Open Access. Powered by Scholars. Published by Universities.®
- Institution
-
- Universitas Indonesia (430)
- Louisiana State University (36)
- Purdue University (35)
- Missouri University of Science and Technology (29)
- Technological University Dublin (19)
-
- University of Arkansas, Fayetteville (18)
- University of South Florida (18)
- Old Dominion University (13)
- University of Nevada, Las Vegas (13)
- George Fox University (11)
- University of Dar es Salaam (9)
- University of Nebraska - Lincoln (8)
- California Polytechnic State University, San Luis Obispo (7)
- Changsha University of Science and Technology (6)
- Clemson University (6)
- University of Kentucky (6)
- Beirut Arab University (5)
- Michigan Technological University (5)
- American University in Cairo (4)
- The British University in Egypt (4)
- University of Texas at El Paso (4)
- West Virginia University (4)
- City University of New York (CUNY) (3)
- Louisiana Tech University (3)
- New Jersey Institute of Technology (3)
- Embry-Riddle Aeronautical University (2)
- Georgia Southern University (2)
- Southern Methodist University (2)
- University of Louisville (2)
- University of Malaya (2)
- Keyword
-
- Concrete (29)
- Sustainability (15)
- Durability (14)
- Corrosion (10)
- Cement (9)
-
- Fly ash (9)
- Ionic conductivity (9)
- Mechanical properties (8)
- Modeling (8)
- XRD (8)
- Applied sciences (7)
- Infrastructure (7)
- Optimization (7)
- Pavement (7)
- Rheology (7)
- Adsorption (6)
- Bridge (6)
- Earthquake (6)
- Fly Ash (6)
- Biodiesel (5)
- Geopolymers (5)
- Hydration (5)
- Reinforced concrete (5)
- UHPC (5)
- Activated carbon (4)
- CDMA (4)
- CO2 (4)
- Carbonation (4)
- Characterization (4)
- Composites (4)
- Publication Year
- Publication
-
- Makara Journal of Technology (429)
- Publications (19)
- USF Tampa Graduate Theses and Dissertations (18)
- Civil, Architectural and Environmental Engineering Faculty Research & Creative Works (17)
- Data (15)
-
- International Conference on Durability of Concrete Structures (14)
- Civil & Environmental Engineering Theses & Dissertations (13)
- Articles (12)
- UNLV Theses, Dissertations, Professional Papers, and Capstones (12)
- Faculty Publications - Biomedical, Mechanical, and Civil Engineering (11)
- Graduate Theses and Dissertations (10)
- Tanzania Journal of Engineering and Technology (TJET) (9)
- Doctoral Dissertations (8)
- Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research (7)
- Open Access Theses (7)
- The Summer Undergraduate Research Fellowship (SURF) Symposium (7)
- Civil Engineering Undergraduate Honors Theses (6)
- Journal of China & Foreign Highway (6)
- Master's Theses (6)
- BAU Journal - Science and Technology (5)
- Theses and Dissertations (5)
- Theses and Dissertations--Civil Engineering (5)
- Civil Engineering (4)
- Graduate Theses, Dissertations, and Problem Reports (ETD) (4)
- Open Access Theses & Dissertations (4)
- All Dissertations (3)
- All Theses (3)
- Conference papers (3)
- Dissertations (3)
- Dissertations, Master's Theses and Master's Reports - Open (3)
- Publication Type
- File Type
Articles 541 - 570 of 735
Full-Text Articles in Civil Engineering
Ergonomic Analysis Of Garment Industry Using Posture Evaluation Index (Pei) In Virtual Environment, Erlinda Muslim, Boy Nurtjahyo, Romadhani Ardi
Ergonomic Analysis Of Garment Industry Using Posture Evaluation Index (Pei) In Virtual Environment, Erlinda Muslim, Boy Nurtjahyo, Romadhani Ardi
Makara Journal of Technology
Ergonomic Analysis of Garment Industry using Posture Evaluation Index (PEI) in Virtual Environment. This research tried to study, in a virtual environment, the ergonomics of four divisions in garment industry: cutting division, sewing division, button division, and finishing division. Variables that influence the working conditions in each division are different; depend on the real situations that happened. The purpose is to assess the real working conditions based on ergonomics study using Posture Evaluation Index (PEI). PEI integrates the scores of low back analysis (LBA), ovako working posture (OWAS), and rapid upper limb assessment (RULA). Analysis phase was done using digital …
Formation Of Caco3 Particle And Conductivity Of Na2co3 And Cacl2 Solution Under Magnetic Field On Dynamic Fluid System, Nelson Saksono, Setijo Bismo, Roekmijati Widaningroem, Azwar Manaf
Formation Of Caco3 Particle And Conductivity Of Na2co3 And Cacl2 Solution Under Magnetic Field On Dynamic Fluid System, Nelson Saksono, Setijo Bismo, Roekmijati Widaningroem, Azwar Manaf
Makara Journal of Technology
Hard water causes the CaCO3 scale formation on the pipe walls and heat exchanger equipments in industrial or domestic water processes. A great number of experimental researches on the prevention of the CaCO3 precipitation process by magnetic field have been carried out. In this research, Na2CO3 and CaCl2 solutions was magnetized in the circulated flow condition (dynamic fluid system). The velocity of fluid and the circulation time was modified to examine its influences to the magnetization process. CaCO3 content was measured by titration method of EDTA complexometry. Conductivity test was conducted to find out hydrate ion bonding. The results showed …
Two-Class Classification With Various Characteristics Based On Kernel Principal Component Analysis And Support Vector Machines, Ivanna Kristianti Timotius, Iwan Setyawan, Andreas Ardian Febrianto
Two-Class Classification With Various Characteristics Based On Kernel Principal Component Analysis And Support Vector Machines, Ivanna Kristianti Timotius, Iwan Setyawan, Andreas Ardian Febrianto
Makara Journal of Technology
Two class pattern classification problems appeared in many applications. In some applications, the characteristic of the members in a class is dissimilar. This paper proposed a classification system for this problem. The proposed system was developed based on the combination of kernel principal component analysis (KPCA) and support vector machines (SVMs). This system has been implemented in a two class face recognition problem. The average of the classification rate in this face image classification is 82.5%.
Oxygen Diffusion Characterization Of Frp Composites Used In Concrete Repair And Rehabilitation, Chandra K. Khoe
Oxygen Diffusion Characterization Of Frp Composites Used In Concrete Repair And Rehabilitation, Chandra K. Khoe
USF Tampa Graduate Theses and Dissertations
Many independent studies have conclusively demonstrated that fiber reinforced polymers (FRP) slow down chloride-induced corrosion of steel in concrete. The mechanism for this slow down is not well understood but it has been hypothesized that FRP serves as a barrier to the ingress of chloride, moisture, and oxygen that sustain electrochemical corrosion of steel.
This dissertation presents results from an experimental study that determined the oxygen permeation rates of materials used in infrastructure repair. In the study, the oxygen permeation constants for epoxy, carbon and glass fiber laminates, concrete, epoxy-concrete and FRP-concrete systems were determined and a method developed to …
Wimax Implementation As Existing Hotspot Network Backhaul In Jakarta, Djamhari Sirat, Muhamad Asvial, Luther B. Marpaung
Wimax Implementation As Existing Hotspot Network Backhaul In Jakarta, Djamhari Sirat, Muhamad Asvial, Luther B. Marpaung
Makara Journal of Technology
WiMAX Implementation as Existing Hotspot Network Backhaul in Jakarta The development of Broadband Wireless Access (BWA), such as WiMAX, as a global standard for data transmission media has been used by high speed internet access provider. WiMAX application which supported by capabilities of interoperability, flexibility and commercial aspect make the internet services become more efficient, cheaper and easier to the customer. This phenomenon should be responded by ISPs. Based on technical and financial aspect in deciding the implementation of Wireless Network with WiMAX technology as a substitute, this research will observe and analyze the projection of WiMAX technology implementation as …
Plant Growth Modeling Using L-System Approach And Its Visualization, Atris Suyantohadi, Alfiyan Alfiyan, Mochamad Hariadi, Mauridhi Hery Purnomo
Plant Growth Modeling Using L-System Approach And Its Visualization, Atris Suyantohadi, Alfiyan Alfiyan, Mochamad Hariadi, Mauridhi Hery Purnomo
Makara Journal of Technology
The visualization of plant growth modeling using computer simulation has rarely been conducted with Lindenmayer System (L-System) approach. L-System generally has been used as framework for improving and designing realistic modeling on plant growth. It is one kind of tools for representing plant growth based on grammar sintax and mathematic formulation. This research aimed to design modeling and visualizing plant growth structure generated using L-System. The environment on modeling design used three dimension graphic on standart OpenGL format. The visualization on system design has been developed by some of L-System grammar, and the output graphic on three dimension reflected on …
Immobilization Of Saccharomyces Cerevisiae In Rice Hulls For Ethanol Production, Edita Martini, Dian Andriani, Sriramulu Gobikrishnan, Kyeong Eop Kang, Surn-Teh Bark, Changshin Sunwoo, Bambang Prasetya, Don-Hee Park
Immobilization Of Saccharomyces Cerevisiae In Rice Hulls For Ethanol Production, Edita Martini, Dian Andriani, Sriramulu Gobikrishnan, Kyeong Eop Kang, Surn-Teh Bark, Changshin Sunwoo, Bambang Prasetya, Don-Hee Park
Makara Journal of Technology
The whole cell immobilization in ethanol fermentation can be done by using natural carriers or through synthetic carriers. All of these methods have the same purpose of retaining high cell concentrations within a certain defined region of space which leads to higher ethanol productivity. Lignocellulosic plant substance represents one of highly potential sources in ethanol production. Some studies have found that cellulosic substances substances can also be used as a natural carrier in cell immobilization by re-circulating pre-culture medium into a reactor. In this experiment, rice hulls without any treatment were used to immobilize Saccharomyces cerevisiae through semi solid state …
Separation Study Of Titanomagnetite Fe3-Xtixo4 From Natural Sand At Indramayu, West Java, Sunaryo Sunaryo, Iwan Sugihartono
Separation Study Of Titanomagnetite Fe3-Xtixo4 From Natural Sand At Indramayu, West Java, Sunaryo Sunaryo, Iwan Sugihartono
Makara Journal of Technology
Separation Study of Titanomagnetite Fe3-xTixO4 from Natural Sand at Indramayu, West Java. Titanomagnetite FeTiO4 has been obtained from metal sand which is separated from natural sand at Indramayu using magnetic separator with the magnetic field 0,3 Tesla. This method can improve titanomagnetite content from 32% to 63,6%. According to X-ray diffractometer (XRD) and data processing by general structure analyses system (GSAS) with χ2= 1,454 and Wrp = 0,1142 as correction factor of the peak to peak intensities, we conclude that χ2 about 0 and Wrp aproximately 10%. It indicates the datas with the error merely 0,1 can be accepted. Furthermore, …
Hydrogen Absorption Induced Slow Crack Growth In Austenitic Stainless Steels For Petrochemical Pressure Vessel Industries, Ronnie Higuchi Rusli
Hydrogen Absorption Induced Slow Crack Growth In Austenitic Stainless Steels For Petrochemical Pressure Vessel Industries, Ronnie Higuchi Rusli
Makara Journal of Technology
Type 304L and type 309 austenitic stainless steels were tested either by exposed to gaseous hydrogen or undergoing polarized cathodic charging. Slow crack growth by straining was observed in type 304L, and the formation of α‘ martensite was indicated to be precursor for such cracking. Gross plastic deformation was observed at the tip of the notch, and a single crack grew slowly from this region in a direction approximately perpendicular to the tensile axis. Martensite formation is not a necessary condition for hydrogen embrittlement in the austenitic phase.
Simulation On The Use Of Losat Data For Rice Field Mapping, Bambang H. Trisasongko, Dyah R. Panuju, Boedi Tjahjono, Baba Barus, Hari Wijayanto, Mahmud A. Raimadoya, Irzaman Irzaman
Simulation On The Use Of Losat Data For Rice Field Mapping, Bambang H. Trisasongko, Dyah R. Panuju, Boedi Tjahjono, Baba Barus, Hari Wijayanto, Mahmud A. Raimadoya, Irzaman Irzaman
Makara Journal of Technology
Simulation on the Use of LOSAT Data for Rice Field Mapping. Since the launch of LAPAN-TUBSAT satellite in 2007, Indonesia has been developing mission on earth observation missions for various applications. The next generation mission, called LAPAN-ORARI Satellite (LOSAT), is currently under development and expected to be launched in 2011. In order to facilitate the applications, a thorough assessment of the sensor should be made. This paper presents an examination of simulated LOSAT data for rice monitoring and mapping purposes coupled with QUEST statistical tree. We found that three-band simulated LOSAT data were suitable for the task with reasonably high …
Development Of Technology Parameter Towards Shipbuilding Productivity Predictor Using Cubic Spline Approach, Bagiyo Suwasono, Sjarief Widjaja, Achmad Zubaydi, Zaed Yuliadi, I Nyoman Budiantara
Development Of Technology Parameter Towards Shipbuilding Productivity Predictor Using Cubic Spline Approach, Bagiyo Suwasono, Sjarief Widjaja, Achmad Zubaydi, Zaed Yuliadi, I Nyoman Budiantara
Makara Journal of Technology
Development of Technology Parameter Towards Shipbuilding Productivity Predictor Using Cubic Spline Approach. Ability of production processes associated with state-of-the-art technology, which allows the shipbuilding, is customized with modern equipment. It will give impact to level of productivity and competitiveness. This study proposes a nonparametric regression cubic spline approach with 1 knot, 2 knots, and 3 knots. The application programs Tibco Spotfire S+ showed that a cubic spline with 2 knots (4.25 and 4.50) gave the best result with the value of GCV = 56.21556, and R2 = 94.03%.Estimation result of cubic spline with 2 knots for the PT. Batamec shipyard …
Shaft Torsional Vibration Response Of Vertical Axis Ocean Current Turbine Model Due To Torque Excitation, Adi Wirawan Husodo, I Ketut Aria Pria Utama, I Made Ariana
Shaft Torsional Vibration Response Of Vertical Axis Ocean Current Turbine Model Due To Torque Excitation, Adi Wirawan Husodo, I Ketut Aria Pria Utama, I Made Ariana
Makara Journal of Technology
Shaft Torsional Vibration Response of Vertical Axis Ocean Current Turbine Model Due to Torque Excitation. The current research aimed to study the torsional vibration response of Vertical Axis Ocean Current Turbine due to randomly torque excitation pattern, owing to the variety of ocean current velocity. The turbine model is composed of 3 aluminum blades of NACA 0018 connected to steel shaft. Turbine dimensions are 10 cm of chord, 1.8 cm of chamber and 100 cm of span. The variation of ocean current velocity is 0.5 m/s, 1.0 m/s, 1.5 m/s, 2.0 m/s, 2.5 m/s and 3.0 m/s. The Model has …
Dye Sensitized Solar Cell With Conventionally Annealed And Post-Hydrothermally Treated Nanocrystalline Semiconductor Oxide Tio2 Derived From Sol-Gel Process, Akhmad Herman Yuwono, Badrul Munir, Alfian Ferdiansyah, Arif Rahman, Wulandari Handini
Dye Sensitized Solar Cell With Conventionally Annealed And Post-Hydrothermally Treated Nanocrystalline Semiconductor Oxide Tio2 Derived From Sol-Gel Process, Akhmad Herman Yuwono, Badrul Munir, Alfian Ferdiansyah, Arif Rahman, Wulandari Handini
Makara Journal of Technology
Dye-sensitized solar cell (DSSC) is one of the very promising alternative renewable energy sources to anticipate the declination in the fossil fuel reserves in the next few decades and to make use of the abundance of intensive sunlight energy in tropical countries like Indonesia. In the present study, TiO2 nanoparticles of different nanocrystallinity was synthesized via sol−gel process with various water to inorganic precursor ratio (Rw) of 0.85, 2.00 and 3.50 upon sol preparation, followed with subsequent drying, conventional annealing and post-hydrothermal treatments. The resulting nanoparticles were integrated into the DSSC prototype and sensitized with an organic dye made of …
An Empirical Model For Build-Up Of Sodium And Calcium Ions In Small Scale Reverse Osmosis, Subriyer Nasir
An Empirical Model For Build-Up Of Sodium And Calcium Ions In Small Scale Reverse Osmosis, Subriyer Nasir
Makara Journal of Technology
A simple models for predicting build-up of solute on membrane surface were formulated in this paper. The experiments were conducted with secondary effluent, groundwater and simulated feed water in small-scale of RO with capacity of 2000 L/d. Feed water used in the experiments contained varying concentrations of sodium, calcium, combined sodium and calcium. In order to study the effect of sodium and calcium ions on membrane performance, experiments with ground water and secondary effluent wastewater were also performed. Build-up of salts on the membrane surface was calculated by measuring concentrations of sodium and calcium ions in feed water permeate and …
The Effect Of Enzymatic Hydrolysis On The Properties Of Protein Hydrolysate From Paddy Mushroom, Niken Widya Palupi, Wiwik Siti Windrati, Tamtarini Tamtarini
The Effect Of Enzymatic Hydrolysis On The Properties Of Protein Hydrolysate From Paddy Mushroom, Niken Widya Palupi, Wiwik Siti Windrati, Tamtarini Tamtarini
Makara Journal of Technology
Protein hydrolysate was prepared from Paddy (Volvariella volvaceae) mushroom. Hydrolysis uses commercially protease available Protamex ™ with enzyme concentration of 0.1% (w/w). Hydrolysis was performed at three different temperatures (room temperature, 40 °C, and 50 °C) with different incubation periods (60, 90, and 120 minutes). Enzyme inactivation was done in 90 °C for 3 minutes. Yield and degree of hydrolysis ranged from 94.76% to 99.55% and 19.06% to 24.59%. Protein solubility was about 89–11,8%. The longer time of hydrolysis, the darker the color of protein hydrolysate. Protein hydrolysate which has hydrolysis at 50 °C for 120 minutes has the highest …
Effect Of Diafiltration On Preparation Of Fermented Mung Beans Concentrate As Probiotic Savory Flavor Through Ultrafiltration Membrane, Aspiyanto Aspiyanto, Agustine Susilowati
Effect Of Diafiltration On Preparation Of Fermented Mung Beans Concentrate As Probiotic Savory Flavor Through Ultrafiltration Membrane, Aspiyanto Aspiyanto, Agustine Susilowati
Makara Journal of Technology
Diafiltration by means of the ultrafiltration system of probiotic fermented Mung beans (Phaseolus radiatus L.) concentrate has been performed to reduce or eliminate salts and smaller impurities than the nominal cut-off of the membrane of 20,000 nominal weight cut-off (NWCO). These processes have been conducted as an attempt in order to get a probiotic product with organoleptic acceptability, composition, and the optimal total lactic acid bacteria (LAB) counts because the presence of salts will affect on the viability of LAB and the cell lysis of LAB and limit its utility in food products. Concentrate of probiotic mung beans was prepared …
Remote Sensing And Geographical Information System To Identify Drought Potency, Puguh Dwi Raharjo
Remote Sensing And Geographical Information System To Identify Drought Potency, Puguh Dwi Raharjo
Makara Journal of Technology
Remote Sensing and Geographical Information System to Identify Drought Potency. Kebumen regency was drought in year 2008, community clean water shortages and irrigation water following a decline in water resources. The use of remote sensing data and GIS can be used to identify the potential for drought-prone areas. Transformation of Landsat TM satellite imagery to obtain the brightness index, wetness index and vegetation index used to determine surface conditions in relation to drought. Brightness index and wetness index derived from the tasseled cap modifications, while the vegetation index derived from normalized difference vegetation index (NDVI) values. Other parameters such as …
High Pressure Adsorption Isotherm Of Co2 On Activated Carbon Using Volumetric Method, Awaludin Martin, Bambang Suryawan, Muhammad Idrus Alhamid, Nasruddin Nasruddin
High Pressure Adsorption Isotherm Of Co2 On Activated Carbon Using Volumetric Method, Awaludin Martin, Bambang Suryawan, Muhammad Idrus Alhamid, Nasruddin Nasruddin
Makara Journal of Technology
High Pressure Adsorption Isotherm of CO2 on Activated Carbon using Volumetric Method. Adsorption system is ones of the most effective methods for CO2 separating with other substances that produced from the burning of fossil fuels. In the design for that application, beside of characteristics of porous material (adsorbent) data, CO2 adsorption data on the adsorbent (kinetic and thermodynamic) are also needed. The aim of this research is resulting isothermal adsorption data at pressures up to 3.5 MPa by indirect methods (volumetric method) at isothermal temperature of 300, 308, 318 and 338 K. Adsorbent that used in this research is activated …
Concept Design And Testing Of Multi-Nozzle Water Mist Fire Suppression System, Danardono A. Sumarsono, Yulianto S. Nugroho, Mariance Mariance, I Gede Wahyu W. Ariasa
Concept Design And Testing Of Multi-Nozzle Water Mist Fire Suppression System, Danardono A. Sumarsono, Yulianto S. Nugroho, Mariance Mariance, I Gede Wahyu W. Ariasa
Makara Journal of Technology
In this work a flexible design of multi-nozzle arrangement of water mist fire suppression system was studied. The source of fire was a 65 mm diameter cooking oil fire. An investigation on the impact of nozzle arrangement on the temperature profile of fires was conducted. The occurance of oil splash due to the application of water mist was also studied. The water mist systems developed in the present work can effectively extinguish cooking oil fires and prevented them from re-ignition. The spray angle, discharge pressure, and water flow rate were important factors to determine the effectiveness of water mist in …
The Stability Characteristics Of Sandbag Submerged Breakwater, Ferry Fatnanta, Widi Agoes Pratikto, Haryo Dwito Armono, Wahyudi Citrosiswoyo
The Stability Characteristics Of Sandbag Submerged Breakwater, Ferry Fatnanta, Widi Agoes Pratikto, Haryo Dwito Armono, Wahyudi Citrosiswoyo
Makara Journal of Technology
The Stability Characteristics of Sandbag Submerged Breakwater. Breakwater is one of coastal structures to overcome problems of abrasion. Due to difficulties in obtaining rock material at the coastal area. The using of sandbags as a breakwater provides advantages in utilizing local materials. A Sandbag has a smooth surface, so the internal shear forces are relatively small. According to these phenomena, the research for parameters that are expected to affect the stability of the sand bags. These parameters are a slope, shape and formation of sand bags. This experimental research conducted in two dimensional physical model and took place on the …
Static Hand Gesture Recognition Of Indonesian Sign Language System Based On Backpropagation Neural Networks, Farida Asriani, Hesti Susilawati
Static Hand Gesture Recognition Of Indonesian Sign Language System Based On Backpropagation Neural Networks, Farida Asriani, Hesti Susilawati
Makara Journal of Technology
Static Hand Gesture Recognition of Indonesian Sign Language System Based on Backpropagation Neural Networks. The main objective of this research is to perform pattern recognition of static hand gesture in Indonesian sign language. Basically, pattern recognition of static hand gesture in the form of image had three phases include: 1) segmentation of the image that will be recognizable form of the hands and face, 2) feature extraction and 3) pattern classification. In this research, we used images data of 15 classes of words static. Segmentation is performed using HSV with a threshold filter based on skin color. Feature extraction performed …
Plain And Steel-Reinforced Concrete Shear Walls With And Without Cfrp Retrofitting, Ali Mohammed Salih Al Aloosi
Plain And Steel-Reinforced Concrete Shear Walls With And Without Cfrp Retrofitting, Ali Mohammed Salih Al Aloosi
Civil & Environmental Engineering Theses & Dissertations
This thesis presents the outcome- of a study of the behavior and strength of plain and steel-reinforced concrete shear walls with and without a window opening and Carbon Fiber-Reinforced Polymer (CFRP) retrofitting. A total of seven tests were conducted using six different shear walls. Each wall was subjected to a gradually increasing static load at one of it's top corners until the maximum load was reached. The load-deflection relations and the walls' failure patterns were observed and recorded. It was found that the window opening in the plain concrete wall reduced the wall load capacity by 18 percent. For the …
Performance Of Nevada’S Aggregates In Alkali-Aggregate Reactivity Of Portland Cement Concrete, Mohammad Shahidul Islam
Performance Of Nevada’S Aggregates In Alkali-Aggregate Reactivity Of Portland Cement Concrete, Mohammad Shahidul Islam
UNLV Theses, Dissertations, Professional Papers, and Capstones
Alkali-aggregate reaction (AAR) is a form of distress that occurs in concrete and results in serviceability problems, cracks, spalling, and other deterioration mechanisms. There are two categories of AAR, namely, alkali-silica reaction (ASR) and alkali-carbonate reaction (ACR). Alkali-silica reaction is one of the most recognized deleterious phenomena in concrete, and has been a major concern since its discovery in the 1940s. The reaction which occurs between reactive silica or silicates present in some aggregates and alkalis of Portland cement produces an alkali-silica gel that expands in the presence of moisture resulting in concrete cracks. ACR is also a chemical reaction …
A Simple Technique For Surface Area Determination Through Supercritical Co2 Adsorption, Mahmud Sudibandriyo
A Simple Technique For Surface Area Determination Through Supercritical Co2 Adsorption, Mahmud Sudibandriyo
Makara Journal of Technology
The measurement of specific surface area of porous materials has long been important in physical sciences and is currently growing in importance in applied and environmental science. Numerous systems have been developed for surface area measurement by gas adsorption. Commercial systems are available which can measure a wide range of absolute surface area with relative ease. However, their cost is often prohibitive. In this study, an inexpensive apparatus for surface area measurement has been set up to be used for measuring supercritical adsorption of CO2. The Ono-Kondo Lattice model was used to represent the adsorption isotherm and to determine the …
Fishing Catch And Catch Rate Assesment Of Mini Trawl, Trapnet And Setnet Fisheries, Muhammad Firdaus
Fishing Catch And Catch Rate Assesment Of Mini Trawl, Trapnet And Setnet Fisheries, Muhammad Firdaus
Makara Journal of Technology
Fishing Catch and Catch Rate Assesment of Mini Trawl, Trapnet and Setnet Fisheries. This paper is aimed at assessing fishing catch and catch rate of the dragged gear on shrimp, trapnet, and setnet fisheries in Tarakan. The catch and effort data (number and species) and the fishing time of captured units were used in this qualitative analysis of fishing catch and catch rate to describe catch composition and catch rate from three catch fishery units in Tarakan. The result of the research shows that in the catching operation the dragged gear on shrimp has two main catch targets, which are …
Ontology-Based Automatic Classification For News Articles In Indonesian Language, Prajna Wira Basnur, Dana Indra Sensuse
Ontology-Based Automatic Classification For News Articles In Indonesian Language, Prajna Wira Basnur, Dana Indra Sensuse
Makara Journal of Technology
Ontology-Based Automatic Classification for News Articles in Indonesian Language. Searching specific information will be difficult if relying only on query. Choosing less specific queries will result in a lot of irrelevant information fetched by the system. One of the most successful ways to overcome this problem is to perform document classification based on the topic. There are many methods that can be used to conduct such a classification, such as using statistical and machine learning approaches. However, those document classification methods require training the data or learning the documents. In this study, the authors attempted to classify documents using a …
Particle Filter With Binary Gaussian Weighting And Support Vector Machine For Human Pose Interpretation, Indah Agustien, Muhammad Rahmat Widyanto, Sukmawati Nur Endah, Tarzan Basaruddin
Particle Filter With Binary Gaussian Weighting And Support Vector Machine For Human Pose Interpretation, Indah Agustien, Muhammad Rahmat Widyanto, Sukmawati Nur Endah, Tarzan Basaruddin
Makara Journal of Technology
This paper proposes human pose interpretation using particle filter (PF) with Binary Gaussian Weighting and support vector machine (SVM). In the proposed system, particle filter is used to track a human object, then this human object is skeletonized using thinning algorithm and classified using SVM. The classification is to identify human pose, whether it is normal or abnormal behavior. Here particle filter is modified through weight calculation using Gaussian distribution to reduce the computational time. The modified particle filter consists of four main phases. First, particles are generated to predict target’s location. Second, the weight of certain particles is calculated …
Maintenance Activity Planning By Reability Centered Maintenance Ii Method, Rachmad Hidayat, Nachnul Ansori, Ali Imron
Maintenance Activity Planning By Reability Centered Maintenance Ii Method, Rachmad Hidayat, Nachnul Ansori, Ali Imron
Makara Journal of Technology
Maintenance Activity Planning by Reability Centered Maintenance II Method. This research discusses maintenance activity planning using the RCM II method to evaluate failure function risk on compresor screw. The calculation of maintenance time is performed by considering maintenance and repair costs. The risk evaluation result with RPN shows that the critical component that needs to get the main priority in applying maintenance on compresor screw is function disorder on timeworn piston and on the broken outgoing air sponge’s filter that receives RPN 45. The optimum maintenance time calculation is applied on components that undergo scheduled restoration and scheduled discard task …
Software Design Of Mobile Antenna For Auto Satellite Tracking Using Modem Correction And Elevation Azimuth Method, Djamhari Sirat, Muhamad Asvial, Arman Djohan Diponegoro, Himawan Sidharta
Software Design Of Mobile Antenna For Auto Satellite Tracking Using Modem Correction And Elevation Azimuth Method, Djamhari Sirat, Muhamad Asvial, Arman Djohan Diponegoro, Himawan Sidharta
Makara Journal of Technology
Software Design of Mobile Antenna for Auto Satellite Tracking Using Modem Correction and Elevation Azimuth Method. Pointing accuracy is important in satellite communication. Because the satellite’s distance to the surface of the earth's satellite is so huge, 1 degree of pointing error will make the antenna unable to send data to satellites. To overcome this, the auto-tracking satellite controller is made. This system uses a microcontroller as the controller, with the GPS as the location indicator of the antenna, a digital compass as the beginning of antenna pointing direction, a rotary encoder as azimuth and elevation censor, and a modem …
Petroleum Degradation In Soil By Thermophilic Bacteria With Biopile Reactor, Astri Nugroho, Edison Effendi, Yulius Karonta
Petroleum Degradation In Soil By Thermophilic Bacteria With Biopile Reactor, Astri Nugroho, Edison Effendi, Yulius Karonta
Makara Journal of Technology
Crude oil degradation has been carried out using biopile reactor in total petroleum hydrocarbon (TPH) concentration of 5%, 10% and 15%. The thermophilic microorganisms used from isolation result and identification are Aeromonas salmonicida, Bacillus pantothenticus, and Stenotrophomonas maltophilia. The biodegradation of biopile reactor is done by various concentrations of TPH, total plate count (TPC), and volatile suspended solid (VSS) per day for 30 days. The biodegradation of kinetic parameter calculated consists of μ, μm, Y, Yt, Yobs, Kd, Ks from TPH concentration decision, and TPC and VSS in every microorganism with t (observation time) of 0 hour to 168 hours. …