Civil and Environmental Engineering Commons^™

Seismic Response Of Peaty Organic Soils As A Levee Foundation Material, Robb E.S. Moss, Justin C. Hollenback

Civil and Environmental Engineering

The dynamic response of peaty organic soils is not well understood but its poor competency as an engineering material is well known. Its use as a foundation material is generally avoided through careful selection of project location, or removal and replacement with more suitable material. In certain situations peaty organic soils are unavoidable because of prior land use and subsequent development of infrastructure. In a delta environment levees are often found to be overlying peaty organic deposits, the California Bay Delta and New Orleans levee systems are two important examples. The Bay Delta is in a seismically active area and …

Shake Table Testing Of Seismic Soil-Foundation-Structure-Interaction, Robb E.S. Moss, Steven Kuo, Victor Crosariol

Civil and Environmental Engineering

This research involves shake table testing of 1g scale models that mimic the coupled seismic response of a structure on a shallow mat foundation and the foundation soil (termed soil‐foundation‐structure‐interaction or SFSI). In previous research, SFSI effects have been quantified through analytical models, numerical analyses, and limited field data. This research is working towards increasing the amount of empirical data through scale model shake table testing. A suite of earthquake times histories are considered in evaluating a 10^th scale soil‐structure model using a flexible wall barrel on a 1‐D shake table. San Francisco Young Bay Mud (YBM) is used …

Characterization And In Vitro Toxicity Of Copper Nanoparticles (Cu-Nps) In Murine Neuroblastoma (N2a) Cells, Sitao Veronica Brownheim

Theses and Dissertations

Nanomaterials, classified as materials within the 1 - 100 nanometer range, have seemingly endless applications. It is very important to the Air Force to increase the understanding of Cu-NPs and the possible health impacts from nanomaterial exposure prior to wide-spread industry and military use. Therefore, the purpose of this research is to thoroughly characterize the properties of three different copper samples upon suspension into aqueous solutions over time: Cu-NPs (Cu 25 nm), CuO-NPs (CuO 40 nm), and Cu-MSP (Cu 500nm). Additionally, this research seeks to observe in vitro effects upon murine neuroblastoma cells (N2A) by these three types of particles …

Application Of Relational Contracting Methods To Federal Construction Projects, Travis R. Johnson

Theses and Dissertations

Relational contracting is a method designed to improve relationships between contracted parties. The federal construction sector was a leader in the development and implementation of an early form of relational contracting known as partnering. Since then, alliancing has emerged as the new evolution of relational contracts. While it provides many potential benefits to contracting parties, alliancing has not yet been utilized in federal construction procurement, which is subject to stringent regulations. A commercially available standard form alliancing contract was selected for analysis against the Federal Acquisition Regulation. Key practices that characterize the alliancing method were identified. Utilizing a panel of …

Modeling Enhanced Storage Of Groundwater Contaminants Due To The Presence Of Cracks In Low Permeability Zones Underlying Contaminant Source Areas, Jeremy M. Miniter

Theses and Dissertations

Throughout DoD, chlorinated aliphatic hydrocarbons (CAHs), a type of Dense Non-Aqueous Phase Liquid (DNAPL), have been frequently used. In the subsurface, spilled DNAPLs may pool atop low permeability clay layers. In this study a numerical model is constructed using the Groundwater Modeling System to assess how cracks in the clay, either pre-existing or the result of DNAPL-clay interactions, might impact a dissolved CAH plume generated by the DNAPL source. The conceptual model posits a DNAPL source in a high permeability sand aquifer sitting atop a low permeability clay layer. The model assumes dissolved CAH generated by the DNAPL is transported …

Retrospective Geospatial Modeling Of Pm10 Exposures From Open Burning At Joint Base Balad, Iraq, John P. Rinker

Theses and Dissertations

Predicting, determining, and linking theater-related source-specific exposures to health effects has proven difficult. The purpose of this research is to delineate retrospective exposure zones using spatially interpolated particulate air sampling point data from Joint Base Balad, create burn pit exposure isopleths from dispersion model outputs, and merge into a combined exposure model in GIS. Interpolated monitoring results and dispersion modeled results were combined to compare modeled exposures across base. Burn pit contribution to total PM10 was also modeled. The combined dispersion and interpolation map showed elevated concentrations within a 1 kilometer buffer of the burn pit. Buildings within this area …

Degradation Modeling Of Polyurea Pavement Markings, Jonathan D. Needham

Theses and Dissertations

Polyurea is a long life pavement marking material used for assets requiring long periods of uninterrupted accessibility. Knowing the performance characteristics of such markings is critical to asset management planning focused on maximizing marking material life-cycles. This paper presents the performance characteristics of polyurea pavement markings in North Carolina using linear regression models. The models generated by this research provide pavement marking managers with tools to better allocate limited manpower and resources in order to optimize budgets while meeting newly proposed pavement marking retroreflectivity levels of service as proposed by the Federal Highway Administration. This research constructed performance models for …

Understanding Schedule Forecasting Shortfalls In Federal Design-Build Facility Procurement, Timothy W. Gannon

Theses and Dissertations

This research explores whether initial schedules provide reliable forecasting for project control in federal design build facility procurement. The purpose of this research is to understand how scheduling operates in the Department of Defense environment and identify how project change underscores schedule uncertainty. The research methodology involves a comparative analysis of project schedule data from three case studies. The investigation documents how initial project schedules fail to sufficiently forecast and provide a reliable baseline for total cost, final duration, and activity count for three design-build projects. Most schedule variability occurs after the 100% design benchmark. Furthermore, activity growth highlights the …

Impact Of Snow Removal Operations On Thermoplastic Pavement Markings, Monica L. Monfette

Theses and Dissertations

This pilot study explored the effect snow removal operations have on thermoplastic pavement markings. Including snow removal as a separate independent variable is unique because much of the previous research performed on pavement marking degradation mentioned snow removal as a direct cause in a marking degrading more rapidly; however, it is mentioned as an afterthought and a suggestion to be considered in future research. This pilot study looked at 10 thermoplastic markings and all marking data were collected in the field, using a hand-held retroreflectometer. Data collected began 60 days after initial marking application and ended 12 months after initial …

Paint Pavement Marking Performance Prediction Model That Includes The Impacts Of Snow Removal Operations, Dale M. Mull

Theses and Dissertations

The results of this research effort were captured in two manuscripts drafted for publication in peer reviewed journals. The first manuscript validated a previously published model with an expanded data set, updated service life predictions for painted pavement markings using recently released pavement marking retroreflectivity minimums, and incorporated recent cost data to evaluate two alternative methods of compliance with the new retroreflectivity minimums for two-lane roads. The second manuscript developed a new performance prediction model for paint pavement markings that includes the impact of snow removal operations and then applied the model to four real-world roadways to determine if replacement …

Modeling Vertical Flow Treatment Wetland Hydraulics To Optimize Treatment Efficiency, David T. Roen Ii

Theses and Dissertations

An upward Vertical Flow Treatment Wetland (uVFTW) at Wright Patterson AFB designed to bioremediate contaminated groundwater exhibits hydraulic short-circuiting. Prior studies estimated that groundwater flowed through less than 50% of the wetland’s volume, and that the mean residence time was significantly less than the nominal residence time, which was calculated assuming flow through the entire wetland volume. The objective of this research was to investigate how uVFTW hydraulics affects treatment efficiency, and to propose design strategies to maximize treatment efficiency. A groundwater flow and contaminant transport model of a uVFTW that couples hydraulics and degradation kinetics was built and applied …

Evaluation Of The Effectiveness Of A Variable Advisory Speed System On Queue Mitigation In Work Zones, Aaron B. Wilson

Theses and Dissertations

Construction is increasing due to increased demand and degradation of existing infrastructure. This construction often results in a reduced number of traffic lanes or lane width during construction, which often creates queue at the entrance to work zones. Variable Advisory Speed Systems (VASS) provide drivers with advanced warning regarding traffic speeds downstream to help them make better decisions in advance of problems that may exist downstream. The purpose of this study was to evaluate the effectiveness of a VASS at mitigating queues in work zone entrances during peak hour conditions. It was anticipated that by implementing a VASS queues would …

Tool Life Of Various Tool Materials When Friction Spot Welding Dp980 Steel, Christopher Shane Ridges

Theses and Dissertations

In this study, friction spot welding was used to join DP980 steel sheet. Four different ultra-hard tool materials were used with the objective of determining which tool material produced the highest number of acceptable-strength welds. Three of the tools were composed of various mixtures of polycrystalline cubic Boron Nitride (PCBN), Tungsten, and Rhenium. These materials are referred to herein as Q60, Q70, and Q80, the "Qxx" designation denoting the percentage of the volume of the tool material composed of PCBN. The fourth tool tested was composed entirely of PCBN. The Q70 tool produced approximately 1100 welds of acceptable strength before …

Design Guide For Cold-Formed Steel Purlin Roof Framing Systems, American Iron And Steel Institute (Aisi)

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

"The Design Guide for Cold-Formed Steel Purlin Roof Framing Systems provides information for the designer of single span and continuous multiple span steel purlin-supported roof systems with an emphasis on the design anchorage systems. The Design Guide is based on the American Iron and Steel Institute (AISI) North American Specification for the Design of Cold-Formed Steel Structural Members, 2007 Edition. Where the Specification is silent on design issues, the procedures are based on published references and on the opinions of the authors.

The Design Guide was co-sponsored by the American Iron and Steel Institute (AISI) and the Metal Building …

Development And Delivery Of An Integrated Project-Based Jobsite Management Undergraduate Course, Philip L. Barlow

Construction Management

At universities offering professional degrees, such as construction management, some programs are moving towards and exploring alternative delivery methods for achieving the curriculum's goals and objectives. This article describes an integrated and project-based learning Jobsite Construction Management course being taught at a major university. A course overview describing the various delivery methods used (such as lectures, reading assignments, supplemental materials, guest lecturers, lab assignments, technology, and jobsite visits) is presented. The benefits of vertical and horizontal course integration in a project-based learning environment are emphasized and more fully explained. A class survey was conducted over two quarters to assess the …

Investigation Of The Behavior Of Free-Standing Gabions In Seismic Regions, Amy Ransom

Master's Theses

This thesis investigates the behavior of free-standing gabion walls in areas of mild seismicity. To investigate this behavior, three walls of varying internal cable patterns were constructed at a quarter-scale. These walls were tested with a mass shaker, and mode shapes, tone extractions, and damping ratios were calculated. A modal analysis was conducted using design spectra created from a suite of seven earthquakes from countries bordering Kenya. The corresponding lateral forces to these spectral displacements were found, and the restoring eccentricities from the soil restoring force were backed out through a summation of moments. All analysis was experimentally done due …

Using Equal‐Area Quadratic Splines To Compute Depth‐ Weighted Averages Of Soil Chemical Parameters, Chris E. Johnson, Jeremy Tamargo

Civil and Environmental Engineering - All Scholarship

No abstract provided.

Development Of Probability Based Intensity- Duration-Frequency Curves Under Climate Change, Tarana A. Solaiman, Slobodan P. Simonovic

Water Resources Research Report

Hydrologic design of storm sewers, culverts, retention/detention basins and other components of storm water management systems are typically performed based on specified design storms derived from the rainfall intensity-duration-frequency (IDF) estimates and an assumed temporal distribution of rainfall. Use of inappropriate data or design storms could lead to malfunctions of the infrastructure systems: over-estimation may result in costly over-design or under-estimation may be associated with risk and human safety. One of the expected hydroclimatic impacts of climate change for London is the increase in the magnitude and frequency of extreme rainfalls which can have serious impact on the design, operation …

Asce 7–05 Design Rule For Relative Strength In A Tall Buckling-Restrained Braced Frame Dual System, Lisa J. Aukeman

Master's Theses

In mid- to high-rise structures, dual systems (DS) enable a structural designer to satisfy the stringent drift limitations of current codes without compromising ductility. Currently, ASCE 7-05 permits a variety of structural systems to be used in combination as a dual system yet the design requirements are limited to the following statement: Moment frames must be capable of resisting 25% of the seismic forces while the moment frames and braced frames or shear walls must be capable of resisting the entire seismic forces in proportion to their relative rigidities.

This thesis assesses the significance of the 25% design requirement for …

Optimization Of Point-Of-Use Water Treatment Device For Disaster Relief, Margaret June Herzog

Master's Theses

Point-of-use (POU) drinking water treatment is a common method of providing drinking water in disaster relief situations when critical water infrastructure is damaged. In these cases, POU treatment devices can be used to treat local water until relief organizations set up more permanent water provision methods. One such POU technology is PŪR^® Purifier of Water, a combined coagulation/flocculation and disinfection chemical treatment sachet produced by Procter & Gamble. PŪR^® has been shown to treat contaminated water to meet water quality standards and guidelines set by the U.S. EPA for water purifiers and by the World Health Organization and …

Water And Air Quality Performance Of A Reciprocating Biofilter Treating Dairy Wastewater, Seppi Matthew Henneman

Master's Theses

ABSTRACT

Water and Air Quality Performance of a Reciprocating

Biofilter Treating Dairy Wastewater

Seppi Matthew Henneman

Agricultural non-point source pollution is the leading water quality problem in surface water and the second leading problem in ground water in the US.  Among the contaminants, nutrients (such as nitrogen, phosphorus, potassium) can be transported from agricultural fields when cropland is not managed properly.  In California, dairy manure application to cropland has become tightly regulated with the goal of decreasing such nutrient pollution.  Dairies unable to balance their manure nutrient supply with cropland application area may benefit from a nitrogen removal technology.  One …

A Petri Net Simulation Model For Virtual Construction Of Earthmoving Operations, F. F. Cheng, Y. W. Wang, Yong Bai

Civil and Environmental Engineering Faculty Research and Publications

A common and extended Petri net simulation framework for virtual construction of earthmoving operations is developed to simulate dynamic changes of workflow and information flow in the earthmoving construction process and illustrate the constraint relationship between various operational equipment and construction restrictions. The proposed framework considers factors that influence earthmoving operations including randomness of construction activities, individual preference of equipment scheduling, and constraint relationship between equipment and construction environment. With the given equipment availability and project indirect cost, the framework can predict construction situation, equipment utilization rate, estimated duration and cost to achieve visualized and intelligent scheduling of virtual construction …

Case Study Evaluation Of Dynamic Traffic Assignment Tools, John Gliebe, Åsa Bergman

Urban Studies and Planning Faculty Publications and Presentations

A case study was undertaken in order to evaluate the potential use of dynamic traffic assignment (DTA) tools by Oregon Department of Transportation (ODOT) and its partner agencies. The objectives of this study were to provide insight into the nature of DTA models, to inform the program selection process, and to develop realistic expectations for potential DTA work plans. The overarching goal of this report is to describe the process followed and experiences of the study team in developing and testing DTA network models. Two available DTA programs were selected for in-depth analysis from a preliminary screening of available programs: …

Causes And Countermeasures Related To Motorcycle Crashes, Kenneth R. Agent, Jerry G. Pigman

Kentucky Transportation Center Research Report

The number of motorcycle crashes (especially fatal crashes) has increased substantially in Kentucky in the past several years. A detailed analysis of crashes involving motorcycles could provide insight into the characteristics and causes of these crashes and identify potential countermeasures for addressing the problem. The objectives of this study were to: a) evaluate and analyze motorcycle crashes and b) identify the causes and potential countermeasures to reduce the number and severity of the crashes.

The literature was reviewed to determine the state-of-the-art related to motorcycle crash research. An analysis of traffic crashes involving motorcycles was conducted using several years of …

Postearthquake Recovery Of A Water Distribution System: Discrete Event Simulation Using Colored Petri Nets, Ronaldo Luna, Nandini Balakrishnan, Cihan H. Dagli

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Planning and preparedness is essential for any resilient infrastructure system. Modeling and simulation give engineers and planners a better understanding of the system and help them make better decisions. the objective of this study is to demonstrate an improved model for the disaster restoration process by using a discrete event simulation approach. the study also aims to help improve the post-earthquake restoration process by simulating restoration curves. in this paper, colored Petri nets are used to model the system and to simulate its behavior. the resource allocation after a rare event such as an earthquake differs from the resource allocation …

Corrosion-Resistant Glasses For Steel Enamels, Richard K. Brow, Signo Tadeu Dos Reis, Michael L. Koenigstein, Genda Chen

Materials Science and Engineering Faculty Research & Creative Works

A cementitious composite material wherein glass-coated steel rods are positioned in a cementitious matrix. The glass composition for coating the steel reinforcing rods includes between about 33-45 weight percent SiO₂, 13.5-19.5 weight percent B₂O₃, 3.5-4.6 weight percent Al₂O₃, 4.0-13.5 weight percent K₂O, 5.5-15.5 weight percent ZrO₂, 8.6-15.9 weight percent Na₂O, 4.6-5.1 weight percent CaO, 0.6-0.7 weight percent MnO₂, 1.0-1.0 weight percent NiO, and 1.0-1.1 weight percent CoO. The glass composition is typically in compression on the rods at ambient temperatures, has a …

2011 Directory Of Indiana State, County, City And Town Officials Responsible For Road And Street Work, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Directory

Contact information for local agency officials and employees responsible for Indiana’s local road infrastructure.

Bs News March/April

Building Services Engineering

No abstract provided.

Modeling Of Cfrp-Concrete Interface Subjected To Coupled Pull-Out And Push-Off Actions, Tayyebeh Mohammadi, Baolin Wan, Jian-Guo Dai

Civil and Environmental Engineering Faculty Research and Publications

This paper presents a finite element (FE) modeling method for predicting the IC debonding failure when the FRP/concrete interface is subjected to coupled pull-out (shear) and push-off (dowel) actions. Damaged plasticity model was used to simulate the behavior of concrete close to FRP/concrete interface. A thin damage band exposed to mixed-mode loading condition was modeled separately along the FRP-concrete interface. Cohesive elements were used to model the FRP/concrete interface. A sensitivity analysis was performed to find the appropriate damaged band dimensions, bending stiffness of FRP, and tensile strength of concrete for the model. The numerical results were validated by the …

Probabilistic Fault Displacement Hazard Analysis For Reverse Faults And Surface Rupture Scale Invariance, Zachary E. Ross

Master's Theses

p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px 'Times New Roman'}

A methodology is presented for evaluating the potential surface fault displacement on reverse faults in a probabilistic manner. This methodology follows the procedures put forth for Probabilistic Fault Displacement Hazard Analysis (PFDHA). Empirical probability distributions that are central to performing a PFDHA are derived from field investigations of reverse faulting events. Statistical analyses are used to test previously assumed properties of scale invariance with respect to magnitude for normalized displacement. It is found that normalized displacement is statistically invariant with respect to magnitude and focal mechanism, allowing for the …