Civil Engineering Commons^™

Enhancing Frp-To-Concrete Bond Behavior By Epoxy Ribs, Cheng Jiang, Baolin Wan, John Omboko

Civil and Environmental Engineering Faculty Research and Publications

The bond between external bonding (EB) of fiber reinforced polymer (FRP) composite materials to concrete is the weakest link in the strengthened concrete flexural members. There are three mechanisms to transfer the interfacial shear between FRP and the concrete substrate, i.e., adhesion, interlocking and friction. This paper proposes a new approach by grooving on the concrete surface before applying epoxy to make epoxy ribs to increase interlocking. An experimental program was conducted to verify the effectiveness of the proposed epoxy ribs. Six grooves perpendicular to the fiber direction were cut on the bonding surface of the concrete blocks. The grooves …

Investigating Early Age Behavior Of Portland Cement Concrete In Arid Regions, Evan Wolf

Open Access Theses & Dissertations

The early-age behavior and properties of portland cement concrete change rapidly over time as a result of the hydration process. Comprised of a series of chemical reactions, this process accelerates nonlinearly with the curing temperature. Gaining knowledge and understanding of the phases of the hydration process (i.e., dormant, setting, and hardening) plays an important role in the timely opening of roads, resuming of construction, and achieving long-term performance. Standard tests such as ASTM C403 arbitrarily define the time of initial and final setting of concrete. Despite decades of studies concerning setting times, actual predictions still span hours, while the quality …

Quantitative Non-Destructive Evaluation (Nde) Of Frp Laminate-Concrete Bond Strength, Mina Riad

Civil Engineering Dissertations - Archive

Repair and rehabilitation methods for civil infrastructure have become a topic of great interest to engineers. Fiber Reinforced Polymer (FRP) is considered as one of the most popular and practical solutions for strengthening and retrofitting of civil infrastructure. Several past studies indicated that significant increase in strength and stiffness can be achieved by using this technology. The FRP-concrete interface bond is critical in transferring stresses from the concrete surface to the FRP. However, the evaluation of the bond strength is still a challenging issue. To evaluate the bond strength using non-destructive techniques, 32 concrete beams strengthened with FRP using different …

Testing And Modeling Of The Thixotropic Behavior Of Cementitious Materials., Bashir Hasanzadeh

Electronic Theses and Dissertations

During construction, concrete goes under various operations. It is normally transported to the job site, be placed and consolidated in the formwork, etc. The easiness and quality of these operations are very much related to the intrinsic rheological properties of concrete. Therefore, a good understanding of rheological behavior of concrete under various conditions are needed. Thixotropy is an important part of rheology. The thixotropic behaviors of concrete can be good representatives of its flow behaviors on the job site. For example, the breakdown aspect of thixotropy can help to explain how its flow behavior can impact concrete pumping and its …

Reducing The Porosity And Sealing Cracks By Using Crystalline Admixture In Conventional Concrete, Visar Krelani, Liberato Ferrara

UBT International Conference

There is a continuous increase of quality on civil engineering materials in developed countries and parallel increase of need for new constructions in developing countries. Professional community should propose solutions for the durability that can resist in different severe environments. The most important factor that can affect concrete durability is represented by the pore distribution. Transport properties can take place through the porous network inside the cementitious composites and the aggregates interface, permitting the ingress of aggressive agents damaging concrete function intrinsically as a material and the wellfunctioning of the entire structure. The use of a crystalline admixture during the …

Using Of Proper Pavement Material For The Intersections With Slow-Moving Traffic, Bekim Selimi

UBT International Conference

Use of proper pavement material for some of intersections need special attention by road designers. At Camp Bondsteel-Kosovo on 2002 were built four road intersections using the concrete as pavement material. Heavy and slow-moving trucks that are turning or accelerating exposed these intersections to some of the highest stress level. After some years this intresections start deteriorating on their surface due to friction. The concrete pavements did not survive this period of usage and after eight years were removed and replaced with asphalt pavements. After more than seven years, the asphalt has shown minor distress but is still in good …

Performance Evaluation Of Rice Husk Ash (Rha) Modified Concrete, Mohammad Badrul Ahsan

Student Theses and Dissertations

Rice husk ash (RHA) is an agricultural by-product that has the potential of a pozzolanic material. It can be used as a partial replacement of Ordinary Portland Cement (OPC) in concrete. The present study investigates the performance of RHA-modified concrete with two amounts (10% and 20% by weight) of three types of RHA. Test results of RHA-modified concrete samples have been compared with those of the Control (no RHA) as well as concrete modified with a commonly used modifier called Class C fly ash (CFA) with 10% replacement. Effects of alkali-silica reaction (ASR) and deicing chemicals have also been evaluated …

Shrinkage Cracking In Concrete Tilt-Up Construction, Stewart Hooks, Jack Robinson

Architectural Engineering

The purpose of this project is to investigate a particular, undesirable cracking pattern in concrete tilt-up panels that, until now, did not have a known definite cause. The cause of this cracking pattern is hypothesized to be due to shrinkage restraint of the concrete panels. The cracking under investigation occurs at the bottom corners of the Tilt-Up panels, suggesting that the base of the panel is restrained from shrinkage. This project models various components of Tilt-Up Construction that have potential for restraining the panels from shrinking. This project consists of the following main components.

The first aspect of this project …

Fluid Isolator, Purdue Ect Team

ECT Fact Sheets Archive

The reliability of concrete infrastructure is vital to ensuring daily life, as well as commerce, can progress without interruption. From the pavement of interstate highways to the driveways and sidewalks in a local neighborhood, concrete is expensive to install and often even more expensive, and intrusive, when it needs to be replaced. Unfortunately, to maintain functionality in winter climates concrete is heavily exposed to deicing salts. This not only affects the roads, driveways, and sidewalks where salt is applied directly, but many other areas such as parking and residential garages where vehicles (and people) will track salt along with water …

Electrochemical Methods To Characterize Drilled Shaft Deficiencies, Sarah Jo Mobley

USF Tampa Graduate Theses and Dissertations

In recent years drilled shafts have become the preferred foundation method for marine bridges. Typically, the drilled shaft is selected over traditional driven piles due to soil strata encountered, construction economy, increased lateral stiffness requirements, and/or vibration control considerations. The most critical component in drilled shaft construction is borehole stabilization. Wall sloughing or groundwater inclusion can have devastating effects on the strength of the finished shaft however recent research has shown that the materials, more specifically the slurry, used to accomplish stabilization may be having a negative impact on the durability of the finished product. This thesis investigates the durability …

Compressive Strength Relative To Sustainable Materials In Concrete, Brad Harvey

Williams Honors College, Honors Research Projects

The objective of this study is to determine how integrating abundant waste materials into concrete affects its compressive strength. This research will be used to benefit the construction industry by replacing a portion of a conventional concrete mix (cement, stone, sand, and water) with more sustainable materials. In order to create a more sustainable concrete mixture, the following mix design and methodology was followed.

The initial step was to create an updatable MS Excel spreadsheet to aid in the mix development (the spreadsheet is shown in Appendix A). These sheets allowed for easy transitions from one mix to another by …

Chemical Modification Of Crumb Rubber To Increase Its Bonding With Concrete, Mary T. Mccannon, Kendall J. Sweitzer

Williams Honors College, Honors Research Projects

The hydrophilicity of crumb rubber was increased with wet chemical modification and added to concrete to increase its adhesion with concrete, consequently the compressive strength relative to that of concrete with untreated rubber. Other modification methods were tested on crumb rubber and rubber sheets to yield an increase in hydrophilicity. Certain tests were less reliable for powder testing or tedious and time consuming and concrete materials and rubber may not be homogeneous.

For wet chemical modification, several approaches were attempted. First, crumb rubber was soaked in 5% sodium hydroxide, 5% potassium permanganate and saturated sodium bisulfite, tested for hydrophilicity using …

Reflectivity Of Light Emitting Diodes (Led) And Incandescent Lights On Concrete And Asphalt Pavements., Jeremy Elliott Rice

Electronic Theses and Dissertations

The purpose of this study is to investigate the reflectivity of light on concrete and asphalt pavement systems. In 1983, the Illuminating Engineering Society (IES) published the first recommended practice (RP-8) for the design of roadway and parking lot lighting. This design method implemented empirically tested factors which were defined as the “reduced luminance coefficients” or the R-Tables. The R-Tables are essential for proper design of light pole installation dimensions, required power, and the distribution of light. The originally tested pavements are not necessarily representative of modern pavement materials used today. Moreover, recent Light Emitting Diodes (LED) are a relatively …

Feasibility Study Of Using Recyclable Polyethylene (Pet) Materials As Coarse Aggregate For Concrete Mixtures, Philip M. Angelo

Construction Management

The feasibility of using recyclable household plastics, specifically those made of polyethylene, commonly used in water and soda bottles, as a replacement for concrete coarse aggregate, was assessed. A method was developed for cutting polyethylene materials into fibrous strips. These strips were then used as a replacement for the rock coarse aggregate in batches of concrete. Standard 6” x 12” test cylinders were made using the concrete mixture and subject to destructive compressive testing in order to yield the compressive strength of the concrete mix 7, 14, 21, and 28 days after pouring. Three mixtures were tested, one control with …

Alkali Silica Reaction In Concrete Made From Arkansas Region, Adithya Reddy Mallu

Theses and Dissertations

Alkali-Silica Reaction is an unwanted reaction which occurs over time between cement paste and silica. This in turn alters the expansion of the aggregate and often in an unpredictable way, which will result in loss of strength of concrete and complete failure. This research studies the effects of using locally available coarse and fine aggregates available in Arkansas. This research will provide the necessary information in selecting the type of aggregate that is to be used in constructions and a viable comparison between different aggregates available in Arkansas have been made. Different materials used for preparation of concrete samples have …

Edge Detection Of Concrete Mesostructure Based On Dis Operator, Bin Feng, Zicheng Xu, Jin Xia, Shijie Jin, Weiliang Jin

International Conference on Durability of Concrete Structures

Aggregate edge detection is the basis of creating concrete mesoscale model, which is applied to analyze concrete mesoscale characteristics. A concrete digital image edge detection method using DIS operator is presented in this paper. Mean filter, multi-scale filter, and Gaussian filter are compared on the effect of concrete image noise reduction. Based on the result, Gaussian filter is the most optimum method to reduce image noise and remain aggregate edge distinct. Sobel operator, Laplacian operator, and DIS operator are applied respectively to detect the aggregate edge on Gaussian filter processed images. Based on the experiment, DIS operator outperforms other two …

Aggregate Shape Effect On Multicomponent Ionic Electromigration In Concrete, Qing-Feng Liu, Long-Yuan Li, Jian Yang

International Conference on Durability of Concrete Structures

This paper presents a numerical study on the mechanism of chloride migration in concrete. Unlike most of existing work, this study utilises multicomponent ionic transport models to reflect the influence of ionic interactions by coupling both mass conservation and Poisson’s equations. A series of 2-D, 3-phase models with different shapes and volume fractions of aggregates are developed to simulate the chloride migration test. Through a comparatively overall numerical exploration that considers external voltage, ionic interactions, heterogeneous nature, ITZ, and ionic binding, some important features about multispecies coupling and aggregate shape effect, which have not been properly reported from existing concrete …

Seismic Design Of A Prestressed Concrete Bridge, Alperen Ozel

LSU New Orleans Theses and Dissertations

Latest advancements in software have become an indispensable tool in structural analysis. The main goal of this thesis is to examine dynamic responses of bridges in seismic activity with the help of such tool as CSi Bridge. Therefore, throughout this study, a prestressed concrete bridge model will be thoroughly designed. In the first section, the required materials and structural components will be introduced. The following section will cover calculations required for modeling. The actual modeling of the structure will be carried out in Section 3. In Section 4, the set of required analysis for seismic design such as modal, pushover …

Quantification And Characterization Of Fracture Resistance In Asphalt Concrete Based On R-Curve Method, Shu Yang

Graduate Theses and Dissertations

The application of fracture energy is widely applied in the evaluation of cracking in the laboratory for asphalt concrete. However, this single number does not provide information on the characterization of the initiation and propagation of cracks. The Resistance Curve method, or R-Curve, is widely applied in characterizing various materials including, but not limited to, metal, polymer, rock, and composite. This research R-Curve method introduces asphalt concrete through a stepwise approach. First, in chapter one, there is a literature review of the history of fracture mechanics, fracture research in asphalt concrete, and an examination of the role of R-Curve application …

Impact Of Extreme Summer Temperatures On Bridge Structures, Ryan Hagedorn

Graduate Theses and Dissertations

Climate change and its effect on weather in the United States is a well-documented phenomenon. In particular, extreme heat waves have become more intense, more frequent, and longer lasting, especially in the southern United States. As with much of America’s transportation infrastructure, prestressed concrete bridge girders experience the effects of these heat waves. Uneven heating of optimized bridge girder sections results in large non-linear temperature gradients. In this study, temperature was monitored in three different AASHTO I-girders to determine the vertical and transverse temperature gradients in a pre-deck placement condition. It was determined that the current design standard, which uses …

Potential Application Of Ultra-High Performance Fiber-Reinforced Concrete With Wet-Mix Shotcrete System In Tunneling, Jean Gamarra

Civil Engineering Theses - Archive

In the tunneling industry, shotcrete has been used for several decades. The use of shotcrete or wet-mix spray-on methods allows the application of this method in complex underground profiles and shapes. The need for time efficient spraying methods and constructability for lining coverage opens the door for technologies like steel and synthetic fiber reinforced shotcrete to achieve a uniform and a good quality product. An important advantage of the application of fiber reinforced concrete in shotcrete systems for tunneling is that almost no steel fixing is required. This leads to several other advantages including safer working conditions during excavation, less …

Normal-Strength And High-Strength Concrete Columns Under Cyclic Axial Load And Biaxial Moment, Mehdi Zarei

Dissertations

The technique of using Carbon Fiber Reinforced Polymer (CFRP) materials to repair and strengthen various concrete members has become popular in the structural retrofitting field as an effective way to enhance the strength and ductility of concrete members due to its superior mechanical properties. In this study a method was introduced to study the behavior of concrete columns with and without CFRP jackets under constant axial load and variable lateral load. The lateral load was applied monotonically and cyclically. To predict the behavior of concrete columns under monotonic and cyclic compressive loadings, a computer code was developed to produce the …

Evaluating A New Cem Iii/A Cement For Concretes Exposed To Harsh Acid Rich Environments, David Thompson, Niall Holmes, John Reddy

Conference papers

The Irish Annex to the European specification, performance, production and conformity of concrete, IS EN 206, recommends CEM III/B cement for acid rich environments containing between 66 to 80% GGBS. However, BS 8500, the UK annex to EN 206 and the British Research Establishment (BRE) Special Digest 1, recommends CEM III/A cement with a GGBS range of 36-65%. This project investigated the performance of a new CEM III/A cement produced by Ecocem Ireland in concretes exposed to such environments using an extensive suite of laboratory tests.

In Ireland, up to €5.8bn will be invested to provide fresh drinking water and …

Effect Of Fly Ash Fortification In The Manufacture Process Of Making Concrete Towards Characteristics Of Concrete In Sulfuric Acid Solution, Asep Handaya Saputra, Muhammad Shohibi, Masatoshi Kubouchi

Makara Journal of Technology

Fly ash is a silica or alumino silica material that can be used as a constituent of cement in the concrete manufacturing process. Utilization of fly ash aims to improve durability and minimize the reduction of concrete’s compressive strength exposed to an acidic environment, which can be achieved through the pozzolanic reaction of fly ash with Ca(OH)2 within concrete. The reduced content of Ca(OH)2 through pozzolanic reaction will minimize the tendency of ettringite formation (compounds that cause deterioration and decrease the compressive strength of concrete). In order to determine the relation between fly ash replenishment into concrete with concrete’s characteristics …

Investigation Into Mechanisms And Mitigation Of Alkali-Silica Reaction In Sustainable Portland Cement Concrete Containing Recycled Glass Materials, Kaveh Afshinnia

All Dissertations

A significant portion of recycled glass from municipal waste streams is not found to be suitable for reuse as cullet in the production of new glass containers, and as a result it is disposed in landfills. One of the appropriate ways to reduce the disposal of waste glass in landfills is by using it in portland cement concrete as an aggregate material and/or supplementary cementitious material to replace portion of portland cement. The high silica content of the soda glass (approximately 70%) can potentially behave as a pozzolanic material when finely ground, which may enhance the mechanical and durability properties …

Alkali-~Activated Fly Ash Binders: Feasibility As A Sustainable Alternative To Ordinary Portland Cement For Pre-~Cast Systems, Kimberly Sierra

UNLV Theses, Dissertations, Professional Papers, and Capstones

Fresh, load-dependent, transport, and durability properties of alkali-activated fly ash mortars were studied. The influences of activator concentration, solution-to-binder ratio, curing condition, activator type, and sodium silicate-to-total solution ratio on the properties of the studied alkali-activated mortars were examined. This study was divided in two phases. The first phase dealt with the use of sodium hydroxide as the sole activator. The second phase of the study was divided into two parts, both of which used a combination of sodium hydroxide and sodium silicate as the activator solution. Part I of phase II used elevated temperature curing conditions, whereas part II …

Reducing The Porosity And Sealing Cracks By Using Crystalline Admixture In Conventional Concrete, Visar Krelani, Liberato Ferrara

UBT International Conference

There is a continuous increase of quality on civil engineering materials in developed countries and parallel increase of need for new constructions in developing countries. Professional community should propose solutions for the durability that can resist in different severe environments. The most important factor that can affect concrete durability is represented by the pore distribution. Transport properties can take place through the porous network inside the cementitious composites and the aggregates interface, permitting the ingress of aggressive agents damaging concrete function intrinsically as a material and the well-functioning of the entire structure. The use of a crystalline admixture during the …

Feasibility Of Cathodic Protection In Grouted Post Tensioned Tendons - Exploratory Model Calculations, Jacob Dharma Bumgardner

USF Tampa Graduate Theses and Dissertations

Recent corrosion related failures of grouted post tensioned tendons, even after the introduction of improved grouts, have led to renewed interest in supplemental or backup means of corrosion control for these systems. A finite element model is presented to explore feasibility of impressed current cathodic protection of strand in grouted tendons. The model examines polarization evolution as function of service time and includes consideration of anode placement and size, grout porosity, pore water alkalinity, electrochemical species diffusivity and applied voltage on the polarization efficacy and durability of such a system. The exploratory model projections suggested that, within the context of …

Shear Strengthening Of Reinforced Concrete Beams Using Textile-Reinforced Mortar, Oluwafunmilayo Morenike Awani

Theses

The effectiveness of using carbon textile-reinforced mortar as an innovative technique to improve the shear response of reinforced concrete beams has been investigated. The research comprised double-shear bond testing on bond behavior of textile-reinforced mortar, large-scale beam testing on shear response of reinforced concrete beams strengthened with textile-reinforced mortar, and nonlinear finite element modeling of the tested beam specimens. Test variables of the double-shear bond testing were the matrix type, and width/length of the bonded area, whereas for the large-scale beam testing, the variables included the number of textile-reinforced mortar layers, matrix type, and amount of internal stirrups. Results of …

Post-Tensioned Concrete Shear Wall, Purdue Ect Team

ECT Fact Sheets Archive

The post-tension concrete shear wall by Tipping Mar will replace the conventional concrete shear wall in earthquake prone areas in many instances, depending on the height and scale of the building.