Civil Engineering Commons^™

Bs News November/December

Building Services Engineering

No abstract provided.

Bs News September/October

Building Services Engineering

No abstract provided.

Network- Level Pavement Performance And Management Study In Connecticut, Ramandeep S. Josen

Master's Theses

This thesis presents the analysis of asphalt pavement cracking data on the network level in Connecticut. Pavement performance indicators including longitudinal and transverse cracking as well as roughness are investigated with respect to numerous distinct factors that can be grouped into three categories, i.e. climatic-, pavement structure-, and traffic-related. High-quality climatic data was obtained from the national weather stations in Connecticut. Maintenance and construction data was used to determine the pavement age and structure amongst several other factors. Traffic data was acquired from the state records and accumulated traffic loading was estimated for all segments based on their age. High …

Investigating The Bond Of Prestressing Strands In Lightweight Self-Consolidating Concrete, Royce Woodrow Floyd

Graduate Theses and Dissertations

Lightweight self-consolidating concrete (LWSCC) is a relatively recent advancement in concrete technology. The reduced dead load from lightweight concrete is beneficial for precast elements and for elements where dead load is a significant portion of the total load, such as prestressed bridge girders. Self-consolidating concrete (SCC) is a specially proportioned concrete mixture that consolidates under its own weight without the need for vibration. The combination of lightweight concrete and self-consolidating behavior provides the benefits of both. Bond of prestressing steel has been a much debated topic since the 1950s. Limited data are available on the transfer and development length of …

L&D Manual Turn Lane Storage Validation/Update, Deogratias Eustace, Sowjanya Ponnada

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Queuing occurs at intersections mostly due to overflow or inadequacy of turn bays. The ODOT L&D Manual Volume 1 has storage requirements for both signalized and unsignalized intersections. Figures 401-9E and 401-10E of the L&D Manual provide the required turn lane storage lengths which should be compared with the real world conditions to check for adequacy of these lengths as a measure of ensuring that accesses to the left turn lanes are not blocked. In addition to the projected turn lane volume, ODOT’s methodology incorporates both deceleration (based on the speed of the roadway) and potential blockage from the adjacent …

Use Of Building Information Modelling In Responding To Low Carbon Construction Innovations: An Irish Perspective., Barry Mcauley, Alan V. Hore, Roger West

Conference papers

At present the Irish construction industry is facing one of its most uncertain and challenging periods and will see major cuts in all areas of the economy in 2012. Despite this, Ireland pushes forward in sustainability initiatives with the Government ruling that environmentally-friendly policies are to get priority in competing for State contracts worth up to €16 billion a year. This and further initiatives are in place, so as to reduce greenhouse gas emissions by up to 20% by the year 2020.By the end of 2018 the public sector must own or rent only buildings with high energy-saving standards and …

Implementing Building Information Modeling In Public Works Projects In Ireland, Barry Mcauley, Alan V. Hore, Roger West

Conference papers

The Irish State in recent years has suffered huge financial losses in the public works sector, which has now pushed the Irish Government to explore new ways of controlling cost. This background lead to the introduction of the Capital Works Management Framework in 2007 which aimed to support the certainty of outcome in terms of cost and quality, as well as improved risk management, through the implementation of fixed price contracts. In order to successfully compete within this framework it is recommended by the authors, that Irish Government moves towards the legal mandating of BIM. This can ensure a greater …

Laboratory Performance Of Highway Bridge Girder Anchorages Under Simulated Hurricane-Induced Wave Loading, Jora Lehrman, Christopher Higgins, Daniel Cox

TREC Final Reports

Many bridges along the Gulf Coast of the United States were damaged by recent hurricanes, and many more are susceptible to similar damage. This research examines the structural performance of common connection details used to anchor prestressed concrete girders to the substructure. Full-scale specimens were fabricated and tested under static and dynamic cyclic load histories. Dynamic load histories were developed from previously conducted hydraulic tests of a 1/5 scale model of a highway bridge under hurricane wave loads. The load effects considered included the pseudo-statically applied vertical uplift force, horizontal force, combined horizontal and vertical forces, and dynamically applied combined …

Bs News July/August

Building Services Engineering

No abstract provided.

Efficient Precast/Prestressed Floor System For Building Construction, Eliya E. A. Henin

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Precast floor systems provide a rapidly constructed solution to multi-story buildings that is economical, high quality, fire-resistant, and with excellent deflection and vibration characteristics. Conventional precast concrete floor system cannot compete with cast-in-place post tensioning flat slab floor systems when high span-to-depth ratio and flat soffit are required. This is due to the significant depth of standard precast beams, and use of column corbels and beam ledges. This research presents the development of a new precast concrete floor system that eliminates the limitations of conventional precast floor system and provides a competitive precast alternative to cast-in-place flat slab floor systems. …

Framework Development For Construction Safety Visualization, Kishor Shrestha

UNLV Theses, Dissertations, Professional Papers, and Capstones

Throughout the history of the construction industry, many fatalities and injuries have occurred in construction sites. One of the major causes of accidents is unsafe site conditions; basically, this is due to inadequate supervision. To improve upon the traditional supervision approach, this study proposes a `Framework Development for Construction Safety Visualization' approach. In addition to this, a computer vision Edge Detection Algorithm was developed and tested to convert construction site still images into edges of the objects in the images. The framework development of this study uses computer vision, robot vision, image compression, pattern recognition, internet transmission, network communication, and …

Legal Issues In Green Construction, Namrata Shrestha

UNLV Theses, Dissertations, Professional Papers, and Capstones

The most recent "green construction movement", made a significant impact on the design and construction industry in the United States. Organizations such as the American Institute of Architects (AIA) have lobbied governmental entities to provide financial incentives to promote green construction. The green construction community also promotes the notion that a healthier working and living environment is achieved. Due to finical incentives coupled with projected long-term energy cost savings, many owners of new construction are considering green construction as an option. Accompanying the "green construction movement", new kinds of legal issues, particularly relating to green aspects such as certification, energy …

Bs News May/June

Building Services Engineering

No abstract provided.

Smart Home Prototype, Logistics & Planning, David G. Guzman^, Virgilio Gonzalez*

COURI Symposium Abstracts, Spring 2012

No abstract provided.

Bs News March/April

Building Services Engineering

No abstract provided.

Bridge Deck Cracking Investigation And Repair, Vidal Velez Vargas

UNF Graduate Theses and Dissertations

The focus of this study is to investigate the cracking of concrete bridge decks and the sealants used in repairing transverse cracks. Cracking could occur in both hardened mature concrete and early age concrete. Several factors affect concrete cracking, such as age-dependent material properties, thermal- and moisture-related stresses and strains, material viscoelastic behavior, restraints, concrete expansion and contraction, casting sequence, formwork, material characteristics, and environmental exposure. The causes of early age cracking are primarily attributed to effects such as plastic shrinkage, temperature effects, autogenous shrinkage, and drying shrinkage. This deck cracking could greatly reduce durability, lead to a loss of …

Pvc Stay-In-Place Panel Covers For Tilt-Up And Pre-Cast Construction, Purdue Ect Team

ECT Fact Sheets Archive

Octaform™ stay-in-place concrete forming system is PVC insulated concrete form system. These forms have been used in the industry for various applications to improve the insulation and corrosion resistance of structures. Octaform™ has developed the panel covers so the advantages of PVC stay-in-place concrete forming systems could be applied to tilt-up and pre-cast construction.

Conx Chassis System, Purdue Ect Team

ECT Fact Sheets Archive

Often referred to as a full-scale “Erector Set”, the ConX System applies technology to the building industry resulting in dramatic efficiencies. The systems approach is made possible by employing automated and efficient processes, from design through fabrication, shipping, and field assembly.

Nightbreeze™: Integrated Heating, Ventilation And Cooling System, Purdue Ect Team

ECT Fact Sheets Archive

NightBreeze™ provides ventilation cooling automatically, eliminating the necessity of operating windows. NightBreeze™ uses the heating/air conditioning system fan to bring in filtered outside air and flush out warm, stale indoor air. The system also allows you to select the lowest temperature you want the house to reach overnight.

Cmic Xprojects, Purdue Ect Team

ECT Fact Sheets Archive

xProjects is a cloud based collaboration and project management solution that resolves the interoperability issues associated with integrated project delivery (IPD) and electrifies the IPD process by enabling capital project owners to collaborate seamlessly with multiple project stakeholders. Using XML adapters to create connections between systems, CMiC Real Time Integration (RTI) tags data so it can be transferred bi-directionally between participants within the project ecosystem with no loss of information or the need for re-entry.

Autodesk Buzzsaw®, Purdue Ect Team

ECT Fact Sheets Archive

Autodesk® Buzzsaw® is a software solution enabling the successful execution of construction projects through a central database, collaboration and communication with access control. The software has capacities of exchanging and viewing drawings, schedule reminders and specifications. Users can directly comment on AutoCAD drawings with the date of comment and name of commenter displayed.

Bidtool.Net: An Integrated Web-Based Approach For Commercial Bid Data Management And Networking, Purdue Ect Team

ECT Fact Sheets Archive

BidTool is basically a web-based portal that allows the distribution and transfer of key commercial construction project data. Owners, architects, designers, engineers, estimators, contractors, material suppliers & construction professionals find track and manage everything from architectural plans specifications and renderings to action items and scheduling requirements such as bid due dates, pre bid meetings and bid results.

Contour Crafting, Purdue Ect Team

ECT Fact Sheets Archive

Victims of disasters such as floods, earthquakes and war have to seek shelter elsewhere. A need arises to rapidly construct houses on site and at minimal cost. This will eliminate the need to transport pre-fabricated shelters long distances, saving the time and costs associated with transportation. Since Contour Crafting is an automated process, labor needs are highly minimized allowing relief workers to allocate their time and effort to rebuilding local infrastructure such as water sanitation and distribution systems, roads, electrical and communication systems as well as irrigations systems.

Super Flex Wall - New Frame System For High Rise Buildings, Purdue Ect Team

ECT Fact Sheets Archive

The "Super Flex Wall" is a structural frame method newly developed by the Takenaka Corporation, used in combination with a core wall (the earthquake-resistant reinforced concrete wall penetrating through the center of the building from the lower part to the top floor) and a structural control method or with a base-isolation method. Part of the structure is cantilevered from the central core along the periphery of the building.

Carbon Frp Grid Structures For Use In Reinforcing Concrete, Purdue Ect Team

ECT Fact Sheets Archive

Carbon FRP Grids are structural reinforcement materials that improve the performance of concrete structures such as insulated wall panels, architectural panels, double tee parking garage tee beams, concrete countertops and other products. The carbon grids can be used in place of welded wire mesh in most structures and is imbedded the same way as a welded wire mesh.

Conx Space Frame System, Purdue Ect Team

ECT Fact Sheets Archive

Off-site manufacture is one of the key initiatives being used by contractors to achieve these goals. Sandwich Plate System (SPS) Floors deliver a compelling off-site solution for structural floors. Their composite steel panels provide a similar performance to concrete floors at one quarter the weight, 10 - 15% shorter project schedules and broader benefits such as reduced complexity and the elimination of the majority of wet-work above ground level.

Shear & Torsion Behaviour Of Hollow-Core Pre-Stressed Concrete Slabs, Cian Twomey

Theses

Research Aim The aim of this study is to carry out research on shear and torsion behaviour of hollow-core slabs.

Research Objectives The objectives of the research are: • carry out a review of research literature published to date • carry out physical laboratory testing • generate and calibrate Unite element models • expand finite element models to model shear and torsion behaviour of hollow- core slabs • carry out a comparison and discussion of the findings

Bs News January/February

Building Services Engineering

No abstract provided.

The Repair Of Laterally Damaged Concrete Bridge Girders Using Carbon Fiber Reinforcing Polymers (Cfrp), Matthew Kent Graeff

UNF Graduate Theses and Dissertations

In recent years the use of carbon fiber reinforcing polymers (CFRP) to repair damaged structural components has become more accepted and practiced. However, the current reference for designing FRP systems to repair and strengthen reinforced concrete (RC) and prestressed concrete (PSC) girders has limitations. Similarly, very few resources address solutions for the debonding problem associated with CFRP laminates or the use of CFRP laminates to repair structural members with pre-existing damage. The included experimental program consists of testing both RC and PSC girders with simulated lateral damage and CFRP repairs. A total of 34 RC beams were statically tested under …

Utilizing Technology To Increase The Recycled Content Of Asphalt Mix Designs, Nicholas Ricketts

Purdue Polytechnic Masters Theses

This directed project examined the idea that increasing the amount of recycled asphalt product in road construction will result in a comparable performance to the current levels of recycled asphalt product in today’s pavement. A critical review of literature is structured in four areas: describing the need (financial and environmental) for the increased use of recycled materials, describing how others have addressed the issue and technology needed for increasing the use of recycled content, describing how some contractors have created the technology needed, and finally describing the direction needed in order to encourage customers and government agencies to embrace the …