Civil and Environmental Engineering Commons^™

Simulating Structural Change In Agriculture: Modelling Farming Households And Farm Succession, Christian Troost, Thomas Berger

International Congress on Environmental Modelling and Software

The majority of European farms are family farms. Farm succession, i.e. passing over the responsibility from farm owner and manager to their heir, is an important element of structural change in agriculture. We present a model implementation capturing farming household evolution in an agent- based model and explore the consequences of farm household composition and farm succession on agricultural production, investment and participation in agri-environmental policy schemes.

A Dynamic Water Supply Portfolio Optimisation Approach, Michael G. Porter, Oz Sahin

International Congress on Environmental Modelling and Software

This paper examines the future water supply situation in Adelaide, a relatively dry city in South Australia, in the driest populated continent on earth. Using the Systems Approach, we analyse a diversified strategy with a new portfolio mix of core bulk water: (i) rainfall independent desalinated water from the ocean and (ii) rainfall dependent water from catchments including the Mount Lofty Ranges (MLR) and water piped from the Murray‐Darling Basin (MDB) including via the Mannum‐Adelaide Pipeline. Our focus is on the quantity, indicative costs and risks of water supply, and associated augmentation choices and trade‐offs, over the next century to …

Modelling Urban Transition: A Case Of Rainwater Harvesting, Adam C. Castonguay, Christian Urich, Md Sayed Iftekhar, Ana Deletic

International Congress on Environmental Modelling and Software

Cities are increasingly exposed to extreme climate events such as floods and droughts. Land use change is also expected to reduce the availability of green spaces and intensify extreme heat events. Given these pressures on the quality of life of urban dwellers, there is a great need to improve the integrated management of water to enable sustainable development of rapidly growing cities and improve human well-being. A promising way to make urban communities more liveable is to invest in green water technologies, that is, decentralised and low-energy water supply, wastewater and stormwater solutions, to foster the transition to more sustainable …

An Optimization Approach To Define Effective Air Quality Policies At Urban Scale, Helder Relvas, Ana Isabel Miranda, Joana Ferreira, Alexandra Monteiro, Enrico Turrini, Claudio Carnevale, Marialuisa Volta

International Congress on Environmental Modelling and Software

The use of modeling to support environmental authorities to plan air quality control policies is now quite widespread in Europe. At the sub-national level, the most common approach is based on a scenario analysis which uses Chemical Transport Models (CTM) to assess the impact of emission reductions on air pollution concentrations. In this work, a multi-objective approach based on RIAT+ (Regional Integrated Assessment Tool) is used to cost-efficiently define air quality improvement policies. Internal costs (due to the implementation of emission reduction measures) and external benefit gains (due to the reduction of population exposure to air pollution levels) are worked …

A Better Way To Build Plant Models, Dean Holzworth, Hamish Brown, Neil Huth

International Congress on Environmental Modelling and Software

The plant modelling framework (PMF) in the next generation of APSIM enables plant models to be constructed in a novel, more reliable and robust manner. It provides a library of small processes that can be aggregated into bigger processes which in turn can be combined into larger constructs, ultimately forming a plant model. The user interface supports a workflow that allows the model builder to collate and store experimental data, construct the model (by process aggregation), create and run simulations of the experimental data and graphically view the performance of the model. The model builder can then iteratively modify the …

Towards Standard Variable Names For Environmental Chemistry: Semantic Mediation And Extensions To The Csdms Standard Names, Scott Dale Peckham

International Congress on Environmental Modelling and Software

When a model needs to obtain the values of its input variables from another model or from a data file, it is necessary to reliably match the internal vocabularies of the coupled resources (e.g. models or data sets). In addition, spatial regridding, time interpolation and unit conversion may be required. In order to automate this semantic matching and variable exchange process in a model coupling framework, the internal vocabularies of the resources to be coupled must be mapped to a controlled vocabulary in a hub-and-spoke manner. The CSDMS Standard Names provide a domain-independent set of conventions and rules for constructing …

How Modellers Frame Uncertainty In Scientific Publications: Review And Reflections, Joseph H.A. Guillaume, Casey Helgeson, Sondoss Elsawah, Anthony J. Jakeman, Matti Kummu

International Congress on Environmental Modelling and Software

Uncertainty is recognised as an essential issue in environmental modelling. As modellers, we notably use a variety of tools and techniques within an analysis, for example related to uncertainty quantification and model validation. We also address uncertainty by how we present results. For example, experienced modellers are careful to distinguish robust conclusions from those that need further work, and the precision of quantitative results is tailored to their accuracy. In doing so, the modeller frames how uncertainty should be interpreted by their audience. This is an area which extends beyond modelling to fields such as philosophy of science, semantics, discourse …

Modelling Combinations Of Economic Instruments To Eliminate Depletion In The Alto Guadalentín Aquifer (Se Spain), David Martínez-Granados, Javier Calatrava

International Congress on Environmental Modelling and Software

This paper analyses the cost-effectiveness of combining several policy instruments to address the problem of non-renewable pumping in the Alto Guadalentín aquifer in Southeast Spain, one of the most extreme cases of aquifer depletion in Europe. Their economic impact is assessed using a partial equilibrium non-linear mathematical programming model that maximises the farm net margin resulting from the use of the available water resources for irrigation in the area. Our results show that all the alternatives have significant economic impacts, although the future availability of desalinised resources would notably mitigate them, as farmers can substitute groundwater with desalinised water. …

Simplified Performance-Based Analysis For Seismic Slope Displacements, Marlem Lucia Astorga Mejia

Theses and Dissertations

Millions of lives have been lost over the years as a result of the effects of earthquakes. One of these devastating effects is slope failure, more commonly known as landslide. Over the years, seismologists and engineers have teamed up to better record data during an earthquake. As technology has advanced, the data obtained have become more refined, allowing engineers to use the data in their efforts to estimate earthquakes where they have not yet occurred. Several methods have been proposed over time to utilize the earthquake data and estimate slope displacements. A pioneer in the development of methods to estimate …

An Investigation Of The Impact A Rov Competition Curriculum Has On Student Interest In Stem, Specifically Technology And Engineering, Daniel Gordon Bates

Student Works

This research investigates the impact a Remotely Operated Vehicle (ROV) program has on student interest in, and perception of, technology and engineering (sTEm). ROV programs embed areas of science, technology, engineering and math (STEM) into their curriculum; however, emphasis for this study is placed on interest and perception of the "T" and "E" of STEM. Although there are many articles detailing the benefits of ROV programs, there is little empirical data documenting the impact on student interest and perception of sTEm. This study outlines the background of a few major ROV programs in the U.S.; specifically Utah Underwater Robotics (UUR), …

An Investigation Of The Impact A Rov Competition Curriculum Has On Student Interest In Stem, Specifically Technology And Engineering, Daniel Gordon Bates

Theses and Dissertations

This research investigates the impact a Remotely Operated Vehicle (ROV) program has on student interest in, and perception of, technology and engineering (sTEm). ROV programs embed areas of science, technology, engineering and math (STEM) into their curriculum; however, emphasis for this study is placed on interest and perception of the "T" and "E" of STEM. Although there are many articles detailing the benefits of ROV programs, there is little empirical data documenting the impact on student interest and perception of sTEm. This study outlines the background of a few major ROV programs in the U.S.; specifically Utah Underwater Robotics (UUR), …

Optimum Pick Point Locations For Straight, Singly Symmetric Steel Plate Girders, J. Andrew Pratt

Theses and Dissertations

Optimal pick point location is discovered in order to have the full buckling capacity of a suspended, non-prismatic, singly symmetric plate girders. The results show that a significant increase in stability occurs at the pick point location of 0.25L, where L is the span length. This recommendation can be utilized in the field to save construction cost and time because of how simplistic it is to use. A finite element software, ABAQUS 6.14, is used to determine the buckling capacities at different pick point locations and of different cross sections. The dimension of the cross sections and span lengths for …

Typical And Darkened Portland Cement Concrete Pavement: Temperature, Moisture, And Roughness Analyses, Tenli Waters

Theses and Dissertations

The objectives of this research were to 1) investigate the effects of lower concrete albedo on the thermal behavior of concrete pavement by directly comparing temperatures and moisture contents of typical and darkened concrete pavements and 2) investigate changes in roughness of both typical and darkened concrete pavements as a result of changes in temperature and moisture gradients. The scope of the research included instrumentation, testing, and analysis of typical and darkened concrete pavements constructed in northern Utah.Procedures related to field testing included infrared thermography, thermocouple readings, sensor data collection, and roughness surveys. Elevation surveys and albedo measurements were also …

Investigation Of Structural Capacity Of Geogrid-Reinforced Aggregate Base Materials In Flexible Pavements, Eric J. Sweat

Theses and Dissertations

The installation of geogrid as a means of extending the service life of a roadway or reducing the required base course thickness of a pavement structure has become increasingly popular. The realization of these benefits depends largely on the degree to which the geogrid reinforcement leads to an increase in the stiffness of the aggregate base course layer. The objective of this research was to investigate the structural capacity of geogrid-reinforced aggregate base materials in flexible pavements through full-scale testing. The scope involved field testing at two sites in northern Utah that each included five different geogrid-reinforced sections and five …

Quantifying Computer Vision Model Quality Using Various Processing Techniques, Samantha Anna Ruggles

Theses and Dissertations

Recently, the use of unmanned aerial vehicles (UAVs) has increased in popularity across several industries. Most notable, however, is the impact that this technology has had in research at academic institutions worldwide. As the technology for UAVs has improved, with that comes easier to operate, more accessible equipment. UAVs have been used in various types of applications and are quickly becoming a preferred method of studying and analyzing a site. Currently, the most common use of a UAV is to monitor a location of interest to a researcher that is difficult to gain access to otherwise. The UAV can be …

Friction Bit Joining Of Dissimilar Combinations Of Gadp 1180 Steel And Aa 7085 – T76 Aluminum, Lorne Steele Atwood

Theses and Dissertations

Friction Bit Joining (FBJ) is a method used to join lightweight metals to advanced high-strength steels (AHSS). The automotive industry is experiencing pressure to improve fuel efficiency in their vehicles. The use of AHSS and aluminum will reduce vehicle weight which will assist in reducing fuel consumption. Previous research achieved joint strengths well above that which was required in three out of the four standard joint strength tests using DP980 AHSS and 7075 aluminum. The joints were mechanically tested and passed the lap-shear tension, cross-tension, and fatigue cycling tests. The t-peel test configuration never passed the minimum requirements. The purpose …

Reservoir Sedimentation: The Economics Of Sustainability, Matthew William George

Theses and Dissertations

Despite mounting demand for a more sustainable worldwide water supply system, available reservoir capacity is relentlessly diminishing due to sedimentation. This fact, coupled with a decrease in the rate of dam construction, indicate an impending water supply dilemma. In the future, dams should be designed following a life cycle management approach rather than the typical short-sighted design life technique.Neither sustainable reservoir lifespans nor intergenerational equity is achieved through conventional cost-benefit analyses (CBA), which render all benefits and costs projected to occur more than several decades into a project as negligible. Consequently, future expenditures, including dam decommissioning or retrofitting with sediment …

Finite Element Modeling Of Shallowly Embedded Connections To Characterize Rotational Stiffness, Trevor Alexander Jones

Theses and Dissertations

Finite element models were created in Abaqus 6.14 to characterize the rotational stiffness of shallowly embedded column-foundation connections. Scripts were programmed to automate the model generation process and allow study of multiple independent variables, including embedment length, column size, baseplate geometry, concrete modulus, column orientation, cantilever height, and applied axial load. Three different connection types were investigated: a tied or one part model; a contact-based model; and a cohesive-zone based model. Cohesive-zone modeling was found to give the most accurate results. Agreement with previous experimental data was obtained to within 27%. Baseplate geometry was found to affect connection stiffness significantly, …

Lateral Resistance Of H-Piles And Square Piles Behind An Mse Wall With Ribbed Strip And Welded Wire Reinforcements, Andrew I. Luna

Theses and Dissertations

Bridges often use pile foundations behind MSE walls to help resist lateral loading from seismic and thermal expansion and contraction loads. Overdesign of pile spacing and sizes occur owing to a lack of design code guidance for piles behind an MSE wall. However, space constraints necessitate the installation of piles near the wall. Full scale lateral load tests were conducted on piles behind an MSE wall. This study involves the testing of four HP12X74 H-piles and four HSS12X12X5/16 square piles. The H-piles were tested with ribbed strip soil reinforcement at a wall height of 15 feet, and the square piles …

Micro-Ct Inspection Of Impact Damage In Carbon/Epoxy Rods, Lindsey Charlene Cahoon

Theses and Dissertations

Various configurations of unidirectional carbon/epoxy composite rods were impacted radially, inspected using micro-CT scanning equipment, and tested in axial compression to measure the residual strength after impact. This data was used to correlate the relationship between impact energy, residual strength, and the peak crack area and total crack volume along the length of the specimens. These specimens represent local members of open three-dimensional composite lattice structures (e.g., based on isogrid or IsoTruss® geometries) that are continuously fabricated using advanced three-dimensional braiding techniques. The specimens were radially impacted with 2.5 J (1.9 ft-lbs), 5.0 J (3.7 ft-lbs), 7.5 J (5.6 ft-lbs), …

Computing Research In Academia: Classifications, Keywords, Perceptions, And Connections, Sung Han Kim

Theses and Dissertations

The Association for Computing Machinery (ACM) recognizes five computing disciplines: Computer Science (CS), Computer Engineering (CE), Information Technology (IT), Information Systems (IS), and Software Engineering (SE). Founded in 1947 the ACM is the world's largest society for computing educators, researchers, and professionals. While Computer Science has been a degree program since 1962, the other four are relatively new. This research focuses on understanding the graduate research in four of the five ACM disciplines (CS, CE, IT, and IS) using a large body of thesis and dissertation metadata. SE is not found in the metadata and graduate work in SE is …

Roadway Safety Analysis Methodology, Samuel Thomas Mineer

Theses and Dissertations

The Utah Department of Transportation (UDOT) Traffic and Safety Division continues to advance the safety of the state roadway network through network screening and decision making tools. In an effort to aid UDOT in meeting this goal, the Department of Civil and Environmental Engineering at Brigham Young University (BYU) has worked with the Statistics Department in developing analysis tools for highway safety, specifically the Utah Crash Prediction Model (UCPM) and the Utah Crash Severity Model (UCSM). Additional tools and methodologies, such as the "Hot Spot Identification and Analysis," have been created to summarize the roadway characteristics, crash data, and possible …

Implementation Of Bim In The Municipal Plan Review Process, Liz Shantalle Ricardo Belliard

Theses and Dissertations

Obtaining a building permit is an important step for any construction project. Whether it is for a new construction or a remodel job, the process involves a plan review performed by building officials. The purpose of this research was to explore ways in which Building Information Modeling (BIM) could be used to aid code officials during the plan review process. The objectives of the study were to determine if the level of detail in BIM was complete enough to allow a plan review to be perform accurately, to identify the extent to which architects are comfortable with using their models …

An Overview Of Current Applications, Challenges, And Future Trends In Distributed Process-Based Models In Hydrology, Simone Fatichi, Enrique R. Vivoni, Fred L. Ogden, Valeriy Y. Ivanov, Benjamin Mirus, David Gochis, Charles W. Downer, Matteo Camporese, Jason H. Davidson, Brian Ebel, Norm Jones, Jongho Kim, Giuseppe Mascaro, Richard Niswonger, Pedro Restrepo, Riccardo Rigon, Chaopeng Shen, Mauro Sulis, David Tarboton

Faculty Publications

Process-based hydrological models have a long history dating back to the 1960s. Criticized by some as over-parameterized, overly complex, and difficult to use, a more nuanced view is that these tools are necessary in many situations and, in a certain class of problems, they are the most appropriate type of hydrological model. This is especially the case in situations where knowledge of flow paths or distributed state variables and/or preservation of physical constraints is important. Examples of this include: spatiotemporal variability of soil moisture, groundwater flow and runoff generation, sediment and contaminant transport, or when feedbacks among various Earth’s system …

Mentored Environment For Isogeometric Analysis, Kevin Tew, Michael Scott

Journal of Undergraduate Research

The mentored environment for isogeometric analysis (IGA) has trained engineering and computer science students to develop isogeometric numerical methods and accompanying software to solve challenging problems in science and engineering. The mentoring environment consisted of:

1. Weekly group meetings where research concepts were discussed, scientific literature was reviewed, and progress was monitored.
2. Pairing of students with a faculty members to develop IGA design-through-analysis methodologies.
3. Preparation of results for peer-reviewed publications.

Meg Report: Elastic Frames For Earthquake Resistance, Paul Richards

Journal of Undergraduate Research

The topic of the proposal was steel frames with superior elastic energy capacity that will permit buildings to better withstand severe earthquake loading. The anticipated outcomes related to mentoring were: each student researcher would be the lead author on a conference publication, students would present results at a national conference, and each student researcher would be a co-author on a journal article; with the graduate student researcher as a lead author.

Lateral Resistance Of Pipe Piles Behind A 20-Foot-Tall Mse Wall With Welded-Wire Reinforcements, Ryan Thomas Budd

Theses and Dissertations

Pile foundations for bridges must often resist lateral loads produced by earthquakes and thermal expansion and contraction of the superstructure. Right-of-way constraints near bridge abutments are leading to an increased use of mechanically stabilized earth (MSE) walls below the abutment. Previous research has shown that lateral pile resistance can be greatly reduced when piles are placed close to MSE walls but design codes do not address this issue. A full-scale MSE wall was constructed and 24 lateral load tests were conducted on pipe, square and H piles spaced at distances of about 2 to 5 pile diameters from the back …

The Influence Of Pile Shape And Pile Sleeves On Lateral Load Resistance, Dalin Newell Russell

Theses and Dissertations

The lateral resistance of pile foundations is typically based on the performance of round piles even though other pile types are used. Due to lack of data there is a certain level of uncertainty when designing pile foundations other than round piles for lateral loading. Theoretical analyses have suggested that square sections will have more lateral resistance due to the increased side shear resistance, no test results have been available to substantiate the contention. Full-scale lateral load tests involving pile shapes such as circular, circular wrapped with high density polyethylene sheeting, square, H, and circular with a corrugated metal sleeve …

Simple Models For Estimating The Rotational Stiffness Of Steel Column-To-Footing Connections, Joshua Edwin Tryon

Theses and Dissertations

Despite the crucial role they play in transferring loads from the superstructure to the foundation, steel column-to-footing connections have received little attention in research. Though shallow embedded connections are typically characterized as pinned, studies have shown that they exhibit significant rotational stiffness. The objective of this thesis is to quantify the rotational stiffness of such connections. A method named the continuum model is developed by which the rotational stiffness of embedded connections may be calculated. Outputs from this model are compared with experimental data on steel connections embedded in concrete. The continuum model is shown to be capable of reasonably …

Evaluation Of Passive Force On Skewed Bridge Abutments With Controlled Low-Strength Material Backfill, Kevin Bjorn Wagstaff

Theses and Dissertations

Although its use has become more widespread, controlled low-strength material, or CLSM, has fallen through the crack between geotechnical engineering and materials engineering research. The National Ready Mix Association states that CLSM is not a low strength concrete, and geotechnical engineers do not consider it as a conventional aggregate backfill. The use of CLSM as a bridge abutment backfill material brings up the need to understand the passive force versus backwall displacement relationship for this application. To safely account for forces generated due to seismic activity and thermal expansion in bridge design, it is important to understand the passive force …