Civil Engineering Commons^™

Performance-Related Specifications For Concrete Bridge Superstructures, Volume 4: Bond Of Epoxy-Coated Bars With Thicker Coatings, J. A. Ramirez, Michael K. Appelhans

JTRP Technical Reports

In Volume 4 of the final report, the results of an evaluation of the bond performance of epoxy-coated bars with a coating thickness up to 18 mils are presented. The experimental work on the bond performance of epoxy-coated bars with thickness up to 18 mils indicates that the current AASHTO requirements for development length of epoxy-coated bars up to #8 could be safely extended to coating thickness of up to 18 mils. Thus, no change to the bond specifications is recommended in order to implement the use of bars with diameters up to a #8 with epoxy-coating thickness up to …

Performance-Related Specifications For Concrete Bridge Superstructures, Volume 3: Nonmetallic Reinforcement, Robert J. Frosch, Christopher P. Mosley, Ahmet Koray Tureyen

JTRP Technical Reports

In Volume 3 of the final report, research work conducted to investigate the behavior of fiber reinforced polymer (FRP) reinforcement is summarized. This study focused on the behavior of FRP reinforced concrete structures with an emphasis on bond and shear. For the bond investigation, three series of beam splice tests were performed on specimens reinforced with steel, glass FRP, and aramid FRP to determine the effect of the different types of reinforcement on bond, cracking, and deflections. The test results indicate that the use of FRP reinforcement leads to lower bond strengths and, therefore, require longer development lengths. The specimen …

Development And Evaluation Of Cement-Based Materials For Repair Of Corrosion-Damaged Reinforced Concrete Slabs, Rongtang Liu, J. Olek

JTRP Technical Reports

In this study, the results of an extensive laboratory investigation conducted to evaluate the properties of concrete mixes used as patching materials to repair reinforced concrete slabs damaged by corrosion are reported. Seven special concrete mixes containing various combinations of chemical or mineral admixtures were developed and used as a patching material to improve the durability of the repaired slabs. Physical and mechanical properties of these mixes, such as compressive strength, static modulus of elasticity, dynamic modulus of elasticity, and shrinkage were evaluated. Durability-related parameters investigated included resistance of concrete to penetration of chloride ions and freeze-thaw resistance. The results …

Performance Of Bridge Decks And Girders With Lightweight Aggregate Concrete, V. 2 Of 2, J. A. Ramirez, J. Olek, Eric Joseph Rolle, Brian Joseph Malone

JTRP Technical Reports

Structural lightweight concrete is a very versatile material and Haydite and Minergy lightweight aggregates can be utilized in the mixture development of concrete for use in girders and decks in bridges. More widespread use of lightweight aggregates (LWA) would result in savings in construction cost due to considerable dead load reduction.

The materials phase of this research study evaluated the fresh concrete properties (slump, unit weight, and air content), the mechanical properties of hardened concrete (compressive strength, tensile strength, flexural strength, static and dynamic modulus of elasticity, Poisson’s Ratio, and temperature development), and durability related parameters (air void distribution, freeze-that …

Performance Of Bridge Decks And Girders With Lightweight Aggregate Concrete, J. A. Ramirez, J. Olek, Eric Joseph Rolle, Brian J. Manlone

JTRP Technical Reports

Structural lightweight concrete is a very versatile material and Haydite and Minergy lightweight aggregates can be utilized in the mixture development of concrete for use in girders and decks in bridges. More widespread use of lightweight aggregates (LWA) would result in savings in construction cost due to considerable dead load reduction. The materials phase of this research study evaluated the fresh concrete properties (slump, unit weight, and air content), the mechanical properties of hardened concrete (compressive strength, tensile strength, flexural strength, static and dynamic modulus of elasticity, Poisson’s Ratio, and temperature development), and durability related parameters (air void distribution, freeze-thaw …

Concrete Cracking In Coastal Areas, S. R. Mpinzire

Tanzania Journal of Engineering and Technology (TJET)

The paper discusses cracking and corrosion of reinforced concrete (RC) structures in coastal zones where aggressive action of salt burdened air is the primary cause of concrete deterioration. Case studies are presented, along with discussion of possible remedies including local demolition, reconstruction and epoxy injection as well as concrete treatment.

Methods Of Corrosion Protection And Durability Of Concrete Bridge Decks Reinforced With Epoxy-Coated Bars - Phase I, Lisa Michele Samples, J. A. Ramirez

JTRP Technical Reports

In this study, the results of an extensive field and laboratory investigation conducted to evaluate the corrosion performance of epoxy-coated reinforcement are reported. One hundred and twenty three concrete bridge decks containing epoxy-coated reinforcement, uncoated reinforcement, and various other corrosion protection systems were included in a field investigation. An initial visual inspection of these bridge decks showed that 44% had signs of distress from corrosion of the reinforcement. Six decks, representing 5% of the total sample, were selected for a second more detailed survey. Three of the six decks had epoxy-coated reinforcement. This number represents 11% of the total sample …

The Short-Term Effects Of Mortars On Salt Movement In Stone, Simon H. Perry, Aidan Duffy

Articles

Salt-induced decay processes are one of the most important reasons for the decay of many stone buildings and monuments. This paper investigates the role played by masonry mortars in the movement of salts within Baumberger sandstone and Portland limestone. The methodology used involved the monitoring of stone units containing mortar joints which were exposed to a city-centre environment. Rain-water run-off was collected from the stone/mortar units during the exposure period; the units were subsequently destructively analysed. The methods of run-off and destructive sample analysis used included ion chromatography and atomic absorption spectrophotometry; stone and mortar samples were also analysed petrographically. …

Testing Of Multi-Span Bridges With Full Span Precast Prestressed Concrete Panels (Phase 1), Robert J. Peterman, J. A. Ramirez

JTRP Technical Reports

The purpose of this study was to assess the behavior and durability of multi-span bridges constructed with full-span prestressed concrete form panels. The use of full-span prestressed concrete form panels for bridges with spans of 40 ft. or less is an economical method of construction due to the reduction of on-site formwork and labor required by alternate cast-in-place systems. In this research, a pair of two-span bridges utilizing full-span prestressed concrete form panels were fabricated and tested in the Karl H. Kettelhut Structural Engineering Laboratory at Purdue University. Time-dependent effects were monitored during the cast-in-place (CIP) concrete cure period of …

Repointing Mortars For Conservation Of A Historic Stone Building In Trinity College, Dublin, Aidan Duffy, Tim P. Cooper, Simon H. Perry

Articles

With atmospheric pollution causing building stone to decay at accelerated rates, conservation of historic stone monuments is becoming an increasingly important issue. Mortar joints have a marked effect on how moisture moves in a wall and, hence, on how the wall weathers. Not only does mortar bind stones together, but also a good mortar will prevent the ingress of moisture (and pollutants), enable the buildings to dry out, accommodate movement and will not act as a source of harmful chemicals capable of attacking the surrounding stone. Thus, poor mortar can have deleterious effects on the stonework. This paper, which is …

Reconstruction Work Upon Solima Pier, K Alibhai

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions