Civil and Environmental Engineering Commons^™

Fluid Isolator, Purdue Ect Team

ECT Fact Sheets Archive

The reliability of concrete infrastructure is vital to ensuring daily life, as well as commerce, can progress without interruption. From the pavement of interstate highways to the driveways and sidewalks in a local neighborhood, concrete is expensive to install and often even more expensive, and intrusive, when it needs to be replaced. Unfortunately, to maintain functionality in winter climates concrete is heavily exposed to deicing salts. This not only affects the roads, driveways, and sidewalks where salt is applied directly, but many other areas such as parking and residential garages where vehicles (and people) will track salt along with water …

Netpoint®, Purdue Ect Team

ECT Fact Sheets Archive

The vast majority of construction scheduling software uses a combination of spreadsheets and Gantt charts for developing and depicting Critical Path Method (CPM) schedules. While this paradigm works for the expert scheduler, it is not conducive to collaboration, and it is prohibitively difficult for non-scheduling experts to understand.

NetPoint® provides a dynamic, visual interface conducive to touch and gestural input. Activities are drawn directly on a time-scale and may be placed on the same row or arranged automatically using codes or the WBS. Such control of the presentation makes it easier to communicate the plan to any type of audience. …

Development, Testing And Implementation Of Traffic Signal Performance Measures At A Local Governmental Agency, Jay Alan Grossman

Indiana Local Technical Assistance Program (LTAP) Technical Reports

The testing and implementation of traffic signal performance measures at a local government agency revolves around three main performance measures: signal detector anomaly identification, signal split failures reports and red light running identification. Signal detector anomaly identification used the Kolmogorov-Smirnov test to compare current and past detector operation and was shown to be effective in identification of anomalies. Three different types of split failure reports were utilized to determine operational issues on signal systems. Long-term longitudinal, corridor scale, and single intersection split failure reports were implemented on active signal systems and found to be effective in determining and correcting problems. …

Smartvid.Io, Purdue Ect Team

ECT Fact Sheets Archive

The collection, organization, and retrieval of industrial media is a pervasive challenge that is especially glaring for companies in the AEC industry. Construction projects often generate large volumes of pictures & videos from the field for tracking progress and communicating between engineers, contractors, and subcontractors. It is not uncommon for field personnel to capture hundreds of photos per week on any given jobsite.

Smartvid.io is a cloud-based software solution designed for the specific needs of industrial media. The application’s internal deep-learning engines, collectively nicknamed VINNIE (for ‘Very Intelligent Neural Network for Insight and Evaluation’), use speech and image recognition to …

Hillman Composite Beam (Hcb®), Purdue Ect Team

ECT Fact Sheets Archive

The Hillman-Composite Beam (HCB®), is an innovative structural member for use in highway and railroad bridges as well as marine facilities. The HCB is essentially a lightweight reinforced concrete beam strengthened and protected by a corrosion-resistant and resilient Fiberglass Reinforced Polymer (FRP) shell.

The beam is comprised of three main components, a concrete arch (compression reinforcement), an FRP bottom flange encapsulating steel strands tying the ends of the arch together (tension reinforcement) and the FRP shell. Galvanized Rebar “shear connectors” are used to make the beam composite with the concrete deck in the same manner as pre-stressed concrete beams.

The …

Industrial-Grade Monitoring Solution: Hoistcam, Purdue Ect Team

ECT Fact Sheets Archive

Safety and productivity are top priorities for contractors and industrial operations. Improving either makes a company more profitable and competitive. Technology advancements that can do both are important for every company to consider. HoistCam^TM industrial-grade video monitoring solutions can improve employees’ productivity and workplace safety in the construction industries. HoistCam also improves efficiency of operations and reduces job site accidents resulting in substantial cost savings to a contractor.

HoistCam™ is an integrated, wireless video system. The use of HoistCam eliminates blind lifts, blind spots and can share the live video with anyone, anywhere with solid security and easy control. …

Performance Assessment Of Natural Pozzolan Roller Compacted Concrete Pavements, Seyedali Ghahari, A Mohammadi, A A. Ramezanianpour

Lyles School of Civil Engineering Faculty Publications

Concrete pavement is cost effective and beneficial because of its sustainability and durability. The maintenance and renovation periods for such pavement compared to other pavements are relatively long; however, a significant issue with pavements, especially roller compacted concrete pavements (RCCP), is salt scaling which occurs due to saline solutions such as deicer salts. In the present work, the performance of RCC containing a natural pozzolan called Trass, as a supple- mentary cementitious material, and an air-entraining agent for salt scaling was investigated. Mechanical and durability tests were performed on specimens containing a water to binder ratio of 0.32, with and …

Purdue Ect Report - Fourth Quarter 2016, Purdue Ect Team

ECT Fact Sheets Archive

Fourth Quarter 2016

This is a quarterly report from the Purdue ECT.

Future Of The Mutcd, Steven G. Jewell P.E., Ptoe

Purdue Road School

The current edition of the national MUTCD was published in the Federal Register as a final rule in December 2009, effective on January 10, 2010. Most people probably don’t realize that this major tool of our trade is a living document that is under constant review and revision. The MUTCD is legally produced and maintained by FHWA. It usually gets officially revised and republished about every 6-10 years. There are a lot of legal issues and hoops that FHWA must progress through, including public review and documentation, to republish the Manual. Because of the constant changing and improving technology, FHWA …

Deployment And Evaluation Of Sinusoidal Rumble Strips, Jijo K. Mathew, Andrew Balmos, Dana Plattner

Purdue Road School

Centerline and edge line rumble strips are effective tools for reducing crashes, but the resulting noise of rumble strip incursions can be disruptive to nearby residents. Sinusoidal rumble strips are emerging as quieter rumble strip construction technology. In this session we will discuss the design, construction, and evaluation of sinusoidal rumble strips on IN 1 in Fort Wayne.

Building A Better Pedestrian And Bicycling Infrastructure, Joyce E. Newland

Purdue Road School

The Federal Highway Administration has a long history of supporting pedestrian and bicycle transportation through funding, policy guidance, program management, and resource development. This Strategic Agenda for Pedestrian and Bicycle Transportation builds on this support and sets the stage for our activities in the coming years.

Compliant Curb Ramp Solutions, Katherine Smutzer

Purdue Road School

Public Rights of Way Accessibility Guidelines (PROWAG) for Curb Ramps. Answers to frequently asked questions for Curb Ramps and Curb Ramp Designs. Examples of curb ramp designs in restricted conditions and other types of curb ramp examples.

Portable Signals: Indot Design Guidance And Specifications, Joseph Bruno

Purdue Road School

Until recently portable traffic signals, which are mounted on towable trailer supports, were not allowed in Indiana. However, portable signals have many advantages over fixed temporary signals, so the Indiana Manual on Uniform Traffic Control Devices was revised to allow them, and specifications for their use are now in place. This presentation provides an overview of portable signals, including INDOT’s current design and specification requirements for these devices.

Mash Implementation For Guardrail, Katherine Smutzer

Purdue Road School

A review of the Manual for Assessing Safety Hardware (MASH) Implementation for w-beam guardrail. What will change and what designers need to know when moving to MASH.

Construction Specifications And Special Provisions, Scott Trammell, Melissa Russell

Purdue Road School

The purpose of this presentation is to help project managers and designers prepare the necessary information required for their contracts with regard to the Standard Specifications and any necessary special provisions. Attendees will be exposed to examples of the right way to incorporate a Unique Special Provision, as well as things to avoid and questions to ask. It is important to know the proper way to write and present a Unique Special Provision.

Testing And Evaluation Of Modern Lighting Technologies, David Boruff

Purdue Road School

This presentation provides an overview of one of the steps INDOT has taken in order to make the change to solid state lighting technology: the adoption of a testing procedure and approved materials list for luminaires.

2017 Directory Of Indiana State, County, City And Town Officials Responsible For Road And Street Work, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Directory

Contact information for agency officials and employees responsible for Indiana’s local road infrastructure.

A New Approach For Realistic 3d Reconstruction Of Planar Surfaces From Laser Scanning Data And Imagery Collected Onboard Modern Low-Cost Aerial Mapping Systems, Zahra Lari, Naser El-Sheimy, Ayman Habib

Lyles School of Civil Engineering Faculty Publications

Over the past few years, accurate 3D surface reconstruction using remotely-sensed data has been recognized as a prerequisite for different mapping, modelling, and monitoring applications. To fulfill the needs of these applications, necessary data are generally collected using various digital imaging systems. Among them, laser scanners have been acknowledged as a fast, accurate, and flexible technology for the acquisition of high density 3D spatial data. Despite their quick accessibility, the acquired 3D data using these systems does not provide semantic information about the nature of scanned surfaces. Hence, reliable processing techniques are employed to extract the required information for 3D …

Road Zipper™, Purdue Ect Team

ECT Fact Sheets Archive

Construction work zones are growing in number around the world. The natural aging of existing roadway infrastructure ensures that more and more maintenance and rehabilitation will be required. Work zones, by their very definition, create two major problems that must be addressed in some way: safety and mobility. In the United States, highway work zones are responsible for almost 25% of all non-recurring congestion and 10% of overall congestion. Vehicle accidents are more common in work zones, and traffic congestion through work zones on urban arterials and freeways is often considered to be “unavoidable." To address these issues, ROAD ZIPPER™ …

2017 Wheel Tax And Excise Surtax Report, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Publications

This report contains an overview of the details of the wheel tax and excise surtax, a summary of the recent changes to the Indiana Code regarding the taxes, revenue estimates for both counties and municipalities, an estimate of revenue projected out to 2018, as well as some commonly asked questions and their answers.

Lucidpipe™ Power System, Purdue Ect Team

ECT Fact Sheets Archive

In most gravity fed water transmission pipelines, it is desired to reduce excess pressure head to prevent undue strain on a pipeline and lower the incidence of leaks. Normally this is done with pressure reducing valves that essentially burn off this excess pressure as heat. The LucidPipe™ system converts it to low cost electricity thereby removing unwanted pressure and generating energy at the same time - energy that can be put used behind the grid or put back on the grid. The LucidPipe™ system extracts a small percentage of pressure head providing nearly invisible operation allowing water operators to fulfill …

Impact Of Rfid Information-Sharing Coordination Over A Supply Chain With Reverse Logistics, Juan Jose Nativi Nicolau

Open Access Dissertations

Companies have adopted environmental practices such as reverse logistics over the past few decades. However, studies show that aligning partners inside the green supply chain can be a substantial problem. This lack of coordination can increase overall supply chain cost. Information technology such as Radio Frequency Identification (RFID) has the potential to enable decentralized supply chain coordinate their information. Even though there are research that address RFID on traditional supply chain, few researches address how to coordinate RFID information sharing in a green supply chain. We study, through simulation experiments, two types of RFID information-sharing coordination under different configurations related …

Integration Of Bim And Utility Sensor Data For Facilities Management, Kamal Suprabhas

Open Access Theses

Building information modelling represents a building as a database of coordinated, consistent and computable information in construction (Sabol, 2008). There has been a recent trend to study the usage of BIM for post-construction facility management. Recently, attempts are also being made to link a BIM model with smart sensing technology or building automation systems (BAC). This thesis aims to investigate the feasibility of using sensor data from mote based light sensors tied to a BIM model, to be used for maintenance based facility management. More specifically, a prototype will be developed that integrates lighting sensor data collected using a mote …

Multimedia Techniques For Construction Education And Training, Wayne A. Bunnell

Open Access Theses

The current profession of civil engineering often focuses education and training on code compliance rather than constructability and construction techniques. Also, it is well accepted that it takes a decade or more for engineers to develop a high-level project construction understanding and many state departments of transportation rely on in-field training for entry-level inspectors, with little or no education provisions for contractors. This research investigated the use of time-lapse photography to develop training and education material that will improve the understanding of project construction and crucial quality control specifications of an entry-level engineer, contractor, or inspector. Overall, the project team …

New Screening Method For Overweight Vehicles, Goran Veljko Milutinovic

Open Access Theses

Throughout the U.S., state agencies are issuing an increasingly large number of permits for overweight vehicles every year. There are various methods used by state agencies to process permit requests; the Indiana Department of Transportation employs a screening process that consists of the Tennessee Formula (allowable weight is determined and checked, for every axle group) in combination with the Gross Vehicle Weight limit. If a permit truck satisfies these two screening criteria, it is permitted; otherwise, it is further processed with refined analyses. The Tennessee Formula is based on Allowable Stress Design. However, most design and evaluation conducted today is …

Quantifying Asphalt Emulsion-Based Chip Seal Curing Times Using Electrical Resistance Measurements, Miguel A. Montoya Rodriguez

Open Access Theses

Chip seals are among the most cost-effective surface treatments available for asphalt pavement preventive maintenance. Chip sealing typically consists of covering a pavement surface with asphalt emulsion into which aggregate chips are embedded. The asphalt emulsion cures through the evaporation of water, which helps to provide mechanical strength for the chip seal. Ultimately, the curing process enables the emulsion to adhere to the pavement while keeping the aggregate chips in place. The curing time for the chip seal depends on many factors, such as the asphalt emulsion and aggregate types, aggregate moisture content, emulsion and aggregate application rates, and environmental …

Effect Of Temperature On Deep Lined Circular Tunnels In Isotropic And Transversely Anisotropic Elastic Ground, Fei Tao

Open Access Theses

A tunnel is a passageway constructed through soil or rock. It is one of the most important underground structures and has been widely used in transportation. Much research has been done on tunnel performance and on the interaction between ground, excavation, liner installation and support. The work has provided a better understanding of the interplay that exists between deformations and stresses transferred from the ground to the support. Significant insight into the problem has been provided by closed-form analytical solutions. A number of analytical formulations have been obtained for underground openings and lined tunnels under different scenarios, namely shallow or …

The Influence Of Alkalinity Of Portland Cement On The Absorption Characteristics Of Superabsorbent Polymers (Sap) For Use In Internally Cured Concrete, Juan D. Tabares Tamayo

Open Access Theses

The concrete industry increasingly emphasizes advances in novel materials that promote construction of more resilient infrastructure. Due to its potential to improve concrete durability, internal curing (IC) of concrete by means of superabsorbent polymers (SAP) has been identified as one of the most promising technologies of the 21st century. The addition of superabsorbent polymers into a cementitious system promotes further hydration of cement by providing internal moisture during the hardening and strength development periods, and thus limits self-desiccation, shrinkage, and cracking.

This thesis presents the work performed on the series of cement pastes with varying alkalinity of their pore solutions …

Fea Methodology For System-Level Redundancy Evaluation: Application To Non-Composite Steel Bridges, Francisco Javier Bonachera Martin

Open Access Dissertations

Currently, all steel bridges with members designated as Fracture Critical Members (FCMs) are required to undergo hands-on inspections every 24 months. A FCM is a primary steel tension member (or portion of) which failure results in collapse or loss of serviceability of a bridge. However, presently, there are no codified procedures used to evaluate system-level redundancy in steel bridges. In this dissertation, finite element analysis (FEA) procedures, techniques and inputs were researched in order to develop bridge models that account for the mechanisms that lead to redundant capacity after the failure of a primary steel member. These mechanisms include partial …

The Effects Of Chloride-Based Deicing Chemicals On Degradation Of Portland Cement Mortars With Alkali Reactive Aggregate, Charles Yicheng Chiu

Open Access Dissertations

The assessment of the influence of deicing chemicals on alkali reactivity of aggregates is still an area of active research, particularly with respect to the combined effects of long-term exposure to deicers, freezing and thawing cycles, and wetting and drying cycles. In order to develop a more comprehensive view of these topics, the present study was conducted in three phases. The focus of the first phase was on studying the effects of the chloride-based deicers on the alkali silica reaction (ASR) using accelerated test methods (i.e. the test was performed at high temperature (80 °C) as per modified ASTM C1260). …