Civil and Environmental Engineering Commons^™

Bridge Maintenance To Enhance Corrosion Resistance And Performance Of Steel Girder Bridges, Luis M. Moran Yanez

Open Access Dissertations

The integrity and efficiency of any national highway system relies on the condition of the various components. Bridges are fundamental elements of a highway system, representing an important investment and a strategic link that facilitates the transport of persons and goods. The cost to rehabilitate or replace a highway bridge represents an important expenditure to the owner, who needs to evaluate the correct time to assume that cost. Among the several factors that affect the condition of steel highway bridges, corrosion is identified as the main problem. In the USA corrosion is the primary cause of structurally deficient steel bridges. …

Fracture Analysis In Biomimetic Bouligand Architectures, Nobphadon Suksanqpanya

Open Access Dissertations

The Bouligand structure, which is found in many biological materials, is a hierarchical architecture that features uniaxial fiber layers assembled periodically into a helicoidal pattern. Many studies have highlighted the high damage-resistant performance of Bouligand structures and its biomimetic materials. One of the outstanding species with the Bouligand structures is the smashing Mantis Shrimp, Odontodactylus Scyllarus, (or stomatopod) due to its capability of generating high speed, high acceleration blows using its raptorial appendage to defeat highly armored preys. The load-bearing part of this appendage, the dactyl club, contains an interior region, which is mainly characterized by the Bouligand structure. This …

Geometric Accuracy Evaluation Of Mobile Terrestrial Lidar Surveys With Supporting Algorithms, Chisaphat Supunyachotsakul

Open Access Dissertations

Mobile Mapping System (MMS) technology is widely used for many applications, hence quantifying its accuracy is a very important and essential task and is a primary focus of this research. In general, to perfrom geometric accuracy evaluation of MMS data, validation points/features are needed. A method is needed to capture a point feature off the roadway in a position where a target on the ground surface would not be visible to the scanner. In this study, eight sphere targets with 14" diameter were placed on the shoulder of the roadway over validation points on the ground. The sphere targets were …

Policy Design Tool For Managing Indoor Residential Water Demand In Water-Scarce Regions, Mujahed M. Thneibat

Open Access Dissertations

In view of population growth; climate change; and economic evolution, water resources in numerous parts of the world have reached their natural capacities. Consequently, the ability of many countries to grow; meet the basic needs of inhabitants; and protect the environment will be endangered like never before unless water resources are smartly handled and managed. ^ In the past few decades, many developed and developing countries have suffered from water scarcity, and more are certain to follow. The water security dilemma is much more challenging in developing countries. Water utilities have had to follow regulatory plans to manage demand on …

Identifying And Prioritizing Critical Success Factors For Fixed Base Operators In The United States: A Mixed Method Approach, Yu Wang

Open Access Dissertations

Fixed Base Operators (FBOs) are major service providers for the general aviation (GA) sector, which closely connect the public with the aviation industry. However, over the past decade, the U.S. GA industry has experienced a decline in the numbers of registered aircraft, pilots, and airports. Due to the fact that FBOs significantly contribute to the aviation industry, further research studies regarding the FBO-sector at a national level are needed. The purpose of this dissertation was to identify and prioritize the critical success factors (CSFs) that promote the success of FBO operations in the United States.

The methodology consisted of a …

Computer Vision-Based Structural Assessment Exploiting Large Volumes Of Images, Chul Min Yeum

Open Access Dissertations

Visual assessment is a process to understand the state of a structure based on evaluations originating from visual information. Recent advances in computer vision to explore new sensors, sensing platforms and high-performance computing have shed light on the potential for vision-based visual assessment in civil engineering structures. The use of low-cost, high-resolution visual sensors in conjunction with mobile and aerial platforms can overcome spatial and temporal limitations typically associated with other forms of sensing in civil structures. Also, GPU-accelerated and parallel computing offer unprecedented speed and performance, accelerating processing the collected visual data. However, despite the enormous endeavor in past …

Indiana Local Road And Bridge Conditions, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Publications

In response to an appilcation requirement for the Community Matching Grant Fund Program, 354 asset management plans for roads and bridges were submitted in 2016 which contain the current conditions of local agency roads and bridges. This report describes these conditions and suggests the funding levels necessary to improve and maintain these assets at defined condition levels over a ten-year period. A ten-year horizon was used so as to correspond to previous LTAP studies performed in 2003 and 2009. The ten-year time period is also comparable to other Indiana studies.

Investigation Of Self-Organizing Traffic Signal Control With Graphical Signal Performance Measures, Christopher M. Day, Darcy M. Bullock

Lyles School of Civil Engineering Faculty Publications

Adaptive signal control is the subject of an increasing amount of research, as well as development and implementation. Most existing adaptive control systems achieve coordination by applying system control as a constraining layer on top of local control. Some researchers have suggested that, with the right local-control logic, coordination might be achieved as an dynamically emergent phenomenon without the need for a management layer. This paper explores the potential of a self-organizing signal control algorithm using a variety of performance measures. First, the initially reported algorithm performance is reproduced in an idealized environment; next, the algorithm is applied in a …

Scalable Dashboard For Identifying Split Failures And Heuristic For Reallocating Split Times, Howell Li, Lucy Richardson, Christopher M. Day, James Howard, Darcy M. Bullock

Lyles School of Civil Engineering Faculty Publications

The three fundamental parameters of a traffic signal system are split, cycle, and offset. This paper describes the use of high-resolution data (a) to identify time periods during which split parameters may be insufficient and (b) to help practitioners identify opportunities for reallocating split time. A case study of seven corridors with 47 intersections is presented. A drill-down approach was developed to identify movements that could be improved by a reallocation of split times. A heuristic that can reallocate up to 5 seconds of underutilized green time on a competing phase was applied to those corridors. …

Detector-Free Optimization Of Traffic Signal Offsets With Connected Vehicle Data, Cristopher Day, Howell Li, Lucy Richardson, James Howard, Tom Platte, Jim Sturdevant, Darcy M. Bullock

Lyles School of Civil Engineering Faculty Publications

It has recently been shown that signal offset optimization is feasible using vehicle trajectory data at low levels of market penetration. This study performs offset optimization on two corridors using this type ofdata. Six weeks oftrajectory splines were processed for two corridors including 25 signalized intersections, in order to create vehicle arrival profiles, using a proposed procedure called "virtual detection." After processing and filtering the data, penetration rates between 0.09-0.80% were observed, varying by approach. The arrival profiles were statistically compared against those measured with physical detectors, with the majority of the approaches showing statistically significant goodness-of-fit at a 90% …

The Purdue Agro-Climatic (Pac) Dataset For The U.S. Corn Belt: Development And Initial Results, Xing Liu, Elin Jacobs, Anil Kumar, Larry Biehl, Jeff Andersen, Dev Niyogi

Department of Earth, Atmospheric, and Planetary Sciences Faculty Publications

This study is a result of a project titled ‘‘Useful to Usable (U2U): Transforming Climate Variability and Change Information for Cereal Crop Producers”. This paper responds to the project goal to improve farm resiliency and proftability in the U.S. Corn Belt region by transforming existing meteorological dataset into usable knowledge and tools for the agricultural community.

A high-resolution agro-climatic dataset that covers the U.S. Corn Belt was built for the U2U project based on a Land Data Assimilation System (LDAS) framework. This data referred to as the Purdue Agro-climatic (PAC) dataset is a gridded, continuous dataset suitable for agrocli- matic …

Cement Asphalt Mortar Modelling And Its Influence On High-Speed Train–Bridge System In Presence Of Moderate Earthquakes And Service Loading, Lingkun Chen

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Study On Adsorption For Pb2+ Of Red Mud Sintering-Expanded Haydites, Aoping He, Wenfeng Zhu, Linjiang Wang, Jianmin Zeng, Xiyong Chen

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Research On Aseismic Behavior Of Assemble-Type Composited Wall, Yuanyuan Zhao

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Urban Water Project At Food Finders, Abby Zielinski

Purdue Journal of Service-Learning and International Engagement

Abby Zielinski is a sophomore in environmental and ecological engineering. In this article, she describes her community experience at Food Finders Resource and Education Center, which was associated with a course called Urban Water Projects.

Reducing Landfill Waste: Implementation And Optimization Of A Vermicomposting System, John Hemmerling, Jeremy Pan, Sahil Bhalla, Karan Kedia

Purdue Journal of Service-Learning and International Engagement

John Hemmerling, a senior in chemical engineering and project leader, Jeremy Pan, a sophomore in computer science, and Sahil Bhalla and Karan Kedia, both freshman in first-year engineering, are a team of four students participating in the Engineering Projects in Community Service (EPICS) Environmental Improvement Initiatives (EII). In this article they describe how they are investigating waste generation reduction at the Retrofit Net-Zero Energy Water and Waste (ReNEWW) house in West Lafayette, Indiana, in conjunction with Whirlpool Corporation. Their work is intended to provide guidance to households on implementing vermicomposting systems so food waste can be diverted from our landfills.

Numerical Modeling And Seismic Assessment Of Smart Isolation System For High-Speed Railway Rc Bridge Subjected To Near-Field Ground Motions, Lingkun Chen

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Study Of Poisoning Mechanism Of Hg And As On V2o5–Wo3/Tio2 Scr De-Nox Catalysts, Qingcai Liu, Ming Kong, Lu Yao, Shan Ren, Jian Yang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Research On Photocatalytic Properties Of Tio2–Graphene Composites With Different Morphologies, Guang Hu, Jian Yang, Dong Zhao, Ying Chen, Yan Cao

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Buckling Analysis Of Laminated Composite Box Beams, Domagoj Lanc, Goran Turkalj, Josip Brnic

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Portable Modular Conveyor, Purdue Ect Team

ECT Fact Sheets Archive

The Portable Modular Conveyor-Material Placer (PMC) is a quick, easy, dependable and cost effective way to place materials in the limits of the confined grade or work area. This specialized piece of equipment was developed to place concrete in front of a concrete slip form-paving machine. The typical method of placing concrete requires a self-propelled belt placer, which is very expensive to purchase and mobilize to the jobsite. The PMC creates a significant cost savings in labor and equipment with the PMC. It is a direct replacement for conventional material placing equipment, including all in grade belt placing machines. As …

Precast Concrete Pavement Practices Overview, Shiraz Tayabji

JTRP Affiliated Workshops

No abstract provided.

Overview Of Illinois Tollway Precast Panel System, Steve Gillen

JTRP Affiliated Workshops

No abstract provided.

Super-Slab® Precast Pavement System, Dan E. Moellman

JTRP Affiliated Workshops

No abstract provided.

Precast Concrete Pavement Practices—Generic System Use In Michigan, Texas & California, Shiraz Tayabji

JTRP Affiliated Workshops

No abstract provided.

Infant Exposure To Resuspended Particles From Carpeted Flooring: Experimental Chamber Study With A Simplified Mechanical Crawling Infant, Manjie Fu, Brandon E. Boor

The Summer Undergraduate Research Fellowship (SURF) Symposium

Airborne particles of biological origin – bioaerosols – are present everywhere, including the indoor environment where people spend considerable amounts of time, and exposure to such materials via inhalation can have a number of health implications. Bioaerosol dynamics can occur through a variety of mechanisms, among them resuspension of deposited particles due to human activity. Because the breathing zone of infants is at a much lower height than that of adults, there is reason to suspect that infants are exposed to greater concentrations of bioaerosols resuspended from the floor, though knowledge in this specific area is limited. To investigate, a …

Pore Scale Transport Of Miscible And Immiscible Fluids In Porous Media, Tolulope O. Odimayomi, Arezoo M. Ardekani

The Summer Undergraduate Research Fellowship (SURF) Symposium

The separation of harmful or valuable substances entrapped in porous media has applications in processes such as enhanced oil recovery, diffusion in tissue, and aquifer remediation. In this study the motion and removal rate of immiscible and miscible solutions have been analyzed to gain understanding of solvent effectiveness as it is diluted due to diffusion or mixing within porous materials. The extraction of oil using water, a surfactant solution of 4% CTAB in water, and a foam produced form the surfactant solution is observed using two dimensional flows between parallel slides containing cylindrical obstacles. The fluid motion is visualized. The …

Pah Analysis Of Sediments From Pleasant Run Creek Adjacent To A Former Manufactured Gas Plant, Celeste A. Bronson, Xuda Lin, Amisha D. Shah, Nadya Zyaykina, Chad Jafvert

The Summer Undergraduate Research Fellowship (SURF) Symposium

Polycyclic aromatic hydrocarbons (PAHs) are known to be toxic and some are even carcinogenic. A prime source of PAHs is coal tar. Coal tar can be found in soils and sediments near former manufactured gas plants (MGPs) or coking facilities. This study involves characterizing the chemical composition and concentrations of PAHs within stream sediments at a former MGP site by Pleasant Run Creek in Indianapolis, Indiana. To characterize the stream sediments, sediment cores were removed from various locations along the stream and sampled with depth. Sample collection was conducted in partnership with the environmental engineering firm, August Mack Environmental. Samples …

Development Of A New Nanohub Simulation Tool: Coarse Graining Of Crystalline Nano-Cellulose., Kuo Tian, Mehdi Shishehbor, Pablo Zavattieri

The Summer Undergraduate Research Fellowship (SURF) Symposium

Crystalline Nano-cellulose (CNC) is a general molecular structure obtained from acid hydrolysis of native fiber. They are often very short (100 to 1000 manometers) and the mechanical properties of CNC varies depend on length scale. Due to defect formation of the structure, the mechanical properties of the material composed of such CNC may vary drastically. This study was to provide a numerical tool to integrate a few valid modules and to better understand the mechanical properties of CNC and the overall performance of the bio-inspired material composed of CNC. Our focus is mainly on two type of composite structure [1] …

Exploring Regional And Telecoupled Land Use Change Impacts From Environmental Shocks, Kevin Hill, Liz Wachs, Brady Hardiman, David Yu, Shweta Singh

The Summer Undergraduate Research Fellowship (SURF) Symposium

Natural disasters or environmental shocks have the potential to disrupt local agricultural systems as well as distant agricultural systems through cascading effects. In this work we selected two distinct environmental shocks and traced their cascading effects on land use change. Quantifying cascading effects is a salient issue because climate change forecasts indicate an increase in frequency and intensity of global environmental shocks. This study incorporated the concept of telecoupled systems involving interrelating ecological, economic and political/social components. A telecoupled framework involving cascading effects was implemented using three approaches. The first approach involved using bilateral agricultural trade matrix data to analyze …