Civil Engineering Commons^™

An Agent-Based Model To Study Competitive Construction Bidding And The Winner's Curse, Amr Elsayegh, Cihan H. Dagli, Islam H. El-Adaway

Engineering Management and Systems Engineering Faculty Research & Creative Works

Reverse auction theory is the basis for competitive construction bidding process. The lowest bid method is utilized for selecting contractors in public projects. The winning contractor having the lowest bid value could be cursed when the submitted bid value results in negative profits. This is caused by many factors such as the contractor's estimation accuracy and markup. This is addressed in this paper by providing a model simulating the construction competitive bidding and the occurrence of the winner's curse. To this end, the authors show the extent to which the winner's curse affects the status of contracting companies. The objectives …

Correction To: Recommendations Of Rilem Tc 260-Rsc For Using Superabsorbent Polymers (Sap) For Improving Freeze–Thaw Resistance Of Cement-Based Materials (Materials And Structures, (2019), 52, 4, (75), 10.1617/S11527-019-1375-4), Viktor Mechtcherine, Christof Schröfl, Michaela Reichardt, Agnieszka J. Klemm, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Agnieszka J. Klemm is affiliated to Glasgow Caledonian University, Glasgow, UK.

Understanding Transport Of An Elastic, Spherical Particle Through A Confining Channel, Shuaijun Li, Honghui Yu, Tai-De Li, Zi Chen, Wen Deng, Alimohammad Anbari, Jing Fan

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The transport of soft particles through narrow channels or pores is ubiquitous in biological systems and industrial processes. On many occasions, the particles deform and temporarily block the channel, inducing a built-up pressure. This pressure buildup often has a profound effect on the behavior of the respective system; yet, it is difficult to be characterized. In this work, we establish a quantitative correlation between the built-up pressure and the material and geometry properties through experiments and mechanics analysis. We fabricate microgels with a controlled diameter and elastic modulus by microfluidics. We then force them to individually pass through a constrictive …

Bond Behavior Of Advanced Fiber Reinforced Composite-Concrete Joints, Xingxing Zou

Doctoral Dissertations

“Externally bonding advanced composite materials to concrete structures is an effective way to improve their strength, ductility, and durability. The interfacial bond behavior is fundamental to understand the overall structural performance of concrete structures strengthened with advanced composite materials. This study includes a comprehensive investigation of the bond behavior of composite-concrete joints with different fiber reinforced composite types. First, a direct approach to determine the bond-slip relationship for fiber reinforced cementitious matrix (FRCM)-concrete joints based on fiber strain measurements was proposed. Then, an analytical solution to predict the full-range response of FRCM-concrete joints was derived by assuming a trilinear bond-slip …

Feasibility Study On Novel Fire-Resistant Coating Materials, Anyou Zhu

Masters Theses

“Over the past decades, wildfires in the United States have caused severe damage and property losses. The California Camp Fire in November 2018 caused 85 civilian fatalities and destroyed 18,793 structures. There is a need to enhance the fire resistance of structures and buildings. The primary purpose of this study was to develop innovative surface-bonded fire-resistant material that can be used as a wall coating with three primary features: (a) workability for application, (b) enough adhesion to the surface of the structure, (c) fire-resistant. This research developed mix designs of innovative fire-resistant coating materials including high-performance cement mortar (HPCM), geopolymer …

Seismic Behavior Of Composite Bridge Columns, Mohanad M. Abdulazeez

Doctoral Dissertations

“This study investigates experimentally and numerically the seismic behavior of large-scale hollow-core fiber-reinforced polymer-concrete-steel (HC-FCS) innovative bridge columns as a sustainable approach to endure and rapidly recover from natural disasters such as earthquakes. The HC-FCS column consisted of a concrete shell sandwiched between an outer fiber-reinforced polymer (GFRP) tube and an inner steel tube to provided continuous confinement for the concrete shell along with the height of the column. The columns have a slender inner steel tube with diameter-to-thickness (D_s/t_s) ratios ranged between 85 to 254. Each steel tube was embedded into the footing, while the …

A New Type Of Crumb Rubber Asphalt Mixture: A Dry Process Design And Performance Evaluation, Feng Ma, Jiasheng Dai, Zhen Fu, Jenny Liu, Wenhao Dong, Zhen Huang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

To obtain a crumb rubber asphalt mixture with excellent performance, this study combined trans-polyoctenamer rubber (TOR), crumb rubber, and other additives to establish a new type of crumb rubber (CRT). The objective of this study was to design and evaluate the road performance of the new type of crumb rubber asphalt mixture (CRTAM) with a skeleton dense texture through a dry process. First, the skeleton intrusion compact volume method was used to optimize the grading of coarse and fine aggregates, and the design of the CRTAM gradation was carried out through the same and unequal volume replacement grading method. Then, …

Optical Fiber Based Integrity Test Of Civil Engineering Materials: Numerical Analysis, Ruoyu Zhong

Masters Theses

“Major advancement in Civil Engineering cannot be accomplished without the help of sensors. Among different types of sensors, fiber-optic sensor is known for its light weight, high accuracy, resolution, immunity to electromagnetic interference, and resistance to harsh environment. This research mainly focuses on fiber-optic sensor application on concrete structures as temperature sensor. Thermal Integrity Profiling (TIP) is a non-destructive integrity testing method which makes use of the hydration heat from the concrete curing process to detect defects within a drilled shaft. Any defect of concrete could result in a temperature anomaly in a drilled shaft. The accuracy of the current …

Studying The Effects Of Various Process Parameters On Early Age Hydration Of Single- And Multi-Phase Cementitious Systems, Rachel Cook

Doctoral Dissertations

”The hydration of multi-phase ordinary Portland cement (OPC) and its pure phase derivatives, such as tricalcium silicate (C₃S) and belite (ß-C₂S), are studied in the context varying process parameters -- for instance, variable water content, water activity, superplasticizer structure and dose, and mineral additive type and particle size. These parameters are studied by means of physical experiments and numerical/computational techniques, such as: thermodynamic estimations; numerical kinetic-based modelling; and artificial intelligence techniques like machine learning (ML) models. In the past decade, numerical kinetic modeling has greatly improved in terms of fitting experimental, isothermal calorimetry to kinetic-based modelling …

Minimizing The Negative Effect Of Pumping On Scc Freeze-Thaw Durability, Daniel Galvez-Moreno

Doctoral Dissertations

“The durability of concrete must be ensured to reduce the carbon footprint of the production of portland cement. If concrete is properly designed to preserve its integrity under adverse exposure conditions, the service life of the material can be extended with minimum maintenance. Nevertheless, bad handling, placing, finishing or curing practices can abate the durability potential and service life of even the best mix design. Pumping concrete is a very efficient placing technique that offers significant cost reduction and versatility at the jobsite, but it also has the potential of altering the air void system parameters, which are key to …

Complexities Observed During The Development Of A Rheological Testing Procedure For Small Cement Paste Samples, Aida Margarita Ley-Hernandez

Doctoral Dissertations

“Rheology has been widely used to describe the flow properties of fresh cement-based suspensions. The use of a rheometer to characterize these properties is not a straightforward task due to the dependency to different preparation conditions, mixing processes, testing procedures and measuring instruments employed. In addition, shear and time dependency of the material which undergoes chemical and physical particle bonding, caused by hydration of cement and flocculation. Nevertheless, the characterization and understanding of the rheological behavior of cement-based materials have become essential with the recent introduction of novel applications like digital construction in the field of civil engineering, among others. …

Contractual Guidelines For Contractors Working Under Projects Funded By Southeastern Us Dots, Islam H. El-Adaway, Amr Elsayegh, I. S. Abotaleb, C. Smith, M. Bootwala, S. Eteifa

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Transportation projects in the infrastructure sector contribute to approximately 42% of the total expenditures on public construction projects in the US. The main source of funding of these projects is the taxpayer's hard-earned money. The ever-growing problem by transportation projects is that the available funds are less than those required to have a stable and well maintained transportation network. Unnecessary costs in these projects are mainly caused by Conflicts, Claims and Disputes (C2D). According to recent reports, C2D in construction is greatly attributed to poor contract administration. The goal of this paper is to provide better understanding and utilization of …

Affordable Learning Solutions And Interactive Content In Engineering Mechanics, Nicolas Ali Libre

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Digital Affordable Learning Solutions (ALS) provides students with quality yet affordable educational content and enables instructors to utilize multimedia and interactive technology as effective ways of delivering course material. The reduced course content expenses not only allow more students to access the educational material, but also permit the instructors to customize and adapt the material to their teaching style. Incorporation of interactive technology through visually appealing media such as animations, graphics, simulations, videos, and three-dimensional models promotes students' interest in learning theoretical and abstract subjects in science and engineering. In this study, the incorporation of an interactive eBook as an …

Hydration Of Binary Portland Cement Blends Containing Silica Fume: A Decoupling Method To Estimate Degrees Of Hydration And Pozzolanic Reaction, Wenyu Liao, Xiao Sun, Aditya Kumar, Hongfang Sun, Hongyan Ma

Materials Science and Engineering Faculty Research & Creative Works

Determination of degrees of hydration/reaction of components of blended cementitious systems (i. e., cement and SCMs: supplementary cementitious materials) is essential to estimate the systems' properties. Although the best methods for determining degrees of reaction of different SCMs have been recommended by RILEM TC238, they rely on either expensive equipment (e.g., nuclear magnetic resonance) or time-consuming sample preparation and data processing (e.g., backscattered electron image analysis). Furthermore, these methods cannot simultaneously characterize degree of hydration of cement and degree of reaction of SCMs. A novel decoupling method, which can simultaneously estimate the degree of hydration of cement and the degree …

Seismicity Enhances Macrodispersion In Finite Porous And Fractured Domains: A Pore-Scale Perspective, Lizhi Zheng, Lichun Wang, Wen Deng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Understanding the effects of oscillating flow field induced by seismicity on the transport process is vital for predicting the fate and transport of solute in many dynamic environments. However, there is prominent discrepancy in arguing with the response of dispersion to the oscillating flow field (i.e., the longitudinal dispersion coefficient would decrease, increase, or maintain unchanged). To unravel the underpinning physics about this controversial response, we simulated two-hundred twenty pore-scale numerical experiments for the seismicity-induced oscillating flow field and associated solute transport in the idealized finite porous (i.e., fluidic plate) and fractured (i.e., parallel plates) domains. The numerically obtained breakthrough …

Unmanned Aerial And Traversing Vehicle -- A Mobile Platform For Bridge Inspections, Clayton A. Fritsche

Masters Theses

“Unmanned aerial vehicles (UAVs), also known as drones, have been rapidly growing in popularity since their creation. This study aimed to create a robotic platform used to assist in the inspection process of the nation’s aging and deteriorating bridges. To this end, a multimodal inspection robot that utilized both flying and driving technologies, was designed, analyzed, and tested for aerial, traversing, and their transitional operability. The design, herein referred to as the “BridgeBot”, was evaluated both computationally and experimentally. A finite element model of the BridgeBot was established and analyzed under static loading scenarios to help determine stress distributions and …

Performance Of One-Part And Two-Part Class C Fly Ash-Based Alkali Activated Mortars, Cedric Chani Kashosi

Masters Theses

“Seeking an eco-friendly concrete, researchers have conducted studies to fully replace ordinary Portland cement (OPC) with fly ash (FA) producing alkali-activated concrete (AAC). Results showed better performance of AAC in terms of high early compressive strength, and durability compared to conventional concrete. However, much is still unknown about the behavior of AAC. From the type of materials used, the curing procedure, and long-term strength development of these binders; a thorough investigation is needed in order to fill the existing gap from previous studies and thus make a step forward to the safely use of AAC in the construction industry. The …

A Study On End-Anchorage And Bond Behavior Of Steel-Fiber Reinforced Cementitious Matrix Composites Externally Bonded To A Concrete Substrate, Christopher Michael Moore

Masters Theses

"Fiber reinforced cementitious matrix (FRCM) composites are a strengthening material consisting of continuous fibers embedded in an inorganic matrix that have the potential to provide additional flexural and shear strength to concrete and masonry members. When used for external strengthening, however, debonding of the material is often observed due to slippage of the fiber with respect to the matrix, causing loss of composite action and a reduction in load carrying capacity. The composite utilized in this study consisted of continuous steel fibers embedded in an inorganic cementitious matrix bonded to a concrete prism. Additionally, an end-anchorage system was implemented with …

Development Of Test Methods For Characterizing Extrudability Of Cement-Based Materials For Use In 3d Printing, Jonathan Thomas Kuchem

Masters Theses

"3D printing is the process of creating three-dimensional objects using an automated additive manufacturing process. The 3D printing process has been used with materials such as metals and polymers, but application with cement based materials for the construction industry has yet to be developed. In this research, two main problems were investigated for printing cement based composite materials: extrudability and tensile reinforcement. Fiber-reinforced concrete (FRC) was studied as an internal reinforcing system to increase tensile/flexural strength. First, FRC was studied to investigate mechanical properties and use of fibers from waste tires as an environmentally friendly option. A reference mixture with …

Changes In Fresh Properties Of Flowable Concrete Induced By Pumping And Composition Of The Lubrication Layer, Alexis Salinas

Masters Theses

"Pumping is an easy method to move concrete while keeping stability. It is worldwide accepted as one of the principal methods for concrete placement, as it accelerates construction. Typically, concrete acceptance in terms of fresh quantitative empirical properties (i.e. slump/slump flow and air content) are performed prior to the pumping process. However, empirical measurements have the drawback that they only measure 1 point. Rheology is better tool to evaluate the behavior of concrete. Pumping is a process that induces considerable shearing in the concrete that can impact its rheological properties. Therefore, the magnitude of these changes in fresh properties depends …

Smart Building And Construction Materials, Donglu Shi, Julian Wang, Wen Deng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Advances and innovations in materials science and engineering have always played a substantial role in civil engineering, building structural design, and construction. In recent years, extensive effort has been devoted to the applications of stimuli-responsive smart materials and nanostructures in buildings. These smart materials used in the built environment can be defined as those offering specific functional and adaptable properties in response to thermal, optical, structural, and environmental stimuli. Not only do these materials enhance the overall performance of new building construction but also promise safer structures, longer durability of building elements, efficient building energy savings, greater environmental sustainability, and …

Detection And Elimination Of Rock Face Vegetation From Terrestrial Lidar Data Using The Virtual Articulating Conical Probe Algorithm, Kenneth John Boyko

Doctoral Dissertations

"A common use of terrestrial lidar is to conduct studies involving change detection of natural or engineered surfaces. Change detection involves many technical steps beyond the initial data acquisition: data structuring, registration, and elimination of data artifacts such as parallax errors, near-field obstructions, and vegetation. Of these, vegetation detection and elimination with terrestrial lidar scanning (TLS) presents a completely different set of issues when compared to vegetation elimination from aerial lidar scanning (ALS). With ALS, the ground footprint of the lidar laser beam is very large, and the data acquisition hardware supports multi-return waveforms. Also, the underlying surface topography is …

Smart Building And Construction Materials, Donglu Shi, Julian Wang, Wen Deng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Abrasion Resistant Concrete Mix Design For Cold Climates, Diane Mariah Murph

Masters Theses

“Studded tire usage in Alaska contributes to rutting damage on pavements resulting in high maintenance costs and safety issues. In this study, binary, ternary, and quaternary highly-abrasion resistant concrete mix designs using supplementary cementitious materials (SCMs) were developed. The properties of fresh concrete and mechanical, and durability properties of hardened concrete for these mix designs were then tested to determine an optimum highly-abrasion resistant concrete mixture which could be placed in cold climates to reduce rutting damage. SCMs used included silica fume, ground granulated blast furnace slag, and type F fly ash. Tests including workability, air content, drying shrinkage, compressive …

Feasibility Study For Sustainable Controlled Low-Strength Material (Clsm) Incorporating Off-Specification Fly Ash And Bottom Ash, Alexis K. Vandomelen

Masters Theses

“Controlled low-strength material (CLSM) is a self-consolidating cementitious material used in applications requiring high flowability and low strength. The primary components of this material, being cement and sand, however, negatively impact the environment. Cement is a large contributor to CO2 emissions, and the vast depletion of sand causes physical and political issues. Furthermore, over 100 million short tons of coal combustion products (CCP), including fly ash and bottom ash, are created annually in the United States, while nearly half of all CCP remain unused. No off-specification fly ash has been implemented in CLSM. This study uses coal ashes sourced from …

Chemically-Bonded Enamel-Coated Steel Pipelines For Corrosion Protection And Flow Efficiency, Liang Fan

Doctoral Dissertations

"This study is to explore and develop chemically-bonded enamel coating (200-300 um) on steel pipes, when subjected to soil and thermal environments, in order to improve the corrosion protection and safety of hazardous liquid and natural gas pipelines while reducing pressure loss. Out of five types of enamels and their various mixtures, Tomatec slurry and GP2118 powder were selected for steel pipeline applications. They were applied at approximately 810 °C to the inside surface of steel pipes in wet and electrostatic processes, respectively. The thickness and surface roughness of the enamel coating were measured using a gauge and an optical …

Development Of Lidar Assisted Terrestrial Radar Interferometry For Rock Deformation Monitoring, Ricardo Javier Romero Ramirez

Doctoral Dissertations

"Rock and soil slope movements cost millions of dollars annually. During the past few decades, engineers have relied on traditional methods to detect slope movements. These tools are valuable for small spatial areas but, may not be adequate or cost effective for large spatial areas. Remote sensing methods such as terrestrial laser scanning (TLS) and terrestrial radar interferometry (TRI) provide excellent spatial coverage, and with adequate post-data-processing software, sub-millimetric scale deformation sensitivity can be achieved.

This work will present a comparative experimental study between TLS and TRI. The comparative experimental study will allow us to achieve the two main objectives …

Dynamic Impact Induced By Tornadoes Through Simulations Based On Two-Way Wind-Structure Interactions, Tiantian Li

Doctoral Dissertations

"Tornadoes have become a significant cause of property damage, injuries and life losses. Investigations of tornadoes indicate that most fatalities were caused by building failure. For example, in the Joplin, MO tornado of 22 May 2011, 161 people were killed, and 84% fatalities were related to building failure. Therefore, it is imperative to develop science-based tornado-resistant building codes, in order to provide a better level of occupant protection from tornadoes and to minimize the tornado-induced damage. This requires in-depth understanding of the wind characteristics of tornadoes and their wind effects on civil structures, based on which design tornadic wind loading …

The Mechanics Of Precision Presplitting, Anthony Joseph Konya

Doctoral Dissertations

"Precision Presplitting is a widely used method of presplit blasting for the mining and construction industries. In recent years considerable effort has gone into the development of empirical equations based on field data to be able to better design the Precision Presplit for various rock types and structural environments. However, the most widely discussed theory about the mechanics of the presplit formation, that of shockwave collisions, does not appear to be applicable for this method of presplitting.

This research has disproven this theory based on insufficient magnitude of the shockwave from modeling with basic wave mechanics. Other authors have suggested …

Feasibility And Assessment Of Using Recycled Rubber For Infrastructure Applications, Ahmed A. Gheni

Doctoral Dissertations

“The United States needs to mine billions of tons of raw natural aggregate each year. At the same time, millions of scrap tires are stockpiled every year. Therefore, replacing natural aggregate with recycled crumb rubber aggregate will be beneficial to the construction industry and environment. This research aimed to investigate the feasibility of using recycled rubber in new construction applications. Based on size, recycled rubber was selected to match its natural counterpart. Different ratios of recycled crumb rubber were used as a fine aggregate replacement in concrete masonry units (CMUs) where the rubberized units showed a lower unit weight, higher …