Civil and Environmental Engineering Commons^™

Water Resources Systems Analysis - University Of Texas San Antonio, Marcio Giacomoni

All ECSTATIC Materials

Systems Analysis methods use algorithmic and mathematical approaches for problem-solving. These are powerful methods that can be applied to solve complex design and management problems for water resources systems and other engineering areas. This class will focus on optimization methods, such as linear programming, integer programming, nonlinear programming, genetic algorithms, and dynamic programming, and their application to water resources systems. Advanced Systems Analysis methods, including sensitivity analysis, alternatives generation, and multi-objective optimization will be introduced to address the complexities associated with public sector decision-making. Course taught at University of Texas San Antonio.

Environmental Systems Analysis - Hong Kong University Of Science And Technology, Hong Kong, Ng Tze Ling

All ECSTATIC Materials

Undergraduate course in environmental systems analysis offered at Hong Kong University of Science and Technology, Hong Kong in Fall 2015.

Water Resources Systems Analysis - Colorado State University, Darrell Fontane

All ECSTATIC Materials

Applications of systems analysis, simulation and optimization techniques in water resources planning and management. Course taught at Colorado State University.

Energy And Exergy Analysis Of Kalina Cycle For The Utilization Of Waste Heat In Brine Water For Indonesian Geothermal Field, Nasruddin Nasruddin, Agus Noor Sidiq, Abdulmajeed Mohamad, Rama Usvika

Makara Journal of Technology

The utilization of waste heat in a power plant system—which would otherwise be released back to the environment—in order to produce additional power increases the efficiency of the system itself. The purpose of this study is to present an energy and exergy analysis of Kalina Cycle System (KCS) 11, which is proposed to be utilized to generate additional electric power from the waste heat contained in geothermal brine water available in the Lahendong Geothermal power plant site in North Sulawesi, Indonesia. A modeling application on energy and exergy system is used to study the design of thermal system which uses …

Optimal Pavement Design And Rehabilitation Planning Using A Mechanistic-Empirical Approach, Yun Bai, Osman Erman Gungor, Jaime Alberto Hernandez-Urrea, Yanfeng Ouyang, Imad L. Al-Qadi

Civil and Environmental Engineering Faculty Research and Publications

This paper presents the development of a pavement design and rehabilitation optimization decision-making framework based on Mechanistic-Empirical (ME) roughness transfer models. The AASHTOWare Pavement ME Design (the software of Pavement ME Design) is used to estimate pavement deterioration based on the combined effects of permanent deformation, fatigue, and thermal cracking. The optimization problem is first formulated into a mixed-integer nonlinear programming model to address the predominant trade-off between agency and user costs. To deal with the complexity associated with the pavement roughness transfer functions in the software and to use the roughness values as input to the optimization framework, a …

Determination Of Explosive Energy Partition Values In Rock Blasting Through Small-Scale Testing, Joshua Calnan

Theses and Dissertations--Mining Engineering

Blasting is a critical part of most mining operations. The primary function of blasting is to fragment and move rock. For decades, attempts have been made at increasing the efficiency of blasting to reduce costs and increase production. Most of these attempts involve trial and error techniques that focus on changing a single output. These techniques are costly and time consuming and it has been shown that as one output is optimized other outputs move away from their optimum level. To truly optimize a blasting program, the transfer of explosive energy into individual components must be quantified. Explosive energy is …

Make Or Buy Analysis Model Based On Tolerance Design To Minimize Manufacturing Cost And Quality Loss, Cucuk Nur Rosyidi, Reza Rizkichani Akbar, Wakhid Ahmad Jauhari

Makara Journal of Technology

In a manufacturing company, manufacturing costs, or component prices, and tolerance will affect the price and the quality of a product. Companies must produce high-quality products with low manufacturing costs in order to keep their products competitive in the market; however, it is difficult to produce a high-quality product with a low manufacturing cost. Companies have difficulties in determining the components to be produced using their own manufacturing facilities (make) or outsourced to their suppliers (buy). Hence, a make or buy analysis is needed to minimize the manufacturing costs and quality loss and to determine the optimum alternative regarding make …

An Integral Framework For Sustainable Building Design, Bushra Asfari

Masters Theses

Selection of materials for building design is a delicate process hinged of a number of factors which can be cost or environmental related, depending on the objectives of the design. This process becomes more difficult when designers are faced with several material options for each building component. This thesis presents the design and development of a framework that enables designers understand the trade-off between cost and environmental related factors when selecting materials for building design. The framework is based on the integration of Autodesk Revit, Microsoft access, and modeling modified Harmony search multi-objective optimization tool adapted to account for material …

Optimization Of Vehicle Routing And Scheduling With Travel Time Variability - Application In Winter Road Maintenance, Haifeng Yu

Dissertations

This study developed a mathematical model for optimizing vehicle routing and scheduling, which can be used to collect travel time information, and also to perform winter road maintenance operations (e.g., salting, plowing). The objective of this research was to minimize the total vehicle travel time to complete a given set of service tasks, subject to resource constraints (e.g., truck capacity, fleet size) and operational constraints (e.g., service time windows, service time limit).

The nature of the problem is to design vehicle routes and schedules to perform the required service on predetermined road segments, which can be interpreted as an arc …

Stormwater Infrastructure Optimization On Conjunctive Improvements, Mohammad Hussin Shar

Civil & Environmental Engineering Theses & Dissertations

The studied drainage system is located in the downtown of the City of Newport News, in a basin known as Anderson Park. The drainage system collects and conveys rainfall runoffs to the system outfall located at the shoreline of the Hampton Roads body of water, which is located south of the study area. The aim of this study is to analyze the area's drainage system, determine maximum capacities, identify system deficiencies and generate the most possible, practical and economical solution for fixing the system deficiencies.

After collecting all of required data, the drainage system was modeled and calibrated using the …

Economic Growth Assumptions In Climate And Energy Policy, Nir Y. Krakauer

Publications and Research

The assumption that the economic growth seen in recent decades will continue has dominated the discussion of future greenhouse gas emissions and the mitigation of and adaptation to climate change. Given that long-term economic growth is uncertain, the impacts of a wide range of growth trajectories should be considered. In particular, slower economic growth would imply that future generations will be relatively less able to invest in emissions controls or adapt to the detrimental impacts of climate change. Taking into consideration the possibility of economic slowdown therefore heightens the urgency of reducing greenhouse gas emissions now by moving to renewable …

Structural Analysis And Optimization Of Skyscrapers Connected With Skybridges And Atria, Amy Jean Taylor Mccall

Theses and Dissertations

Skybridges and atria between buildings are becoming more and more popular. Most current skybridge connections are either roller or rigid-connections. This dissertation presents an investigation of the structural analysis and optimization of skyscraper systems with hinge-connected skybridges, and compares the results to skyscraper systems with roller-connected skybridges and to skyscraper systems without skybridges altogether. Also presented is an investigation of the structural analysis and optimization of skyscrapers both with and without atria between the buildings. It was assumed that the atria envelope was constructed with cushions made from lightweight, transparent, and flexible Ethylene Tetrafluoroethylene (ETFE). A simplified skyscraper skybridge model …

Cost And Embodied Energy Optimization Of Rectangular Reinforced Concrete Beams, Alexander Kosloski

All Theses

Concrete has a large environmental footprint so it is desirable to find ways to efficiently design structural members. Engineers can exercise their abilities early on in the design phase of construction projects to reduce the environmental footprint by minimizing the amount of materials required. One way to achieve these results is to optimize the design of structural concrete. In this study, simple-span rectangular reinforced concrete (RC) beams with a range of different bending moments were analyzed. The primary goal was to combine life cycle analysis (LCA), numerical optimization, and reinforced concrete mechanics to create a framework for designing efficient RC …

Predictive Maturity Of Inexact And Uncertain Strongly Coupled Numerical Models, Ismail Farajpour

All Dissertations

The Computer simulations are commonly used to predict the response of complex systems in many branches of engineering and science. These computer simulations involve the theoretical foundation, numerical modeling and supporting experimental data, all of which contain their associated errors. Furthermore, real-world problems are generally complex in nature, in which each phenomenon is described by the respective constituent models representing different physics and/or scales. The interactions between such constituents are typically complex in nature, such that the outputs of a particular constituent may be the inputs for one or more constituents. Thus, the natural question then arises concerning the validity …

Optimization Of Porous Pavement Mixtures Based On Aggregate Structure, Andrew Neptune

All Dissertations

Porous pavements are sustainable features that are used to help manage the quantity and quality of stormwater runoff. These pavements may include porous asphalt, permeable interlocking concrete pavers and pervious concrete. Since pavements that are purposefully designed to drain water through their matrix are relatively new, contractors and engineers are faced with various challenges such as improper design and installation, poor workability, and excessive finishing which may lead to clogged pores. Therefore, this study on porous pavements examined pervious concrete mixtures to evaluate an optimization process for the preparation of porous pavement mixtures based on aggregate structure to meet desired …

Environmental Systems Modeling And Management - University Of Virginia, Charlottesville, Teresa Culver

All ECSTATIC Materials

Grad/Undergrad course in environmental systems modeling and management offered at University of Virginia, Charlottesville in Fall 2013.

Deterministic Optimization And Design - University Of California, Davis, Jay R. Lund

All ECSTATIC Materials

Undergraduate course in deterministic optimization and design offered at U.C. Davis.

Reliability-Based Design Optimization Of Concrete Flexural Members Reinforced With Ductile Frp Bars, Bashar Behnam, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

In recent years, ductile hybrid FRP (DHFRP) bars have been developed for use as tensile reinforcement. However, initial material costs regain high, and it is difficult to simultaneously meet strength, stiffness, ductility, and reliability demands. In this study, a reliability-based design optimization (RBDO) is conducted to determine minimum cost DHFRP bar configurations while enforcing essential constraints. Applications for bridge decks and building beams are considered, with 2, 3, and 4-material bars. It was found that optimal bar configuration has little variation for the different applications, and that overall optimized bar cost decreased as the number of bar materials increased.

Accuracy Of A Simplified Analysis Model For Modern Skyscrapers, Jacob Scott Lee

Theses and Dissertations

A new simplified skyscraper analysis model (SSAM) was developed and implemented in a spreadsheet to be used for preliminary skyscraper design and teaching purposes. The SSAM predicts linear and nonlinear response to gravity, wind, and seismic loading of "modern" skyscrapers which involve a core, megacolumns, outrigger trusses, belt trusses, and diagonals. The SSAM may be classified as a discrete method that constructs a reduced system stiffness matrix involving selected degrees of freedom (DOF's). The steps in the SSAM consist of: 1) determination of megacolumn areas, 2) construction of stiffness matrix, 3) calculation of lateral forces and displacements, and 4) calculation …

A Real-Time Crane Service Scheduling Decision Support System (Css-Dss) For Construction Tower Cranes, Amir Tork

Electronic Theses and Dissertations

The success of construction projects depends on proper use of construction equipment and machinery to a great extent. Thus, appropriate planning and control of the activities that rely on construction equipment could have significant effects on improving the efficiency of project operations. Cranes are the largest and most conspicuous construction equipment, widely used in typical construction sites. They play a major role in relocation of materials in horizontal and vertical directions on construction sites. Given the nature of activities relying on construction cranes in various stages of a project, cranes normally have control over the critical path of the project …

Assessment, Optimization, And Enhancement Of Ultrafiltration (Uf) Membrane Processes In Potable Water Treatment, Christopher Boyd

Electronic Theses and Dissertations

This dissertation reports on research related to ultrafiltration (UF) membranes in drinking water applications. A pilot-scale investigation identified seasonal surface water quality impacts on UF performance and resulted in the development of a dynamic chemically enhanced backwash protocol for fouling management. Subsequent analysis of UF process data revealed limitations with the use of specific flux, transmembrane pressure (TMP), and other normalization techniques for assessing UF process fouling. A new TMP balance approach is presented that identifies the pressure contribution of membrane fouling and structural changes, enables direct process performance comparisons at different operating fluxes, and distinguishes between physically and chemically …

Optimization Of Stress Wave-Based Nondestructive Methods In Identifying Deterioration In Concrete Structures, Hoda Azari

Open Access Theses & Dissertations

The transportation infrastructure across the United States is deteriorating and requires periodic inspection to predict the cost of repair and extent of maintenance activities, to remedy structural problems, and to ensure safety and serviceability. The use of nondestructive testing (NDT) methods in detecting and characterizing flaws in the infrastructure has become more common. Among different NDT methods, the stress wave-based methods, including ultrasonic surface waves (USW) and impact echo (IE) methods, are widely used to maintain concrete structures. In this dissertation, a complete literature review of seismic wave theory and wave propagation in plate like structures, and stress wave-based methods …

Transferability Of Jarvis-Type Models Developed And Re-Parameterized For Maize To Estimate Stomatal Resistance Of Soybean: Analyses On Model Calibration, Validation, Performance, Sensitivity, And Elasticity, Denis Mutiibwa, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

In a previous study by the same authors, a new modified Jarvis model (NMJ-model) was developed, calibrated, and validated to estimate stomatal resistance (rs) for maize canopy on an hourly time step. The NMJ-model’s unique subfunctions, different from the original Jarvis model (J-model), include a photosynthetic photon flux density

(PPFD)-r_s response subfunction developed from field measurements and a new physical term, Aexp(1/LAI), where A is the minimum stomatal resistance and LAI is the green leaf area index, to account for the influence of canopy development on r_s, especially during partial canopy stage in the early season and …

Environmental Implications Of Pavements: A Life Cycle View, Bin Yu

USF Tampa Graduate Theses and Dissertations

Environmental aspect of pavement, unlike its economic counterpart, is seldom considered in the theoretical study and field practices. As a highly energy and material intensive infrastructure, pavement has great potential to contribute to the environment protection, which, in root, depends on the in-depth understanding of the environmental impacts, holistically and specifically. A life cycle assessment (LCA) model is used to fulfill the goal.

This research firstly carried out extensive literature review of LCA studies on pavement to identify the major research gaps, including: incompleteness of the methodology, controversy of the functional unit, and unawareness of feedstock energy of asphalt, etc. …

Ammonia Measurements And Emissions From A California Dairy Using Point And Remote Sensors, Kori D. Moore, E. Young, C. Gurell, Michael D. Wojcik, Randy S. Martin, G. E. Bingham, R. L. Pfeiffer, J. H. Prueger, J. L. Hatfield

Civil and Environmental Engineering Faculty Publications

Ammonia (NH3) is an important trace gas species in the atmosphere that can have negative impacts on human, animal, and ecosystem health. Agriculture has been identified as the largest source of NH3, specifically livestock operations. NH3 emissions from a commercial dairy in California were investigated during June 2008. Cattle were held in open-lot pens, except for young calves in hutches with shelters. Solid manure was stored in the open-lot pens. Liquid manure from feed lanes was passed through a solids settling basin and stored in a holding pond. Passive sensors and open-path Fourier transform infrared spectrometers (OP-FTIR) were deployed around …

An Efficient Genetic Algorithm For The Design Optimization Of Cold-Formed Steel Portal Frame Buildings, Duoc T. Phan, James B. P. Lim, Tiku T. Tanyimboh, Wei Sha

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The design optimization of cold-formed steel portal frame buildings is considered in this paper. The real-coded genetic algorithm (GA) optimizer proposed considers both building’s topology (i.e. frame spacing and pitch) and cross-sectional sizes of the main structural members as the decision variables that are optimized. Previous GAs in the literature were characterized by poor convergence including slow progress that usually results in excessive computation times and/or frequent failure to achieve an optimal or near-optimal solution. This is the main issue addressed in this paper. In an effort to improve the performance of the conventional GA, a niching strategy is presented …

Advanced Design Optimization Of Cold-Formed Steel Portal Frame Buildings, Duoc T. Phan, James B. P. Lim, Tiku T. Tanyimboh, Wei Sha

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The design optimization of cold-formed steel portal frame buildings is considered in this paper. The objective function is based on the cost of the members for the main frame and secondary members (i.e., purlins, girts, and cladding for walls and roofs) per unit area on the plan of the building. A realcoded niching genetic algorithm is used to minimize the cost of the frame and secondary members that are designed on the basis of ultimate limit state. It is shown that the proposed algorithm shows effective and robust capacity in generating the optimal solution, owing to the population’s diversity being …

Optimization Models And Algorithms For Truckload Relay Network Design, Hector Andres Vergara Arteaga

Graduate Theses and Dissertations

Driver turnover is a significant problem for full truckload (TL) carriers that operate using point-to-point (PtP) dispatching. The low quality of life of drivers due to the long periods of time they spend away from home is usually identified as one of the main reasons for the high turnover. In contrast, driver turnover is not as significant for less-than-truckload (LTL) carriers that use hub-and-spoke transportation networks which allow drivers to return home more frequently. Based on the differences between TL and LTL, the use of a relay network (RN) has been proposed as an alternative dispatching method for TL transportation …

Optimizing Fermentation Medium To Produce Cyclosporin A Using Response Surface Methodology, Rofiq Sunaryanto

Makara Journal of Technology

Response surface methodology (RSM) is a three factorial model which illustrates the relationship between one or more independent variables. RSM can be used to optimize the fermentation medium for the production of Cyclosporin A from the isolate Tolypocladium inflatum. The optimal point of the response surface area is predicted by using a seconddegree polynomial model and applying the statistic model obtained from the central composite design (CCD). The results of optimizing the fermentation medium for Cyclopsorin using the three independent variables of glucose, casein, and KH2PO4 show that all three of the independent variables affect the production of Cyclosporin A. …

Optimizing Reservoir-Stream-Aquifer Interactions For Conjunctive Use And Hydropower Production, Hala Fayad, Richard C. Peralta, Ali Forghani

Civil and Environmental Engineering Faculty Publications

Conjunctive management of water resources involves coordinating use of surface water and groundwater resources. Very few simulation/optimization (S-O) models for stream-aquifer system management have included detailed interactions between groundwater, streams, and reservoir storage. This paper presents an S-O model doing that via artificial neural network simulators and genetic algorithm optimizer for multiobjective conjunctive water use problems. The model simultaneously addresses all significant flows including reservoir-stream-diversion-aquifer interactions in a more detailed manner than previous models. The model simultaneously maximizes total water provided and hydropower production. A penalty function implicitly poses constraints on state variables. The model effectively finds feasible optimal solutions …