Open Access. Powered by Scholars. Published by Universities.®

Civil and Environmental Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Purdue University

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 661 - 690 of 2550

Full-Text Articles in Civil and Environmental Engineering

Rapid Drying Concrete, Purdue Ect Team Aug 2015

Rapid Drying Concrete, Purdue Ect Team

ECT Fact Sheets Archive

One of the essential problems that are faced during construction is the drying of concrete and the presence of moisture which affects floor coverings that need to be placed. The rapid-drying characteristic in Aridusâ concrete allows for the quick reduction of moisture vapor that travels through the concrete pores of the concrete.

Go to article

Ap Alternatives Modular Solar Racking, Purdue Ect Team Aug 2015

Ap Alternatives Modular Solar Racking, Purdue Ect Team

ECT Fact Sheets Archive

Solar panels have been used to generate and supply electricity in various applications such as residential and commercial buildings. Therefore, a need for a quicker approach to installation as well as the need to reduce workmanship to speed up the process is needed. Solar racks are developed through the use of automated equipment to “preassemble the racking hardware, pre-install the solar modules, and drive helical anchors into the ground rapidly”. So instead of installing one panel at a time, AP Alternatives has created a new method that uses machines to make the process easier. This new automation of the installation …

Go to article

3d Printing For Bricks, Purdue Ect Team Aug 2015

3d Printing For Bricks, Purdue Ect Team

ECT Fact Sheets Archive

Building Bytes, by Brian Peters, is a project that uses desktop 3D printers to print bricks for architecture. Instead of using an expensive custom-made printer, it uses a normal standard 3D printer which is available for everyone and makes it more accessible and also easier for fabrication.

Go to article

Phase Transforming Cellular Materials (Pxcms) Design And Assembly, Nadia N. Aljabi, Pablo Zavattieri, David Restrepo Aug 2015

Phase Transforming Cellular Materials (Pxcms) Design And Assembly, Nadia N. Aljabi, Pablo Zavattieri, David Restrepo

The Summer Undergraduate Research Fellowship (SURF) Symposium

We introduce a new class of phase transforming cellular materials (PXCMs) based on locally bistable or metastable unit cells that form periodic microstructures, where the thermomechanical behavior of each unit cell exhibits snap-through type behavior. We propose to explore the capabilities of these new materials to improve structural resistance to damage caused by natural hazards including PXCM in structural members. The main benefits of this material are that it can absorb energy and is reusable. During the first part of this work, a fabrication method for PXCMs based on the assembly material slotted stripes was explored. The 1D unit cell …

Go to article

Role Of Soil Parameters On Loading Of Buried Structures, Xiao Zhang, Mark D. Bowman, Rafael R. Armendariz Briones Aug 2015

Role Of Soil Parameters On Loading Of Buried Structures, Xiao Zhang, Mark D. Bowman, Rafael R. Armendariz Briones

The Summer Undergraduate Research Fellowship (SURF) Symposium

Load rating is the process to evaluate and explore the structural capacity of bridges as much as possible within safety range. As a balance between economy and safety, proper load ratings save money and keep public safe. Knowing the contribution and interaction of each different soil parameter on the loading can significantly reduce the amount of work when load rating those structures. However, for buried structures without plans, such contribution or interaction is never known. This parametric study explores how much each soil parameter of three types of soils can affect the loading of buried structures without plans. An existing …

Go to article

Straining Definitions, William Pollalis, Santiago Pujol Aug 2015

Straining Definitions, William Pollalis, Santiago Pujol

The Summer Undergraduate Research Fellowship (SURF) Symposium

The concept of strain is ubiquitous in engineering textbooks. It is defined early in engineering education as change in length divided by initial length, and is used to quantify deformations due to things like stresses and temperature changes. The concept itself is quite straightforward and represents homogenous materials well, but homogenous materials are rarely present in engineering design. Composite materials such reinforced concrete cannot be simply defined, as their properties are heavily influenced by their non-uniformity. For example, there are large deformations around tensile cracks in reinforced concrete, where the reinforcement withstands all the tensile stress, and little deformation in …

Go to article

Seismic Vulnerability Assessment Of Low-Rise Reinforced Concrete Buildings In Kathmandu, Nepal, Prateek Pratap Shah, Santiago Pujol Aug 2015

Seismic Vulnerability Assessment Of Low-Rise Reinforced Concrete Buildings In Kathmandu, Nepal, Prateek Pratap Shah, Santiago Pujol

The Summer Undergraduate Research Fellowship (SURF) Symposium

In seismically active cities like Kathmandu, there often exists a need to assess the seismic vulnerability of a large number of poorly designed buildings within a short period of time. Traditional analysis techniques do not work because they require building data that are either inaccurate or unavailable. One alternative to traditional analysis techniques is to use simple correlations like the Priority Index. This index uses basic building information such as floor area, column area, and wall area to estimate the seismic vulnerability of a building. Following the 2015 Nepal earthquake, 146 low-rise reinforced concrete buildings were surveyed in Kathmandu, Nepal. …

Go to article

Recovery Of Nutrients From Animal And Human Wastes, Nathaniel E. Kallmyer, Zhe Sun, Kaitlin Harris, Zhi Zhou, Ernest R. Blatchley Iii Aug 2015

Recovery Of Nutrients From Animal And Human Wastes, Nathaniel E. Kallmyer, Zhe Sun, Kaitlin Harris, Zhi Zhou, Ernest R. Blatchley Iii

The Summer Undergraduate Research Fellowship (SURF) Symposium

Removal of nitrogen- and phosphorus-containing molecules from wastewater is necessary to prevent excessive growth of algae and resulting chemical changes to bodies of water. Of wastewater components, urine contains relatively high concentrations of nitrogen and phosphorus, the majority of which is ultimately present as ammonia and phosphate. Separation and stabilization of these nutrients may also allow for their reuse as fertilizer. Before the nutrients may be stored, they must be stabilized. At least a portion of ammonia-N must be converted to nonvolatile nitrogen. This may be achieved by using ammonia- and nitrite-oxidizing bacteria (AOB and NOB, respectively) to convert ammonia …

Go to article

Influence Of Warping On Stress For Restrained Concrete Slabs: For Application To Crcp, Corey M. Beck, W. Jason Weiss, Nathan T. Todd Aug 2015

Influence Of Warping On Stress For Restrained Concrete Slabs: For Application To Crcp, Corey M. Beck, W. Jason Weiss, Nathan T. Todd

The Summer Undergraduate Research Fellowship (SURF) Symposium

Continuously-reinforced concrete pavement (CRCP) is widely used in transportation system because of its low maintenance requirement. However, the need for large volumes of steel creates a high cost for new construction. The Illinois Tollway is preparing to substantially renovate highways in and around Chicago and this work seeks to understand how concretes of varying mixture designs can be made thinner by reducing the amount of built-in stress. The experiment examines warping in beams subjected to various degrees of restraint, in an effort to assess effectiveness at reducing warping in continuously reinforced concrete pavements. Value added methodologies such as internal curing …

Go to article

Examining The Hydration And Mechanical Properties Of Cement Paste Containing Cellulose Nanocrystals, Yvette Valadez-Carranza, Charles Y. Chiu, W. Jason Weiss, Pablo Zavattieri, Jeffrey P. Youngblood Aug 2015

Examining The Hydration And Mechanical Properties Of Cement Paste Containing Cellulose Nanocrystals, Yvette Valadez-Carranza, Charles Y. Chiu, W. Jason Weiss, Pablo Zavattieri, Jeffrey P. Youngblood

The Summer Undergraduate Research Fellowship (SURF) Symposium

Cellulose nanocrystals (CNCs) are a nano-scaled particulae material that has been shown to improve strength in cementitious pastes. One advantage of CNCs compared to other nano-materials is that CNCs are renewable and sustainable. The objective of this investigation is to investigate the influence of additional alkali content on the behavior of CNCs in cement paste. This work evaluates flexural and compressive strength as a function of heat of hydration—which measures the extent of reaction. Previous mechanical tests on cement paste containing cellulose nanocrystals (CNCs) have shown CNCs to improve the flexural strength of cement paste by approximately 30%. Isothermal calorimetry …

Go to article

Membrane Pre-Treatment Using Chemical Disinfectants In Halide Impaired Waters, Holly M. Haflich, Kun Huang, Amisha D. Shah, John Howarter, Logan Kearney Aug 2015

Membrane Pre-Treatment Using Chemical Disinfectants In Halide Impaired Waters, Holly M. Haflich, Kun Huang, Amisha D. Shah, John Howarter, Logan Kearney

The Summer Undergraduate Research Fellowship (SURF) Symposium

The use of membrane filtration processes for desalination, water reuse, and water reclamation techniques are becoming more prevalent given freshwater shortages. However, the treatment of these waters is challenging because of the membranes used in these processes. During nanofiltration and reverse osmosis the membranes undergo biofouling. Reverse osmosis and nanofiltration are high-pressure membrane filtration techniques that treat seawater, brackish waters, and industrial wastewaters. Because of the biofouling, the polyamide thin film needs to be pretreated with chlorine (HOCl/ OCl-) as a disinfectant, but this damages the polyamide membrane. When the free chlorine is in the presence of halide-impaired waters, it …

Go to article

Approach To Increasing Indiana Rural Road Safety On Intersections, Ammanuiel A. Kebede, John E. Haddock Aug 2015

Approach To Increasing Indiana Rural Road Safety On Intersections, Ammanuiel A. Kebede, John E. Haddock

The Summer Undergraduate Research Fellowship (SURF) Symposium

In 2009, there were more than 17,000 reported fatal crashes in rural areas of United States which accounted 56 percent of total fatal crashes. This number has not declined in a significant amount since 2009. Studies are undergoing on these rural area roadways, including intersections, to identify the major causes and take the necessary countermeasure. By using previous intersection related fatal and injury crash data, it is possible to identify high-risk intersections to point out and make the appropriate improvement. Five year fatal and injury crash data was collected (2008-2012) for three Indiana rural counties that had the highest frequency …

Go to article

Chemical Modification Of Uniform Soils And Soils With High/Low Plasticity Index, Xuanchi Li, Fei Tao, Antonio Bobet Aug 2015

Chemical Modification Of Uniform Soils And Soils With High/Low Plasticity Index, Xuanchi Li, Fei Tao, Antonio Bobet

The Summer Undergraduate Research Fellowship (SURF) Symposium

Lime and/or cement are used to treat weak subgrade soils during construction of highways. These chemicals are mixed with the soil to improve its workability, compactability and engineering properties. INDOT (Indiana Department of Transportation) has been using chemical modification of native soils for the past 20 years. In fact, 90% of current subgrade is treated, typically with quick lime, lime byproducts or cement. For pavement design, it is customary to not include any improvement of the subgrade for the design of the pavement layers. Recent research completed through JTRP (Joint Transportation Research Program) recommends a higher stiffness modulus for chemically …

Go to article

Seismic In-Plane Response Of Reinforced Concrete Frames With Masonry Infill Walls, Rabab Abdel Karim Al Louzi Apr 2015

Seismic In-Plane Response Of Reinforced Concrete Frames With Masonry Infill Walls, Rabab Abdel Karim Al Louzi

Open Access Dissertations

Field data gathered after destructive earthquakes indicate that infill walls interact with reinforced concrete (RC) frames in buildings during an earthquake and could cause failure mechanism different than what the frames are originally designed for. A new method to identify the failure modes of RC frames with infill walls is developed. The method requires only the simple geometric and material properties of the elements involved in the frame- wall assembly. The approach checks various possible failure mechanisms, including those that may evolve depending on how the infill wall may fail during strong shaking, for example, the dynamically evolved captive column …

Go to article

The Effect Of Maximum Aggregate Size On The Shear Strength Of Geometrically Scaled Reinforced Concrete Beams, Derek Robert Daluga Apr 2015

The Effect Of Maximum Aggregate Size On The Shear Strength Of Geometrically Scaled Reinforced Concrete Beams, Derek Robert Daluga

Open Access Theses

Shear strength of reinforced concrete beams without web reinforcement has been reported to decrease with increases in depth. This is often referred to as a size effect. This reduction in shear strength has been reported to decrease with the use of web reinforcement and increases in maximum aggregate size. ^ The purpose of this study was to test two hypotheses 1) shear strength increases with increases in maximum aggregate size and 2) aggregate gradation affects this increase in shear strength. Maximum aggregate size is defined here as the size of the smallest sieve opening through which all aggregate particles pass. …

Go to article

Development And Application Of Quantitative Methods For Ecosystem Services, Rebecca A. Logsdon Apr 2015

Development And Application Of Quantitative Methods For Ecosystem Services, Rebecca A. Logsdon

Open Access Dissertations

Ecosystem services are benefits that people receive from the environment. Despite recent exponential increases in ecosystem service research, the ecosystem service framework has made little impact on policy and land management decisions, especially in the United States. Two of the main limitations for a lack of ecosystem service considerations in both policy and land management decisions are a need for more advanced quantification methods and the lack of engagement of key stakeholders who are responsible for making land management decisions. This research seeks to address these two limitations by testing and improving quantification methods of ecosystem services and by evaluating …

Go to article

Spatial Analysis Of Passenger Vehicle Use And Ownership And Its Impact On The Sustainability Of Highway Infrastructure Funding, Matthew Volovski Apr 2015

Spatial Analysis Of Passenger Vehicle Use And Ownership And Its Impact On The Sustainability Of Highway Infrastructure Funding, Matthew Volovski

Open Access Dissertations

Across the United States, the sustainability of highway funding is at risk due to increasing need and uncertainty in the factors that drive revenue. Past studies on highway funding sustainability have identified that the root cause of changing highway revenue are the shifts in social demographics and economic characteristics. Unfortunately, from the revenue perspective (the focus of this dissertation), the ability of previous research to account for these factors has been rather limited in two ways; first, the inability to accurately assess current regional vehicle use (a typical prerequisite for statistical modeling of highway revenues) due to difficulties associated with …

Go to article

A Probabilistic Model Of Benefit-Cost Analysis For Highway Construction Projects, Yue He Apr 2015

A Probabilistic Model Of Benefit-Cost Analysis For Highway Construction Projects, Yue He

Open Access Theses

Deterministic method occupies the predominant position in economic analysis. However, by using a single value to estimate the project value, deterministic method would hide the risk under it. Analysts may make incorrect judgments by looking at a value without knowing the likelihood of its occurrence and the consequences of its occurrence. A probabilistic model was developed in this study to address this problem. It was found in this study that the traffic flows on Indiana highways follow logistic distributions rather than normal distributions as generally believed. The application of the probabilistic model was illustrated through a case study. The results …

Go to article

Numerical Characterization Of Convective Heat Transfer Of Low-Rise Buildings, Ranchi Chen Apr 2015

Numerical Characterization Of Convective Heat Transfer Of Low-Rise Buildings, Ranchi Chen

Open Access Theses

The convective heat transfer coefficient (CHTC) is an important parameter to evaluate the efficiency of building-integrated photovoltaic/Thermal (PV/T) system and the energy exchange within the turbulent atmospheric boundary layer. Reynolds-average Navier-Stokes approach has been frequently used to predict the CHTC at the surface of low rise roof but incapable of predicting transient behavior of separation, reattachment and recirculation both on the windward and leeward surface. However, Large Eddy Simulation approach (LES) could provide accurate flow field and temperature field around the low rise building. ^ The current study uses Large Eddy Simulation with Smagorinsky-Lily model and the Shear Stress Transport …

Go to article

Low Income, Supermarket Accessibility, And The Transportation Network: A Multimodal Analysis Identifying Areas Of Poor Accessibility And Intervention Strategies In Indianapolis, Indiana, Andrea Leigh Bailey Apr 2015

Low Income, Supermarket Accessibility, And The Transportation Network: A Multimodal Analysis Identifying Areas Of Poor Accessibility And Intervention Strategies In Indianapolis, Indiana, Andrea Leigh Bailey

Open Access Theses

The United States Department of Agriculture (USDA) Economic Research Service estimates that 23.5 million people live in food deserts, over half of which are considered low-income residents. Accurately defining a food desert is crucial as the designated areas can benefit from grant opportunities and funding priority. To qualify as an urban food desert, the USDA requires that at least 500 residents or one-third of the population live outside a one-mile buffer from a supermarket as well as have a median income of less than 80% of the area average or a poverty rate of greater than 20%. Approaches in the …

Go to article

Quantifying Moisture Transport In Cementitious Materials Using Neutron Radiography, Catherine L. Lucero Apr 2015

Quantifying Moisture Transport In Cementitious Materials Using Neutron Radiography, Catherine L. Lucero

Open Access Theses

A portion of the concrete pavements in the US have recently been observed to have premature joint deterioration. This damage is caused in part by the ingress of fluids, like water, salt water, or deicing salts. The ingress of these fluids can damage concrete when they freeze and expand or can react with the cementitious matrix causing damage. To determine the quality of concrete for assessing potential service life it is often necessary to measure the rate of fluid ingress, or sorptivity. Neutron imaging is a powerful method for quantifying fluid penetration since it can describe where water has penetrated, …

Go to article

Examining Unawareness Of Construction Law Principles From A Small Contractor's Perspective, Ketaki Shiralkar Apr 2015

Examining Unawareness Of Construction Law Principles From A Small Contractor's Perspective, Ketaki Shiralkar

Open Access Theses

Construction industry encompasses myriads of small trades within itself. If we take a microscope and observe, what looks from outside as one big single unit, is in fact made up of many small cogs of a wheel, important ones though, as without them, the functionality of the industry wouldn't be proper. As much as the existence of these small scale contractor's companies is important, so is their survival. There have been many reasons as to why contractors fail, but this study is limited to focus on one of them, which is, the absence of legal knowledge among employees of a …

Go to article

Investigation Of Industry Perceptions Of Building Information Modeling (Bim)-Based Estimating Practices In The U.S. And China, Zhihang Yi Apr 2015

Investigation Of Industry Perceptions Of Building Information Modeling (Bim)-Based Estimating Practices In The U.S. And China, Zhihang Yi

Open Access Theses

While the Building Information Modeling (BIM) technology has been seen as next revolutionary technology for the Architectural, Engineering, Construction and Facility Management (AEC/FM) fields, the AEC/FM industry does not implement BIM technology on the cost estimating practices as widely as expected. The efficiency improvement on cost estimating with BIM could be accomplished through automating quantity take-offs, closely collaborating design with the estimating professionals and so on. This research explores the advantages and barriers of imbedding BIM technology into the estimating practices which enables the industry deepen their understandings on BIM-based cost estimation method. This study also compares the industry perceptions …

Go to article

Four Runway Configuration Types And Their Relation To Arrival Delays, Rachel Jayne Kennedy Apr 2015

Four Runway Configuration Types And Their Relation To Arrival Delays, Rachel Jayne Kennedy

Open Access Theses

Aside from a safe flight, airline passengers expect to arrive to their destination on time. With an abundance of flights in the United States arriving late each day, it has yet to be determined if the airport's layout plays a role. This research looks at four common runway configuration types at hub and non-hub airports to determine if runway configurations affect arrival delays. A two-way ANOVA is conducted comparing the means of the on-time arrival percentage between airports exhibiting each of the four runway configurations as well as hub and non-hub airport status. The results determine if any or none …

Go to article

Downward Model Development Of The Soil Moisture Accounting Loss Method In Hec-Hms: Revelations Concerning The Soil Profile, Jessica Holberg Apr 2015

Downward Model Development Of The Soil Moisture Accounting Loss Method In Hec-Hms: Revelations Concerning The Soil Profile, Jessica Holberg

Open Access Theses

Despite the fact that the soil profile is known to impact streamflow, most Curve Number (CN)-based models ignore subsurface processes. This study explores the influence of soil storage on peak flows. Two watersheds in flat, humid west-central Indiana were modeled using both the Natural Resources Conservation Service (NRCS) Curve Number and four versions of the Soil Moisture Accounting (SMA) loss methods in the United States Army Core of Engineers-developed (USACE) Hydrologic Engineering Center Hydrologic Modeling System (HEC-HMS). One watershed encompasses the Wabash and Tippecanoe Rivers' confluence; the other contains an ephemeral stream, Plum Creek. The CN-based model was developed using …

Go to article

An Integrated System Of Vapor-Compression Chiller And Absorption Heat Pump: Experiment, Modeling, And Energy And Economic Evaluation, Yi-Shu Kung Apr 2015

An Integrated System Of Vapor-Compression Chiller And Absorption Heat Pump: Experiment, Modeling, And Energy And Economic Evaluation, Yi-Shu Kung

Open Access Dissertations

Buildings currently consume 41% of the primary energy in the United States. Among the 41% primary energy, approximate 50% are used for building heating, cooling, and water heating. Improving the efficiencies of the devices for building heating and cooling has potentials to reducing the energy consumptions. This research aims to find one solution for building energy efficiency through investigating an Integrated System of an Integrated Compression-Absorption Subcooling System (ICASS) Based upon the principle of subcooling effect, the ICASS can improve the efficiency of the cooling device but also achieve additional useful heating sources potentially used for space heating and domestic …

Go to article

Improvement Of Simulating Bmps And Lid Practices In L-Thia-Lid Model, Yaoze Liu Apr 2015

Improvement Of Simulating Bmps And Lid Practices In L-Thia-Lid Model, Yaoze Liu

Open Access Dissertations

Best management practices (BMPs) and low impact development (LID) practices are popular approaches used to reduce the negative impacts of urbanization on hydrology and water quality. To assist planners and decision-makers in urban development projects, user-friendly tools are needed to assess the effectiveness of BMPs and LID practices on water quantity and quality. To address this need, the Long-Term Hydrologic Impact Assessment-LID (L-THIA-LID) model was enhanced with additional commonly used BMPs and LID practices represented in the model, improved approaches to estimate hydrology and water quality, and representation of practices in series. The tool was used to evaluate the performance …

Go to article

Algorithms For Bundling And Pricing Trucking Services: Deterministic And Stochastic Approaches, Rodrigo Mesa-Arango Apr 2015

Algorithms For Bundling And Pricing Trucking Services: Deterministic And Stochastic Approaches, Rodrigo Mesa-Arango

Open Access Dissertations

Bundling and pricing trucking services is an important strategic decision for carriers. This is helpful when they consider the incorporation of new businesses to their networks, look for economic and optimal operations, and develop revenue management strategies. Reverse combinatorial auctions for trucking services are real-world examples that illustrate the necessity of such strategies. In these auctions, a shipper asks carriers for quotes to serve combinations of lanes and the carriers have to bundle demand and price it properly. This dissertation explores several dimensions of the problem employing state-of-the-art analytical tools. These dimensions include: Truckload (TL) and less-than-truckload (LTL) operations, behavioral …

Go to article

Distributed Real-Time Hybrid Simulation: Modeling, Development And Experimental Validation, Ali Irmak Ozdagli Apr 2015

Distributed Real-Time Hybrid Simulation: Modeling, Development And Experimental Validation, Ali Irmak Ozdagli

Open Access Dissertations

Real-time hybrid simulation (RTHS) has become a recognized methodology for isolating and evaluating performance of critical structural components under potentially catastrophic events such as earthquakes. Although RTHS is efficient in its utilization of equipment and space compared to traditional testing methods such as shake table testing, laboratory resources may not always be available in one location to conduct appropriate large-scale experiments. Consequently, distributed systems, capable of connecting multiple RTHS setups located at numerous geographically distributed facilities through information exchange, become essential. This dissertation focuses on the development, evaluation and validation of a new distributed RTHS (dRTHS) platform enabling integration of …

Go to article

Automated Segmentation, Detection And Fitting Of Piping Elements From Terrestrial Lidar Data, Yun-Ting Su Apr 2015

Automated Segmentation, Detection And Fitting Of Piping Elements From Terrestrial Lidar Data, Yun-Ting Su

Open Access Dissertations

Since the invention of light detection and ranging (LIDAR) in the early 1960s, it has been adopted for use in numerous applications, from topographical mapping with airborne LIDAR platforms to surveying of urban sites with terrestrial LIDAR systems. Static terrestrial LIDAR has become an especially effective tool for surveying, in some cases replacing traditional techniques such as electronic total stations and GPS methods. Current state-of-the-art LIDAR scanners have very fine spatial resolution, generating precise 3D point cloud data with millimeter accuracy. Therefore, LIDAR data can provide 3D details of a scene with an unprecedented level of details. However, automated exploitation …

Go to article

First Prev Next Last