Civil Engineering Commons^™

Effect Of In-Situ Formed Nano-Calcite Particles On Hydration And Properties Of Cement-Based Materials, Bowen Tan

Masters Theses

The in-situ preparation of nano-calcite via bubbling method and the effects of the nano-calcite on the hydration process and properties of the cement-based materials are investigated in this research. The nano-calcite is synthesized under different conditions and added into Portland cement to prepare test samples. The bubbling method is then introduced in upcycling the municipal solid waste incineration (MSWI) ashes, and the effects of the upcycled MSWI ashes on the hydration of Portland cement is investigated. Experimental results illustrate that the COâ‚‚ bubbling method can produce nanometer-to-sub- micron-sized calcite particles, and the synthesis rate and the morphology of the nano-calcite …

Investigating The Interaction Between The Recycled Components And The Asphalt Binders, Plant, Lab, And Field Mixes, Eslam Deef-Allah

Doctoral Dissertations

"Modifying asphalt binders and mixes with recycled components is common practice due to their environmental and economic merits. Literature has indicated that different recycled components interact with (blend with) asphalt differently, ranging from no blending, partial blending, or full blending. The degree of blending between recycled components and virgin asphalt binders (VABs) and the exchanged components impact the performance of modified asphalt binders. However, the nature of the interaction process between the recycled components and the VABs is not fully understood. The primary objective of this study was to explore the interactions between recycled components and VABs. By understanding the …

Characterization And Utilization Of Alkali-Activated Concrete For Sustainable Infrastructures, Eslam Gomaa

Doctoral Dissertations

“This study has investigated the feasibility of using locally available fly ashes (FAs) to synthesize alkali-activated concrete (AAC) for different structural and repair applications. Using AAC made of 100% FA reduces global CO2 emissions, saves energy, and decreases raw material consumption during the production process of ordinary Portland cement. Class C FAs, sourced from Labadie, Jeffery City, Kansas City, Thomas Hill, and Sikeston power plants in the state of Missouri, were used to synthesize the AAC. Sodium silicate (SS), Na2SiO3, and sodium hydroxide (SH), NaOH were used as the alkali activators. Slag, crumb rubber, and air-entraining admixture were used as …

A Three-Dimensional Fully Coupled Hydro-Mechanical Elasto-Plastic Model For Unsaturated Soils With Consideration Of Hysteresis Behavior, Beshoy Sami Moussa Riad

Doctoral Dissertations

"Unsaturated soils are often used as a construction material in transportation infrastructures; in which it is subjected to cyclic traffic loadings and/or seasonal wetting-drying cycles. While mechanical hysteresis is a common feature of soils in general, hydraulic hysteresis is associated with unsaturated soils. Most existing constitutive models paid limited attention to the mechanical and hydraulic hysteresis behavior of unsaturated soils. This research presents a three-dimensional model for unsaturated soils and a chemo mechanical model for saturated soils. The unsaturated soils’ model has the following characteristic features: (a) the hydraulic and mechanical behaviors are fully coupled under 3D conditions; (b) it …

Design And Performance Of Self-Consolidating And Thixotropic Ultra-High-Performance Concrete For Infrastructure Construction And Rehabilitation, Le Teng

Doctoral Dissertations

"The objective of this research is to develop two classes of ultra-high-performance concrete (UHPC), one with self-consolidating consistency and the other with improved thixotropy. Tailoring the rheological properties of low yield stress UHPC can improve dispersion and orientation of steel fibers used in the design of UHPC, hence enhancing the tensile and flexural properties. Similarly, improving the thixotropy of UHPC can enable unique performance for the design of thin bonded bridge deck overlay. The research investigated various thixotropy enhancing admixtures to enhance the structural build-up at rest of UHPC. A total of 16 bonded overlay slab specimens were used to …

Corrosion Resistance Performance Investigation Of Mild Steel Bar Coated With Magnesium Phosphate Cement Paste, Fan Zhang

Doctoral Dissertations

"In this research study, the anti-corrosion mechanism of reinforcement embedded in magnesium potassium phosphate cement (MKPC) is explored. In addition, one type of additives, metakaolin, and one type of retarder, boric acid, are employed in MKPC to modify its properties in order to further investigate corrosion resistance and to achieve mass-production coating reinforcement at the work site. This coating method may be practical for some underwater construction and some traditional reinforcement concrete structures to reduce the reinforcement corrosion rate and to eventually extend service life in both repair and new construction applications.

By comparing the electrochemical properties of bare ribbed …

Use Of Cellular Concrete For Air Convection Embankment To Protect Permafrost Foundation In Cold Regions, Hanli Wu

Doctoral Dissertations

"Crushed-rock air convection embankment (ACE) has been used to mitigate thaw settlement, and pavement distresses caused by climatic extremes in permafrost regions for over three decades. However, the desired crushed rocks needed for ACE are not readily available in many areas of interior Alaska. Burdened by the need to ship suitable rocks to remote locations, the cost of constructing an ACE is often prohibitively high, which prevents its wide use in Alaska. An existing cementitious material, cellular concrete, may provide the solution.

This study intends to systematically characterize the heat transfer patterns of ACE and identify the performance benefits of …

Theoretical Determination Of The Yield Curve For Unsaturated Soils, Sara Fayek

Doctoral Dissertations

"An important step to developing a good understanding of the behavior of unsaturated soils is to adopt a formal and simple constitutive framework and to conduct high-quality and short-time experiments. Barcelona Basic Model (BBM) was the first elastoplastic constitutive model for unsaturated soils. The yield curve, which separates the elastic region from the elastoplastic region, is an important aspect of constitutive modeling for unsaturated soils. Most concepts for unsaturated soils were developed based upon the results from suction-controlled triaxial (SCTX) tests. Though, the SCTX tests on unsaturated soils are costly, time-consuming, and laborious, and their results are questionable. This study …

Strain And Temperature Measurement From Distributed Fiber Optic Sensors In Performance-Based Fire Engineering, Yanping Zhu

Doctoral Dissertations

"Strain and temperature measurement of steel and concrete structures under fires is critical to the understanding of structural performance yet historically challenging due to a significant gap in measurement science. This Ph.D. study characterizes in six parts low-cost distributed fiber optic sensors and applies them to strain, and temperature measurements based on Rayleigh and Brillouin light scattering. The first part aims to quantify the Rayleigh scattering based measurement accuracy of distributed fiber optic sensors under a heating-holding load protocol and characterize the effect of polymer coating on the sensors as the polymer softens and melts at elevated temperatures. The second …

Deep Learning-Based Surrogate Models For Post-Earthquake Damage Assessment, Xinzhe Yuan

Doctoral Dissertations

"Seismic damage assessment is a critical step to enhance community resilience in the wake of an earthquake. This study aims to develop deep learning-based surrogate models for widely used fragility curves to achieve more accurate and rapid assessment in practice. These surrogate models are based on artificial neural networks trained from the labelled ground motions whose resulting damage classes on targeted structures are determined by nonlinear time history analyses. The development of various surrogate models is progressed in four phases. In Phase I, the multilayer perceptron (MLP) is used to develop multivariate seismic classifiers with up to 50 hand-crafted intensity …

Editorial: Molecular Simulation On Cementitious Materials: From Computational Chemistry Method To Application, Hongyan Ma, Dongshuai Hou, Jinrui Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Energy Dissipation Using Negative Stiffness Shells, Mohamed Elgawady, Yasser Darwish

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A negative stiffness shell has a convex first position, but can transition or snap to a concave second position under a force applied to the exterior surface of the shell in the convex first position. During the transition, the shell exhibits negative stiffness that permits a large amount of energy to be absorbed. The negative stiffness shell can withstand a high initial force threshold prior to transitioning. In the second, concave position the shell can still resist force. Moreover, it is possible for the shell to revert back to the first, convex position with minimal plastic deformation for subsequent use. …

Fiber Optic-Based Thermal Integrity Profiling Of Drilled Shaft: Inverse Modeling For Spiral Fiber Deployment Strategy, Wen Deng, Ruoyu Zhong, Haiying Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The current state of practice to interpret the thermal integrity profiling (TIP) data of drilled shaft is the so-called effective radius method. It uses the concrete pouring log and average temperature to construct a relationship between temperature distribution and effective radius that can be used to reconstruct a drilled shaft model. While this effective radius method is computationally inexpensive and has good operationality, it is not good at predicting the dimensions and shape of shaft defects. Upgrading the sensor used in conventional TIP from thermocouples/thermal wires to fiber optic sensors, the spatial resolution of the measured temperature will be enhanced. …

Collaborative Planning In The Construction Industry: A Holistic Framework For Assessing Collaborative Planning Practices And Predicting Project Performance, Amr Elsayegh

Doctoral Dissertations

"The fragmentation of the construction industry prompted developing novel methods such as collaborative planning, lean construction, advancements in technology, integrated project delivery, and relational contracting. Current research focused on specific facets of collaborative planning without presenting a comprehensive analysis of its factors. As such, the goal of this research is to develop a holistic framework that studies and evaluates collaborative planning practices in construction projects. This research offers significant addition to the body of knowledge through various theoretical and practical contributions. In relation to that, this research developed a comprehensive framework by (1) identifying a comprehensive list of factors influencing …

Early Wildfire Detection By Air Quality Sensors On Unmanned Aerial Vehicles: Optimization And Feasibility, Doaa Rjoub

Masters Theses

“Millions of acres of forests are destroyed by wildfires every year, causing ecological, environmental, and economical losses. The recent wildfires in Australia and the Western U.S. smothered multiple states with more than fifty million acres charred by the blazes. The warmer and drier climate makes scientists expect increases in the severity and frequency of wildfires and the associated risks in the future. These inescapable crises highlight the urgent need for early detection and prevention of wildfires. This work proposed an energy management framework that integrated unmanned aerial vehicle (UAV) with air quality sensors for early wildfire detection and forest monitoring. …

Effect Of Spike Anchors On The Bond Behavior Of Steel Reinforced Polymer Composite Externally Bonded To A Concrete Substrate, Keenan Lorence Mcburney

Masters Theses

Steel reinforced polymer (SRP) composites are a strengthening material that consist of continuous high-strength steel cords embedded in a polymeric matrix. SRP has demonstrated a high potential for providing additional flexural and shear strength in existing concrete structures when bonded to the concrete surface. However, premature debonding from the concrete substrate at low load levels is a major shortcoming of SRP composites. It has been demonstrated in previous studies that anchors can limit the effect of debonding in fiber reinforced polymer (FRP) composites by increasing the load capacity and ductility of the composite-concrete interface.

This study aims to investigate the …

Numerical Behavior Of Steel H-Plies Repaired Using Layered Concrete Jacket, Fareh Waleed Abudawaba

Masters Theses

“This study developed finite element models (FEMs), using LS-Dyna software, to investigate the repair of corroded steel H-piles using concrete jacket. The concrete modeled as a layered material simulating 3D printed concrete. 3DPC is a new technology that can be used to repair or build structures without formwork by depositing concrete mixture layer by layer. For the 3DPC, this study investigated the feasibility of using alkali-activated concrete (AAC) synthesized using class C fly ash as the main binder. The fresh properties, extrudability, and buildability of the proposed concrete were investigated through open time and deformation tests, respectively. Hardened properties were …

Studies On Tornado-Structure Interactions And Guidance On Design Tornadic Wind Loading, Zhi Li

Doctoral Dissertations

“Tornadoes are violent natural hazards that could caused significant property loss and fatalities. Statistical data indicates that most fatalities during tornado incidents were caused by the building failure under tornadoes. For example, in the 2011 Joplin Tornado, 161 people were killed, and 84 percent of the fatalities were related to the failure of buildings. In addition, most of the significant, tornado-induced property loss and fatalities are relevant to the tornadoes passing through the densely populated regions. Besides buildings, bridges were also severely damaged or destroyed by tornadoes in the United States. To reduce the tornado-induced loss, it is imperative to …

Enhancing Mixed Traffic Flow Safety Via Connected And Autonomous Vehicle Trajectory Planning With A Reinforcement Learning Approach, Yanqiu Cheng, Chenxi Chen, Xianbiao Hu, Kuanmin Chen, Qing Tang, Yang Song

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The longitudinal trajectory planning of connected and autonomous vehicle (CAV) has been widely studied in the literature to reduce travel time or fuel consumptions. The safety impact of CAV trajectory planning to the mixed traffic flow with both CAV and human-driven vehicle (HDV), however, is not well understood yet. This study presents a reinforcement learning modeling approach, named Monte Carlo tree search-based autonomous vehicle safety algorithm, or MCTS-AVS, to optimize the safety of mixed traffic flow, on a one-lane roadway with signalized intersection control. Crash potential index (CPI) is defined to quantitively measure the safety performance of the mixed traffic …

Experimental And Numerical Studies Of Novel Thermal Energy Storage Materials For Applications In Concrete And Energy Storage Systems, Wenyu Liao

Doctoral Dissertations

In this work, several types of novel thermal energy storage (TES) materials and composites are explored, and a series of numerical simulation models and experimental protocols are developed to evaluate the potentials of these materials to be applied in concrete, pavement, and thermal energy storage systems.

The first two types of novel TES materials/composites are at the micro-scale, which use micro diatomite (DE) and cenosphere (Ceno) as carriers of phase change material (PCM), respectively. The third type of novel TES material is at the macro-scale, utilizing lightweight sand (LWS) and lightweight coarse aggregate as carriers to load PCM. The last …

Innovative Modeling And Management Of Infrastructure Systems, Engineering And Construction Operations, And Offsite Construction Technology Using Computational Data Analytics, Rayan Hassane Assaad

Doctoral Dissertations

“The construction industry has been facing considerable challenges due to the inadequacy of the traditional methods in executing, managing, and modeling infrastructure and construction projects. While many techniques have been developed to improve the decision-making process in the industry, there is no evidence of sufficient and continuous improvements in the industry’s adoption and implementation of innovative techniques such as new management approaches, modern modeling methods, and emerging computational data analytics. To this end, the goal of this research is to address some of the recent challenges faced in the industry with a focus on infrastructure asset management, construction engineering and …

Reveal Wind Loading Of Tornadoes And Hurricanes On Civil Structures Towards Hazard-Resistant Design, Ryan Honerkamp

Doctoral Dissertations

"Extreme winds impacting civil structures lead to death and destruction in all regions of the world. Specifically, tornadoes and hurricanes impact communities with severe devastation. On average, 1200 tornadoes occur in the United States every year. Tornadoes occur predominantly in the Central and Southeastern United States, accounting for an annual $1 billion in economic losses, 1500 injuries, and 90 deaths. The Joplin, MO Tornado in 2011 killed 161 people, injured more than 1000, destroyed more than 8000 structures, and caused $2.8 billion of property loss. Hurricanes occur predominantly on the United States East coast regions and along the coast of …

Use Of Portable Seismic Property Analyzer And Ground Penetrating Radar To Assess Bridge Decks, Samie Ramadan A Hamad

Doctoral Dissertations

The Montauk Bridge deck was assessed based on the portable seismic property analyzer and ground penetrating radar data. Based on the analysis of the portable seismic property analyzer data, it was determined that over 65% of bridge conditions were rated serious to poor condition with an average compressive strength of less than 2500 psi; less than 35% of bridge deck conditions were rated fair to good with an average compressive strength over 2500 psi. Based on ground penetrating radar data, it was determined that 72% of the bridge deck was in serious to poor condition, and only 28% of the …

Hydromechanical Stress And Internal Erosion Under Earthen Structures, Kerry Allen Magner

Doctoral Dissertations

"Dam failures by seepage and internal erosion have reportedly been attributed to up to 40% of all dam failures in the United States. Backwards piping erosion either through the embankment or foundation soils has been reported to be the major contributing method to seepage and internal erosion dam failures. This proposed research is motivated by the lack of understanding of the complex stress regimes associated with internal erosion in cohesionless soils under earthen structures. The overall goal of this research is to provide a fundamental understanding of internal erosion and the hydromechanical stress conditions necessary for the initiation and continuation …

Fiber Reinforced Polymer Bar Investigation: Long-Term In-Situ Durability And Bond Strength Assessment In Conventional And Sustainable Concrete, Ali Fadhil Al-Khafaji

Doctoral Dissertations

"Corrosion of steel reinforcement and carbon dioxide emissions are two major global problems. Different methods, techniques, and materials have been implemented to mitigate these problems. Glass fiber-reinforced polymer (GFRP) bar presents itself as a solid alternative to replace conventional steel reinforcement owing to its fantastic features in resisting corrosion. Its demand is progressively increasing. Cement-based concrete, on the other hand, is not eco-friendly due to the excessive amount of carbon dioxide (CO₂) emissions yielded from its cement production. One of the alternatives used to mitigate the use of cement in concrete is fly ash. Fly ash is considered …

Characterization Of Alaskan Modified Asphalt Binders And Mixtures, Jun Liu

Doctoral Dissertations

"Modified asphalt binders and mixtures have been used more in recent years in Alaska. However, there has not been systematic characterization and performance data development for these materials. This study intends to systematically characterize the Alaskan asphalt binders and mixtures and identify the performance benefits of these materials through laboratory tests and field sections monitoring. The research contains five sections: 1) a comprehensive characterization on the morphologies, chemical and rheological properties of modified asphalt binders and mechanical properties of asphalt mixtures with these modified asphalt binders. The lab testing results were further confirmed through field surveys of recent paving projects …

Environmental Hygiene For Covid-19: It's All About The Mask, Daniel B. Oerther, Mona Shattell

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

A System Dynamics Model For Construction Safety Behavior, Mohamad Abdul Nabi, Islam H. El-Adaway, Cihan H. Dagli

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Construction Industry has always been reputed by its high incident rates and poor safety performance. Construction accidents are, in most cases, resulted from the unsafe behaviors of construction workers on site. The study of workers' behavior is crucial in order to understand the causation of unsafe behaviors. Therefore, the objective of this paper is to simulate construction safety behavior in order to predict the number of safety incidents and better understand their causation factors. The simulation model illustrates how construction system influences construction labors on site in terms of unsafe behavior. The standard leading indicators of safety performance are first …

A System Dynamics Approach For Study Of Population Growth And The Residential Housing Market In The Us, Gasser Galal Ali, Islam H. El-Adaway, Cihan H. Dagli

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The US Consensus bureau estimated the total construction spending at 1,320,305 Million Dollars, in February 2020, with an increase of 1.1% since last February. The construction market is large, and risky. Prediction of the market behavior, for several years ahead, is needed in order to take strategic investment decision for long and expensive projects. The goal of this research is to study the relationship between population growth and the housing market. To that end, a system dynamics model is developed. System dynamics is a top-down approach that starts with the high-level behavior of a complex system to simulate the behavior …

A System-Of-Systems Model To Simulate The Complex Emergent Behavior Of Vehicle Traffic On An Urban Transportation Infrastructure Network, Rayan Assaad, Cihan H. Dagli, Islam H. El-Adaway

Engineering Management and Systems Engineering Faculty Research & Creative Works

Transportation agencies face escalating challenges in forecasting the traffic demand. Traditional prediction methods focused on individual transportation sectors and failed to study the inter-dependencies between the different transportation systems. Hence, there is a need for more advanced and holistic modeling techniques. To this end, this paper models and analyses an urban transportation system-of-systems incorporating seven various systems: population and GDP, CO₂ emission, gasoline price and total vehicle trips, traffic demand, public and private transportation, transportation investment, and traffic congestion. Accordingly, this research simulates transportation networks as a collection of task-oriented systems that combine their resources to form a complex …