properties and high aspect ratio (length-to-diameter ratio). However, CNTs might not disperse well within the cement matrix, resulting in little improvement or even degradation of concrete properties. The uncertainty in producing the consistent results in different studies might be attributed to multiple interactions between the experimental variables affecting the nanotube dispersion and the final properties of CNT-cement nanocomposites. Therefore, this research mainly focused on proposing equations that can reliably capture these interactions in order to correlate CNT dispersion with the mechanical …

Morphology And Detection Of Corrosion On Stainless Steel Reinforcement In Concrete, Julio J. Saire Yanez

USF Tampa Graduate Theses and Dissertations

Stainless steel (SS) has emerged as an alternative corrosion-resistant reinforcement in concrete instead of the commonly used carbon steel (CS). The biggest advantage of SS is that it takes more time for corrosion to initiate than for CS. An additional benefit from the use of SS in concrete may be derived from the period after the corrosion started until the concrete structure reaches a limit state. This period is called corrosion propagation stage (CPS) and it has been hardly studied in SS reinforced structures. The duration of this period could be related, among other factors, to the morphology of corrosion …

Effect Of Specimen Thicknesses On Water Absorption And Flexural Strength Of Cfrp Laminates Subjected To Water Or Alkaline Solution Immersion, Xue Zhang, Yanlei Wang, Baolin Wan, Gaochuang Cai, Yuan Qu

Civil and Environmental Engineering Faculty Research and Publications

In this paper, an experimental research was undertaken to investigate the effect of specimen thicknesses on water absorptions and flexural strengths of wet lay-up CFRP laminates subjected to distilled water or alkaline solution immersion up to 180 days. Test results showed that the water uptake and flexural strength retention of CFRP laminates were significantly affected by the adopted specimen thickness. For the same aging time, the water uptake of CFRP laminates decreased in the early stage of immersion and increased in the later stage of immersion with the increase of specimen thickness. Meanwhile, the flexural strength retention generally increased as …

Reducing The Porosity And Sealing Cracks By Using Crystalline Admixture In Conventional Concrete, Visar Krelani, Liberato Ferrara

International Journal of Business and Technology

There is a continuous increase of quality on civil engineering materials in developed countries and parallel increase of need for new constructions in developing countries. Professional community should propose solutions for the durability that can resist in different severe environments. The most important factor that can affect concrete durability is represented by the pore distribution. Transport properties can take place through the porous network inside the cementitious composites and the aggregates interface, permitting the ingress of aggressive agents damaging concrete function intrinsically as a material and the wellfunctioning of the entire structure. The use of a crystalline admixture during the …

Long-Term Durability Of Frp Bond In The Midwest United States For Externally-Strengthened Bridge Components, Sasan Siavashi, Christopher D. Eamon, Abdel A. Makkawy, Hwai-Chung Wu

Civil and Environmental Engineering Faculty Research Publications

In this study, the bond strength of a typical FRP system subjected to long-term natural weathering in the Midwest United States is experimentally investigated, and the rate of degradation is estimated. To do this, the bond strength of an FRP system exposed to over fifteen years of weathering is determined with pull-off testing, and a relationship between strength reduction and exposure time is developed using regression analysis. For unweathered specimens, it was found that the attachment strength of the FRP system was governed by the concrete substrate, while for weathered specimens, the FRP system could detach by either a failure …

Self-Healing Microcapsules As Concrete Aggregates For Corrosion Inhibition In Reinforced Concrete, Homero Castaneda, Marwa Hassan, Miladin Radovic, Jose Milla

Data

Corresponding data set for Tran-SET Project No. 17CLSU08. Abstract of the final report is stated below for reference:

"Reinforced Concrete (RC) structures are vital to the US’s civil infrastructure for their strength and versatility. Unfortunately, RC elements deteriorate rapidly when exposed to corrosive environments. One possible solution is to extend the life of RC elements and systems using microencapsulated corrosion inhibitors to reduce the rebar corrosion rate. The capsules house an anodic corrosion inhibitor agent including calcium nitrate (CN) and triethanolamine (TEA). The integration of such microencapsulated materials will enhance the durability and extend the useful life by controlling the …

Self-Healing Microcapsules As Concrete Aggregates For Corrosion Inhibition In Reinforced Concrete, Homero Castaneda, Marwa Hassan, Miladin Radovic, Jose Milla

Publications

Reinforced Concrete (RC) structures are vital to the US’s civil infrastructure for their strength and versatility. Unfortunately, RC elements deteriorate rapidly when exposed to corrosive environments. One possible solution is to extend the life of RC elements and systems using microencapsulated corrosion inhibitors to reduce the rebar corrosion rate. The capsules house an anodic corrosion inhibitor agent including calcium nitrate (CN) and triethanolamine (TEA). The integration of such microencapsulated materials will enhance the durability and extend the useful life by controlling the corrosion precursors and the corrosion process during damage evolution. Therefore, this work aims to develop and characterize the …

Investigations On Frp-Concrete Bond, Mostfa Al Azzawi

USF Tampa Graduate Theses and Dissertations

This dissertation presents findings from three separate investigations, a laboratory study and two field studies that evaluated the durability of the Fiber Reinforced Polymer (FRP)-concrete bond. The laboratory study explored the role of porosity on CFRP-concrete bond following immersion in warm water. Two disparate field studies measured residual bond after 20 years outdoor exposure of FRP repairs of full-size masonry walls and after 12 years for partially submerged piles supporting the Friendship Trail Bridge, Tampa Bay.

The ACI 440 code requires the same surface preparation for all externally bonded FRP concrete repairs. This disregards the role of porosity that is …

Addressing Clay Mineralogy Effects On Performance Of Chemically Stabilized Expansive Soils Subjected To Seasonal Wetting And Drying, Bhaskar C.S. Chittoori, Anand J. Puppala, Aravind Pedarla

Civil Engineering Faculty Publications and Presentations

Premature failures in chemically stabilized expansive soils cause millions of dollars in maintenance and repair costs. One of the reasons for these failures is the inability of existing stabilization design guidelines to consider the complex interactions between clay minerals and the stabilizers. It is vital to understand these complex interactions, as they are responsible for the strength improvement and swell/shrink reduction in these soils, in turn affecting the overall health of the infrastructure. Hence, this research study examined the longevity of chemically stabilized expansive soils subjected to wetting/drying conditions with a major focus on clay mineralogy. Eight different natural soils …

Combining Non-Destructive Tests To Improve The Reliability Of Evaluating Concrete Quality, Afra Al Asri Mohammed Obaid Al Dhaheri

Civil and Environmental Theses

Non-destructive tests (NDT) are commonly used in construction to evaluate concrete quality for both existing structures and during construction. The reliability of these tests have been questioned. This thesis is concerned with evaluating concrete strength and durability using different non-destructive tests (NDT). Also, it focuses on applying different combination of NDT to predict the concrete strength and durability using regression models. The main objective of the study was to investigate how to improve the reliability of nondestructive tests NDT to evaluate the concrete quality by combining more than one NDT test for concrete mixtures commonly used in Al Ain city, …

Reducing The Porosity And Sealing Cracks By Using Crystalline Admixture In Conventional Concrete, Visar Krelani, Liberato Ferrara

UBT International Conference

There is a continuous increase of quality on civil engineering materials in developed countries and parallel increase of need for new constructions in developing countries. Professional community should propose solutions for the durability that can resist in different severe environments. The most important factor that can affect concrete durability is represented by the pore distribution. Transport properties can take place through the porous network inside the cementitious composites and the aggregates interface, permitting the ingress of aggressive agents damaging concrete function intrinsically as a material and the wellfunctioning of the entire structure. The use of a crystalline admixture during the …

A Comparative Study On The Durability Of Geopolymer Mortars Produced With Ground Glass Fiber, Fly Ash, And Glass-Powder In Sodium Sulfate Solution, Hassan Rashidian-Dezfouli, Prasada Rao Rangaraju

Publications

An experimental investigation was conducted to investigate the performance of geopolymers made with three different precursors consisting of fly ash, Ground Glass Fiber (GGF), and Glass-Powder (GLP) exposed to sodium sulfate solution. Precursors were activated using either sodium hydroxide solution or combinations of sodium hydroxide and sodium silicate solution with varying levels of sodium and silica content. Among the mixtures with each of the three precursors, mortar mixtures with the highest compressive strength were selected to test their resistance against exposure to a 5% sodium sulfate solution. Changes in the weight and compressive strength of the specimens were monitored up …

Mitigation And Evaluation Of Alkali-Silica Reaction (Asr) And Freezing And Thawing In Concrete Transportation Structures, Richard Albert Deschenes Jr.

Graduate Theses and Dissertations

An evaluation of alkali-silica reaction (ASR) and freezing and thawing (F/T) in concrete transportation structures is presented along with mitigation methods for slowing the rate of deterioration in concrete. A combination of field and laboratory testing confirms ASR deterioration is exacerbated by exposure to F/T. Laboratory testing indicates an aggregate previously deemed inert to ASR, caused ASR deterioration in several concrete pavement and transportation structures. Existing standard test methods deem this aggregate safe for use in concrete. A modified test method shows the concrete can deteriorate rapidly when subjected to cycles of conditions promoting ASR and F/T. Several structures containing …

High Early-Age Strength Concrete For Rapid Repair, Matthew O. Maler

UNLV Theses, Dissertations, Professional Papers, and Capstones

The aim of this research was to identify High Early-Age Strength (HES) concrete batch designs, and evaluate their suitability for use in the rapid repair of highways and bridge decks. To this end, two criteria needed to be met; a minimum compressive strength of 20.68 MPa (3000 psi) in no later than 12 hours, and a drying shrinkage of less than 0.06 % at 28 days after curing. The evaluations included both air-entrained, and non-air-entrained concretes.

The cement types chosen for this study included Type III and Type V Portland cement and “Rapid Set” − a Calcium Sulfoaluminate (CSA) cement. …

Polyvinyl Alcohol (Pva) Fiber-Reinforced Rubber Concrete And Rubberized Self-Compacting Concrete, Jiaqing Wang

Dissertations, Master's Theses and Master's Reports

This study experimentally investigates the mechanical performance and durability of Polyvinyl Alcohol (PVA) fiber-reinforced rubber concrete and the rubberized self-compacting concrete. The waste rubber particles were introduced as a partial replacement of fine aggregate in the plain concrete. In addition, the waste tire rubbers were pre-treated with alkali surface treatment method to enhance the performance. The PVA fibers were added to the concrete mixes to enhance the post-failure resistance and thus fracture energy. Rubberized fiber concrete samples were prepared with different fine aggregate replacement ratios and the optimum fiber content. At the same time, the rubber particles had been used …

Sulfate Resistance Of Nanosilica Contained Portland Cement Mortars, Iani Batilov Batilov

UNLV Theses, Dissertations, Professional Papers, and Capstones

Soils, sea water and ground water high in sulfates are commonly encountered hostile environments that can attack the structure of concrete via chemical and physical mechanisms which can lead to costly repairs or replacement. Sulfate attack is a slow acting deteriorative phenomenon that can result in cracking, spalling, expansion, increased permeability, paste-to-aggregate bond loss, paste softening, strength loss, and ultimately, progressive failure of concrete. In the presented research study, Portland cement (PC) mortars containing 1.5% to 6.0% nanosilica (nS) cement replacement by weight were tested for sulfate resistance through full submersion in sodium sulfate to simulate external sulfate attack. Mortars …

Alkali-Activated Natural Pozzolan/Slag Binder For Sustainable Concrete, Meysam Najimi

UNLV Theses, Dissertations, Professional Papers, and Capstones

This study aimed to fully replace Portland cement (PC) with environmentally friendly binders capable of improving longevity of concrete. The new binders consisted of different proportions of natural Pozzolan and slag which were alkaline-activated with various combinations of sodium hydroxide and sodium silicate. A step-by-step research program was designed to (1) develop alkali-activated natural Pozzolan/slag pastes with adequate fresh and strength properties, (2) produce alkali-activated natural Pozzolan/slag mortars to assess the effects of dominant variables on their plastic and hardened properties, and (3) finally produce and assess fresh, mechanical, dimensional, transport and durability properties of alkali-activated natural Pozzolan/slag concretes. The …

Improving The Laboratory Design Of Asphalt Mixtures To Enhance Asphalt Pavement Durability, Ali Hekmatfar

Open Access Dissertations

Most departments of transportation, including Indiana’s, currently use the Superpave mixture design method to design asphalt mixtures. This method specifies that the optimum asphalt content for a given gradation be selected at 4 percent air voids. During construction, these mixtures are typically compacted to 7-8 percent air voids. If mixtures were designed to be more compactable in the field they could be compacted to the same density as the laboratory mixture design, which would increase pavement durability by decreasing the in-place air voids. The objective of this research was to enhance the asphalt mixture design method in order to increase …

Progress In Durability Study Of Frp Materials, Zeng-Zhu Zhu, Ying-Wu Zhou, Li-Li Sui, Feng Xing, Jia Du

International Conference on Durability of Concrete Structures

During the past decades, FRP strengthened RC structures have attracted worldwide interest in both application and research. Nowadays, as more and more infrastructures are being suffered from severe corrosions due to harsh and extreme environments, the durability of FRP strengthened RC structures has generally emerged as the most important issue in research. Thus, the paper presents the latest progress in durability study of the FRP materials through an in-depth review and analysis on existing extensive investigations. The time-dependent performances of two types of FRP materials of carbon FRP (CFRP) and glass FRP (GFRP) under severe environments of humidity, high temperature, …

Research On Concrete Durability Improving For Existing Island-Building And Its Application, Mao Jianghong, Zhu Yaofeng, Xu Fangyuan, Jin Weiliang, Xu Yidong, Chen Xu

International Conference on Durability of Concrete Structures

China’s coastal cities contain a large number of islands with abundant human activities, in which buildings are in a typical marine corrosion environment and the corrosion of reinforced concrete structures is very prominent. This paper makes research work on two aspects: (1) the durability assessment and durability improvement after a thorough investigation of the architecture of Xiangtan County, Ningbo city, on an island and (2) the application research of the bidirectional electromigration rehabilitation (BIEM) technology to enhance the durability of existing island building life. This paper designs a set of BIEM equipment based on solar power supply and develops a …