Open Access. Powered by Scholars. Published by Universities.®

Civil Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Transportation Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 871 - 900 of 985

Full-Text Articles in Civil Engineering

Creating A National Nonmotorized Traffic Count Archive: Process And Progress, Krista Nordback, Kristin A. Tufte, Morgan Harvey, Nathan Mcneil, Elizabeth Stolz, Jolene Liu Jan 2015

Creating A National Nonmotorized Traffic Count Archive: Process And Progress, Krista Nordback, Kristin A. Tufte, Morgan Harvey, Nathan Mcneil, Elizabeth Stolz, Jolene Liu

Civil and Environmental Engineering Faculty Publications and Presentations

Robust bicycle and pedestrian data on a national scale would help promote effective planning and engineering of walking and bicycling facilities, build the evidence-based case for funding such projects, and dispel notions that walking and cycling are not occurring. To organize and promote the collection of nonmotorized traffic data, a team of transportation professionals and computer scientists is creating a national bicycle and pedestrian count archive. This archive will enable data sharing by centralizing continuous and short-duration traffic counts in a publicly available online archive. Although other archives exist, this will be the first archive that will be national in …


Evolution And Usage Of The Portal Data Archive: 10-Year Retrospective, Kristin A. Tufte, Robert Bertini, Morgan Harvey Jan 2015

Evolution And Usage Of The Portal Data Archive: 10-Year Retrospective, Kristin A. Tufte, Robert Bertini, Morgan Harvey

Civil and Environmental Engineering Faculty Publications and Presentations

The Portal transportation data archive (http://portal.its.pdx.edu/) was begun in June 2004 in collaboration with the Oregon Department of Transportation, with a single data source: freeway loop detector data. In 10 years, Portal has grown to contain approximately 3 TB of transportation-related data from a wide variety of systems and sources, including freeway data, arterial signal data, travel times from Bluetooth detection systems, transit data, and bicycle count data. Over its 10-year existence, Portal has expanded both in the type of data that it receives and in the geographic regions from which it gets data. This paper discusses the …


Traffic Conflict Analysis Under Fog Conditions Using Computer Simulation, Binya Zhang Jan 2015

Traffic Conflict Analysis Under Fog Conditions Using Computer Simulation, Binya Zhang

Electronic Theses and Dissertations

The weather condition is a crucial influence factor on road safety issues. Fog is one of the most noticeable weather conditions, which has a significant impact on traffic safety. Such condition reduces the road's visibility and consequently can affect drivers' vision, perception, and judgments. The statistical data shows that many crashes are directly or indirectly caused by the low-visibility weather condition. Hence, it is necessary for road traffic engineers to study the relationship of road traffic accidents and their influence factors. Among these factors, the traffic volume and the speed limits in poor visibility areas are the primary reasons that …


Numerical Study Of Structural Responses Of Rigid And Flexible Pavements Under Heavy Vehicles’ Loading, Rezwana Kabir Jan 2015

Numerical Study Of Structural Responses Of Rigid And Flexible Pavements Under Heavy Vehicles’ Loading, Rezwana Kabir

Dissertations, Master's Theses and Master's Reports

The highway system serves as the most critical transportation link in the economic development of a nation. In Michigan, about 74% of all the commodities delivered annually are transported by heavy trucks. The Michigan Department of Transportation (MDOT) permits multi-axle (11 axles) heavy truck with gross vehicle weight (GVW) limit of 164,000 lb., unlike many states having GVW limit of 80,000 lb. The effect of these heavy truck loadings on pavements might accelerate the rate of deterioration for flexible and rigid pavement structures. More detailed knowledge of the interaction of trucks with the pavement structure is essential for better management …


Color Removal From Pulp Mill Effluent Using Coal Ash Produced From Georgia Power Coal Combustion Plants, Christopher B. Willett Jan 2015

Color Removal From Pulp Mill Effluent Using Coal Ash Produced From Georgia Power Coal Combustion Plants, Christopher B. Willett

College of Graduate Studies: Theses & Dissertations

Two environmental concerns currently face Georgia: coal fly ash (CFA) waste from coal power plants, and the effluent generated by pulp mills. Pulp mill effluent discolors surface waters into which it is discharged, and has been proven to negatively impact the dissolved oxygen and carbon necessary for aquatic life. The proposed solution is a cost-effective adsorption treatment using an inexpensive but abundantly available waste material: CFA. CFA possesses beneficial properties that allow it to effectively remove contaminants, and is available at significantly reduced cost. The primary research objective was to define treatment parameters that would result in the maximum removal …


Effect Of Lateral Stiffness On Bridge Deck Performance, Andrea Del Pilar Toro Jan 2015

Effect Of Lateral Stiffness On Bridge Deck Performance, Andrea Del Pilar Toro

UNF Graduate Theses and Dissertations

The use of the empirical deck design method has increased its acceptance due to the economic advantages that it presents when compared to its counterpart, the traditional method. This can be attributed to the fact that the empirical method provides an appropriate design where the deck withstands stress not only due to the steel reinforcement but to an implicit arching membrane stress set-up as an effect of the lateral restraint surrounding the deck slab known as Compressive Membrane Action (CMA).

It has been proved through research that most design codes underestimate the strength of laterally restrained slabs. However, there is …


Exact Controllability Of The Lazer-Mckenna Suspension Bridge Equation, Lanxuan Yu Dec 2014

Exact Controllability Of The Lazer-Mckenna Suspension Bridge Equation, Lanxuan Yu

UNLV Theses, Dissertations, Professional Papers, and Capstones

It is well known that suspension bridges may display certain oscillations under external aerodynamic forces. Since the collapse of the Tacoma Narrows suspension bridge in 1940, suspension bridge models have been studied by many researchers. Based upon the fundamental nonlinearity in suspension bridges that the stays connecting the supporting cables and the roadbed resist expansion, but do not resist compression, new models describing oscillations in suspension bridges have been developed by Lazer and McKenna [Lazer and McKenna (1990)]. Except for a paper by Leiva [Leiva (2005)], there have been very few work on controls of the Lazer-McKenna suspension bridge models …


Integrating Pro-Environmental Behavior With Transportation Network Modeling: User And System Level Strategies, Implementation, And Evaluation, Husain M. Abdul Aziz Oct 2014

Integrating Pro-Environmental Behavior With Transportation Network Modeling: User And System Level Strategies, Implementation, And Evaluation, Husain M. Abdul Aziz

Open Access Dissertations

Personal transport is a leading contributor to fossil fuel consumption and greenhouse (GHG) emissions in the U.S. The U.S. Energy Information Administration (EIA) reports that light-duty vehicles (LDV) are responsible for 61\% of all transportation related energy consumption in 2012, which is equivalent to 8.4 million barrels of oil (fossil fuel) per day. The carbon content in fossil fuels is the primary source of GHG emissions that links to the challenge associated with climate change. Evidently, it is high time to develop actionable and innovative strategies to reduce fuel consumption and GHG emissions from the road transportation networks. This dissertation …


Multiple Reference Impact Testing Of Bridges Using A Network Of Low-Cost Dynamic Exciters, James David Lindsey Aug 2014

Multiple Reference Impact Testing Of Bridges Using A Network Of Low-Cost Dynamic Exciters, James David Lindsey

Graduate Theses and Dissertations

Multiple Reference Impact Testing (MRIT) is a form of Experimental Modal Analysis (EMA) that can be used to identify the dynamic properties of full-scale bridges. These dynamic properties include natural frequencies, mode shapes, damping ratios, modal scaling and modal flexibility. Since these system properties that are directly related to the mass and stiffness characteristics of a structure, impact test measurements can be used to quantitatively characterize condition of a structure. Over time, changes in the properties can be monitored and evaluated as indicators of damage or deterioration. Instrumented hammers and drop masses are typically used to perform MRIT by providing …


The Investigation Of Cold-Mix Asphalt Creep Stiffness Testing Using Multiple Test Apparatuses And Gradations, Alexander Jackson May 2014

The Investigation Of Cold-Mix Asphalt Creep Stiffness Testing Using Multiple Test Apparatuses And Gradations, Alexander Jackson

Graduate Theses and Dissertations

Many current methods of designing and testing Cold In-Place Recycled (CIR) asphalt are undesirable because they require large amounts of material and significant preparation. In an effort to lessen the cost and time of materials testing, this research utilizes several different methods of small scale testing of creep stiffness. These methods include using a Discovery Hybrid Rheometer (DHR) and a three point bending test to find the creep stiffness of emulsion based CIR. The new testing methods utilized samples on the scale of up to a hundredth the size of what the traditional methods of testing require. The two smaller …


A Comparative Assessment Of Crowded Source Travel Time Estimates: A Case Study Of Bluetooth Vs Inrix On A Suburban Arterial, Fahad Fasha Alhajri Jan 2014

A Comparative Assessment Of Crowded Source Travel Time Estimates: A Case Study Of Bluetooth Vs Inrix On A Suburban Arterial, Fahad Fasha Alhajri

Civil and Environmental Engineering Master's Project Reports

Travel time is one of the most widely used measures of traffic performance monitoring for the transportation systems. It is a simple concept that refers to the time required to traverse between two points of interest. Travel time is communicated and used by a wide variety of audience such as commuters, media reporters, and transportation engineers and planners. Recent developments within the wireless communication area made it possible to collect travel time data at a relatively low cost. These emerging technologies include mobile phone based technologies, in-vehicle navigation technologies and automatic vehicle identification technologies. Although these technologies offer a great …


Phase I Assessment Of Guardrail Length-Of-Need, Francisco Daniel B. Albuquerque, Cody S. Stolle, Dean L. Sicking, Ronald K. Faller, Karla A. Lechtenberg Jan 2014

Phase I Assessment Of Guardrail Length-Of-Need, Francisco Daniel B. Albuquerque, Cody S. Stolle, Dean L. Sicking, Ronald K. Faller, Karla A. Lechtenberg

Mid-America Transportation Center: Final Reports and Technical Briefs

Report No. TRP-03-284-14


Roadside Grading Guidance - Phase Ii, Kevin D. Schrum, Francisco D. B. Albuquerque, Dean L. Sicking, Ronald K. Faller, John D. Reid Jan 2014

Roadside Grading Guidance - Phase Ii, Kevin D. Schrum, Francisco D. B. Albuquerque, Dean L. Sicking, Ronald K. Faller, John D. Reid

Mid-America Transportation Center: Final Reports and Technical Briefs

Phase I of this project relied on assumptions surrounding crash data from the state of Ohio in 2000. The number of fatal and severe crashes in that year was significantly lower than average. As a result, the conclusions were indefinite. Phase II was carried out using crash data from the state of Ohio over seven years. The increased pool of data removed the need for many of the underlying assumptions used in Phase I and provided a solid foundation of conclusions and recommendations.

The number of fatal and severe crashes that occurred on each slope and height for each functional …


Testing And Strengthening Bridge Connections, Christopher Higgins, Peter Dusicka, Michael Scott Jan 2014

Testing And Strengthening Bridge Connections, Christopher Higgins, Peter Dusicka, Michael Scott

TREC Project Briefs

Researchers evaluate and improve the strength of gusset plate connections, essential pieces in bridge design that can fail due to buckling.


Equity And Fairness In Transport Planning: The State Of Play, Sarah Rock, Aoife Ahern Prof., Brian Caulfield Dr. Jan 2014

Equity And Fairness In Transport Planning: The State Of Play, Sarah Rock, Aoife Ahern Prof., Brian Caulfield Dr.

Conference Papers

This paper explores the concept of equity, or fairness, in transport. As a pillar of sustainable development, social equity is an important objective of transport planning. The provision of transport infrastructure can have significant equity impacts on society through the distribution of costs and benefits. In recent years, there has been an increase in research interest in transportation related equity issues. The paper outlines the primary theoretical traditions that relate to equity and transport equity, and how equity concerns are currently addressed and evaluated in academia and in practice. Recent research has attempted to establish stronger principles from which to …


Evaluation Of Truck Signal Priority At N Columbia Blvd And Martin Luther King Jr. Blvd Intersection: Vissim Micro Simulation Analysis Of Truck Signal Priority, Maisha Mahmud Jan 2014

Evaluation Of Truck Signal Priority At N Columbia Blvd And Martin Luther King Jr. Blvd Intersection: Vissim Micro Simulation Analysis Of Truck Signal Priority, Maisha Mahmud

Civil and Environmental Engineering Master's Project Reports

Given the importance of over growing freight transportation system worldwide, engineers and planners are faced with the challenge of improving freight service in urban area using low cost measure. Truck Signal Priority is one of the strategy that can be used to improve operational efficiency with enhance safety benefits (red light running) of freight service, without major capital investment. In light to this interest this study focus on evaluating the impacts of freight signal priority on a high truck density intersection like N Columbia Blvd and NE Martin Luther King Jr. Blvd. Using a simulation tool, VISSIM, these impacts were …


Applications Of Transit Signal Priority Technology For Transit Service, Frank Anthony Consoli Jan 2014

Applications Of Transit Signal Priority Technology For Transit Service, Frank Anthony Consoli

Electronic Theses and Dissertations

This research demonstrated the effectiveness of Transit Signal Priority (TSP) in improving bus corridor travel time in a simulated environment using real world data. TSP is a technology that provides preferential treatment to buses at signalized intersections. By considering different scenarios of activating bus signal priority when a bus is 3 or 5 minutes behind schedule, it was demonstrated that bus travel times improved significantly while there is little effect on delays for crossing street traffic. The case of providing signal priority for buses unconditionally resulted in significant crossing street delays for some signalized intersections with only minor improvement to …


Urban Expressway Safety And Efficiency Evaluation And Improvement Using Big Data, Qi Shi Jan 2014

Urban Expressway Safety And Efficiency Evaluation And Improvement Using Big Data, Qi Shi

Electronic Theses and Dissertations

In an age of data explosion, almost every aspect of social activities is impacted by the abundance of information. The information, characterized by alarming volume, velocity and variety, is often referred to as "Big Data". As one fundamental elements of human life, transportation also confronts the promises and challenges brought about by the Big Data era. Big Data in the transportation arena, enabled by the rapid popularization of Intelligent Transportation Systems (ITS) in the past few decades, are often collected continuously from different sources over vast geographical scale. Huge in size and rich in information, the seemingly disorganized data could …


Generic Incident Model For Investigating Traffic Incident Impacts On Evacuation Times In Large-Scale Emergencies, Andrew J. Collins, Peter Foytik, Erika Frydenlund, R. Michael Robinson, Craig A. Jordan Jan 2014

Generic Incident Model For Investigating Traffic Incident Impacts On Evacuation Times In Large-Scale Emergencies, Andrew J. Collins, Peter Foytik, Erika Frydenlund, R. Michael Robinson, Craig A. Jordan

VMASC Publications

Traffic incidents cause a ripple effect of reduced travel speeds, lane changes, and the pursuit of alternative routes that results in gridlock on the immediately affected and surrounding roadways. The disruptions caused by the secondary effects significantly degrade travel time reliability, which is of great concern to the emergency planners who manage evacuations. Outcomes forecast by a generic incident model embedded in a microscopic evacuation simulation, the Real-Time Evacuation Planning Model (RtePM), were examined to quantify the change in time required for an emergency evacuation that results from traffic incidents. The incident model considered vehicle miles traveled on each individual …


Numerical Simulations Of Dynamic Behavior Of Polyurea Toughened Steel Plates Under Impact Loading, Chien-Chung Chen, Daniel G. Linzell Jan 2014

Numerical Simulations Of Dynamic Behavior Of Polyurea Toughened Steel Plates Under Impact Loading, Chien-Chung Chen, Daniel G. Linzell

Department of Civil and Environmental Engineering: Faculty Publications

The objective of the work discussed herein is to develop a nonlinear 3D finite element model to simulate dynamic behavior of polyurea toughened steel plates under impact loading. Experimental and numerical work related to model development are presented. Material properties are incorporated into numerical models to account for strain-rate effects on the dynamic behavior of polyurea and steel. One bare steel plate and four polyurea toughened steel plates were tested under impact loading using a pendulum impact device. Displacement time-history data from experimental work was used to validate the numerical models. Details on material model construction, finite element model development, …


Assessment Of Load Sharing Members In An Anti-Ram Bollard System, Scott Kinney, Daniel Linzell, Edward O'Hare Jan 2014

Assessment Of Load Sharing Members In An Anti-Ram Bollard System, Scott Kinney, Daniel Linzell, Edward O'Hare

Department of Civil and Environmental Engineering: Faculty Publications

Due to the increased frequency, scale, and danger of malicious attacks carried out by Vehicle Borne Improvised Explosive Devices (VBIEDs), anti-ram bollards have become a key element in the protection of critical structures. This study focused on the evaluation of above grade load sharing members in a steel anti-ram bollard system in an attempt to develop efficient load sharing mechanisms that improve the structure’s ability to resist vehicle impacts, while concurrently remaining aesthetically pleasing to the general public. A computational assessment was completed using calibrated LS-DYNA finite element models to determine if effective load sharing member configurations and designs could …


Field Tests And Numerical Modeling Of Vehicle Impacts On A Boulder Embedded In Compacted Fill, Lynsey Reese, Tong Qiu, Daniel Linzell, Edward O'Hare, Zoltan Rado Jan 2014

Field Tests And Numerical Modeling Of Vehicle Impacts On A Boulder Embedded In Compacted Fill, Lynsey Reese, Tong Qiu, Daniel Linzell, Edward O'Hare, Zoltan Rado

Department of Civil and Environmental Engineering: Faculty Publications

Landscape Vehicular Anti-Ram (LVAR) systems are a group of protective barriers, which are designed using natural materials (e.g., boulders) and have proven to both effectively protect sensitive structures against threats and be aesthetically pleasing. This paper presents two consecutive vehicular crash tests hitting the same single boulder embedded in AASHTO coarse aggregate fill. A LS-DYNA model was developed to simulate the field-scale tests, which were instrumented with high-speed cameras and pressure cells. A readily available truck model from the National Crash Analysis Center was modified and implemented in the LS-DYNA model. The boulder and surrounding soil were modeled using the …


Concession Analysis For Highway Infrastructure Projects Financed As Public-Private Partnerships, Tanaphat Jeerangsuwan Jan 2014

Concession Analysis For Highway Infrastructure Projects Financed As Public-Private Partnerships, Tanaphat Jeerangsuwan

Open Access Dissertations

Public funds allocated to the improvement and maintenance of highway infrastructure have reached the limits due to a rapid rate of socioeconomic growth and deterioration in infrastructure system performance. A public-private partnership (PPP) concessions a contractual and project financing mechanism that helps public authorities lessen the impact of their limited financial resources. In this project financing scheme, a public authority enters into a partnership with a private concessionaire for the purpose of developing a specific infrastructure facility. In return, the concessionaire receives the right to operate for a specified period of time. This creates strong potential for the delivery of …


Heavy Vehicle Performance During Recovery From Forced-Flow Urban Freeway Conditions Due To Incidents, Work Zones And Recurring Congestion, Alexander Drakopoulos, Yue Liu, Alan Horowitz Dec 2013

Heavy Vehicle Performance During Recovery From Forced-Flow Urban Freeway Conditions Due To Incidents, Work Zones And Recurring Congestion, Alexander Drakopoulos, Yue Liu, Alan Horowitz

Civil and Environmental Engineering Faculty Research and Publications

Information contained in the Highway Capacity Manual on the influence heavy vehicles have on freeway traffic operations has been based on few field data collection efforts and relied mostly on traffic simulation efforts. In the 2010 Manual heavy vehicle impact is evaluated based on “passenger car equivalent” values for buses, recreational vehicles and trucks. These values were calibrated for relatively uncongested freeway conditions (levels of service A through C) since inadequate field data on heavy vehicle behavior under congested conditions were available. A number of field data collection efforts, that were not included in deriving the passenger car equivalent values …


Effect Of Lightweight Aggregate Moisture Content On Internally Cured Concrete, Casey Jones Aug 2013

Effect Of Lightweight Aggregate Moisture Content On Internally Cured Concrete, Casey Jones

Graduate Theses and Dissertations

Putting an end to the rapid deterioration of concrete structures in the United States will only occur through the introduction of better materials and construction methods. The American Society of Civil Engineers (ASCE) reports the overall condition of concrete bridges in the United States to be a "C+". Though better than other areas of the infrastructure, there is still room for improvement in concrete bridges. One major area that may be improved is that of the concrete bridge deck. The bridge deck is comprised of the actual driving surface. It is subject to many deterioration mechanisms including freeze/thaw cycles, de-icing …


Structural Reliability Analysis Of Corroded Steel Girder Bridge, Mohammed Shaalan Al Badran Jul 2013

Structural Reliability Analysis Of Corroded Steel Girder Bridge, Mohammed Shaalan Al Badran

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The natural aging, environmental impact, and appropriate design are certainly playing a serious role in safety of the bridges function. The functional safety of bridge constitutes a prime element of the transportation system serving commuters, passengers and freight. According to Federal Highway Administration, the steel bridges share represents a large amount of the United States’ bridges. In last century, the collapse of both the Silver Bridge at Point Pleasant, West Virginia over the Ohio River on December 15, 1967 and over the Mianus River Bridge in Connecticut on June 28, 1983 showed that steel corrosion has been the leading reason …


Exploring Factors Contributing To Injury Severity At Freeway Merging And Diverging Locations In Ohio, Worku Y. Mergia, Deogratias Eustace, Deo Chimba, Maher Butros Qumsiyeh Jun 2013

Exploring Factors Contributing To Injury Severity At Freeway Merging And Diverging Locations In Ohio, Worku Y. Mergia, Deogratias Eustace, Deo Chimba, Maher Butros Qumsiyeh

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Identifying factors that affect crash injury severity and understanding how these factors affect injury severity is critical in planning and implementing highway safety improvement programs. Factors such as driver-related, traffic-related, environment-related and geometric design-related were considered when developing statistical models to predict the effects of these factors on the severity of injuries sustained from motor vehicle crashes at merging and diverging locations. Police-reported crash data at selected freeway merging and diverging areas in the state of Ohio were used for the development of the models. A generalized ordinal logit model also known as partial proportional odds model was applied to …


Return To Traffic Of Full Depth Reclamation Pavements, Robert Benjamin Hill May 2013

Return To Traffic Of Full Depth Reclamation Pavements, Robert Benjamin Hill

Graduate Theses and Dissertations

Full-Depth Reclamation (FDR) is a cost-effective rehabilitation treatment for deteriorated pavements. However, when using asphalt emulsion based rehabilitation techniques one of the most challenging aspects of FDR is determining when traffic can be returned to the rehabilitated pavement surface. Since asphalt emulsion mixtures need ample time for curing, they cannot be sealed with a surface layer until the water has evaporated from the rehabilitated layer. It is often not possible to keep the road closed until all of the water has evaporated and the surface layer is placed, therefore, at some point the traffic needs to be returned to the …


The Role Of Proximity In Reducing Auto Travel: Using Vmt To Identify Key Locations For Development, From Downtown To The Exurbs, Robert B. Case Apr 2013

The Role Of Proximity In Reducing Auto Travel: Using Vmt To Identify Key Locations For Development, From Downtown To The Exurbs, Robert B. Case

Civil & Environmental Engineering Theses & Dissertations

The purpose of this dissertation is to discover the VMT impact of each level of proximity in order to help government identify key locations for housing development, and thereby lower VMT and reduce dependence on foreign oil. By discovering the VMT impact of each level of proximity, this dissertation provides a) the first known means of calculating the proximity-based VMT benefit of subject locations by individual proximity level, and b) the new finding that it is likely that high VMT benefit can be achieved at moderate proximity levels acceptable to many households, enabling representative governments to be politically successful while …


Effective Criteria For Seismic Rehabilitation Planning Of Road Transportation Infrastructures, Mohammadreza Yadollahi, Rosli Mohamad Zin, Sadegh Asgari Mar 2013

Effective Criteria For Seismic Rehabilitation Planning Of Road Transportation Infrastructures, Mohammadreza Yadollahi, Rosli Mohamad Zin, Sadegh Asgari

Civil Engineering Faculty Publications

While seismic rehabilitation process for road infrastructures has been traditionally based on seismic factors, consideration of non-seismic factors is necessary for reliable project ranking. Non-seismic factors include socioeconomic criteria, determining the value of a project to its users’ community. Based on the information obtained from a questionnaire survey and literature review, this paper identifies a set of effective rehabilitation criteria (ERC) for seismic rehabilitation decision-making to develop a priority index that is applied to determine the rehabilitation priority. The identified RC will then be weighted for four types of road structures including bridges, tunnels, retaining walls, and buildings. The results …