Civil and Environmental Engineering Commons^™

Development Of Adsorption Filtration Process For Virus Removal For Drinking Water Treatment, Vishal Vijay Gawarikar

Dissertations

Recent monitoring studies have indicated that many ground water (GW) sources would benefit from the development of effective technologies for removing viruses. Although reverse osmosis can achieve high log removal it is not economical. The main objective of this study is to test and validate a novel adsorption filtration (AF) technology for removing viruses from GW sources for drinking water production in New Jersey.

The convective diffusion of viruses to adsorbent particle surfaces in flow packed beds (FPB) enhances their removal efficiency if the adsorbent particle size can be decreased to about 100 microns. The development of effective virus removal …

Mechanics Of Biocell Landfill Settlements, Chamil Hiroshan Hettiarachchi

Dissertations

Prediction of landfill gas generation and settlements are of concerns in design and maintenance of biocell landfills. Accurate settlement prediction is essential for design of piping systems used for the delivery of re-circulated leachate and recovery of landfill gas. Landfill settlement is the result of change in overburden stresses and biodegradation of waste. Biodegradation-induced settlement results from the re-arrangement of waste skeleton in response to the decomposition of waste mass.

Current practice of landfill settlement modeling is predominantly empirical, thus most of the available techniques make no attempt to simulate the real mechanisms of waste settlement. Traditionally compressibility index is …

Virtual Transshipments And Revenue-Sharing Contracts In Supply Chain Management, Zhaoqiong Qin

Dissertations

This dissertation presents the use of virtual transshipments and revenue-sharing contracts for inventory control in a small scale supply chain. The main objective is to maximize the total profit in a centralized supply chain or maximize the supply chain's profit while keeping the individual components' incentives in a decentralized supply chain.

First, a centralized supply chain with two capacitated manufacturing plants situated in two distinct geographical regions is considered. Normally, demand in each region is mostly satisfied by the local plant. However, if the local plant is understocked while the remote one is overstocked, some of the newly generated demand …

Utility Of Remote Sensing Data In Retrieval Of Water Quality Consituents Concentrations In Coastal Water Of New Jersey, Ting Yu

Dissertations

Three important optical properties used for monitoring coastal water quality are the concentrations of chlorophyll (CHL), color dissolved organic matter (CDOM) and total suspended materials (TSM). Ocean color remote sensing, a technique to collect color data by detection of upward radiance from a distance (Bukata et al.,1995), provides a synoptic view for determining these concentrations from upwelling radiances. In the open ocean (Case-I), it is not difficult to derive empirical algorithms relating the received radiances to surface concentrations of water quality parameters. In coastal waters (Case-Il), there are serious unresolved problems in extracting chlorophyll concentration because of high concentration of …

Aisi Standard For Cold-Formed Steel Framing – Truss Design, 2004 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included in the Commentary. With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is …

Standard For Cold-Formed Steel Framing - Truss Design, 2004 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included in the Commentary.

With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is …

Stormwater Utility Fees: Considerations & Options For Interlocal Stormwater Working Group (Iswg), New England Environmental Finance Center

Water

Stormwater utilities are a concept whose time seems to have arrived. Established by relatively few communities in the 1970s as a method of funding flood control measures, stormwater utilities now exist in over 400 municipalities and counties throughout the United States. During the next 10 years, their numbers are expected to swell dramatically – by one estimate to over 2,000 by the year 2014.

The reasons for this growth are multifold. Federal stormwater regulations passed in the 1980s (Phase I of the National Pollutant Discharge Elimination System Program, or NPDES), motivated many larger communities to seek alternative funding sources and …

Determination Of Surface And Thickness Characteristics Of Textured Geomembranes Using Image Analysis, Nazli Yesiller, Arif Cekic

Civil and Environmental Engineering

Image analysis was used to determine surface topography and thickness of textured geomembranes. Images of cross sections (specimen length × thickness) of geomembranes were obtained at 50× magnification using a digital optical microscope. Thickness was determined as the distance between the top and bottom surfaces along an entire cross section. For surface analysis, profiles of top and bottom surfaces were extracted from the cross section images. Amplitude, spatial, hybrid, and functional texture parameters were determined. Tests were conducted on eleven samples of HDPE and LLDPE geomembranes manufactured by co-extrusion and embossing at varying thicknesses. The geomembranes were classified into three …

Ronan Point Apartment Tower Collapse And Its Effect On Building Codes, Cynthia Pearson, Norbert Delatte

Civil and Environmental Engineering Faculty Publications

In the early morning hours of May 16, 1968, the occupant of apartment 90 on the 18th floor of the 22-story Ronan Point apartment tower, in London, lit a match to brew her morning cup of tea. The resulting gas explosion initiated a partial collapse of the structure that killed four people and injured 17 (one of whom subsequently died). On investigation, the apartment tower was found to be deeply flawed in both design and construction. The existing building codes were found to be inadequate for ensuring the safety and integrity of high-rise precast concrete apartment buildings. The Larsen–Nielson building …

Minimum Velocities For The Suspension Of Fine Sediment In The Green River Canal, Michael W. Stoeber

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

This paper focuses on a canal in the Gunnison Valley, located in central Utah, which diverts water from the sediment-laden Green River. Grain size analyses were performed on sediment samples taken from the canal. These grain size analyses were used to determine the grain size distribution of the fine sediment, classify the fine sediment, and compare the fine sediment to a sediment deposit in the Green River. The critical incipient velocity for the D₅₀ and D₁₀₀ and the critical grain entrainment velocity corresponding to the D₉₅ were determined through flume experimentation. Two methods, developed by prior researchers, …

Failure Of Cold-Formed Steel Beams During Concrete Placement, Norbert Delatte

Civil and Environmental Engineering Faculty Publications

During a concrete placement on the second story of a building under construction, the supporting cold-formed steel beams collapsed. Four workers were injured. The collapse occurred while concrete was being placed onto steel decking on the second floor of the structure. Cold-formed steel beams, without shoring, supported the steel decking. Analysis of the steel beams under the weight of concrete and workers using the applicable American Concrete Institute and American Iron and Steel Institute documents indicated that the beams were overstressed for construction loads. After the collapse, part of the structure was rebuilt using thicker beams. For the reconstruction, the …

Development Of Kentucky’S Highway Incident Management Strategic Plan, Monica L. Barrett, Joseph D. Crabtree, Jerry G. Pigman, Jennifer R. Walton

Kentucky Transportation Center Research Report

Even though Kentucky has undertaken many initiatives to improve specific aspects of incident management, there has never been a plan that establishes an overall framework for a systematic, statewide, multi-agency effort to improve the management of highway incidents. The objective of this project was to develop a strategic plan that provides a vision and strategy for significantly improving all aspects of incident management. This report identifies the current and best practices for highway incident management in the United States and in Kentucky and establishes a vision for the future of highway incident management in Kentucky. The Plan developed through the …

Evaluation Of Auto Incident Recording System (Airs), Eric R. Green, Kenneth R. Agent, Jerry G. Pigman

Kentucky Transportation Center Research Report

The Auto Incident Recording System (AIRS) is a sound-actuated video recording system. It automatically records potential incidents when activated by sound (horns, clashing metal, squealing tires, etc.). The purpose is to detect patterns of crashes at intersections for use in implementing relevant improvements. Videos of incidents and near-incidents were obtained after AIRS was placed in service at an intersection in Louisville, Kentucky on July 22, 2001. Crash reports were obtained from January 1998 through September, 2004 to; a) compare to the available data from AIRS videos, and b) compare the crashes before and after various improvements were made. A traffic …

Speed Estimation For Air Quality Analysis, Mei Chen, Huafeng Gong

Kentucky Transportation Center Research Report

Average speed is an essential input to the air quality analysis model MOBILE6 for emission factor calculation. Traditionally, speed is obtained from travel demand models. However, such models are not usually calibrated to speeds. Furthermore, for rural areas where such models are not available, there has not been a reliable method for estimating speed.

In this study, a procedure was developed based on the Highway Economic Requirement System (HERS) speed model to estimate average speed using as input various data such as roadway characteristics and traffic conditions. This procedure was coded in MS Excel macro and can be attached to …

Kentucky’S Highway Incident Management Strategic Plan, Monica L. Barrett, Joseph D. Crabtree, Jerry G. Pigman, Jennifer R. Walton

Kentucky Transportation Center Research Report

Kentucky ’s Highway Incident Management Strategic Plan consists of a mission statement, 4 goals, 16 objectives, and 49 action strategies. The action strategies are arranged by priority and recommended time frame for implementation. When implemented, the action strategies will help Kentucky achieve its primary goals for incident management: 1) improved safety of responders, highway workers, and motorists; 2) reduced traffic delay; 3) improved motorist awareness; and 4) improved responder and highway worker preparedness.

Context Sensitive Design – Thinking Beyond The Pavement: Documentation Of Workshop Development And Training, Jerry G. Pigman, Donald L. Hartman, Theodore Hopwood Ii, Kenneth R. Agent, Lenahan O'Connell, Nikiforos Stamatiadis, Patrick Tyndall

Kentucky Transportation Center Research Report

This report documents the development and presentation of the workshop titled “Thinking Beyond the Pavement – A Workshop on Context Sensitive Design”. Work began on the workshop development in 1998 after the Kentucky Transportation Cabinet was selected as one of the pilot states to implement a training program for context sensitive design. The Kentucky Transportation Center at the University of Kentucky was selected to develop and deliver the training to state personnel and consultants who were commonly involved with project development. The training course was comprised of the following four modules:

• Facilitated Communication and Public Involvement,
• Environmental Issues,
• Liability Issues, …

Sensitivity And Uncertainty Analysis Coupled With Automatic Calibration For A Distributed Watershed Model, Misgana K. Muleta, John W. Nicklow

Civil and Environmental Engineering

Distributed watershed models should pass through a careful calibration procedure before they are utilized as a decision making aid in the planning and management of water resources. Although manual approaches are still frequently used for calibration, they are tedious, time consuming, and require experienced personnel. This paper describes an automatic approach for calibrating daily streamflow and daily sediment concentration values estimated by the US Department of Agriculture’s distributed watershed simulation model, Soil and Water Assessment Tool (SWAT). The automatic calibration methodology applies a hierarchy of three techniques, namely screening, parameterization, and parameter sensitivity analysis, at the parameter identification stage of …

2004 Statewide Wheel Tax Rates, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Publications

This publication is a compilation of wheel tax rates using data provided by the Indiana Bureau of Motor Vehicles.

Bs News

Building Services Engineering

No abstract provided.

Uncertainty Assessment Of Hydrologic Model States And Parameters: Sequential Data Assimilation Using The Particle Filter, Hamid Moradkhani, Kuo-Lin Hsu, Hoshin V. Gupta, Soroosh Sorooshian

Civil and Environmental Engineering Faculty Publications and Presentations

Two elementary issues in contemporary Earth system science and engineering are (1) the specification of model parameter values which characterize a system and (2) the estimation of state variables which express the system dynamic. This paper explores a novel sequential hydrologic data assimilation approach for estimating model parameters and state variables using particle filters (PFs). PFs have their origin in Bayesian estimation. Methods for batch calibration, despite major recent advances, appear to lack the flexibility required to treat uncertainties in the current system as new information is received. Methods based on sequential Bayesian estimation seem better able to take advantage …

Inside Unlv, Erin O'Donnell, Diane Russell, Carol C. Harter

Inside UNLV

No abstract provided.

Nonlinear Model For Reinforced Concrete Under Cyclic Loading, Aly Said, M. Elmorsi, M. Nehdi

Civil and Environmental Engineering and Construction Faculty Research

Most of the available shear models for reinforced concrete rely on empirical formulations. In this study, a rational shear stress function is used to define the shear stress–strain envelope for reinforced concrete. Cyclic rules are proposed to define the loading, unloading and reloading relationships for reinforced concrete under shear stress reversals. A normal stress function describing the cyclic relationship of concrete under axial stress is also introduced. The proposed functions are verified using experimental data of reinforced concrete panels tested under monotonic and cyclic loading. Subsequently, the normal and shear stress functions along with their cyclic rules are integrated in …

Conceptualization And Development Of A Dam Break Life-Loss Estimation Model, Maged A. Aboelata

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Catastrophic events such as dam failures or severe floods are considered to be of low probability, although their consequences can be extremely high and might include loss of life. Earlier studies have linked circumstances surrounding historical darn failure events to actual loss of life and produced formulations using statistical analysis of these events. Shortcomings of these methods include the inability to adjust life-loss estimates based on the type of dam failure, global averaging of population at risk, and ignoring the dynamics of the evacuation process.

The main objective of this research is to develop a practical and improved life-loss estimation …

The Social And Economic Costs Of Employee Misclassification In The Maine Construction Industry, Françoise Carré, Randall Wilson

Center for Social Policy Publications

With this study, a cross disciplinary team of the Center for Construction Policy Research has taken a first and significant step in documenting employee misclassification in the Maine construction industry. This report documents the dimensions of misclassification and its implications for tax collection and worker compensation insurance.

Misclassification occurs when employers treat workers who would otherwise be waged or salaried employees as independent contractors (self employed). Or as one report commissioned by the U.S. Department of Labor put it, misclassification occurs “when workers (who should be) getting W-2 forms for income tax filing instead receive 1099-Miscellaneous Income forms."

Performance Of Concrete Bridge Deck Surface Treatments, Tyler S. Nelsen

Theses and Dissertations

The purpose of this research was to identify the types of surface treatments available for use on concrete bridge decks and to determine which materials are most capable of providing long-term protection from contamination by chloride ions. The products addressed in this report primarily include urethanes, silicon-based sealers, and epoxies. An extensive literature review was conducted to document common overlay distresses, performance histories, and properties of specific surface treatment products currently available in the industry. In addition, three reports summarizing in-house experiments performed by the Utah Department of Transportation between 1995 and 2003 regarding various types of surface treatments were …

Efficient Water Use On Construction Sites, David E. James, Thomas C. Piechota

Civil and Environmental Engineering and Construction Faculty Research

One of the objectives of this research project was to develop strategies to optimize dust control efficiency by developing and promoting best management practices for water application, or exploring the cost efficiency of dust control alternatives. Ideally, the results of this research will result in practical recommendations that minimize water use and contractor cost, while maximizing the improvement in control of dust from construction sites (i.e., improved air quality). The overall goal was to gather information and data from field activities that will assist the local agencies (e.g., SNWA and the Clark County Air Quality Management District) in developing water …

Developing A Gis And Hydrological Modeling Approach For Sustainable Water Resources Management In The West Bank -- Palestine, Walid Wajeeh Sabbah

Theses and Dissertations

This research deals with setting up a GIS and hydrological modeling based approach for sustainable water resources management in the West Bank of Palestine. This water sustainability approach took into consideration the water balance, the social, the economic, the demographic, the environmental, and the institutional components in order to enhance and promote the sustainable development in Palestine, both on the short and long runs. To evaluate the water balance component, a methodology was introduced to create the Water Sustainability Map (WSM). Since the groundwater is currently the only accessible water source by the Palestinians, the WSM is represented by the …

Sub-Surface Corrosion Research On Rock Bolt System, Perforated Ss Sheets And Steel Sets For The Yucca Mountain Repository — Quarterly Technical Report No. 3, Dhanesh Chandra, Jaak J.K. Daemen

Publications (YM)

This report encompasses the work done for third quarter in accordance to cooperative agreement of UCCSN for the Task 019 “Subsurface Corrosion Research on Rock Bolt System, Perforated SS Sheets and Steel Sets for the Yucca Mountain Repository”, the objective of which was proposed earlier, to conduct corrosion research and predict the durability of rockbolts and other underground metallic roof supports. We have recently started working on oxidation tests using Thermogravimetric Analyzer (TGA), stress corrosion cracking/hydrogen embrittlement studies on rock bolts, other support materials including bench mark materials. In this quarterly report we will discuss “Dry” oxidation of steels and …

Aisi Standard For Cold-Formed Steel Framing – Header Design, 2004 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included in the Commentary. With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is …

Standard For Cold-Formed Steel Framing- Lateral Design, 2004 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specificreferences are included in the Commentary.

With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is anticipated …