Civil and Environmental Engineering Commons^™

Calorific Values Of Building Materials And Their Effect On The Structural Environment, Graham Doyle

Theses

As materials are seen to be a distinct source of fire and to avoid the destructive effects of fire to people and the environment, there is certainly a need for an assessment of building materials, internal finishes and contents to be conducted in a fire engineering context. This report examines the effect of these materials on the structural environment with a view of ultimately determining compartmental fire loads.

Research has shown that there is a significant lack of information available in regards to the calorific values of materials, and in particular building materials. In addition, material calorific values and generic …

A Finite Element Study Of Precast Prestressed Concrete Circular Tanks Subject To Elevated Temperatures, Michael Minehane

Theses

The current study investigates the influence of heated water storage, upward of 95°C, on precast prestressed concrete circular tanks. Modem design standards for liquid- retaining concrete structures stipulate that thermal effects are to be considered for the serviceability limit state. They are also to be considered for the ultimate limit state when deemed significant. The standards, however, do not provide guidance for the analysis of such effects. Research in this area is also limited and exclusively concerned with ambient thermal conditions, with a maximum temperature of 30 °C in any instance.

A finite element study incorporating thermo-mechanical coupling investigates the …

Design Of A Centralised Anaerobic Digestion Plant In Ireland., Diarmuid O'Meara

Theses

Climate change is brought about by greenhouse gases emitted to the earth’s atmosphere by fossil fuels. Renewable energy sources are seen as an alternative to fossil fuels. Examples of renewable energy sources are biofuels which are a method of reducing the emission of greenhouse gases. One form of biofuels is biogas that is produced during the anaerobic digestion process. In this thesis pig slurry is used to produce biogas.

In this project, the optimum design process for a centralised anaerobic digestion plant was established in the literature review, The optimum process for anaerobic digestion plant design in Ireland was investigated. …

Feasibility Report On Use Of Anchored Gravity Bases For Offshore Wind Turbines, Anthony Hayes

Theses

In recent years, the demand for renewable energy in Europe has been rising substantially, as a result of statutory demands put in place by the European Union. It is expected that a relatively large proportion of future renewable electricity will be supplied by offshore wind farms. The offshore wind industry is currently attempting to design and evaluate cost effective foundation systems suitable for water depths greater than 30m. There is also a drive to reduce foundation costs for offshore wind turbines at present. This project is a preliminary feasibility report on an anchored gravity base foundation concept for deployment at …

Scenario Generation And Climate Change Modelling Of Nitrous Oxide Emissions From Grasslands In Ireland, Mark Cochrane

Theses

Described as a two-year study in relation to nitrous oxide emissions from agricultural grassland in the Republic of Ireland under a set or climate and environmental policy scenarios. Nitrous oxide is a greenhouse gas, with a global warning potential approximately three hundred times that or carbon dioxide. lt is required under the Kyoto Protocol that national inventories or all greenhouse gas emissions are established. The Intergovernmental Panel on Climate Change (IPCC) Tier approach is designed to establish current inventories of greenhouse gas emissions; however a scenario approach is also employed in order to estimate emissions in future years. Scenario sets …

The Optimum Energy Crop In Ireland For Biofuel, Eoin Deasy

Theses

The motivation for this research stems from the potential of biofuels to assist Ireland in meeting obligations outlined in the 'Renewable Energy Source Directive' (2009/28/EC) and to reduce dependency on fossil fuels. The purpose of this work is to establish the merits of biofuel production Ireland ,with a keen focus on the technical, economic and environmental aspects of each. The three biofuel options investigated are biodiesel, bioethanol and biomethane. Eight crop varieties were investigated, these include; wheat, oats, barley, OSR, maize silage, sugar beet, grass silage and potatoes. The approach taken within this thesis was to perform a life cycle …

Geotechnical, Environmental And Regulatory Aspects Of Brownfield Development, Martin Casey

Theses

Brownfield sites are a common feature of the urban landscape, have significant development potential and when remediated are the catalysts for urban regeneration. However, site specific information regarding geotechnical and environmental aspects of the site, including regulatory issues are needed in terms of bringing the land back into beneficial use. This research project discusses current Irish practice and regulation in respect of brownfield development. A comparison is made between Ireland, the United Kingdom, and the European Union in this regard. A review of all available literature indicates a number of shortcomings in respect of the geotechnical, environmental and regulatory aspects …

Material And Energy Flow Analysis Of The Irish Construction Sector, Rachel Woodward

Theses

A national flow model for concrete was developed using the framework of material and energy flow analysis. Using this framework, the Irish concrete material and energy cycles for the year 2007 were constructed by firstly analysing the material life cycle of concrete which consists of the three phases of production (including extraction of raw materials and manufacture of cement), usage into stock (ready-mix and other concrete products), and waste management. In this year, approximately 35Mt of raw materials were extracted to produce both 5Mt of cement and 33Mt of concrete, with 4.5Mt of cement going into the production of concrete. …

Design Of A Smart System For Monitoring Concrete Curing And Structural Health, William Quinn

Theses

Structural Health Monitoring (SHM) is a rapidly growing sector of the construction industry. Automated monitoring methods arc mainly limited to global monitoring and the application of local monitoring methods has not gained widespread application due to the fact that currently technology requires that the systems are wired to data acquisition devices. This thesis presents a fully embeddable wireless sensor node for the local monitoring of structural concrete. It presents the first reported wireless embedded system implementation of the electromechanical impedance method using both resonant and antiresonant sensors for this purpose.

The first section of this thesis examines the feasibility of …

Rubble-Mound Structure Design In The Coastal Environment, Jack Murphy

Theses

The main aims of this thesis were to investigate the main aspects of the design and implementation of rubble-mound structures as a form of shoreline stabilisation and coastal defence. An emphasis has been placed on the Irish context of how these structures have been implemented in the past. The intention was that this work would improve the understanding of the use of these structures for future projects both in Ireland and internationally.

This work required a literature review which investigated the general aspects of rubble-mound structures, the coastal environment, and the theory of designing the structures’ layout, cross-section and impact …

Semi-Rigid Steelwork Connections, Conor Murphy

Theses

This thesis sets out to assess the stiffiiess of typical fin plate steelwork connections. The classification of joints as pinned, semi-rigid or fixed is described and the different models of moment-rotation relationship are explained. Eurocode treatment of steelwork connections is assessed with particular emphasis on joint stiffness. Procedures for the design of fin plate connections are set out and an example presented and a spreadsheet developed. Tests on a number of fin plate connections were carried out in the Heavy Structures Laboratory, to determine the moment rotation characteristics. The finite element software LUSAS was used to analyse the fin plate …

Monitoring And Improving The Effectiveness Of Quality Control And Quality Assurance In Road Construction At Al-Ain Municipality, Mohammed Muftah Sultan Al Aryani

Theses

A good roads network has an important bearing on the economic growth of the country. Construction of quality roads, which is considered a primary objective of any highway agencies and contractors, requires concerted efforts on many fronts. Over the past several years, agencies have been working with the construction industry to implement Quality Assurance/Quality Control activities (QA/QC) in an effort to improve the quality of highway construction. They are used as a mean to describe the materials, workmanship, and other general requirements for the project that the highway agencies expect from the contractors. Good specifications should be easy to understand …

A Study Of The Economical Feasibility Of Installing Heating, Ventilation, And Air-Conditioning Condensate Recovery System, Rafid M. Kully

Theses

The objective of this study is to establish a guide line or an analytical frame work to predetermine the economic benefits associated with the installation of Heating, Ventilation, and Air-Conditioning (HVAC) condensate recovery systems to capture the air-handler’s condensate water and use it as makeup water for the cooling tower. Some factors should be considered such as; the location, building operation, amount of outside air required, type of energy recovery system, and indoor conditions setup. Experimental data was used from Emory University in Georgia, where a condensate recovery system was installed and the condensate water from four air-handler units at …

Performance Of Reinforced Concrete Columns Strengthened With Fiber Reinforced Polymers Under Various Loading Conditions, Mohamed Gamal Mohamed El Sayed

Theses

Strengthening of reinforced concrete (RC) structures with Carbon Fiber Reinforced Polymer (CFRP) composites has been a popular subject that attracted considerable attention from researchers for the last two decades. The high specific strength, stiffness, environmental resistance, and ease of application make CFRP composites highly desirable for strengthening and rehabilitation of RC structural components.

For concentrically loaded RC members with a circular cross-section, the lateral CFRP-confinement of concrete results in a substantial increase in load capacity and ductility. CFRP-confinement is less effective for RC compression members with square and rectangular cross-sections due to stress concentration at the corners and lack of …

Evaluation Of The Effectiveness Of Speed Cameras On Road Safety In The Emirate Of Abu Dhabi Roads, Ali Humaid Ai Darei

Theses

The problem of road safety in the Emirate of Abu Dhabi is eminent. According road crash data from the Ministry of Interior, from 1999 to 2007 the average percentage of deaths due to road crashes in the Emirate of Abu Dhabi was 42 percent of the whole UAE. The high death rate due to road crashes has enormous economic and financial loss to the Emirate. The previous research on road safety in the UAE reported that the aberrant driving behavior is one of the major causes for road crashes in the UAE. The aberrant driving behavior includes careless driving, speeding, …

Structural Behaviour And Analysis Of A Steel-Concrete Balcony Bracket, Sean Carroll

Theses

For commonly used moment connections, such as the various types of beam to column endplates, a large amount of information in relation to testing data and suggested design methods exist. Engineers can use this information to safely design such connections. When developing new and unique types of connections however, usually no prior testing information is available to engineers due to the unique design. At the present time, the most effective method of designing and developing any structural element or connection is through testing. Testing and detailed analysis of the results gives factual information on the behaviour of the structure, which …

Sediment Budgets In The Irish Estuarine Environment, Kevin Motherway

Theses

A sediment budget is the quantification of sediment sources and sinks for natural physical systems such as rivers and estuaries.

This thesis has developed estuarine sediment budgets for Cork Harbour, Kinsale Harbour and Youghal Harbour. The thesis includes a literature review of the properties of sediment, river and estuary related sediment transport, sediment management and sediment related legislation and the approaches used to develop a sediment budget for an estuary system.

An extensive study of riverine suspended sediments discharging to the estuaries has been undertaken. Both surface grab samples and depth integrating suspended sediment samples were collected, tested and analysed. …

Feasibility Of Utilising Construction And Demolition Waste And Dredge Material As Landflll Liner, John David Riordan

Theses

Construction and demolition (C&D) waste and dredge material are significant bulk waste streams in the Republic of Ireland. This thesis examines the feasibility of combining these waste streams to produce a viable novel geotechnical clay liner for landfill.

This thesis includes a literature review and a detailed study of C&D waste, dredge material and landfill liners in Ireland. The research for this thesis includes a geotechnical laboratory test programme. Samples of C&D waste and dredge material were collected and tested to establish relevant characteristics. In addition, a senes of tests were commissioned on test samples to establish their chemical and …

The Potential For Ch4-Enriched Biogas As A Transport Fuel In Ireland, Niamh Power

Theses

Ireland needs a biofuel industry- to aid compliance with the Kyoto Protocol, the Biofuels Directive and to secure its energ>' supply. The overall aim of this work is to assess the potential of CH4-enriched biogas as a transport fuel in Ireland. Biogas is produced during the anaerobic digestion of biomass. This work investigates biogas production from two different feedstocks; biodegradable municipal waste and agricultural crops. To assess the potential for biogas as a transport fuel the alternatives to biogas are investigated and compared. Thus digestion and composting of biodegradable municipal waste, and biogas and ethanol production from agricultural crops …

Sediment Transport In Rivers And Estuaries, John Clancy

Theses

The processes of erosion, transportation and sedimentation in rivers and estuaries have fascinated researchers for centuries. These processes have been active throughout geological time and have shaped the present landscape. To effectively study these processes analysis needs to be carried out at catchment scale level. Cork Harbour and its tributaries including the River Lee, the Owenabue River, the Glashaboy River, the Owennacurra River, and the Dungoumey River are analysed for the processes of sediment transport within their catchments and systems, and particularly river sediment loadings.

This thesis includes a literature review of the properties of sediment, river and estuary related …

Dredging And Dredge Disposal And Reuse In Ireland, Séamus Sutton

Theses

Dredging involves raising material from a river or estuary bed to the surface and transporting it some distance for disposal or reuse. It may be required to improve navigational access, to allow for port development or for mining aggregates.

This thesis includes a literature review and a detailed study of the dredging industry in Ireland. This study is partly based on a nationwide survey undertaken on dredging and dredge disposal and reuse, the results of which are included in a dredging database created for this project. All the main stakeholders in the industry were invited to complete questionnaire forms for …

Numerical Modelling Of Sediments In Cork Harbour, Jérémy Pingon

Theses

In recent years there have been considerable developments in the new and emerging field of hydroinformatics. This relatively new discipline is concerned with the application of computer and networking technology for the planning, management and protection of water bodies.

Environmental issues in estuaries require accurate and detailed knowledge of cohesive sediment transport processes to assess different issues including water quality, pollutant dispersion, and dredging and maintenance of navigation channels.

This thesis presents a review of the main sediment properties and processes required for modelling the behaviour and transport of sediments. It also introduces a new approach to sediment properties using …

Issues Of Seismic Response And Retrofit For Critical Substation Equipment, Seyed Ali Hashemi Nezhad Ashrafi

Theses

This study focuses on means to reduce the seismic hazard for transformer-bushing systems and different issues of the response and rehabilitation of transformers. The primary means of seismic mitigation investigated is the use of the Friction Pendulum System (FPS) bearings to seismically isolate transformers. This is done by developing a finite element model representing the behavior of FPS bearings and implementing this model on to ADINA finite element package for further use in analytical studies. This model is used to study the behavior of isolated primary-secondary systems and the effects of parameters like different FPS radii or vertical excitations. Also …

The Consolidation Analysis Of A Clay Layer In The City Of Belem Do Para, Brazil, John Bezerra Jr.

Theses

In this study, an analysis was done on a particular clay layer found in the city of Belem do Para, Brazil. Various soil tests were conducted including a consolidation analysis. Data were gathered and analyzed in order to obtain a better understanding of how the soil responds under certain loading conditions. There have been no previous studies done on this material and so when it has been encountered in the field geotechnical engineers provide the safest, but not necessarily best design method possible. In the case of large buildings, piles are driven past this material to competent sand. There have …

Shape Finding Of Fabric Structures Using Grid Method, Armin Bischof

Theses

Fabric structures can span large distances with a very low self-weight, which makes them very efficient for covering huge areas. They have attractive shapes and an appealing architecture. These properties make them very popular and they are used in many different kinds of buildings. Airports, stadiums and halls are typical examples where the use fabric structures is often recommendable.

Fabric structures are built mainly out of fabric and cables; two structural members that can only take tension stresses. Therefore these structural members must be prestressed in such a way that their shape can carry all loads that might affect the …

Optimization Of Very Early Strength Concrete Mixes Using Maturity Method, Sun Punurai

Theses

Fast track concrete technology has been used over the past two decades for overnight highway repairs. Originally, fast track was concerned only with rapid strength gain and workability but little concern was paid to cost and durability of the concrete.

The purpose of this research study is to develop a current improved very early strength (VES) concrete mix, which was accepted by NJDOT in 1996. More than 50 concrete mixes were evaluated for strength, shrinkage, and curing rate (maturity), eventually leading to the development of an optimized VES concrete mix with improved performance characteristics.

The study has developed the new …

Hydrological And Geotechnical Investigation Of A Sparta, New Jersey Landslide, James Talerico

Theses

On August 13, 2000, a massive landslide occurred in Northern New Jersey following an extreme rainfall event during which 14.1 inches of precipitation fell locally during a 24-hour period. The slide, with an estimated volume of 22,000ft³, traveled up to 1,500ft in a short period. While landslides do occasionally occur along the coastal bluffs of the Atlantic Coastal Plain, slides of this magnitude are uncommon in the glacial soils of the New Jersey Highland section.

The investigation of this landslide was compiled through rainfall data and geotechnical data, which was used to determine the triggering mechanism of the …

The Behaviour Of Long-Span Reinforced Concrete Beams Under Various Loading Conditions., Ciaran O'Leary

Theses

The relative ease of design and construction of simple reinforced concrete beams provides an attractive option for structural engineering designers. However, where longer spans are involved it is more likely that prestressed concrete or possibly some form of steel beams will be preferred.

The primary cause of failure of longer span reinforced concrete beams is likely to be bending. However, the excessive deflection that might be associated with such beams must also be considered. When designing these beams, structural engineers make considerable use of span/effective depth ratios to select trial sections and check deflection limits. Such ratios are provided in …

Probability Of A Hazardous Material Truck Accident In New Jersey, Mahesh Damodaran

Theses

Accident prediction modeling is a powerful tool for determining the frequency of accidents under certain circumstances. Nationwide, direct damages from highway hazardous material spills for the year 2000 were tallied at over $31billion. This thesis determines the probability of an accident involving hazardous materials on the roads of New Jersey. The methodology is based on a British predictive equation used by their Highways Agency to determine the probability of a hazardous spill over a section of a roadway. The parameters used by the British's Highways Agency, which is obtained from their accident data, were modified to reflect conditions that best …

Impact Of Truck Regulation And 65mph Speed Limit On Truck Accidents In New Jersey, Rajat G. Rajbhandari

Theses

The state of New Jersey enacted two regulations with significant importance to the highway operations: 65 mph speed limit and truck restriction on the National Network. The speed limit of 65mph was used on limited sections of interstate system highways with an objective to reduce energy consumption by vehicles and truck restriction was used on the interstate system and other state highway system to reduce large truck accidents and thereby increase truck safety. In this research, the safety impacts of these two regulations on truck crashes were studied.

The research focused on monthly truck crashes along the highway sections where …