Civil Engineering Commons^™

Daylighting And Thermo-Electrical Performance Of An Autonomous Suspended Particle Device Evacuated Glazing, Aritra Ghosh

Doctoral

Suspended particle device (SPD) glazing is an AC powered switchable glazing. PV powered SPD evacuated (vacuum) glazing was proposed with the potential of reducing the heating demand, cooling demand and artificial lighting demand of a building. To achieve an autonomous SPD vacuum glazing, semi empirical simulation and outdoor characterisation was explored in this thesis. Transmission of SPD glazing (area 0.058 m2) varied from 5% when opaque to 55% when transparent in the presence of 110 V, 0.07 W AC supply was characterised in outdoor test cell in Dublin. The SPD glazing has variable spectral transmission in the presence of variable …

Case Studies Of Cavity And External Wall Insulation Retrofitted Under The Irish Home Energy Saving Scheme: Technical Analysis And Occupant Perspectives, Aimee Byrne, Gerard Byrne, Garrett O'Donnell, Anthony Robinson

Articles

The residential sector represents 27% of primary energy consumption in Ireland. This paper examines the case study of the Irish government’s national grant scheme to encourage energy efficiency retrofit in private housing. That is the Home Energy Saving (HES) Scheme, later rebranded the Better Energy: Homes (BEH) Scheme. The methodology involved monitoring several homes immediately before and after retrofit alongside discussions with occupants. The examination focused on specific measures commonly introduced through the HES/BEH programme − cavity and external wall insulation. It has been found that a significant decrease in heat loss through the walls was measured in all cases. …

A Sustainability-Based Project Selection Algorithm: Socio-Technical-Economic Project Selection (Steps) Algorithm, Bharathi Bhattu

Dissertations, Master's Theses and Master's Reports

Multi-dimensional aspects play a vital role in the task of project-decision making. Environmental effects are to be considered in addition to other technical and non-technical aspects in order to avoid undue environmental damage. This current work introduces a new decision-making algorithm (Socio-Technical-Economic Project Selection or STEPS) that is demonstrated with the use of RCA (recycled concrete aggregate) as riprap for slope stabilization and erosion control which leaches chemical arsenic when in contact with water. Arsenic has long been recognized for its lethal properties. The main intention of introducing this new algorithm is to use sustainability concepts of social, technical, and …

Thermal Envelope Analysis Of Local Authority Low Rise Housing Based On Stock Aggregation Theory Using A Remote Feature Extraction Technique., James Pittam

Theses

Understanding the buildings thermal envelope is paramount to analysing existing problems which facilitate cold bridging and low surface temperatures. As no detailed housing stock database is in existence in Ireland which describes the geometrical configuration of the existing housing stock, and to create one would be a major challenge, this research set out to develop a high speed remote cataloguing and geometrical data extraction methodology to build such a database. Replacing traditional measurement methods with a remote method allows for the rapid extraction of fagade information. A remote surveying process is proposed named, the Virtual Survey Method, for the classification …

Expedient Airfield Runway Repair Using Folded Fiberglass Mat, Christopher Y. Tuan, Willaim C. Dass

Department of Civil and Environmental Engineering: Faculty Publications

For expedient airfield runway repair, the US Air Force has developed a folded fiberglass mat to cover craters repaired with a well-compacted granular base material. The objective of this study was to evaluate the adequacy of using polymer plugs to anchor the mat to a repaired asphalt pavement for heavy aircraft operations. The effort consisted of materials testing, field experiments and analytical modeling. An 89,800-kg (198,000-pound) load cart having the footprint of a single C-5 main gear was pulled on a mat with wheels locked to simulate full braking forces. Anchor bushings were instrumented to measure anchor loads. A simplified …

Bs News January/February

Building Services Engineering

No abstract provided.

Comparative Analysis Of Buckling-Restrained Braced Frames In Eccentric Configuration (Brbf-Es) And Eccentrically Braced Frames (Ebfs), Peter T. Vayda

Civil Engineering Undergraduate Honors Theses

Continuing on the findings of “Using Buckling-Restrained Braced Frames in Eccentric Configuration,” by Dr. Gary S. Prinz, P.E., which determined that, from a performance standpoint, BRBF-Es could be a viable alternative for EBFs. A comparative analysis was conducted on the design procedures and initial cost estimates of BRBF-Es and EBFs. Upon designing four 12-Story buildings (two BRBF-Es and two EBFs), it was determined that BRBF-Es were easier to design due to the statically determinant system. The initial costs estimates of BRBF-Es; however, ranged upwards of 30% more cost than EBFs. Therefore, the initial investment of more intensive structural engineering design …

Bs News November/December

Building Services Engineering

No abstract provided.

A Semantics-Based Approach To Construction Cost Estimating, Mehrdad Niknam

Dissertations (1934 -)

A construction project requires collaboration of different organizations such as owner, designer, contractor, and resource suppliers. These organizations need to exchange information to improve their teamwork. Understanding the information created in other organizations requires specialized human resources. Construction cost estimating is one of the processes that requires information collected from several sources including a building information model (BIM) created by designers, estimating assembly and work item information maintained by contractors, and construction resource cost information provided by resource suppliers. Currently, it is not easy for computers to integrate the information for construction cost estimating over the Internet. This study discusses …

Bs News September/October

Building Services Engineering

No abstract provided.

Comparisons Of Linear Regression Models For Properties Of Alkaliactivated Binder Concrete, Arkamitra Kar, Udaya B. Halabe, Indrajit Ray, Avinash Unnikrishnan

Civil and Environmental Engineering Faculty Publications and Presentations

Concrete with alkali-activated binder (AAB) is increasingly considered as a better alternative to conventional portland cement (PC) concrete due to its superior sustainable and green properties. In order to promote the practical usage of AAB concrete, a previous study by the present authors proposed models on correlations among their mechanical and nondestructive properties. The present study extends the previous knowledge by proposing new improved models using linear regressions to predict compressive strengths and modulus of elasticity from ultrasonic pulse velocities. The models are developed for both unstressed and stressed AAB concrete with different curing temperatures. The accuracies of the models …

Vertical Icf Wall System, Purdue Ect Team

ECT Fact Sheets Archive

Traditional ICF systems’ installation is tedious and labor intensive resulting in out of level, bowing, and snaking walls with a significant amount of bracing adding to the cost. ICF (Insulated Concrete Form) walls are a form of structural walls used for construction. Hobbs Vertical ICF system uses less concrete, more recycled material and requires less labor for construction. The furring assemblies and retainer clips of the Hobbs VICF system are made from 100% recycled post-industrial waste.

Prefabricated Building, Purdue Ect Team

ECT Fact Sheets Archive

With the continuous demand for construction of new buildings, an easier, more sustainable, energy-efficient and environmentally friendly building method is necessary to save time, energy and cost. Hence, there has been an increasing need for a system such as BROAD sustainable building (BSB). A form of prefabricated building by BROAD Sustainable Building Co., LTD (BSB). It consists of flooring and ceiling, embedded shafts of ventilation, water supply & drainage, electricity and lighting. Other items include pillars, diagonal bracings, doors, windows, walls and sanitary wares, air conditioning, air quality products, lifts, building thermal insulations.

Post-Tensioned Concrete Shear Wall, Purdue Ect Team

ECT Fact Sheets Archive

The post-tension concrete shear wall by Tipping Mar will replace the conventional concrete shear wall in earthquake prone areas in many instances, depending on the height and scale of the building.

Rapid Drying Concrete, Purdue Ect Team

ECT Fact Sheets Archive

One of the essential problems that are faced during construction is the drying of concrete and the presence of moisture which affects floor coverings that need to be placed. The rapid-drying characteristic in Aridusâ concrete allows for the quick reduction of moisture vapor that travels through the concrete pores of the concrete.

Ap Alternatives Modular Solar Racking, Purdue Ect Team

ECT Fact Sheets Archive

Solar panels have been used to generate and supply electricity in various applications such as residential and commercial buildings. Therefore, a need for a quicker approach to installation as well as the need to reduce workmanship to speed up the process is needed. Solar racks are developed through the use of automated equipment to “preassemble the racking hardware, pre-install the solar modules, and drive helical anchors into the ground rapidly”. So instead of installing one panel at a time, AP Alternatives has created a new method that uses machines to make the process easier. This new automation of the installation …

3d Printing For Bricks, Purdue Ect Team

ECT Fact Sheets Archive

Building Bytes, by Brian Peters, is a project that uses desktop 3D printers to print bricks for architecture. Instead of using an expensive custom-made printer, it uses a normal standard 3D printer which is available for everyone and makes it more accessible and also easier for fabrication.

Influence Of Warping On Stress For Restrained Concrete Slabs: For Application To Crcp, Corey M. Beck, W. Jason Weiss, Nathan T. Todd

The Summer Undergraduate Research Fellowship (SURF) Symposium

Continuously-reinforced concrete pavement (CRCP) is widely used in transportation system because of its low maintenance requirement. However, the need for large volumes of steel creates a high cost for new construction. The Illinois Tollway is preparing to substantially renovate highways in and around Chicago and this work seeks to understand how concretes of varying mixture designs can be made thinner by reducing the amount of built-in stress. The experiment examines warping in beams subjected to various degrees of restraint, in an effort to assess effectiveness at reducing warping in continuously reinforced concrete pavements. Value added methodologies such as internal curing …

Bs News July/August

Building Services Engineering

No abstract provided.

Criticality And Risk Assessment For Pipe Rehabilitation In The City Of Santa Barbara Sewer System, Rossi Carmelo Rossi Ii

Master's Theses

Aging sewer infrastructure is posing greater and greater risk to the health and well-being of City residents. Issues can range from pipe blockages in sewer laterals to Sanitary Sewer Overflows. This thesis develops a risk analysis method that can be used by municipalities to maintain and rehabilitate sewer assets. Risk combines the effect of Likelihood of Failure (LOF) and Consequence of Failure (COF) to perform a complete two-dimensional analysis that allows for relative comparison between different pipes in the system. The LOF rating has been equated to pipe integrity while the COF rating was related to the environmental, economic, and …

A Microscopic Simulation Approach To Performance Evaluation Of Intelligent Transportation System Corridors: A Case In Michigan, Matthew Levi Clark

Masters Theses

A cost and benefit evaluation of the Michigan Department of Transportation’s (MDOT) Intelligent Transportation Systems (ITS) is performed through integration of analytical techniques and microscopic traffic microsimulation. Observed freeway corridor incident logs and characteristics are studied to determine representative incident management patterns on choice study corridors. The Quadstone Paramics microsimulation traffic package is used to model the selected corridors during various analysis scenarios and investigate the effects of ITS on freeway incident management performance.

Bs News May/June

Building Services Engineering

No abstract provided.

State Of Accelerated Bridge Construction (Abc) In The United States, Mike Ofili

Honors College Theses

The purpose of this project is to develop a toolkit for the design and construction of bridges using prefabricated materials primarily to reduce the closure time and on-site construction time of newly constructed bridges or bridges undergoing renovation. The research focuses specifically on short span bridges in Georgia (40,60,80, and 120ft spans).

Areas of primary concern for this project were design, constructability, structural analysis, the use of concrete and steel girders, cost efficiency, and industry surveys. In this particular portion of the study, the surveys proved to be most effective when combined with information obtained existing research as well as …

Improving Energy Efficiency And Environmental Sustainability Of Commercial Insulation, Celine F. Manoosingh, James Mihelcic, Manjriker Gunaratne

Civil Engineering & Construction: Faculty Publications

With increasingly stringent energy standards set in place by the Department of Energy, energy efficiency is becoming a paramount concern to manufacturers of appliances. Additionally, the production and disposal of the voluminous amount of polyurethane foam commonly utilized as insulation in refrigeration units poses a significant environmental challenge. In this context, this study investigated an alternative insulation for use in commercial refrigerator/freezer units. A prototype exploring the use of evacuated packets of pyrogenic silica substituting for conventional insulation was assessed. Assessment criteria included experimental comparison of heat transfer characteristics and the energy efficiency of the new insulation as well as …

Simplified Pavement Design For Lpas: Introduction To Pavexpress, Dudley Bonte

Purdue Road School

Simplified Pavement Design for LPA's; An introduction to and use of PaveXpress, a simplified, free, web-based pavement design scoping tool for roadway and parking lot pavements. The system was developed by Pavia Systems in partnership with the National Asphalt Pavement Association. PaveXpress creates technical sound pavement structural designs for flexible and rigid pavements based on widely accepted industry standards from the Association of State Highway Officials (AASHTO). The simplified pavement design system is based on empirical equation from the 1993 AASHTO Guide for the Design of Pavement Structures. PaveXpress is intended for use by local agencies, engineers and consultants …

Bs News March/April

Building Services Engineering

No abstract provided.

Structural Properties Of Concrete Materials Containing Roadcem, Niall Holmes

Articles

This paper presents findings from a preliminary study to assess the structural and material properties of a nonstandard, concrete type mix containing RoadCem, a traditional soil stabilising additive. Two different mixes determined the effect of adding RoadCem in terms of compressive and flexural strengths, breaking strain, thermal expansion and contraction behaviour, permeability using a falling head, and Young’s modulus. RoadCem is a fine powder containing alkali metals and synthetic zeolites which are complemented with a complex activator. RoadCem modifies the dynamics and chemistry of cement hydration by enhancing the crystallisation process and forming longer needle crystalline structures. It reduces the …

Lateral Torsional Buckling Response In Glass Fiber Reinforced Polymer Composite Beams And Comparison With Ansys Modeling & Design Equations, Santosh Vangala

Graduate Theses, Dissertations, and Problem Reports (ETD)

Glass fiber reinforced polymer (GFRP) composites have the potential to replace the existing conventional materials in Civil Engineering like steel and concrete. Such potential can be attributed to the numerous advantages GFRP composites have over conventional materials. Some of the advantages are: high strength-to-weight ratio, corrosion resistance, low life cycle cost and maintenance, nonmagnetic and electronic transparency. As the application of GFRP is on the rise, the need for developing accurate design equations for these materials has been imperative. The GFRP composites are manufactured through pultrusion and although they have numerous advantages they are less stiff than similar profiles made …

Bs News January/February

Building Services Engineering

No abstract provided.

First Steps In Developing Cement-Based Batteries To Power Cathodic Protection Of Embedded Steel In Concrete, Niall Holmes, Aimee Byrne, Brian Norton

Articles

This paper presents the first steps in developing innovative cement-based batteries to power cathodic protection in reinforced concrete structures. Initial electrical outputs of 1.55V and 23mA have been found to be sufficient to polarise prescribed corrosion currents of 20mA per m2 of embedded steel. Cathodic protection is a well-developed and powerful technique to limit the effects of steel reinforcement corrosion. However, as it requires an electrical supply day and night, it is often powered by non-environmentally friendly diesel generators or connected to the electrical grid. This paper focuses on increasing the ionic conductivity of the solution in the cement pores, …