Civil and Environmental Engineering Commons^™

A Case-Crossover Study Of Laceration Injuries In Pork Processing, Lina Lander, Gary Sorock, Terry L. Stentz, Lynette Smith, Murray Mittleman, Melissa J. Perry

Department of Construction Engineering and Management: Faculty Publications

Objectives— The authors estimated the associations between transient risk factors and laceration injuries in workers at two meatpacking plants in the Midwest.

Methods— The case-crossover design was used to collect within-subject transient work task and personal-level exposure information. RRs of laceration injuries were estimated by comparing exposures during the ‘hazard’ period (just before the laceration injury) with exposures in the ‘control’ period (the previous workweek). Stratified analyses were utilized to estimate the effects of gender, ethnicity, training and the number of adjacent coworkers on each transient risk factor.

Results— The authors interviewed 295 meatpacking workers with laceration injuries (mean age …

Reliability And Effect Of Partially Restrained Wood Shear Walls, John Joseph Gruber

Wayne State University Dissertations

ABSTRACT

RELIABILITY AND EFFECT OF PARTIALLY RESTRAINED WOOD SHEAR WALLS

by

JOHN J. GRUBER

MARCH 2012

Advisor: Dr. Gongkang Fu

Major: Civil Engineering

Degree: Doctor or Philosophy

The prescriptive design of the most widely used residential building code in the United States, the IRC, allows the use of partially restrained wood shear walls to resist wind and seismic loads. Wind load is the most common controlling lateral design load for these structures. In contrast, the complimenting building code, the IBC, requires either a restraining dead load or a mechanical hold down device to resist overturning. To prescribe a safe structure, …

P96. Three-Dimensional Morphometry Of Human Cervical Endplates, Rebecca A. Wachs, Victoria M. Michna, Eric H. Ledet

Department of Agricultural and Biological Systems Engineering: Faculty Publications

BACKGROUND CONTEXT: Degeneration of the cervical intervertebral disc is the underlying cause for many patients suffering from neck and upper extremity pain. Anterior cervical discectomy and fusion, and cervical disc replacements are common, but next generation implants and less invasive surgical techniques are predicated on a comprehensive characterization of cervical endplate morphology. To date, cervical endplate morphometry has not been described in detail, and age-related and gender- dependent differences have not been characterized.

PURPOSE: The purposes of this research were to measure cervical endplate morphometry in both men and women across three decades of life and characterize age, gender, and …

Field Performance Evaluation Of A Ventilation System: A Swine Case Study, Jay D. Harmon, Michael C. Brumm, Larry D. Jacobson, Stephen H. Pohl, David R. Stender, Richard R. Stowell

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Swine finishing facility ventilation has become relatively complex and is often mismanaged as a system. One of the few ways to truly understand these systems is to spend time systematically going through the many components of the building and how they work as a system. To learn to help producers better, a team of university Extension specialists that included agricultural engineers and animal scientists spent an extended period carefully documenting conditions in a deep‐pit swine finishing building with two 1,000‐head rooms. Exhaust fans connected to the manure pit and wall fans were operated at various stages as a negative‐pressure ventilation …

Portable Bridge Wim Data Collection Strategy For Secondary Roads, Bernard Enright, Cathal Leahy, Eugene J. Obrien, Jennifer Keenahan

Conference papers

A common method of collecting traffic loading data across a large road network is to use a network of permanent pavement-based WIM systems. An alternative is to use one or more portable Bridge Weigh-In-Motion systems which are moved periodically between bridges on the network. To make optimum use of such a system, a suitable data collection strategy is needed to choose locations for the system. This paper describes a number of possible strategies which the authors have investigated for the National Roads Authority in Ireland. The different strategies are examined and their advantages and disadvantages compared. Their effectiveness at detecting …

Microstructural And Mineralogical Transformation Of Hydraulically Disposed Fly Ash—Implications To The Environment, Jabulani S. Mahlaba, Elsabe P. Kearsley, Richard A. Kruger

Coal Combustion and Gasification Products Journal Archive

Increasing amounts of coal are combusted annually to meet the ever-increasing energy demands. The inevitable by-products include fly ash and saline effluents, which require acceptable disposal. The aim of this article is to compare the effect of hydraulic disposal with dry ash dumping. The results indicate that the former carries more environmental benefits based on the physical, chemical, and mineralogical aspects that were investigated.

Computational Benchmarks In Simulation Of Cyclic Performance Of Steel Connections Using Three Dimensional Nonlinear Finite Element Method, Ali Abolmaali, Mohammad Razavi, Roozbeh Kiamanesh

Civil Engineering Faculty Publications - Archive

The presented manuscript is intended to introduce accurate computational benchmarks to predict the hysteresis behavior of beam-column steel connections by means of a 3D non-linear finite element analysis. In this study, element type, inelastic material behavior, bolts pre-tensioning, and contact properties between different components of connections are discussed. Incremental nonlinear analysis takes into account all three types of nonlinearities including material, geometry, and contact properties in predicting moment-rotation hysteresis loops. A series of full-scale structural tests are performed to validate the results obtained from the finite element analyses. This study shows that cost efficient numerical analysis simulation is capable of …

Monte Carlo Simulation Of Extreme Traffic Loading On Short And Medium Span Bridges, Bernard Enright, Eugene J. Obrien

Articles

The accurate estimation of site-specific lifetime extreme traffic load effects is an important element in the cost-effective assessment of bridges. A common approach is to use statistical distributions derived from weigh-in-motion measurements as the basis for Monte Carlo simulation of traffic loading. However, results are highly sensitive to the assumptions made, not just with regard to vehicle weights but also to axle configurations and gaps between vehicles. This paper presents a comprehensive model for Monte Carlo simulation of bridge loading for free-flowing traffic, and shows how the model matches results from measurements on five European highways. The model has been …

Shake Table Testing Of A Utility-Scale Wind Turbine, Ian Prowell, Chia Ming Uang, Ahmed Elgamal, J. Enrique Luco, Lanhui Guo

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Shake table tests were undertaken on a full-scale wind turbine (65-kW rated power, 22.6-m hub height, and 16-m rotor diameter) using the Network for Earthquake Engineering Simulation Large High Performance Outdoor Shake Table at the University of California, San Diego. Structural response characteristics and modal parameters are presented for base shaking imparted in two configurations, both parallel (configuration 1) and perpendicular (configuration 2) to the axis of rotation of the rotor. Results are summarized for a series of progressively stronger motions imparted in configuration 1, with analysis identifying damage sources leading to an overall loss in stiffness. Two sources of …

Cordyline Fruticosa Growth And Soil Microbial Quality With Topical Application Of Coal Combustion By-Products Aggregates, Sangchul Hwang, Isomar Latorre, Eileen Irizarry

Coal Combustion and Gasification Products Journal Archive

Coal combustion by-products aggregates (CCAs) are a solidified composite of fly and bottom ashes (2:1, by wt). Here, we assessed the feasibility of beneficial use of CCAs as a soil amendment or conditioner by conducting an outdoor experiment with Cordyline fruticosa (lucky plant) to determine its growth and soil microbial quality under the influence of topical CCA application (95 tons ha21). Enhanced growth of C. fruticosa with CCA application was noted, with respect to plant height, growth rate, leaf size, and leaf chlorophyll intensity. Soil dehydrogenase activity and total heterotrophic bacteria count were greater with topical CCA application, especially in …

Influence Of Activator Solution Formulation On Fresh And Hardened Properties Of Low-Calcium Fly Ash Geopolymer Concrete, Carlos Montes, Erez N. Allouche

Coal Combustion and Gasification Products Journal Archive

The effect of the composition of activator solutions on fresh and hardened properties of geopolymer concrete was investigated. Research variables included liquid sodium silicate product (DH, NH, and StarH), sodium hydroxide molar concentration (6, 10, and 14), and sodium silicate–to–sodium hydroxide ratio (1, 2, and 3). Response variables were compressive strength, corrosion resistance expressed as remaining compressive strength and mass loss, and flowability. Results were analyzed using Minitab statistical software. Findings suggest that activator solution formulation has a significant effect on the properties of the resulting geopolymer binder. The experimental design used was found effective in establishing the optimum activator …

Mineralogical Transformations In Coal Feedstocks During Carbon Conversion, Based On Packed-Bed Combustor Tests: Part 2. Behavior Of Individual Particles, Ratale H. Matjie, Colin R. Ward, Zhongsheng Li

Coal Combustion and Gasification Products Journal Archive

Handpicked carbon-rich particles (coal or char), mineral-rich particles (heated stones), and bonded stone aggregates (clinkers) from the upper and lower parts of a pilot-scale packed-bed combustor bed, designed to simulate conversion or combustion processes, were subjected to mineralogical and inorganic geochemical studies, in order to evaluate the reactions that may occur during carbon conversion at a particle-by-particle scale. The mineral matter of the carbon-rich particles was found to have higher proportions of carbonate minerals and kaolinite than the mineral-rich (stone) particles in the coal feedstocks used in the study, and to form phases such as anorthite, gehlenite, pyrrhotite, troilite, and …

Mineralogical Transformations In Coal Feedstocks During Carbon Conversion, Based On Packed-Bed Combustor Tests: Part 1. Bulk Coal And Ash Studies, Ratale H. Matjie, Colin R. Ward, Zhongsheng Li

Coal Combustion and Gasification Products Journal Archive

Mineralogical and inorganic geochemical studies have been carried out on composite samples of six different coarse-crushed (,120 mm) feed coals tested in a pilot-scale packed-bed combustor designed to simulate conversion and some fixed-bed combustion processes, and also on composite samples of the ashes produced. The mineral matter of the coals consisted mainly of quartz, kaolinite, and Ca-bearing carbonate minerals (calcite, dolomite, aragonite), with minor proportions of illite, pyrite, and several other phases, along with some Ca in an organically associated form. The base to acid ratio of the coal ashes ranged from 0.1 to 0.3, due mainly to variations in …

Potential Indoor Air Exposures And Health Risks From Mercury Off-Gassing Of Coal Combustion Products Used In Building Materials, Christopher M. Long, Sonja N. Sax, Ari S. Lewis

Coal Combustion and Gasification Products Journal Archive

Coal combustion products (CCPs), including coal fly ash (CFA) and flue gas desulfurization (FGD) gypsum, have gained accepted use as substitutes for traditional substances in building materials. Because of the presence of mercury (Hg) in CCP materials, some concerns have been raised regarding the potential for Hg to off-gas from building materials into indoor air. Risk assessment offers a well-accepted, objective framework in which to determine whether such off-gassing could result in humanexposures of health concern. We thus conducted a screening-level human health risk assessment to estimate worst-case inhalation risks from indoor air exposures to Hg for multiple CCP utilization …

Quantifying The Benefits Of Using Flue Gas Desulfurization Gypsum In Sustainable Wallboard Production, Jin Cheol Lee, Sabrina L. Bradshaw, Tuncer B. Edil, Craig H. Benson

Coal Combustion and Gasification Products Journal Archive

Electric utilities produce more than 11.2 Mt of flue gas desulfurization (FGD) gypsum annually. Approximately 7.5 Mt is used in wallboard production. This article examines the environmental and cost benefits associated with replacement of natural gypsum in wallboard with FGD gypsum. A life-cycle analysis program was used to quantify the benefits of using FGD gypsum from electric power production in wallboard construction. Comparisons were made between energy consumption, water use, and greenhouse gas (GHG) emissions associated with obtaining and processing virgin gypsum material and those with FGD gypsum. The added impact of disposing of the unused FGD gypsum in landfills …

Waste Classification Of Slag Generated In A Pilot-Scale Entrained-Flow Gasifier, Ashleigh Cousins, Robin W. Hughes, David J. Mccalden, Dennis Y. Lu, Edward J. Anthony

Coal Combustion and Gasification Products Journal Archive

Series of gasification tests have been completed in the pilot-scale entrained-flow slagging gasifier at CanmetENERGY using Canadian coals, oil-sand coke, and blends of these fuels to determine if the produced slags are nonhazardous in nature. Solid wastes generated during these tests were analyzed for their trace metals, crystallinity, and toxic constituent leaching tendency in an attempt to provide more insight into the possibility of disposal or by-product use of gasifier-produced solid waste. The gasification tests were performed at conditions representative of commercial gasifiers using a dry-fuel-feed configuration. The lower-volatility elements were found to partition between the slag and process-water solids …

Evaluating Corrosion Control Alternatives For A Reverse Osmosis, Nanofiltration And Anion-Exchange Blended Water Supply, Rebecca J. Wilder

Electronic Theses and Dissertations

The research reported herein describes the study activities performed by University of Central Florida (UCF) on behalf of the Town of Jupiter Water Utilities (Town). The Town recently changed its water treatment operations from a combination of reverse osmosis (RO), lime softening (LS) and anion-exchange (IX) to a combination of RO, IX and nanofiltration (NF). Although this treatment change provided enhanced water to the surrounding community in terms of better contaminant removal and reduced DBP formation potential, integration of the NF process altered finished water quality parameters including pH, alkalinity and hardness. There was concern that these changes could result …

Effective Construction Schedule Management: Construction Project Monitoring With Project Performance Indicators & The Project Status Report, Christopher Michael Totin

Civil Engineering Theses - Archive

A thorough review of construction and engineering literature was conducted to discover and organize current best practices and standards for the purpose of monitoring a construction project. The status of a construction project is a measurement of its progress and performance in terms of time, cost, and scope. Awareness of a construction project's status improves decision-making on the part of owners, engineers, contractors, and other project stakeholders. Project Performance Indicators (PPI) are metrics generated by construction project schedules that define a project's status. Project personnel must monitor critical schedule and cost data, or PPI, in order to maintain control of …

Investigation Of Co-Pyrolysis Between Sargassum Macroalgae And Polystyrene, Ketwalee Kositkanawuth

Civil Engineering Dissertations - Archive

Biomass is one source of renewable energy which helps minimize greenhouse gas (GHG) emissions, specifically carbon dioxide (CO2), since biomass utilizes CO2 via photosynthesis. Various conversion processes are applied to utilize energy from biomass, including pyrolysis. Pyrolysis is a thermal route of decomposing biomass at high temperature without the presence of oxygen. The process generates three main products including bio-oil, residue, and non-condensable gases; however, the most promising product is the biomass oil, which is in liquid form and convenient for handle and transport. Numerous studies on pyrolysis of terrestrial biomass reveal that the crude bio-oil cannot be directly used …

Modeling Leachate Bod And Cod Using Lab-Scale Reactor Landfills And Multiple Linear Regression Analysis, Said Altouqi

Civil Engineering Dissertations - Archive

The increasing production of municipal solid waste is a direct consequence of the continuous growth of the world's population and economy. This fact makes protecting the environment against contamination by different kinds of waste a challenging job for engineers and decision makers. Conventional landfilling practices have sometimes failed to protect fresh water resources against leachate contamination as well as the atmosphere against greenhouse gases such as carbon dioxide and methane. Many developed countries have already taken serious steps toward moving to properly engineered, environmental friendly landfills.Landfill leachate contains organic and inorganic pollutants that have been extensively studied in the last …

The Performance Of Irish Grown Timber Composites Under Fire Conditions, Cillian Murphy

Theses

In comparison with many European countries Ireland does not make the most effective use of its native timber. It is good economic and environmental practice to promote the more efficient utilization of this natural resource. In recent years there has been a revival in the use of timber in multi-storey construction which predominantly utilises load bearing exposed timber composite members. These timber composites are typically manufactured in Europe using European timber.

The current study investigates the viability of using Irish grown timber composites as a direct replacement in these load bearing members. The main areas of focus will be the …

An Analysis Of Dredge Material Reuse Techniques For Ireland, Colm Sheehan

Theses

This thesis examines the use and applicability of a range of dredge material management techniques for the Republic of Ireland which will ultimately assist the stakeholders in the industry in assessing the available dredge material management options. A detailed study is presented into the critical parameters required for successful implementation of a range of dredge material management options. An overview of the Irish dredging industry including current dredge material management practice is presented. This is complemented by a detailed critical analysis of the industry which identifies areas requiring development and future challenges for the dredging industry in Ireland. To further …

A Study Of Creep And Shrinkage In Concrete With A Consideration Of Its Effects On Curved Post-Tensioned Concrete Bridges, William O'Sullivan

Theses

The first objective of the project was to explore the differences between Ordinary Portland Cement (OPC) and Ground Granulated Blast-Furnace Slag (GGBS) cement. The use of GGBS cement concrete is increasing in industry due to the environmental and durability benefits it gives compared with OPC concrete. Data on the creep properties of GGBS cement concrete is limited compared with the data that is available for OPC concrete. Laboratory testing was undertaken to determine the different effects of creep on OPC concrete and GGBS concrete.

The second project objective was to research the effects of creep on post - tensioned curved …

A Review Of National Msw Generation Assessments In The United States, David J. Tonjes, Krista L. Greene

Technology & Society Faculty Publications

Municipal solid waste (MSW) is generated in very large quantities (probably, between 200 and 400 million tonnes per year) in the United States (US). MSW is generated at millions of places and there is no one precise, general definition for MSW that is generally applied, despite US Environmental Protection Agency efforts. As an element of both commerce and politics, reporting may be framed towards particular ends. Therefore, the two best known assessments of the quantity of US MSW production differ by approximately 50%. The assessors understand some of the reasons for the differences, but our analysis suggests that there are …

Trapping Phosphorus In Runoff With A Phosphorus Removal Structure, Chad J. Penn, Joshua M. Mcgrath, Elliott Rounds, Garey A. Fox, Derek M. Heeren

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Reduction of phosphorus (P) inputs to surface waters may decrease eutrophication. Some researchers have proposed fi ltering dissolved P in runoff with P-sorptive byproducts in structures placed in hydrologically active areas with high soil P concentrations. Th e objectives of this study were to construct and monitor a P removal structure in a suburban watershed and test the ability of empirically developed fl ow-through equations to predict structure performance. Steel slag was used as the P sorption material in the P removal structure. Water samples were collected before and after the structure using automatic samples and analyzed for total dissolved …

Timing Of Residential Electric Loads To Reduce Air Emissions From Power Generation, Michelle Marinich Rogers

Wayne State University Theses

Over the course of a day, power utilities must respond to changing demand by dispatching or shedding output from different generators. Each generator is associated with a unique profile of air emissions, based on the type of fuel consumed, installed pollution controls, and the generator's efficiency. The aim of this study is to determine whether shifting electric demand to times when cleaner generation sources are available would result in overall emissions reduction.

Dynamic wholesale pricing in the electric power market, specifically the Locational Marginal Price (LMP), provides a means to estimate the marginal generator fuel type. This knowledge was used …

High Intensity Land Treatment (Hilt) Practices, John P. Martin, Ronald C. Sims

Reports

Land treatment is categorized in the Resource Conservation and Recovery Act of 1976 (RCRA) as one of the land disposal options for managing hazardous waste constituents within the defined treatment zone before such constituents can be transported to surface water, groundwater, or air. Under the authroity of Subtitle C of RCFA, the U.S. Environmental Protection Agency has promulgated regulations governing the treatment and disposal of hazardous wastes in land treatment units (40 CFR, Part 264, Subpart M, July 26, 1982). The objectives of this report were to identify land treatment facilities meeting the defined high intensity land treatment (HILT) criteria, …

Solving Problems In Water Quality, Utah Water Research Laboratory

Reports

No abstract provided.

Cee & Uwrl Research In Action, Utah Water Research Laboratory

Reports

Introduction: The Department of Civil and Environmental Engineer (CEE) and the Utah Water Research Laboratory (UWRL) have a symbiotic working relationship. The CEE Department provides the pricipal investigators with academic affiliation to the university while the UWRL provides faculty with a strong water research arena. Both the CEE department and the UWRL have been involved in research and problem solving for government agencies and private industry.

Information For Operation Of Water Supply Systems, L. Douglas James, Glen E. Stringham, J. Clair Batty

Reports

Introduction: Water requirements increase as more people use more water for domestic purposes. The increase is augmented as technological advances add to the water needs of agriculture and industry. Additional urban landscaping adds further to the demand. Simultaneously, the same forces increase demands for flood control, hydrelectric power, and navigation; and a more urbanized population want more flows preserved for productive natural environments, recreational use, and aesthetic enjoyment. The response over the years to these growing demands on water resources has been to supply increasing amounts of water and greater levels of development for other purposes by building more projects, …