Civil Engineering Commons^™

Ergonomic Analysis Of Ui’S Bicyclesusing Posture Evaluation Index (Pei) Method In Virtual Environment, Erlinda Muslim, Boy Nurtjahyo, Zulkarnain Zulkarnain, Liza Afrinotha

Makara Journal of Technology

Ergonomic Analysis of UI’s Bicycles Using Posture Evaluation Index (PEI) Method in Virtual Environment. This research was conducted to study the ergonomic aspect of University of Indonesia’s bicycles in virtual environment. Software Jack 6.0 was used to analyze it. PEI was used as an approach that integrated the results of three methods: lower back analysis (LBA), ovako working posture analysis (OWAS), and rapid upper limb assessment (RULA). The research objective is to evaluate the existing design of University of Indonesia’s bicycles and to determine the most ergonomic redesign which concerns handlebar height and saddle height modification. The result showed that …

Design And Performance Of Load Bearing Shear Walls Made From Composite Rice Straw Blocks, Kevin Robert Camann

Master's Theses

Although rice straw and other grains have been used in building since pre-history, in the past two decades, there has been a move to utilize this rapidly renewable, locally available, agricultural byproduct as part of the sustainable construction movement. Up to this point, this has been done by simply stacking up the full straw bales. Stak Block, invented by Oryzatech, Inc., is a modular, interlocking block made of a composite of rice straw and binding agent that serves as an evolution in straw construction. This study investigates the feasibility of using these Stak Blocks as a structural system. The report …

Semi-Automatic Image Segmentation For Volumetric Visualization Of Pelvis Ct Scan-Images, Suprijanto Suprijanto, Farida I. Muchtadi, Irwan Setiawan

Makara Journal of Technology

Semi-Automatic Image Segmentation for Volumetric Visualization of Pelvis CT Scan-Images. The current development of computerized tomography (CT) has enable us to obtain cross sectional image using multi slicing techniques in an order of few seconds. The obtained images represent several tissue structures on cross section slice being imaged. One challenge to help diagnosis using CT images is extracting an anatomic structure of interest using a method of image segmentation and volumetric visualization with the assistance of computers. In case of volumetric visualization of pelvis bones extracted from multi-slice CT images, whole images which are containing part of pelvis bone structures …

Implementation Of Six Sigma Method To Maintain The Quality Of Construction Projects, Yusuf Latief, Retyaning Puji Utami

Makara Journal of Technology

Implementation of Six Sigma Method to Maintain The Quality of Construction Projects. Six sigma (6-sigma) is a method that widely developed in the world, especially in manufacturing industry to decrease failures in achieving good quality in construction projects. The objective of this research is to explore the existing condition of quality management and the aplication of 6-sigma method in maintaining quality of construction projects. Structured interviews to experienced experts and people who were recommended by their companies were conducted. Non-parametric analysis using frequencies distribution procedures were used for analysis. The result shows that existing condition in quality management of construction …

Mechanical Properties Of Ramie Fiber Reinforced Epoxy Lamina Composite For Socket Prosthesis, Tresna P. Soemardi, Widjajalaksmi Kusumaningsih, Agustinus Purna Irawan

Makara Journal of Technology

Mechanical properties of ramie fiber reinforced epoxy lamina composite for socket prosthesis. This paper presents an investigation into the application of natural fiber composite especially ramie fiber reinforced epoxy lamina composite for socket prosthesis. The research focuses on the tensile and shear strength from ramie fiber reinforced epoxy lamina composite which will be applied as alternative material for socket prosthesis. The research based on American Society for Testing Material (ASTM) standard D 3039/D 3039M for tensile strength and ASTM D 4255/D 4255M-83 for shear strength. The ramie fiber applied is a fiber continue 100 % Ne14'S with Epoxy Resin Bakelite …

Potency Of Thermoelectric Generator For Hybrid Vehicle, Nandy Putra, Raldi Artono Koestoer, Mohammad Adhitya, Ardian Roekettino, Bayu Trianto

Makara Journal of Technology

Potency of Thermoelectric Generator for Hybrid Vehicle. Thermoelectric Generator (TEG) has been known as electricity generation for many years. If the temperature difference occurred between two difference semi conductor materials, the current will flow in the material and produced difference voltage. This principle is known as Seebeck effect that is the opposite of Peltier effect Thermoelectric Cooling (TEC). This research was conducted to test the potential of electric source from twelve peltier modules. Then, these thermoelectric generators were applied in hybrid car by using waste heat from the combustion engine. The experiment has been conducted with variations of peltier module …

Effects Of Ph On Calcium Carbonate Precipitation Under Magnetic Field, Nelson Saksono, Yuliusman Yuliusman, Setijo Bismo, Roekmijati W. Soemantojo, Azwar Manaf

Makara Journal of Technology

Magnetic field effect on CaCO3 precipitation is the key parameter in evaluating the effectiveness of Anti-scale Magnetic Treatment (AMT). The purpose of this study was to investigate magnetic fields influence on CaCO3 precipitation in high and low super-saturated CaCO3 solution by varied pH CaCO3 solution using circulation flow fluid system. The observation results in the high super saturated solution (pH 8.5) showed the increase of precipited CaCO3 in magnetized solutions compared to those in non-magnetic solution during circulation process. In the low super-saturated CaCO3 solution (pH 6.4) it was found that magnetic treatment increased CaCO3 precipitation after circulation process. In …

Performance Of Hollow Fiber Membrane Gas-Liquid Contactors To Absorb Co2 Using Diethanolamine (Dea) As A Solvent, Sutrasno Kartohardjono, Pan Ade Nata, Eko Prasetio, Yuliusman Yuliusman

Makara Journal of Technology

This study uses DEA solution to absorb CO2 from the gas flow through the hollow fiber membrane contactors. This study aims to evaluate the performance of hollow fiber membrane contactors to absorb CO2 gas using DEA solution as solvent through mass transfer and hydrodynamics studies. The use of DEA solution is to reduce the mass transfer resistance in the liquid phase, and on the other side, the large contact area of the membrane surface can cover the disadvantage of membrane contactors; additional mass transfer resistance in the membrane phase. During experiments, CO2 feed flows through the fiber lumens, while the …

Intermetallic Cu3sn Phase Layer On Electrode’S Tip Of Galvanized Resistance Spot Welding, Muhammad Anis, Aulia Irsyadi, Deni Ferdian

Makara Journal of Technology

Intermetallic Cu3Sn Phase Layer on Electrode’s Tip of Galvanized Resistance Spot Welding. A resistance spot welding method is commonly used in automotive industries application. In a resistance spot welding method, the copper electrode has a significant role as an electric current carrier for joining thin metal sheet. This research was focused on studying the effect of tin layer at the electrode tip for joining galvanized steel sheet. The main variable of this research is in the thickness of the intermetallic Cu3Sn layer. The result showed that the introduction of tin layer less than 1 μm in thickness on the electrode …

Simple Ml Detector For Multiple Antennas Communication System, Ahmad Taqwa, Soegijardjo Soegijoko, Sugihartono Sugihartono, Suhartono Tjondronegoro

Makara Journal of Technology

Simple ML Detector for Multiple Antennas Communication System. In order to support providing broadband wireless communication services against limited and expensive frequency bandwidth, we have to develop a bandwidth efficient system. Therefore, in this paper we propose a closed-loop MIMO (Multiple-Input-Multiple-Output) system using ML (Maximum Likelihood) detector to optimize capacity and to increase system performance. What is especially exciting about the benefits offered by MIMO is that a high capacity and performance can be attained without additional frequency-spectral resource. The grand scenario of this concept is the attained advantages of transformation matrices having capability to allocate transmitted signals power suit …

Improved Predictive Power Control Of Cdma System In Rayleigh Fading Channel, Adit Kurniawan, Iskandar Iskandar, Sayid Machdar

Makara Journal of Technology

In this paper an improved prediction-based power control is proposed for code division multiple access (CDMA) systems in Rayleigh fading channel environments. One of the most serious problems which degrades the performance of power control algorithm is the effect of feedback delay. To overcome the effect of feedback delay, power control needs to employ prediction algorithm which utilises the correlation property of the past channel samples measurements to predict the future sample values. In CDMA power control, however, the correlation property of channel measurements is destroyed because the transmit power is continuously updated for each power control interval. The prediction …

On The Performance Of Svd-Dwt Based Digital Video Watermarking Technique With Semi-Blind Detector, Tarzan Basaruddin, Della Maulidiya

Makara Journal of Technology

On the Performance of SVD-DWT Based Digital Video Watermarking Technique with Semi-Blind Detector. This paper presents a watermarking technique for digital video. The proposed scheme is developed based on the work of Ganic and Chan which took the virtue of SVD and DWT. While the previous works of Chan has the blind detector property, our attempt is to develop a scheme with semi-blind detector, by using the merit of the DWT-SDV technique proposed by Ganic which was originally applied to still image. Overall, our experimental results show that our proposed scheme has a very good imperceptibility and is reasonably robust …

Lipid Production From Microalgae As A Promising Candidate For Biodiesel Production, Arief Widjaja

Makara Journal of Technology

Recently, several strains of microalgae have been studied as they contain high lipid content capable to be converted to biodiesel. Fresh water microalgae Chlorella vulgaris studied in this research was one of the proof as it contained high triacyl glyceride which made it a potential candidate for biodiesel production. Factors responsible for good growing of microalgae such as CO2 and nitrogen concentration were investigated. It was found that total lipid content was increased after exposing to media with not enough nitrogen concentration. However, under this nitrogen depletion media, the growth rate was very slow leading to lower lipid productivity. The …

Environmental Remediation Full-Scale Implementation: Back To Simple Microbial Massive Culture Approaches, Agung Dhamar Syakti, Mohamad Yani

Makara Journal of Technology

Using bioaugmentation and biostimulation approach for contaminated soil bioremediation were investigated and implemented on field scale. We combine those approaches by culturing massively the petrophilic indigenous microorganisms from chronically contaminated soil enriched by mixed manure. Through these methods, bioremediation performance revealed promising results in removing the petroleum hydrocarbons comparatively using metabolite by product such as biosurfactant, specific enzymes and other extra-cellular product which are considered as a difficult task and will impact on cost increase.

Preparation Of Radioactive Gold Nanoparticle By Neutron Activation, Rohadi Awaludin

Makara Journal of Technology

Preparation of Radioactive Gold Nanoparticle by Neutron Activation. It was reported that gold nanoparticle could be used for cancer therapy using thermal effect. It is possible to kill cancer cells using radiation of radioisotope. Study on preparation of radioactive gold by neutron activation at central irradiation position (CIP) of G.A. Siwabessy reactor with neutron flux 1.26 x 1014 neutron s-1cm-2 has been carried out. It was revealed that a radioisotop of gold (198Au) was produced by neutron activation from natural gold. Calculation results showed that 198Au with radioactivity of 0.366 Bq, 2.93 Bq, 9.90 Bq and 23.4 Bq was produced …

Implementation Of Web Cam As Motion Detector With Directshow Interfacing, Yonatan Santoso, Iwan Setiyawan, Victor N. Papilaya

Makara Journal of Technology

Implementation of Web Cam as Motion Detector with DirectShow Interfacing. One of many ways to take control a web cam is by using DirectShow which is integrated in DirectX. DirectShow acts like an API therefore it is easier to use. Afterwards, web cam will be implemented to detect object’s motion as well as camera surveillance. The method is by comparing a reference image with other image which is taken lately. If there are differences between those image it means motion has been detected.

Thermal Stability Of Clay's Galleries In Polypropylene - Clay (Montmorillonite) Nanocomposites Using Polypropylene-Gmaleic Anhydride As Compatibilizer, Sotya Astutiningsih, Pandu Lanang Kinasih, Arief Cahyo Wibowo

Makara Journal of Technology

Thermal Stability of Clay's Galleries in Polypropylene - Clay (montmorillonite) Nanocomposites using Polypropylene-g- Maleic Anhydride as Compatibilizer. Superior properties of food packaging can be achieved using nanocomposite technology. However, fabrication of this materials are complex and expensive. Long term objectives of this research is the synthesis of low cost polypropylene clay nanocomposites (PPCN) via a short-cut method known as ‘cascade engineering’. Cascade engineering principle in PPCN fabrication is performed by using compatibilizer (to enable the mixing of PP and clay) masterbatch, and PPCN in one pot process using melt mixer. This paper present the experimental results using small-angle x-ray diffraction …

Induction And Conduction Electromagnetic Waves Caused By Lightning Strike On The Low Voltage Network, Reynaldo Zoro

Makara Journal of Technology

Induction and Conduction Electromagnetic Waves Caused by Lightning Strike on the Low Voltage Network. Direct and indirect lightning strikes can disturb and induce low voltage overheadlines and it can produced overvoltage due to traveling waves along the lines. This overvoltage can damage the equipments connected to it. It was recorded that there were already a lot of damages of electronic equipments and arrestesr located inside the building of Lightning Measurement Station at Mnt. Tangkuban Perahu. Most of the overvoltage which was developed on the low voltage lines were coming from indirect lightning strike nearby due to the fact that most …

Muara Bekasi – Muara Tawar Offshore Transmission Pipeline Routing And Economic Analysis., Asep Handaya Saputra, Ardiansyah Ardiansyah

Makara Journal of Technology

Muara Bekasi – Muara Tawar Offshore Transmission Pipeline Routing and Economic Analysis. Power plant Muara Tawar will substitute the need of oil fuel to gas as form of economizing and energy conservation. The nearest supply point to fulfill natural gas needed on Muara Bekasi. So that Power Plant Company needed to develop gas pipeline infrastructure to joining the point.The purpose of this study is to create a system of gas transmission pipeline from gas supply point at Muara Bekasi to Power Plant Muara Tawar trough to offshore area. Design of gas transmission pipeline is started with technical data collection and …

An Investigation Of Students’ Conceptual Understanding In Related Sophomore To Graduate-Level Engineering And Mechanics Courses, Devlin Montfort, Shane Brown, David Pollock

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Interviews were conducted with students from a sophomore-level mechanics of materials class, a sophomore/junior-level structures class, a senior-level steel design class and a graduate-level advanced steel design class to investigate students’ conceptual understanding of bending and normal stress. The graduate students generally demonstrated higher computational skill and confidence but they were not significantly different from the sophomores in terms of conceptual understanding. Interestingly, the seniors showed markedly lower confidence in their ability to solve the problems posed in the interviews. Common difficulties include a conceptual definition of stress and reasoning involving the normal stresses developed under bending.

Assessing Repeatability Of Four-Point Bending Method For Estimating Fatigue Cracking Of Hot Mix Asphalt, Sara -. Montazeri

Open Access Theses & Dissertations

The objective of this thesis was to assess the repeatability of four-point bending method for estimating fatigue cracking of hot mix asphalt. This experimental research examined the influence of mix proportions, specifically asphalt and air void contents, on fatigue behavior of asphalt beam specimens in the laboratory tested with four-point bending method of loading. Following the relevant specifications, the strain-controlled mode of loading was selected. Fatigue failure is expected to occur at the cycle which the flexural stiffness of asphalt specimen reduced to 50% of initial amount. Up to a 1,000,000 cycles of loading were applied to each specimen.

Different …

Isolation Of Methyl Laurate From Coconut Oil As Raw Material For Fatty Alcohol Sulfate, Rita Arbianti, Tania Surya Utami, Astri Nugroho

Makara Journal of Technology

Isolation of Methyl Laurate from Coconut Oil as Raw Material for Fatty Alcohol Sulfate. Methyl laurate is a raw or base material for many industries, including surfactant industries. In this research, coconut oil (VCO) is transesterified with methanol to produce methyl ester, using NaOH as the catalyst. Methyl laurate is then separated by method based on the difference in melting point. This research focuses at determining the effects of some variables in transesterification on the concentration of produced methyl laurate. The variables are temperature (40 oC, 50 oC, 60 oC, 80 oC), time of transesterification reaction (0,5 hour, 1 hour, …

The Decompositioning Of Volatile-Matter Of Tanjung Enim Coal By Using Thermogravimetry Analyzer (Tga), Nukman Nukman

Makara Journal of Technology

The Decompositioning of Volatile-Matter of Tanjung Enim Coal by using Thermogravimetry Analyzer (TGA). Coal is a nature material which a kind of energy source. The decompotition of coal could analyze by heat treated using thermogravimetry analyzer. The decomposition of the volatile matter for three kinds of Tanjung Enim coal could be known. The value of activation energy that be found diference, then for Semi Anthracite, Bitumonius and Sub Bituminous Coal, the initial temperatures are 60.8 oC, 70.7 oC, 97.8oC, and the last temperatures are 893.8 oC, 832 oC, 584.6oC.

Phase Unwrapping Insar Image Using Local Energy Minimization Approach, Kusworo Adi, Tati L.R. Mengko, Andriyan B. Suksmono, Hendra Gunawan

Makara Journal of Technology

Phase Unwrapping InSAR Image Using Local Energy Minimization Approach. Reconstruction process of phase data from its cover is called Phase Unwrapping (PU). Ideally, without any noise phrase, singularity, and aliasing problems, the phase information can be unwrapped easily. However, in fact, the phase data actually always get noise disturbance and discontinuity. The PU process becomes more complicated and needs a better PU algorithm to address the problems properly. In this research, the local PU algorithm is developed using minimization of close related firstorder pixels energy approach. In this method, the energy difference between four close related pixels is counted, followed …

Two Element Microstrip Antenna Array With Defected Ground Structure, Fitri Yuli Zulkifli, Eko Tjipto Rahardjo, Muhamad Asvial, Djoko Hartanto

Makara Journal of Technology

Two Element Microstrip Antenna Array with Defected Ground Structure. This paper presents a two element microstrip antenna array using trapezium shape defected ground structure (DGS). The DGS is inserted in the ground plane between two elements of antenna array. Insertion of the DGS is intended to suppress the mutual coupling effect produced by antenna array. Simulation and measurement results were taken and compared between antenna array with and without DGS. Measurement results show that the antenna with DGS compared to antenna without DGS can suppress mutual coupling effect to 7.9 dB, improve the return loss to 33.29% from -30.188 dB …

Neutron Irradiation On Ss316 Material For Radioactive Endovascular Stent Production, Rohadi Awaludin, Abidin Abidin, Sriyono Sriyono

Makara Journal of Technology

Neutron Irradiation on SS316 Material for Radioactive Endovascular Stent Production. It was reported that restenosis could be prevented by radioactive endovascular stent. SS316 material of endovascular stent has been irradiated at pneumatic rabbit system of G.A. Siwabessy reactor for 5 minutes for producing radioactive stent by neutron activation. After 10 days of decay, the irradiated SS316 was measured by gamma spectrometer. The radioisotopes of 51Cr, 59Fe and 60Co were detected in the irradiated SS316 with radioactivity of 5990, 107 and 109 Bq/mg respectively. The Calculation results showed that radioisotopes of 51Cr, 59Fe and 55Fe were produced by neutron activation. The …

Physical Characteristics And Utilization Oft The Karst Beaches In Kabupaten Gunungkidul, Astrid Damayanti, Ranum Ayuningtyas

Makara Journal of Technology

Physical Characteristics and Utilization oft the Karst Beaches in Kabupaten Gunungkidul. Karsts beaches at Gunungkidul Regency (Baron, Kukup, Sepanjang, Drini, Krakal, Ngandong, and Sundak), located in south of Daerah Istimewa Yogyakarta Province, have economic potential. Even they have similarity in geological condition (genesis and morphological processes), but they have different physical characteristics. Based on result of observation environment on morphological conditions and spatial analysis method, we found the proper utilization of the beaches.

Hydrogen Absorption In Weldments Of Overlaid Claded Pressure Vessel, Ronnie Higuchi Rusli

Makara Journal of Technology

Cracks was found in type 347 stainless steel internal attachment welds of a reactor for a high temperature, and high pressure hydrogen service. One of the possible causes of cracking is low cycle fatigue cracking induced by repetition of thermal stress to embrittled weld metal. Type 347 weld metal loses its ductility by presence of sigma phase and hydrogen.

Spectral Response Surfaces And The Ringing Response Of Offshore Structures, I Ketut Suastika

Makara Journal of Technology

A method, called spectral response surface method, is proposed for the study of the ringing phenomenon of offshore structures. Newman’s results for diffraction force on a column were reformulated in terms of the frequency components of the ocean surface and their Hilbert transforms. Using a first-order reliability method together with a dynamic model for the structural response, it is straightforward to calculate the ocean surface history most likely to generate an extreme ringing response and the ringing response history.

A Collection Of New Studies Using Existing And Proposed Techniques And Instrumentation For Nondestructive Testing And Analysis Of Concrete Materials And Structures, Shane D. Boone

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A variety of studies were performed using existing and newly proposed techniques and instrumentation to further the understanding of nondestructive testing of concrete. A new combined stress wave propagation method was developed that combined the existing methods of the spectral analysis of surface waves, impact echo, and free-free resonant column experimental and analysis techniques. The method was used to determine the stiffness profile and location of embedded voids in a concrete tunnel lining modeled as a three layer concrete slab. A new equation was proposed that predicted the level of damage of concrete samples based on the functions of the …