Civil Engineering Commons^™

A Comparative Study Of Cadworx Plant 2018 And Revit 2020 With Ez-Iso Add-In, For The Production Of Piping Isometrics, Bim Tudublin, Killian Lynch

Capstone Reports

BIM software evaluation and selection is a complex process. In this paper, a comparative study of Revit 2020 with Ez-ISO add-in, and CADWorx Plant 2018, was carried out. The aim of this study was to determine if a MEP contractor could consolidate software usage into one package, thereby reducing costs for pipework modelling and isometric production. A comprehensive evaluation was developed based on a literature review. A multicriteria decision-making method was used in conjunction with the software evaluation to ensure sound choices were made. An online survey of senior BIM professionals was conducted to validate the analysis and findings. The …

A Critical Appraisal Of Findings And Solutions To Overcome Erroneous Bim Model Production And Information Delivery Workflows, Bim Tudublin, Ryan Forde

Capstone Reports

There are many varying definitions of Building Information Modelling, all of which reflect its transformative capabilities and impact on the construction sector. BIM is an emerging technological and procedural shift within the AEC industry (Succar, 2009). BIM is not just a technological change, but also a procedural and workflow change (Charles Eastman, 2018). Despite the growth of BIM adoption and increasing levels of maturity regarding BIM standards, numerous issues still arise at a micro level during project execution. BIM invokes the need for workflows, frameworks and processes that imparts knowledge, heightens trust, increases efficiency and consistency while reducing fragmentation and …

Holistic Resilience Quantification Framework Of Rural Communities, Amanda Melendez

Theses and Dissertations--Civil Engineering

Communities need to prepare for anticipated hazards, adapt to varying conditions, and resist and recover rapidly from disturbances. Protecting the built environment from natural and man-made hazards and understanding the impact of these hazards helps allocate resources efficiently. Recently, an indicator-based and time-dependent approach was developed for defining and measuring the functionality and disaster resilience continuously at the community level. This computational method uses seven dimensions that find qualitative characteristics and transforms them into quantitative measures. The proposed framework is used to study the resilience of rural communities’ subject to severe flooding events. Harlan County in the Appalachian region is …

Seismic Performance Of Mechanically Spliced Bridge Columns Through Analytical Studies, Mathew Ray Lavoy

Electronic Theses and Dissertations

Reinforcement continuity in concrete members is traditionally achieved through lap splicing. Mechanical bar splices are an alternative to traditional lap splices. Mechanical bar splices utilize mechanical devices known as bar coupler to connect the ends of reinforcing bars. Bar couplers are common in accelerated bridge construction applications at non-critical members but are not allowed in the plastic hinge region of bridge columns probably due to a lack of knowledge on how they affect seismic performance of columns. A comprehensive analytical study was carried out to determine how bar couplers used at the base of bridge columns affect: 1) column lateral …

Peak Pressures On Low Rise Buildings: Cfd With Les Versus Full Scale And Wind Tunnel Measurements, Aly Mousaad Aly, Hamzeh Gol-Zaroudi

Faculty Publications

This paper focuses on the processes of wind flow in the atmospheric boundary layer, to produce realistic full-scale pressures for the design of low-rise buildings. CFD with LES turbulence closure is implemented on a scale 1:1 prototype building. A proximity study was executed computationally in CFD with LES that suggests new recommendations on the computational domain size, in front of a building model, apart from common RANS-based guidelines (e.g. COST and AIJ). Our findings suggest a location of the test building, different from existing guidelines, and the inflow boundary proximity influences pressure correlation and reproduction of peak loads. The CFD …

Comparision Of Fillet-Welded Base Plate Fatigue Design For Highway Support Structures With Laboratory Research Tests, William Shea

Williams Honors College, Honors Research Projects

There are many types of vertical structures along highways that serve unique purposes. These structures include traffic signs for directing, warning, or regulating traffic, luminaires for distributing and directing light, traffic signals supporting equipment such as traffic lights, and combination structures including any combination of the aforementioned structures. Highway support structures are typically fabricated from steel or aluminum and are designed to the guidelines and specifications of the AASHTO Standard Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals. The structures are connected to a foundation by anchor bolts through a welded base plate. Often a cause …

Steel Bridge Truss Analysis, Alastair Seed

Williams Honors College, Honors Research Projects

The purpose of this project is to conduct a study comparing the effectiveness of different cross frame orientations in lowering the deflection of the main stringers of a bridge. Three different orientations of cross frames were researched; vertical, angled with the superstructure webbing, and halfway-angled. All of these were studied when the stringers were placed directly under the superstructure and when the superstructure was placed outside of the stringers. Analysis was performed in a program called SAP 2000 to find the deflections along the stringers under different loading conditions. The results showed that when the superstructure was oriented over the …

Experimental And Field Evaluation Of Frp Pedestrian Bridge Decks, Kalrav Singh Tomer

Graduate Theses, Dissertations, and Problem Reports (ETD)

Traditional materials such as steel, timber, and concrete have continued to dominate their usage in civil infrastructure. They offer great advantages like strength and stiffness but at the same time they pose major issues in terms of durability and maintenance. Fiber reinforced polymer (FRP) exhibits outstanding properties like lightness, excellent corrosion and wear resistance along with superior thermo-mechanical properties. Glass FRPs (GFRPs) have emerged as one of the best alternatives in the field of civil infrastructure. It has been more than four decades since fiber reinforced polymer (FRP) composites have gained notable applications in civil infrastructure industry. However, FRPs have …

On-Site Measurement Of The Water-Cementitious Ratio And Heat Of Hydration Of Delivered Concrete, Seyednavid Mardmomen

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this study, AASHTO T318-15 was adopted to estimate the water content of fresh concrete mixes and then revised to have better precision. The additional step required sieving out the coarse aggregate after drying the sample in a microwave oven, and it was then used in the calculation of the absorbed water and cementitious material content. Several laboratory batches, as well as on-site water-cementitious (w/cm) ratio tests, were performed on concrete mixes containing ordinary Portland cement, ground granulated blast furnace slag, and Class F fly ash. The results of the experiments indicated that the accuracy of the revised method was …

Field Evaluation Of A Modular Press-Brake-Formed Steel Tub Girder In An Application That Includes Skew And Superelevation, Adam D. Roh

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Short Span Steel Bridge Alliance (SSSBA) is a group of bridge and culvert industry leaders (including steel manufacturers, fabricators, service centers, coaters, researchers, and representatives of related associations and government organizations) who have joined together to provide educational information on the design and construction of short span steel bridges in installations up to 140’-0” in length. A technical working group from within the SSSBA developed the notion for the modular shallow press-brake-formed steel tub girder as a solution for the short span steel bridge market.

After extensive testing at West Virginia University and multiple successful field demonstrations, members of …

Can The Integration Of Bim And Gis Enhance Information Management For Large Scale Linear Infrastructure Projects?, Bim Tudublin, Brendan Kennedy

Capstone Reports

The integration of BIM and GIS is the subject of considerable research, particularly as the two coalesce for the purpose of information management. Large scale infrastructure projects require best practice in terms of how information is managed given the volume of information generated throughout the project lifecycle and the numerous parties requiring access to project content. This paper investigates whether the integration of BIM and GIS can enhance information management on large scale linear infrastructure projects. The research comprised a literature review and interviews with a number of BIM/GIS professionals actively working on linear infrastructure projects across the world. Some …

Civil Engineering Research In Ireland 2020: Conference Proceedings, Kieran Ruane, Vesna Jaksic, Bidisha Ghosh, Magdalena Hajdukiewicz, Ciaran Hanley, Niall Holmes, Jennifer Keenahan, Zili Li, Patrick Mcgetrick, Ted Mckenna, Mary Moloney, Vikram Pakrashi, Niamh Power

Publications

Civil Engineering Research in Ireland 2020: Conference Proceedings.

Computational Fluid Dynamics Simulation Of Rain-Wind-Induced Vibration Of Stay Cables, Hongfan Wang

Dissertations and Theses

Due to the large amplitude, frequent occurrence and severe consequences, the rain-wind induced vibration (RWIV) of stay cables in cable-stayed bridges has been investigated extensively by researchers around the world. However, the underlying excitation mechanism is still unclear. Recently, computational fluid dynamics (CFD) simulation has been widely applied in the research on structure vibrations due to dynamic wind loads, with great potential as an alternative tool for wind tunnel testing. It has also been adopted to investigate the RWIV, but only a few studies have been conducted so far. Furthermore, most of the CFD simulations reported in literatures are two-dimensional, …

Applications Of Ultra-High Performance Concrete, Zachary Plevny

Williams Honors College, Honors Research Projects

The main objective of this research paper is to determine the current applications of ultra-high performance concrete (UHPC). A second objective is to determine the reason UHPC is used in various applications. More than 17 bridges in the United States have been built with UHPC components. A handful of state departments of transportation have deployed UHPC components within their infrastructure, and many more are actively doing research and considering the use of UHPC. So, this is a relatively new material that is becoming more widely used. The following seven projects, which include UHPC components are discussed in detail: Mars Hill …

A Review Of The Second Level Construction Studies Syllabus In Ireland: In Response To A Changing Technological Environment Promoting Digital Construction, Bim Tudublin, Nigel Wearen

Capstone Reports

The zeitgeist of Construction Studies ought to adopt digital construction and work practises. However, legacy is slow to change/adapt, and a lack of awareness persists. From the perspective of the continuing legacy (vocational training) of Construction Studies being linked with industry, this research explores how the subject could evolve to deliver new digital skill sets and to meet the demands of the Architecture, Engineering, and Construction (AEC) sector.A pilot study was undertaken with 24 Transition Year students. The method and content of the study was based on an existing model from the Design Engineering Construction in the UK and was …

A Critical Examination Of The Use Of Business Intelligence (Bi) In The Optioneering Of Generative Design Models: A Case Study., Bim Tudublin, Davitt Lamon

Capstone Reports

This research outlines the development of a generative des ign workflow for the architectural space planning of a 1,200 sq.m office located in Dublin, Ireland, and the application of statistical analysis and data visualisation for the optioneering of gen erated models. First, the paper defines a computational desig n model with the potential to generate a variety of office layouts, including circulation routes and desk locations. It then identifies three unique performance metrics that evaluate each design option. Finally, the study applies a multi objective genetic algorithm (MOGA) to explore the high dimensional design space of all potential options and …

Progressive Collapse Assessment Of Post-Tensioned Reinforced Concrete Flat Slab Structures Using Aem, Amgad Mahrous, Mariam Ehab, Hamed Hadhoud

Civil Engineering

Progressive collapse is defined as the failure of a primary vertical element of a structure, which may result in the failure of adjoining elements, consequently, leads to a partial or total collapse of the structure. Unified Facilities Criteria (UFC) and General Services Administration (GSA) guidelines used to assess the behavior of structures subjected to progressive collapse as a result of the loss of primary vertical support. For the current case study, numerical analysis is carried out for a typical ten-story reinforced concrete post-tensioned flat slab structure subjected to primary vertical element loss (corner column, edge column, internal column, edge shear …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

Strengthening Of Corroded Steel Structures Using Cfrp – An Experimental Review, Ghada El-Mahdy Ph.D., P.Eng, Abdallah H. Yassin, Abdel El Rahman Khaled

Civil Engineering

Fibre reinforced polymers (FRP) have been widely used to strengthen reinforced concrete structures, however, nowadays their use to strengthen steel structures is under investigation. In particular, the need to strengthen corroded steel structures found in aggressive environments, such as marine environments, which have undergone a reduction in cross-sectional area and hence a reduction in their load-carrying capacity is in need of studying. The main problems that arise when using carbon fibre reinforced polymer (CFRP) sheets to strengthen steel structures is the weakness in the interfacial bond between the CFRP and the steel surface, the thinness of CFRP sheet, and the …

Static Analysis Of Structural Members, Amani Calderon, Alexis Villalona, Farhad Alinaghizadeh

Publications and Research

This research is devoted to statics analysis of structural members under mechanical loads. Static analysis of beams under uniform transverse mechanical loads is presented. The beams are supported by simply supported boundary condition at both sides. The equilibrium equation of the beams is obtained and solved using analytical method and numerical method. The numerical method employed in this work is generalized differential quadrature (GDQ) method. The type of differential quadrature method used for numerical solution is the polynomial-based GDQ method. The differential equation is discretized into algebraic equations based on the GDQ technique. The algebraic equations are then solved to …

Static Analysis Of Circular Plates Under Mechanical Loads, Harpreet Lalia

Publications and Research

In this research statics analysis of circular plates is performed using SolidWorks.

Circular plates with different material properties, thickness to radius ratios, and boundary conditions under mechanical loads are modeled and analyzed in SolidWorks.

The results are obtained for deflections of circular plates under uniform and point loads.

A three-dimensional (3D) model of circular plates is first created in SolidWorks. Then the material properties, mechanical loads and boundary conditions are defined for the plate.

It is found deflection of plates is depended on magnitude of mechanical loads, geometrical parameters, boundary conditions and material properties. Responses of SolidWorks for deflections of …

Influence Of Nh4f In Dextran Based Biopolymer Electrolytes: Conductivity And Electrical Analysis, Muhamad Hafiz Hamsan, Mohd Fakhrul Zamani Kadir, Shujahadeen Bakar Aziz, Muhammad Amirul Solihin Azha, Saifful Kamaluddin Muzakir

Makara Journal of Technology

Dextran polymer host was doped with different concentrations of ammonium fluoride (NH4F) via casting technique. In this present work, dextran-NH4F film has been employed to investigate the ionic conductivity using electrochemical impedance spectroscopy from 50 to 5 MHz. The highest room temperature conductivity is achieved at (2.33 ± 0.76) × 10-3 S cm-1 with 40 wt.% NH4F. The electrolyte is found to obey Arrhenius rule at high temperature with activation energy of 0.21 eV. Dielectric analysis has been performed to obtain better understanding on the conductivity pattern. The dielectric parameters e.g. ɛreal, ɛimag, Mreal, and Mimag have been tested as …

Neutron Diffraction Study Of Multiferroic 0.6nife2o4/0.4batio3 Composite, Engkir Sukirman, Yosef Sarwanto, Syahfandi Ahda, Andon Insani

Makara Journal of Technology

Neutron diffraction study on the 0.6NiFe2O4/0.4BaTiO3 multiferroic composite has been carried out. The 0.6NiFe2O4/0.4BaTiO3 multiferroic composites have been synthesized by solid reaction method. In this study, 20 g of BaTiO3 (BTO) and 20 g of NiFe2O4 (NFO) compounds were prepared from the powder raw materials of BaO3 and TiO2 for BTO, and NiO and Fe2O3 for NFO. Furthermore, both BTO and NFO were each crushed for 5 hours using High Energy Milling (HEM). Then the BTO and NFO were calcined in the furnace at 950 °C/5 hours and 900 °C/5 hours, respectively. Both NFO and BTO precursors were manually mixed …

Comprehensive Inspection On The Experimental Ferritic Stainless Steel By Means Of Transmission Electron Microscopy And Neutron Diffraction Techniques, Parikin Parikin, Mohammad Dani, Riza Iskandar, Aziz Khan Jahja, Andon Insani, Joachim Mayer

Makara Journal of Technology

The field of physical metallurgy is one of the primary beacons that guide alloy developments for multipurpose materials such as the in-core structure materials for pressure vessel components and heat exchangers. The surface microstructure of new ferritic steel with significant local constituent materials was characterized by high resolution powder neutron diffractometer (HRPD) and transmission electron microscope (TEM), combined with the energy dispersive X-ray spectroscopy (EDX). The alloy contains73% Fe, 24% Cr, 2% Si, 0.8% Mn, and 0.1% Ni, in %wt. The charge materials were melted by the casting techniques. The neutron diffractograms obtained shows five dominant diffraction peaks at (110), …

A New Synthesized Microalloys Steel Ods Of High Amplitude Ultrasonically Irradiation, Marzuki Silalahi, Hanif Abdurrahman Wicaksana, Ferhat Aziz, Syahfandi Ahda, Mohamad Riza Iskandar

Makara Journal of Technology

Micropowders of oxide-dispersion-strengthened (ODS) steel have been synthesized using the ultrasonic irradiation method with variations in amplitude. The ultrasonic irradiation process is performed for 50 h at a frequency of 20 kHz with 40%, 50%, and 60% amplitudes in toluene solution. The formation of Fe-Cr microalloys in the preparation of Fe- 15Cr-0.5Y2O3 powder was analyzed using SEM-EDS, X-ray diffraction (XRD), and TEM-EDS. The percentage of Fe- Cr phase mass fraction of ODS steel micropowder formed during ultrasonic irradiation with 40%:50%:60% amplitude was 12.2%:34.1%:22.1%, with 25.67:77.02:38.51 nm crystallite size. The crystallite size at 50% amplitude was the largest, and the diffusion …

Study On Antibacterial Of Chitosan/Hydroxyapatite Doped Magnesium Composite As A Material For Bone Graft Applications, Andromeda Dwi Laksono, Teodoro A. Amatosa, Jr., Hilda Pebrianti Octaviana Sitorus, Wentika Putri Kusuma Asih, Sulistijono Sulistijono

Makara Journal of Technology

Hydroxyapatite (HAp) is one of the constituent minerals of bone and teeth, that has been widely used for synthesizing bone graft. Due to the limitation on properties of the hydroxyapatite, it is doping with Magnesium (HAp-Mg). The addition of Chitosan (Chi) was expected to improve the antibacterial properties of HAp-Mg. The present research aims to study the influence of Chitosan with 0, 5, 15, and 25 wt% addition on biocompatibility properties of Chi/HAp-Mg composite. HAp-Mg was synthesized using the sol-gel method; meanwhile, Chi/HAp-Mg composite was manufactured by mixing Chitosan in acetic acid, and HAp-Mg was added into the mixture. The …

Evaluation Of Primal-Dual Splitting Algorithm For Mri Reconstruction Using Spatio-Temporal Structure Tensor And L1-2 Norm, Mia Rizkinia, Masahiro Okuda

Makara Journal of Technology

Magnetic resonance imaging (MRI) is an essential medical imaging technique which is widely used for medical research and diagnosis. Dynamic MRI provides the observed object visualization through time and results in a spatiotemporal signal. The image sequences often contain redundant information in both spatial and temporal domains. To utilize this characteristic, we propose a spatio-temporal reconstruction approach based on compressive sensing theory. We apply spatio-temporal structure tensor using nuclear norm, in addition to the wavelet sparsity regularization. The spatio-temporal structure tensor is a matrix that consists of gradient components of the MRI data w.r.t the spatial and temporal domains. For …

Acute Toxicitystudy Of Choline Based Ionic Liquids Towards Danio Rerio Fish And The Aggregation Behavior Of Their Binary Mixtures, Mansoor Ul Hassan Shah, Nasruddin Nasruddin, Suzana Bt Yusup, Muhammad Moniruzzaman

Makara Journal of Technology

Marine oil spills are effectively controlled by chemical dispersants. However, the toxicity associated with it reduce its employment in marine environment. To overcome this limitation, the acute toxicity of choline based ionic liquids was evaluated as a potential low toxic variant for oil spill remediation. Further, the aggregation behavior of the individual as well as their binary mixtures was also evaluated by employing tensiometry technique. The half-lethal concentration, LC50on zebrafish (Danio rerio) of three choline based ionic liquids showed that the studied ionic liquids (ILs) fall in the range of “practically nontoxic” ( 100-1000 mg L-1).Various micellar properties showed that …

Incorporating Geophysical Data In Slope Stability Modeling For Two Slopes In Arkansas, Vanessa Lebow

Graduate Theses and Dissertations

Slope failures in the United States alone cause millions of dollars in damage to infrastructure, threaten national monuments, create environmental hazards, and take an average of 25-50 lives a year. With the inevitable construction that occurs on slopes, it is imperative that the slopes be properly designed which requires a thorough understanding of slope grade, subsurface soil conditions, soil strength parameters, water table locations, and depth to bedrock across the entire site. The preferred method of data collection would be to use borings and other in-situ methods; however, sometimes due to cost constraints or site accessibility only a very limited …

Evaluation Of Concrete Deck Curing Regimens Using Capillary Pressure Sensing System, Samuel Spann

Graduate Theses and Dissertations

Early-age plastic shrinkage cracking is a common problem with the construction of concrete bridge decks due to the high surface area-to-volume ratio and exposure to potentially detrimental environmental effects. Curing regimens are utilized to mitigate cracking risk during the plastic stage of the concrete; the curing regimens evaluated for this study were wet burlap-polyethylene sheeting, two acrylic curing compounds, and one lithium compound. Capillary pressure in the water filled pores has been shown to correlate to the plastic shrinkage cracking risk of concrete. A new portable system has been developed to measure the capillary pressure that could potentially be used …