Civil and Environmental Engineering Commons^™

Assessment Of The Ecosystem Services Of Rain Gardens, Hannah M. Hawrot, Dr. Sara Mcmillan, Rachel Scarlett

The Summer Undergraduate Research Fellowship (SURF) Symposium

Stormwater runoff from impervious surfaces contributes to degradation of urban stream ecosystems. Impacts include increased flooding, water quality impairment, and disruption of habitats. Rain gardens are a type of green infrastructure designed to mitigate the adverse effects of stormwater runoff by promoting evapotranspiration, reducing peak flows, and retaining pollutants. Rain gardens can provide additional ecosystem services, defined as benefits that ecosystems provide to people. This includes, but is not limited to, increasing biodiversity by providing habitat, creating green spaces for recreation, and storing carbon. To date, little research has been done integrating these multiple services. My research measured water quality, …

Laboratory Characterization Of Unsteady Boundary Layers, Umair Sarwar, Cary Troy

The Summer Undergraduate Research Fellowship (SURF) Symposium

The study of waves and their effects on mean flow and turbulence in natural water bodies is an important issue for applications in aquatic biology, coastal engineering, sediment transport and hydrodynamic of the lake. These waves result in the generation of an oscillatory (Stokes) boundary layer near the bottom of the water column. The goal of this study was to conduct various experiments that will be used to characterize the turbulence in unsteady boundary layers and help understand the relation between various flow variables (e.g. wave amplitude, frequency, water depth, turbulent kinetic energy, etc.). Using the research facilities provided, three …

Electrochemical Removal Of Lead In Water With Multi-Wall Carbon Nanotube Filters, Benjamin M. Stryker, Sol Park, Zhi Zhou

The Summer Undergraduate Research Fellowship (SURF) Symposium

Heavy metals, such as lead, are highly toxic and typical removal techniques are costly for household applications; causing serious public health risks and economic burdens. Previous studies using electrochemical filtration showed that singe-wall carbon nanotube membranes (SWCNTs) were effective at removing lead, but the use of less expensive multi-walled carbon nanotubes (MWCNTs) has not been fully explored. Therefore, there is a critical need to determine if MWCNTs are cost-effective for the removal of lead in water. The removal efficiency of lead(II) ions in an aqueous solution was evaluated in a flow-through filtration system over 50 minutes at 1.5 mL/min. Calcium …

Improving The Accuracy For The Long-Term Hydrologic Impact Assessment (L-Thia) Model, Anqi Zhang, Lawrence Theller, Bernard A. Engel

The Summer Undergraduate Research Fellowship (SURF) Symposium

Urbanization increases runoff by changing land use types from less impervious to impervious covers. Improving the accuracy of a runoff assessment model, the Long-Term Hydrologic Impact Assessment (L-THIA) Model, can help us to better evaluate the potential uses of Low Impact Development (LID) practices aimed at reducing runoff, as well as to identify appropriate runoff and water quality mitigation methods. Several versions of the model have been built over time, and inconsistencies have been introduced between the models. To improve the accuracy and consistency of the model, the equations and parameters (primarily curve numbers in the case of this model) …

Evaluation Of Radiation And Design Criteria For A Lunar Habitat, Hayley E. Bower, Daniel Gomez, Antonio Bobet, Julio A. Ramirez, Shirley J. Dyke, H. Jay Melosh

The Summer Undergraduate Research Fellowship (SURF) Symposium

Extraterrestrial habitation has long been the object of science fiction, and experts in the fields of science and engineering have proposed many designs for a lunar base. The research conducted has focused on either structural stability, radiation protection, or meteorite-impact vulnerabilities, but rarely have these been considered together. The Resilient ExtraTerrestrial Habitats (RETH) project aims to design a lunar habitat from a hazards perspective, considering general degradation, meteorite impacts, seismic activity, radiation exposure, thermal extremes, and geomagnetic storms in addition to the physiological, psychological, and sociological aspects of astronauts living in such a habitat. Several members of the RETH team …

Technology To Manufacture Oriented Pvc (Pvc-O) Pipes, Purdue Ect Team

ECT Fact Sheets Archive

The development of Molecor´s technology, which is based on the application of a Molecular Orientation process, has delivered a significant turning point in the pipelines sector. With this technological development, the company has begun to manufacture TOM® PVC-O pipes, the most eco-friendly pipes on the market. The Molecor technology enabled eradicating many of the existing disadvantages of thermoplastic pipes.

This technology delivers a clear objective; to provide the water industry with a solution for pipes carrying pressurized water in an environmentally friendly, yet cost efficient manner. This also extends a service life compared to pipeline materials currently in use.

The …

Purdue Airsense: An Open-Source Air Quality Monitoring System, Ruihang Du, Stephane Junior Nuoafo Wanko, Shadi Tariq Azouz, Brandon Emil Boor, Greg Michalski

The Summer Undergraduate Research Fellowship (SURF) Symposium

Ambient air pollutants have received increasing attention in recent years since studies have demonstrated their adverse health effects. To address the sparsity of concentration data for major ambient air pollutants, researchers have introduced several new low-cost measurement methods. Despite these efforts, only a few gas concentration data and aerosol size distribution data are publicly accessible through online platforms. In this study, we used Alphasense sensors to build an innovative low-cost portable sensor system that measures the concentration of ozone, CO, NOx, and coarse and fine particulate matter (PM). Alongside the portable sensor system, we assembled lab-grade analytical instruments in a …

Full-Water Column Turbulence Parameterization Of Stratified Waters In Southern Lake Michigan, Kyla A. Prendergast, Cary D. Troy, David Cannon

The Summer Undergraduate Research Fellowship (SURF) Symposium

Full water column mean flow and turbulence structure was characterized at two stratified locations in Lake Michigan (a. Muskegon, MI; b. Michigan City, IN) in order to better understand the filtration potential of invasive quagga mussels. Invasive quagga mussels in Lake Michigan are filter feeders and can dramatically alter clarity as well as the biological/chemical characteristics of the water column. This filtering capacity is highly contingent on turbulence characteristics throughout the water column, which is poorly understood in the Great Lakes. Using velocity, temperature, and turbulence data collected from these locations, the structure of the water column turbulence was modeled …

Assessing The Hydraulics Of Water Heaters By Adding Fluoride As A Tracer To Inform Its Overall Effect On Water Quality, Christian A. Guerrero, William Schmidt, Antoine Aubeneau, Amisha D. Shah

The Summer Undergraduate Research Fellowship (SURF) Symposium

As residential water heaters are the primary source of waterborne disease outbreaks in the U.S. there is a need to better understand how they are contributing to decreased water quality in buildings. Previous work has indicated that intermittent stagnation, low disinfection residual and operation temperatures promote the growth of pathogens in water heaters. The overall effect of hydrodynamics of water heaters on these factors remains unclear. Therefore, a tracer study was performed to determine the effect of and characterize hydraulics of the typical residential water heater on water quality. Controlling temperature and flow rate, a pilot-scale hot water system (50 …

The Effect Of Reinforcing Bar Bend Radius On The Strength And Behavior Of Knee Joints, Xitong Zhou, Christopher S. Williams, Hwa Ching Wang

The Summer Undergraduate Research Fellowship (SURF) Symposium

The strut-and-tie method (STM) is used by structural engineers to design discontinuity regions of reinforced concrete structures. Using STM, the stress distribution in a concrete member is expressed as a set of struts, ties, and nodes in a strut-and-tie model. These components are then proportioned and evaluated to develop an appropriate design. One type of node that appears in knee joints (i.e., frame corners) subjected to closing moments is referred to as a curved-bar node. Although curved-bar nodes represent a unique concentration of stresses in a structure, little research focused on curved-bar node design has been conducted. In response to …

Hazard Assessment Of Meteoroid Impact For The Design Of Lunar Habitats, Herta Paola Montoya, Shirley Dyke, Julio A. Ramirez, Antonio Bobet, H. Jay Melosh, Daniel Gomez

The Summer Undergraduate Research Fellowship (SURF) Symposium

The design of self-sustaining lunar habitats is a challenge primarily due to the Moon’s lack of atmospheric protection and hazardous environment. To assure safe habitats that will lead to further lunar and space exploration, it is necessary to assess the different hazards faced on the Moon such as meteoroid impacts, extreme temperatures, and radiation. In particular, meteoroids pose a risk to lunar structures due to their high frequency of occurrence and hypervelocity impact. Continuous meteoroid impacts can harm structural elements and vital equipment compromising the well-being of lunar inhabitants. This study is focused on the hazard conceptualization and quantification of …

Modelling Of Phase Transforming Cellular Material (Pxcm), Chidubem N. Enebechi, Yunlan Zhang, David Restrepo Arango, Pablo Zavattieri

The Summer Undergraduate Research Fellowship (SURF) Symposium

Phase transforming cellular materials (PXCMs) are a new class of materials that can go through large deformation and return to their original configuration. Currently, there are reliable cellular materials that can resist large deformation, for example, honey comb; however, when these materials are compared to PXCMs, they cannot stay in their elastic range. The biggest advantage about PXCMs is that they are not only inexpensive materials, but they are also highly-durable and they absorb and dissipate high amounts of energy. The main concept behind PXCMs is that they contain unit cells that have stable configurations. Each stable configuration of the …

Purdue Airsense: An Affordable Way To Measure And Study Air Pollution, Stephane Junior Nouafo Wanko, Shadi Tariq Azouz, Ruihang Du, Brandon Boor, Greg Michalski

The Summer Undergraduate Research Fellowship (SURF) Symposium

Air pollution is a major health hazard worldwide, accounting for one-eighth of all deaths in 2012 (World Health Organization). Globally, there is a severe lack of ground-based spatiotemporal monitoring of gaseous and particulate air pollutants, particularly in Africa, South and Central America, and the Middle East. This is in great part due to the high costs of air quality instrumentation that meet accuracy and reliability criteria set by monitoring agencies. The air quality data that is available is often not presented to the public in a user-friendly manner. Taking advantage of recent developments in low-cost sensing technologies, an integrated sensor …

Buckling Of Cylindrical Shells Under Wind Loading, Tianlong Sun, Eyas Azzuni, Sukru Guzey

The Summer Undergraduate Research Fellowship (SURF) Symposium

Cylindrical shells such as aboveground steel storage tanks are widely used to store gases, chemicals and fuels. Stiffener rings are introduced to prevent cylindrical shells from buckling due to wind loads. The current top wind stiffener design rules used in the USA for such cylindrical storage tanks are specified in API 650. However, the design methodology of top stiffener rings is overly conservative. Therefore, relaxation of the design rules for the top stiffener is investigated in this study. The API 650 mandated top stiffener size was reduced to the same size as the mandated intermediate stiffener ring in this study. …

Post-Earthquake Fire Assessment Of Steel Buildings, Yi Li, Rachel Chicchi, Amit H. Varma

The Summer Undergraduate Research Fellowship (SURF) Symposium

Resilience of structural systems after hazardous events is a crucial concern of building design. An abundance of research has focused on hazards such as seismic and fire separately. This project conducted a multi-hazard study on steel buildings considering both seismic and fire damage. A literature review of the behavior of steel-framed buildings due to fires after earthquakes, known as post-earthquake fires (PEF), is offered. The new PEF methodology, delivered in this study, starts with creating a three dimensional (3D) model of the examined steel building using the finite element method software, ABAQUS. Next, varying intensities of seismic and fire hazards …

Opportunities And Benefits Of Commercial Truck Platooning, Greg Shaver, Katie England

Indiana Connected and Autonomous Vehicle Summit

No abstract provided.

Capacity And Safety Opportunities And Challenges In The Transition Period, Andrew Tarko, Brad L. Steckler

Indiana Connected and Autonomous Vehicle Summit

No abstract provided.

Materials And Maintenance Considerations For Infrastructure Critical To Connected And Autonomous Vehicles, Timothy Wells, Tony Mcclellan

Indiana Connected and Autonomous Vehicle Summit

No abstract provided.

Indot 2017 Connected Vehicle Deployments On Us 30 And Us 31, John Mcgregor, Howell Li

Indiana Connected and Autonomous Vehicle Summit

No abstract provided.

Geomatics Engineering And Autonomous Vehicles, Ayman Habib, Jim Sturdevant

Indiana Connected and Autonomous Vehicle Summit

No abstract provided.

Field Testing In Peer States And Emerging Partnership Opportunities, Srinivas Peeta

Indiana Connected and Autonomous Vehicle Summit

No abstract provided.

Connected And Autonomous Vehicle Summit, Jim Poturalski

Indiana Connected and Autonomous Vehicle Summit

No abstract provided.

Purdue Connected Autonomous Transportation Initiative, Tomas Diaz De La Rubia

Indiana Connected and Autonomous Vehicle Summit

No abstract provided.

Identification Of Roadway Assets By Integration Of Lidar And Camera Images, Michelle Mekker, Yun-Jou Lin, Magdy I. Elahnasawy, Tamer S.A. Shamseldin, Ayman Habib, Darcy M. Bullock

Indiana Connected and Autonomous Vehicle Summit

No abstract provided.

Connected Vehicle Data For Work Zone Performance Measures, Michelle Mekker, Howell Li, Yun-Jou Lin, Magdy I. Elahnasawy, Tamer S.A. Shamseldin, Ayman Habib, Darcy M. Bullock

Indiana Connected and Autonomous Vehicle Summit

No abstract provided.

Connected Vehicle Data For Traffic Signal Performance Measures, Jijo K. Mathew

Indiana Connected and Autonomous Vehicle Summit

No abstract provided.

Connected Vehicle Data For Interstate Performance Measures, Rahul Sakhare, Howell Li

Indiana Connected and Autonomous Vehicle Summit

No abstract provided.

Connected Vehicle (Cv) Technology Overview, Howell Li, W Benjamin Smith

Indiana Connected and Autonomous Vehicle Summit

No abstract provided.

Concise Handbook For Temporary Traffic Control - Construction, Maintenance, And Utility Operations, Indiana Ltap, Ohio Department Of Transportation

Indiana Local Technical Assistance Program (LTAP) Publications

This handbook gives the basic principles and provides examples for the design, application, installation, and maintenance of the various types of traffic control devices used in temporary traffic control or for incident management. Traffic control in roundabouts has been included in this version. The guidelines presented are in accordance with the standards provided within the Indiana Manual for Uniform Traffic Control Devices (IMUTCD). This handbook is based upon one created by the Ohio Department of Transportation, Guidelines for Traffic Control in Work Zones. Indiana LTAP expresses thanks to ODOT for their permission to reprint this material.

Climate, Weather, Socio-Economic And Electricity Usage Data For The Residential And Commercial Sectors In Fl, U.S, Sayanti Mukherjee, Roshanak Nateghi

School of Industrial Engineering Faculty Publications

This paper presents the data that is used in the article entitled “Climate sensitivity of end-use electricity consumption in the built environment: An application to the state of Florida, United States” (Mukhopadhyay and Nateghi, 2017) [1]. The data described in this paper pertains to the state of Florida (during the period of January 1990 to November 2015). It can be classified into four categories of (i) state-level electricity consumption data; (ii) climate data; (iii) weather data; and (iv) socio-economic data. While, electricity consumption data and climate data are obtained at monthly scale directly from the source, the weather data was …