Civil and Environmental Engineering Commons^™

Review Of Testing By Analysis For Potential Implementation Into Aisi Standards, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

New product development is crucial to allow innovation in the cold-formed steel structural industry. However, the required physical testing of new components and assemblies are often a cost barrier which prevents implementation and slows new product development. Testing by analysis can be a good alternative to physical testing as it reduces the expense and time for performing physical experiments, however, two considerations are necessary to ensure accurate results. First, it requires a rational engineering analysis to calculate the capacities and deformations of the system, and the requirements to produce accurate analyses must be explicitly stated. Second, it is necessary to …

Steel Diaphragm Innovation Initiative, Year 5, Final Report, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

Summary

The Steel Diaphragm Innovation Initiative (SDII) is a multi-year industry-academic-government partnership to advance the seismic performance of steel floor and roof diaphragms utilized in steel buildings. This report provides a final report for Year 5 of the overall 5-year SDII plan. Contributions in the final 12 months (1 Jan. 2020 – 31 Dec. 2020) include the following highlights.

Innovation and Practice:

• Adoption in ASCE 7 of new provisions for bare steel deck including methods for buildings with rigid walls and flexible diaphragms, alternative diaphragm design with R_s, and special seismic detailing (following on from successful adoption in …

Tutorials For Mastan 2 And Related Validation, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

This report creates the tutorials helping engineers to correctly model and analyze structural systems comprised of non-doubly symmetric sections using the latest version of MASTAN2. The report also validated a MASTAN2 model using non-doubly symmetric sections against results from a small test program. The following report and tutorials are provided:

AISI Small Project Summary – Tutorials for MASTAN2 and Related Validation

• Tutorial for MASTAN2 v5.1 - Introductory Frame
• Tutorial for MASTAN2 v5.1 - Pour Stop Beam
• Tutorial for MASTAN2 v5.1 - Steel Joist

Quantitative Evaluation Of Asphalt Binder Extraction From Hot Mix Asphalt Pavement Using Ashing And Centrifuge Methods, Ahmed Hemida, Magdy Abdelrahman, Eslam Deef-Allah

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt binder requires more investigation to be accurately and precisely extracted since it is an effective procedure for quality assurance quality control (QA/QC) and subsequent binder characterization. In this research, the authors presented a hands-on experience with binder extraction to deliver recommendations concerning the sensitive steps that may affect the outcomes (extracted binder content, P_be%). Two mineral matter determination methods (ashing and centrifuge) were addressed based on the centrifuge extraction method. Field cores were investigated by comparing the P_be% to the actual binder content, P_ba%. Analysis of variance (ANOVA) and Tukey Post-Hoc statistical analyses, …

Low-Cost Modal Identification Sensors For Bridge Field Testing, Daniel Linzell, Saaed Eftekhar Azam, Samira Ardani, Ahmed E Rageh

Nebraska Department of Transportation: Research Reports

This report provides a framework for experimental load rating of bridges via inclusion of low-cost dynamic sensors and dynamic tests. Currently 25% of the bridges in Nebraska are posted for live load. According to the National Bridge Inventory (NBI) in 2012, 93% of all postings in the US were based analytical load ratings, 7% were posted using field evaluation and engineering judgement, and 1% were posted using experimental load rating methods.

Instrumentation costs and traffic interruptions can be problematic when load testing is necessary to accurately assess in-situ bridge live load capacity. Recent advances in (i) sensing technology and (ii) …

Final Report - Autonomous Wall-Climbing Robots For Inspection And Maintenance Of Concrete Bridges, Jizhong Xiao, Liang Yang, Jinglun Feng, Ejup Hoxha

Project AS-3

This project developed wall-climbing robots to carry non-destructive evaluation (NDE) devices for automatic data collection and surface/subsurface defect detection in concrete structures. By using simultaneous localization and mapping (SLAM), the robots can be located to allow for incremental 3D model reconstruction. An image dataset with pixel-level accuracy is collected and labeled to train a deep neural network (i.e., InspectionNet) with 12,000 iterations for each defect type. A ground penetrating radar (GPR)-based subsurface object detection method is proposed to implement visual inertial fusion for the estimation of the GPR pose, use a deep neural network module (i.e., DepthNet) to extract hyperbola …

Flood Hazard Assessment For The Tori Levee Breach Of The Indus River Basin, Pakistan, Babar Naeem, Muhammad Azmat, Hui Tao, Shakil Ahmad, Muhammad Umar Khattak, Sajjad Haider, Sajjad Ahmad, Zarif Khero, Christopher R. Goodell

Civil and Environmental Engineering and Construction Faculty Research

Levee breaches are some of the most common hazards in the world and cause the loss of lives, livelihoods, and property destruction. During the 2010 flood in Pakistan, the most devastating breach occurred at Tori Levee on the right bank of the Indus River, downstream of the Guddu Barrage, which caused residual floods in northern Sindh and the adjoining regions of the Balochistan province. In this study, 2D unsteady flow modeling performed for Tori Levee breach computed residual flood inundation by coupling a HEC-RAS (Hydrological Engineering Centre-River Analysis System) 2D hydraulic model with remote sensing and Geographic Information System techniques. …

Machine Learning Enables Prompt Prediction Of Hydration Kinetics Of Multicomponent Cementitious Systems, Jonathan Lapeyre, Taihao Han, Brooke Wiles, Hongyan Ma, Jie Huang, Gaurav Sant, Aditya Kumar

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Carbonaceous (e.g., limestone) and aluminosilicate (e.g., calcined clay) mineral additives are routinely used to partially replace ordinary portland cement in concrete to alleviate its energy impact and carbon footprint. These mineral additives—depending on their physicochemical characteristics—alter the hydration behavior of cement; which, in turn, affects the evolution of microstructure of concrete, as well as the development of its properties (e.g., compressive strength). Numerical, reaction-kinetics models—e.g., phase boundary nucleation-and-growth models; which are based partly on theoretically-derived kinetic mechanisms, and partly on assumptions—are unable to produce a priori prediction of hydration kinetics of cement; especially in multicomponent systems, wherein chemical interactions among …

A High-Temperature-Resistant Inorganic Matrix For Concrete Structures Enhanced By Fiber-Reinforced Polymer, Jing Zhu, Wenzhong Zheng, Lili Xie, Lesley Sneed

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper probed deep into a high-temperature resistant inorganic matrix: alkali-activated slag cement (AASC), which is a kind of cementitious material prepared by alkali-activator and pozzolanic or latent hydraulic material. Firstly, the mix ratio of the AASC was optimized to improve the wettability and mechanical properties. Then, the effects of the adhesive matrix and the type of fiber-reinforced polymer (FRP) were observed through FRP-to-concrete bond tests on 93 specimens. The test results, coupled with anchorage analysis, indicate that the AASC has comparable reinforcing effects as those of organic epoxy matrix; the anchorage length of FRP sheets has a significant influence …

Exploring The Effect Of In-Plane Tensile Forces On The Two-Way Shear Strength: Review, Comparative Study And Future Works, Ahmed F. Deifalla, Eslam Mousa, Dina Yehia, Amr Abdelrahman

Future Engineering Journal

Two-way shear failure of slabs is a sudden one, which has catastrophic outcomes. Slabs with large spans may be subjected to in-plane tensile forces due to thermal or earthquake loading. There is a lack of agreement between various design codes regarding the significance of in-plane tensile forces on the two-way shear strength.

Two-way shear failure of slabs is a sudden one, which has catastrophic outcomes. Slabs with large dimensions may be subjected to in-plane tensile forces due to restraint or earthquake loading. There is a lack of agreement between various design codes regarding the significance of in-plane tensile forces on …

Effect Of Reinforcement Around Web Opening On The Cyclic Behavior Of Exterior Rc Beam-Column Joints, Ahmed F. Deifalla, Amin Saleh, Sherif Elwan, Mostafa Hamad, Sherif Elzeiny

Future Engineering Journal

In many situations, it is necessary to have a beam web opening in the plastic hinge location. However, very limited studies investigated the behavior of reinforced concrete (RC) beam-column joints with nearby beam web openings. A previous study was conducted for investigating the behavior of beam-column joints with unreinforced nearby web opening. In this study, the effect of adding additional reinforcing around a nearby web opening on the seismic behavior of RC exterior Beam-Column joints is being investigated. Nine full-scale beam-column joints were tested, four joints had an unreinforced opening, while five joints had reinforced opening. The behavior of the …

Optimum Cross Section And Longitudinal Profile For Unstiffened Fully Composite Steel Beams, Ahmed M. Ebid Dr.

Future Engineering Journal

Composite steel beam is commonly used element in multistory steel buildings today. The composite action between the concrete deck and the steel beam reduces both steel weight and deflection, accordingly, enhance floor economy and serviceability. Many earlier researches were carried out to optimize the design of the composite steel beams under both static loading and dynamic behavior. None of these researches was concerned in optimizing the cross section or the longitudinal profile of built-up composite steel beams. The aim of this research is to develop simple and practical equations to determine the optimum cross section dimensions and optimum longitudinal profile …

A Critical Analysis Of The Application Of Augmented Reality (Ar) For Monitoring And Documentation Of Construction Site Progress In The Irish Aec Industry., Bim Tudublin, Lukasz Sarnot

Capstone Reports

Sarnot, L. (2021) A critical analysis of the application of augmented reality (AR) for monitoring and documentation of construction site progress in the Irish AEC industry, Capstone Project from the MSc in aBIMM

An Examination Of The Use Of Geotechnical Bim To Provide Value Engineering Solutions For Coastal Infrastructure., Bim Tudublin, Eric Brennan

Capstone Reports

The digitisation of construction is taking root as Building Information Modelling is becoming more prevalent across the industry. From an Irish context, the adoption rate of BIM has been slow; nationally its advantages and merits have been welcomed and the appropriate government support is either available, soon to be implemented or in the early conceptual stage. Within the Irish governments Project Ireland 2040 framework there are significant infrastructure developments looming ahead, in particular regarding ports and harbours. The importance of this type of infrastructure is only further compounded due to the UK’s departure from the EU and the need for …

Climate Resilience: Examination Of Revised Heat Transfer Models In The Enhanced Integrated Climatic Model For Pavement Temperature Prediction, Austin Michael Jarrell

Theses, Dissertations and Capstones

The Mechanistic Empirical Pavement Design Guide (MEPDG) is commonly referenced as the state-of-the-practice for the analysis and design of new and rehabilitated pavement assets. The Enhanced Integrated Climatic Model (EICM) incorporated within the MEPDG is a well-recognized and standardized method for estimating temperature profiles in pavements; temperature is a portion of the climate inputs in the MEPDG. Many have already begun to convert atmospheric temperature predictions from externally based climate models into the MEPDG to create robust designs for climate change. As pavement designers and researchers seek robust solutions while formulating resilient pavement designs, it is likely that the EICM …

Balsa Wood Bridge, Andrew Harris

All Undergraduate Projects

Faculty at Central Washington University proposed a challenge to mechanical engineering students that could be accomplished in an in-home setting. The goal was to create a balsa wood bridge, weighing no more than 85 grams, that can support a load over an open span and raise above its resting position by means of a mechanical system. To produce a successful solution to the problem, a vertical lift bridge was created consisting of two lifting towers and a load bearing bridge. Using equations of static equilibrium and strength of materials, the required width for each member was determined. Project requirements were …

Inspire Newsletter Spring 2021, Missouri University Of Science And Technology. Inspire - University Transportation Center

INSPIRE Newsletters

No abstract provided.

Inspire Newsletter Fall 2021, Missouri University Of Science And Technology. Inspire - University Transportation Center

INSPIRE Newsletters

No abstract provided.

To What Extent Can Innovative International Project Delivery Strategies (Which Leverage Bim) Improve The Cost Certainty Of Large Complex Public Procurement Projects In The Context Of Irish Public Procurement?, Bim Tudublin, Roqaya Abouklaib

Capstone Reports

Cost overrun is one of the biggest issues in the construction sector, and cost certainty is one of the main aims of the public construction sector in Ireland. Studies have shown that multi-disciplinary collaboration will benefit a construction project throughout its lifecycle. BIM, Lean, and IPD are independent methodologies that encourage collaborative work, and there are existent effective synergies among these concepts. The synergetic innovative international strategies were utilised for delivering large complex projects successfully globally, and many authors have studied large complex public projects that have adopted innovative international project delivery strategies collaboratively and have shown that the cost …

Opportunities In The Irish Reinforced Concrete Industry For Lean And Bim Adoption, Bim Tudublin, Kieran Mcconnell

Capstone Reports

The Irish Reinforced Concrete (RC) sector has yet to realise the full potential of Building Information Modelling (BIM) and Lean construction. The positive impacts and benefits of both BIM and Lean in the wider Architecture, Engineering and Construction sector are widely recognised; many of these are transferable to the RC sector, but there is limited research and knowledge on practical transference, uses and advantages. This research aims to fill some of the existing knowledge gaps by examining BIM and Lean adoption and awareness in the Irish RC sector across sub-sectors, professions, and organisational levels, and by exploring opportunities for increasing …

A Critical Examination Of Visual Programming And Generative Design For The Compliance Checking Of Open Plan Office Layouts Against Hse Guidelines Post Covid-19., Bim Tudublin, Ronan Byrne

Capstone Reports

The purpose of this study is to explore the feasibility of Visual Programming (VP) and Generative Design (GD) in assisting employers review open plan office layouts against Ireland’s HSE guidelines implemented in May 2020 in response to Covid-19. The pandemic has affected all areas of life with workplace standards requiring a complete overhaul. This study will attempt to ascertain compliance with natural ventilation and social distancing requirements through the completion of an experimental research study, utilising Computational Design (CD) tools. A GD study will be undertaken to provide the designer with numerous office layout design solutions to evaluate and evolve. …

To What Extent Can Lean Construction Processes And Principles Be Utilised In The Design Stage Of A Bim Project In The Irish Design And Construction Industry, Bim Tudublin, Barry Sheramn

Capstone Reports

Although different in many ways, Building Information Modelling (BIM) and Lean Construction are two processes that are having a significant impact on the Design & Construction Industry. In recent years, the Irish AECO industry has seen a tenfold increase across numerous construction disciplines with the adoption of new workflows and processes centred around both BIM and Lean methodologies. Existing literature identifies a strong synergistic relationship between the two processes and highlights the opportunity for Lean processes and principles to be implemented into the design stage workflow. This paper investigated existing literature relating to several lean processes currently implemented in the …

Should Acoustic Simulation Technology Be Utilised In Architectural Practice? Does It Have The Potential For Bim Integration?, Bim Tudublin, Keith Harvey

Capstone Reports

The research presented in this paper, firstly, aims to convey the importance of our acoustic environment through focusing on the effects of undesirable acoustic conditions on cognitive abilities in spaces where cognitive performance is of the utmost concern, our learning environments. Secondly, it aims to investigate current state-of-the-art acoustic simulation methods, available platforms, and their levels of interoperability with architectural BIM authoring software. Structured interviews were carried out with 7 Irish architects and architectural technologists to determine if a disconnection between architectural design and acoustic performance exists and to identify the advantages and disadvantages of current workflows for acoustic performance …

Optimisation Of Retrofit Wall Insulation: An Irish Case Study, Rakshit D. Muddu, D M. Gowda, Anthony James Robinson, Aimee Byrne

Articles

Ireland has one of the highest rates of emissions per capita in the world and its residential sector is responsible for approximately 10% of total national CO2 emissions. Therefore, reducing the CO2 emissions in this sector will play a decisive role in achieving EU targets of reducing emissions by 40% by 2030. To better inform decisions regarding retrofit of the existing building stock, this study proposes Optimum Insulation Thicknesses (OIT) for typical walls in 25 regions in Ireland. The calculation of OIT includes annual heat energy expenditure, CO2 emissions, and material payback period. The approach taken is based on Heating …

Hydraulic Balsa Wood Rising Bridge, Kaitlyn Greenfield

All Undergraduate Projects

What is the solution to allowing tall vessels to navigate past a vehicle bridge that is less than 10 [ft] above the water? To answer this question, a balsa wood bridge was designed, constructed, and tested. The bridge needed to articulate by mechanical means, allow for travel through the bridge, and be able to withstand ample force while the main structure only being constructed of balsa wood and glue. The project was analyzed in sections. These sections include: the bridge structure and its members, the hydraulic lift, and the pins needed for the bridge and hydraulic lift to operate. The …

An Approach To Mapping The Development Of Professional Skills In A Structural Engineering Programme, Patrick Crean, Dervilla Niall, Una Beagon, Aimee Byrne, Darren Carthy, Caitríona De Paor, Louise Lynch

Conference Papers

Engineers of the future will be presented with complicated, complex problems and their role in the development of sustainable solutions to global problems will become even more critical. Recent literature highlights the need for the development of a set of professional skills in order to address these challenges. These skills include technical, non-technical and attitudinal skills. This paper describes a case study of a whole-of-programme review of teaching and assessment of professional skills in a structural engineering programme. In a systematic process, lecturing staff mapped the modules they teach against a set of professional skills, which were distilled from literature …

Ground Movements And Vibrations Caused By Impact Pile Driving Of Prestressed Concrete Piles In Central Florida, Jorge Enrique Orozco Herrera

Electronic Theses and Dissertations, 2020-2023

The process of pile driving has been a commonly used method for the installation of deep foundations in Central Florida due to the soil conditions that consist mainly of medium-dense silty sands. Pile driving can generate large vibration levels that might potentially trigger ground deformations in the surrounding soils and cause damage on nearby structures. Currently, design and construction standards provide guidance in terms of ground vibration levels expected during pile driving and establish vibration thresholds to avoid damage on important infrastructure. However, little insight has been given into the amount of ground deformations that soils experience due to pile …

Mechanically Spliced Precast Bridge Columns, Ted Sjurseth

Electronic Theses and Dissertations

Mechanical bar splices provide an alternative to the traditional method of lap splicing to achieve reinforcement bar continuity in reinforced concrete. Even though mechanical bar splices can be used as new precast column connections to accelerate the bridge construction (ABC), The use of bar couplers in the plastic hinge region of bridge columns is prohibited by the current US codes since the effects of bar couplers on the seismic behavior of columns is not fully investigated. A bridge column including precast columns with couplers located in a high seismic region must be designed to handle large inelastic lateral deformations. The …

A Critical Analysis Of How Large Irish Architectural Practices Responded To Initial Covid-19 Restrictions And The Affect Implementing Remote Working Had On Bim Processes, Policies, And People, Bim Tudublin, John Mcenroy

Capstone Reports

The unprecedent events which transpired in the 88-day period from the 31st of December 2019 to the 27th of March 2020 have changed the world in which we live and work. The outbreak of Coronavirus disease 19 (COVID-19) and the ensuing pandemic which has evolved are descripted as one in a hundred-year events. This paper researched and critically analyses the operations which large Irish Architecture firms initiated during this period in order to facilitate the ability of its employees working from a remote location, focusing on how the People, Processes and Policies of BIM (3 Ps of BIM); adapted to …

A Critical Analysis Of The Application Of Visual Programming To Increase Efficiency In Bim Object Metadata Delivery Workflows During The Delivery Phase Of An Asset, Kieran Lakhera O'Shea, Davitt Lamon

Reports

Uniclass 2015 data generally seems to be overlooked in favour of the more valuable COBie data when discussion begins about BIM model metadata and, at present, few studies are devoted to it and its delivery through automated methodologies. Classification is a key part of the BIM process – without the ability to distinguish one object from another a BIM model lacks the definition required for implementing downstream applications such as functional simulations, compliance checking and other automated technologies. The use of classification data is, of course, not the only way of identifying objects but it is currently the only standardised …