Civil and Environmental Engineering Commons^™

Development And Localisation Of Ultra High Performance Concrete Using A Particle Packing Model, William Wilson, Tomas O'Flaherty

Civil Engineering Research in Ireland 2020

Ultra-high performance fibre reinforced concrete (UHPFRC) is used worldwide to improve the structural performance of infrastructure such as bridges, extend their working life and reduce environmental impact. As a result thinner structures are constructed leading to reductions in the structure’s self-weight and the volume of concrete and natural raw aggregates used in their construction. A drawback to UHPFRC is that it results in a significant rise in initial costs over normal and even high performance concretes, and it has very high binder contents, which in some cases is greater than 1100kg/m³. Therefore, the cost-efficiency and sustainability of this …

Effects Of Accelerated Carbonation Curing On Co2 Sequestration And On The Compressive Strength Of Concrete Masonry Units, Barry Gilroy, Leon Black, David Thompson, Ronan Hogan, Niall Holmes

Civil Engineering Research in Ireland 2020

The global consumption of Portland cement has risen to over 4 billion tonnes per annum. Its manufacture is energy and carbon intensive and approximately 900 kg of CO₂ is emitted into the atmosphere for each tonne of Portland cement produced. The International Energy Agency (IEA) roadmap sets out a goal to reduce emissions due to cement production to 18 % below 2006 levels by 2050.

Concrete has the potential to re-absorb CO₂ by the process of carbonation, where it reacts with CaO in the concrete to form calcium carbonate. Accelerated carbonation curing (ACC) is a technique for curing …

Towards Improved Sensor Systems For Bridge Structural Health Monitoring, Alan Ferguson, Roger Woods, David Hester

Civil Engineering Research in Ireland 2020

Taking long-term measurements on in-service bridges is challenging due to the lack of easy access to power and communications. Whilst all-in-one, portable sensor data loggers act to address these challenges, they still lack the flexibility to meet evolving measurement needs. This paper presents the design and implementation of a highly flexible, modular sensor system for bridge structural health monitoring research, which has an emphasis on customisability and extensibility to allow it to meet evolving challenges. The architecture incorporates interchangeable sensor modules that allows data acquisition to an on-board Secure Digital card, with timing and synchronisation provided by global positioning system …

Towards Automated Uav Assisted Bridge Inspections Using Photogrammetry And Image Processing Techniques, Habeene Habeenzu, Patrick Mcgetrick, David Hester, Su Taylor, Louie Wong

Civil Engineering Research in Ireland 2020

At the heart of addressing bridge condition challenges are bridge inspections. The main activity during a bridge inspection is close, arm’s length visual inspection of the entire bridge structure. During this process, all defects such as cracks, spalls and material degradation are manually recorded on the bridge itself and on inspection forms. Where access is difficult such as where a safe working platform cannot be mounted under bridge decks, or on high bridges, expensive underbridge equipment is required which when used results in expensive lane closures. Furthermore, visual inspections have been shown to lack consistency from inspector to inspector and …

Acceleration Based Bridge Weigh In Motion Using Moving Force, Shou Wang, Daniel Mccrum, Eugene O'Brien

Civil Engineering Research in Ireland 2020

Measuring vehicle axles weights is an important method to control traffic and monitor infrastructure. Traditional methods of measuring the static weight of vehicles at a weigh station is disruptive and time consuming. It is more cost effective and efficient to indirectly measure moving vehicle weights crossing a bridge. The weigh-in-motion concept, first proposed by Moses (1979) is an algorithm that uses measured bridge structural response (deflection, strain, …) due to passing vehicles to and a theoretical response. Moving Force identification (MFI) is a variation of the dynamic WIM algorithm that gives a force time history as a vehicle passes the …

A Two-Stage Direct Integration Approach To Find The Railway Track Profile Using In-Service Trains, Yifei Ren, Jennifer Kennahan, Eugene O'Brien

Civil Engineering Research in Ireland 2020

The railway track is an important element in transportation networks. In recent years, drive-by monitoring of railways has become more popular. Using data measured from in-service trains, the railway profile can be found. In previous research, a complex optimiziton method is used to calculate the railway profile. This paper introduces a new two-stage direct integration approach to find the same track profile much more efficiently. The calculated track profile is similar to a ‘true’ profile and can be used to monitor the condition of the track.

Investigating The Contact-Point Response For Drive-By Damage Detection In Bridges, Robert Corbally, Abdollah Malekjafarian

Civil Engineering Research in Ireland 2020

Bridges are critical elements in any road or rail transport network and ensuring their safety is paramount. Recent years have seen significant research efforts to develop cost-effective techniques for bridge monitoring on a large scale. Drive-by bridge inspection techniques, whereby sensors inside a vehicle are used to monitor bridge condition, are at the focus of much of this work. This paper develops a relationship between the measured response in a vehicle and the contact-point response between the wheel and the surface of a bridge using a quarter-car representation of the vehicle. Numerical simulations are carried out to examine the feasibility …

Application Of The Iec Technical Specification For Assessment Of Wave Energy Resource: A Case Study From The West Coast Of Ireland, Iulia Anton, Stephen Nash

Civil Engineering Research in Ireland 2020

There is significant interest globally in harnessing our ocean wave energy resource, estimated at approximately 30,000 TWh/year. The key to this is understanding the resource. The International Electrotechnical Commission (IEC) has developed a technical specification for the evaluation of wave energy resource, IEC-TS 62600- 101: Wave energy resource assessment and characterization. This research applies the IEC standard for a resource characterization study of the Atlantic Marine Energy Test Site on the west coast of Ireland. A key focus is the comparison of the detailed IEC validation approach using scatter diagrams with the traditional timeseries validation approach. Coarse (0.005°) and fine …

Wind Power Prediction And Early Downtime Detection For Ireland, Vikram Pakrashi, Basuraj Bhowmik, Juan Manuel González-Sopeña, Paul Mucchielli, Bidisha Ghosh

Civil Engineering Research in Ireland 2020

Wind energy must be commercially competitive to be economically sustainable. Existing wind farms in Ireland must be more efficient to meet the 2009 EU Renewable Energy Directive target of 7% of total energy demand from onshore wind energy farms, which is 45% of the total national renewable energy target of 16%. WindPearl - a Sustainable EnergyAuthority of Ireland (SEAI) funded project is currently looking into improvin operations & maintenance (O&M) of onshore wind turbine farms in Ireland.

An Experimental Investigation Of The Optimum Properties And Conditions For Use Of Anionic Emulsions In Road Maintenance Applications, Simonas Ignatavicius, Alan Kavanagh, David Colleran, Michael J. Brennan, Shane Newell

Civil Engineering Research in Ireland 2020

Bitumen emulsions are used for a range of road maintenance applications, including surface dressing, gravel seals, slurry seals, tack coating, cold-mix asphalt and in situ pavement recycling. The emulsions used can be classified as being either cationic (i.e. possessing a positive electrostatic surface charge) or anionic (i.e. carrying a negative electrostatic surface charge). The vast majority of emulsions used for such applications in Europe are cationic, while anionic bitumen emulsions are used widely throughout North America and Africa. The aims of the experimental study described in this paper were (a) to investigate why one or the other emulsion type is …

A Review Of Vision Based Methods For Pothole Detection And Road Profile Analysis, Darragh Lydon, Su Taylor, Myra Lydon, Julia Early

Civil Engineering Research in Ireland 2020

This paper is an overview of the development and application of Computer Vision for the detection of pothole, pavement distress and road profile analysis and categorisation. A brief explanation of the traditional methods for determining these factors is given, followed by a chronological description of the evolution and the challenges of using Computer Vision (CV) approaches to determine these conditions. The paper is separated into sections aligned to image capture and analysis methodologies. Qualitative evaluations and comparison of these methods have been provided along with the proposal of guidelines for new computer vision-based road analysis systems.

Analysis And Optimisation Of Tii’S Pams Reset Values And Deterioration Models For Irish Pavement Conditions, James Quinn, Raymond Mcgowan, Tomas O'Flaherty

Civil Engineering Research in Ireland 2020

Ireland has a national road network of approximately 5300km that is managed by Transport Infrastructure Ireland (TII). TII create yearly pavement maintenance and renewal programs from the operation of a Pavement Asset Management System (PAMS). Accurate pavement deterioration models and reset values are an essential part of PAMS and are required for life cycle cost analysis (LCCA). Pavement maintenance and renewal schemes are prioritised based on the LCCA's largest benefit to cost ratio, and therefore optimise the annual pavement maintenance and renewal budget. Currently, TII implement pavement deterioration models and reset values from Austria's and Belgium's PAMS, and are not …

An Analysis Of The Effectiveness Of Bitumen Additives On The Performance Of Pavement Surface Dressings, Alan Anderson, John Casserly, Alan Kavanagh, Jim Campbell

Civil Engineering Research in Ireland 2020

Surface dressing is a maintenance technique that uses thin layers of bitumen emulsion and single sized aggregates. The surface dressing process seals and binds the surface of a road to protect its substructure from water ingress. It also provides increased skid resistance, which improves safety for road users. Early life chip-loss can occur if there is an insufficient degree of adhesion between the emulsion and aggregate used. The range of additives used in bitumen can have an effect on their adhesion properties. The focus of this research project was to investigate if the use of these additives in surface dressing …

Winter Maintenance On The Irish Road Network, Hugh Mcconnell, Brian Mccann

Civil Engineering Research in Ireland 2020

Winter maintenance relates to those activities undertaken where the objective is to minimise the impact of frost, ice or snow on the travelling public. The responsibility for winter maintenance of all roads in Ireland currently rests with local authorities and Transport Infrastructure Ireland (TII) (Formerly the NRA) on behalf of the Department of Transport, Tourism and Sport (DTTaS), (DTTaS, 2017). The aim of the study was to examine current winter maintenance practices undertaken in Ireland by local authorities and the Motorway Maintenance and Renewals Contracts (MMaRC) contractors and examine the potential financial, operational and environmental benefits if pre-wet and brine …

An Experimental Investigation Of The Optimum Properties And Conditions For Use Of Anionic Emulsions In Road Maintenance Applications, Simonas Ignatavicius, Alan Kavanagh, David Colleran, Michael J. Brennan, Shane Newell

Civil Engineering Research in Ireland 2020

Bitumen emulsions are used for a range of road maintenance applications, including surface dressing, gravel seals, slurry seals, tack coating, cold-mix asphalt and in situ pavement recycling. The emulsions used can be classified as being either cationic (i.e. possessing a positive electrostatic surface charge) or anionic (i.e. carrying a negative electrostatic surface charge). The vast majority of emulsions used for such applications in Europe are cationic, while anionic bitumen emulsions are used widely throughout North America and Africa. The aims of the experimental study described in this paper were (a) to investigate why one or the other emulsion type is …

A Review Of Vision Based Methods For Pothole Detection And Road Profile Analysis, Darragh Lydon, S. E. Taylor, Myra Lydon, Julia Early

Civil Engineering Research in Ireland 2020

This paper is an overview of the development and application of Computer Vision for the detection of pothole, pavement distress and road profile analysis and categorisation. A brief explanation of the traditional methods for determining these factors is given, followed by a chronological description of the evolution and the challenges of using Computer Vision (CV) approaches to determine these conditions. The paper is separated into sections aligned to image capture and analysis methodologies. Qualitative evaluations and comparison of these methods have been provided along with the proposal of guidelines for new computer vision-based road analysis systems.

Analysis And Optimisation Of Tii’S Pams Reset Values And Deterioration Models For Irish Pavement Conditions, James Quinn, Raymond Mcgowan, Tomas O'Flaherty

Civil Engineering Research in Ireland 2020

Ireland has a national road network of approximately 5300km that is managed by Transport Infrastructure Ireland (TII). TII create yearly pavement maintenance and renewal programs from the operation of a Pavement Asset Management System (PAMS). Accurate pavement deterioration models and reset values are an essential part of PAMS and are required for life cycle cost analysis (LCCA). Pavement maintenance and renewal schemes are prioritised based on the LCCA's largest benefit to cost ratio, and therefore optimise the annual pavement maintenance and renewal budget. Currently, TII implement pavement deterioration models and reset values from Austria's and Belgium's PAMS, and are not …

An Analysis Of The Effectiveness Of Bitumen Additives On The Performance Of Pavement Surface Dressings, Alan Anderson, John Casserly, Alan Kavanagh, Jim Campbell

Civil Engineering Research in Ireland 2020

Surface dressing is a maintenance technique that uses thin layers of bitumen emulsion and single sized aggregates. The surface dressing process seals and binds the surface of a road to protect its substructure from water ingress. It also provides increased skid resistance, which improves safety for road users. Early life chip-loss can occur if there is an insufficient degree of adhesion between the emulsion and aggregate used. The range of additives used in bitumen can have an effect on their adhesion properties. The focus of this research project was to investigate if the use of these additives in surface dressing …

Winter Maintenance On The Irish Road Network, Hugh Mcconnell, Brian Mccann

Civil Engineering Research in Ireland 2020

Winter maintenance relates to those activities undertaken where the objective is to minimise the impact of frost, ice or snow on the travelling public. The responsibility for winter maintenance of all roads in Ireland currently rests with local authorities and Transport Infrastructure Ireland (TII) (Formerly the NRA) on behalf of the Department of Transport, Tourism and Sport (DTTaS), (DTTaS, 2017). The aim of the study was to examine current winter maintenance practices undertaken in Ireland by local authorities and the Motorway Maintenance and Renewals Contracts (MMaRC) contractors and examine the potential financial, operational and environmental benefits if pre-wet and brine …

Study The Effect Of Damping Change During The Dynamic Analysis Of A Reinforced Concrete Bridge With Neoprene Cushions, Mais Ghassoun

Emirates Journal for Engineering Research

The damping ratio has a important effect on the dynamic behavior of the bridges. and it is customary when designing to assume it as a predetermined fixed value independent of the response amplitude and frequency of the structure . A lot of experimental research worked on identifying them, but the dependence of damping and other dynamic characteristics of vibration amplitudes and their impact on responses and the results of the analysis need more scrutiny and simulation due to the difficulty of conducting vibration experiments for structures of realistic dimensions and large weights such as a RC bridge, which necessitated a …

Pooled-Fund Project No. Tpf-5(395), Genda Chen

INSPIRE-UTC Annual Meetings

The goals of the pooled-fund initiative are to engage closely with several state Departments of Transportation (DOTs) in the early stage of technology development at the INSPIRE University Transportation Center, and leverage the center resources to develop case studies, protocols, and guidelines that can be adopted by state DOTs for bridge inspection without adversely impacting traffic. The initiative involves the integration, field demonstration and documentation of a robotic system of structural crawlers, unmanned aerial vehicles, a multimodal unmanned vehicle, nondestructive devices, sensors, and data analytics. Depending on the interest of participating DOTs, the objectives of this initiative include, but are …

Vision-Based Non-Gps Uav Guidance For Bridge Inspection, Bo Shang

INSPIRE-UTC Annual Meetings

No abstract provided.

Uav-Based Smart Rock Localization For Determination Of Bridge Scour Depth, Haibin Zhang

INSPIRE-UTC Annual Meetings

First Place Award in recognition of outstanding achievement in the 2020 Annual Meeting Graduate Student Poster Competition sponsored by INSPIRE University Transportation Center

Bridge Inspection Video Data Analysis For Data-Driven Asset Management, Muhammad Monjurul Karim

INSPIRE-UTC Annual Meetings

Second Place Award in recognition of outstanding achievement in the 2020 Annual Meeting Graduate Student Poster Competition sponsored by INSPIRE University Transportation Center

Automatic Impact-Sounding Acoustic Inspection Of Concrete Structure, Jinglun Feng

INSPIRE-UTC Annual Meetings

No abstract provided.

Experimental Investigation Of A Novel Smart Shear Key For Earthquake And Tsunami Mitigation, Xinzhe Yuan

INSPIRE-UTC Annual Meetings

No abstract provided.

Autonomous Ultrasonic Thickness Measurement Of Steel Bridge Members Using Mobile Sensors, Yu Otsuki

INSPIRE-UTC Annual Meetings

Third Place Award in recognition of outstanding achievement in the 2020 Annual Meeting Graduate Student Poster Competition sponsored by INSPIRE University Transportation Center

Data-Driven Risk Assessment Of Bridges Subject To Corrosion And Scour, Yijian Zhang

INSPIRE-UTC Annual Meetings

No abstract provided.

Clamping Design For Bridge Inspection Robot Deployment Systems (Birds) Prototype Ii, Bo Shang

INSPIRE-UTC Annual Meetings

No abstract provided.

Bridge Resilience Assessment With Inspire Data, Iris Tien

INSPIRE-UTC Annual Meetings

Robotic data collection, both automated and remote, will enable post-disaster assessment of bridge components where it would normally be difficult and potentially dangerous for manual inspection by field workers to do so.

This project aims to develop and validate a new framework that uses the data collected from the robotic exploration of infrastructure, particularly after a disaster, to assess the condition of bridges and prioritize these structures for repair. This will improve the resilience of the transportation system to disasters by targeting bridge repairs and enabling resources to be distributed more effectively across the system for more rapid recovery after …