Civil and Environmental Engineering Commons^™

Experimental Design And Preliminary Testing For Skewed Special Moment Frame Prequalification, Sara Alimirzaei

Graduate Theses and Dissertations

Special moment frames having specially detailed connections are common in high seismic regions, providing architectural flexibility for passageways and views without brace obstructions. In situations where the building framing layout requires deviation from typical rectangular framing, skew in the moment frame connections may be required. Currently, the AISC prequalified connections only include testing of orthogonal moment frame connections and it is unclear whether the existing design methods can accommodate skew at the beam-to- column connections. To investigate the effect of out-of-plane skew on the performance of reduced beam section special moment frame connections, an experimental test is designed and a …

Development Of An Ultraviolet Absorbance Assay To Estimate Air Entrainer Dosing For Concrete Containing Fly Ash, James Spencer

Graduate Theses and Dissertations

Fly ash is a coal combustion byproduct that can be used as a supplementary cementitious material (SCM) in concrete, offering benefits such as increased workability, durability, and strength. Fly ash can be used as a partial replacement to cement, reducing concrete productions costs and decreasing disposal in landfills. However, variability of fly ash properties (e.g., carbon content, adsorption site density) confounds estimates of the air entraining admixture (AEA) dose needed to achieve a specified air content in concrete. Air entrainment is needed to improve freeze-thaw resistance and limit concrete cracking. The foam index (FI) test is currently used to estimate …

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Aly Mousaad Aly, Faiaz Khaled

Faculty Publications

Large-eddy simulation (LES) has proven to offer superior accuracy in regards to predicting surface pressures compared to the Reynolds-averaged Navier Stokes (RANS) models. However, the primary impediment is the high computational cost associated with LES. The authors attempt to investigate the computational cost and accuracy by employing different sub-grid scale (SGS) models in LES and hybrid RANS-LES models. One of the prerequisites of accurate pressure estimations is to ensure a horizontally homogeneous empty computational domain. This study aims to compare the computational competence qualitatively and quantitatively using an empty domain in regards to the ability to maintain horizontal homogeneity. The …

Analysis Of Shear-Strength In Weathered Shale Strata Along A Highway Slope Failure Site In Northwest Arkansas, Olivia Overton

Civil Engineering Undergraduate Honors Theses

Slope failures cost millions of dollars per year to repair and can be deadly. Accurate modeling of slope conditions, including soil parameters, water table locations, and depth to bedrock, are essential to determining the overall stability of a slope. This project is a continuation of the work completed in 2019 by a former University of Arkansas researcher, Vanessa LeBow. LeBow RocScience used Slide2 modeling software to model two highway embankment slopes in Northwest Arkansas that experienced slope movement to determine whether increased use of geophysical data could increase the accuracy of slope stability models. A parametric study of shear strengths …

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Faiaz Khaled, Aly Mousaad Aly

Faculty Publications

No abstract provided.

Evaluating The Effects Of Seismic Loading On Concrete Reinforced Versus Precast Concrete Slab Floor Systems, Mahima Maharjan

Honors Theses

This thesis is part of the senior design capstone project of Ole Miss Department of Civil Engineering. The seismic loadings for the commercial buildings project located in Oxford, Mississippi are evaluated to fulfill the honor thesis requirement. This thesis follows the codes from American Concrete Institute (ACI), International Building Code (IBC), and ASCE-7/SEI (Minimum Design Loads and Associated Criteria for Buildings and Other Structures/Structural Engineering Institute) to design the gravitational loadings and seismic loadings.

Furthermore, a reinforced concrete slab flooring system is replaced with a precast slab flooring system to analyze the most seismic performance effective floor system for the …

Design Of Load Bearing Wall For Low Rise Building With Partially Grouted Reinforced Masonry, Anil Bhatt

Honors Theses

The seismic and wind load acting on the 2-storeyed building of dimension 120 ft x 98 ft located in Oxford, MS, were calculated and the seismic load was considered for the design of the 120 ft long and 24 ft high load-bearing wall because it being critical. The maximum loading was computed using different load combinations. The masonry behavior and masonry specifications were considered to select the masonry unit, grout, and mortar for the load-bearing wall. The seismic design requirement for the shear and slender wall was fulfilled for the special reinforced masonry wall. The in-plane and out-of-plane loading scenarios …

Improving Logistics Efficiency Through Collaborative Truck Routing, Patrick Dougherty

Industrial Engineering Undergraduate Honors Theses

The logistics industry is among the world’s largest and most essential. Specifically, trucking is a massive component of the modern logistics system. In 2012, truck transportation carried 68% of all freight tonnage in the U.S. However, trucking currently faces significant problems with efficiency and sustainability. Of all miles driven by trucks yearly in the U.S., 25% are driven with empty loads and 36% are driven with underutilized loads. In addition to this economic inefficiency, the industry faces social and environmental challenges. Driver turnover rates are near 100%, and trucking accounts for a significant level of greenhouse gas emissions. One potential …

Semi-Annual Progress Report #8, Missouri University Of Science And Technology. Inspire - University Transportation Center

Semi-Annual Progress Reports

No abstract provided.

Encoding Time-Series Ground Motions As Images For Convolutional Neural Networks-Based Seismic Damage Evaluation, Xinzhe Yuan, Dustin Tanksley, Pu Jiao, Liujun Li, Genda Chen, Donald C. Wunsch

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Traditional methods for seismic damage evaluation require manual extractions of intensity measures (IMs) to properly represent the record-to-record variation of ground motions. Contemporary methods such as convolutional neural networks (CNNs) for time series classification and seismic damage evaluation face a challenge in training due to a huge task of ground-motion image encoding. Presently, no consensus has been reached on the understanding of the most suitable encoding technique and image size (width × height × channel) for CNN-based seismic damage evaluation. In this study, we propose and develop a new image encoding technique based on time-series segmentation (TS) to transform acceleration …

Enercon Station Vacuum Pump Replacement, Clint Hembree, Jared D'Amico, Connor Moore, Paul Jeffrey Fontenot, Sydnee Castello, J.J. Clements

Senior Design Project For Engineers

This details the progress of the ENERCON pump replacement project as completed by the Kennesaw State University interdisciplinary senior design group. This project is a two-semester capstone effort for the engineering program at Southern Polytechnic School of Engineering, overseen by Dr. McFall during Fall 2020 and Dr. Khalid during Spring 2021 semesters. The 2020-2021 KSU Interdisciplinary Senior Design team was tasked with completing an Engineering Change Package (ECP) for existing vacuum pumps at ENERCON Station. The mechanical, electrical, and civil students worked together, performing evaluations on existing plant systems to ensure the plant could support the new vacuum pumps. By …

Abrasion Resistance Of Ultra-High-Performance Concrete For Railway Sleepers, Ariful Hasnat, Nader Ghafoori

Civil and Environmental Engineering and Construction Faculty Research

This study aimed to determine the abrasion resistance of ultra-high-performance concretes (UHPCs) for railway sleepers. Test samples were made with different cementitious material combinations and varying steel fiber contents and shapes, using conventional fine aggregate. A total of 25 UHPCs and two high-strength concretes (HSCs) were selected to evaluate their depth of wear and bulk properties. The results of the coefficient of variation (CV), relative gain in abrasion, and abrasion index of the studied UHPCs were also obtained and discussed. Furthermore, a comparison was made on the resistance to wear of the selected UHPCs with those of the HSCs typically …

Establishment Of Regional Phytoremediation Buffer Systems For Ecological Restoration In The Great Lakes Basin, Usa. Ii. New Clones Show Exceptional Promise, Andrej Pilipović, Ronald S. Zalesny, Elizabeth R. Rogers, Bernard G. Mcmahon, Neil D. Nelson, Joel Gerard Burken, Richard A. Hallett, Chung Ho Lin

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Poplar tree improvement strategies are needed to enhance ecosystem services’ provisioning and achieve phytoremediation objectives. We evaluated the establishment potential of new poplar clones developed at the University of Minnesota Duluth, Natural Resources Research Institute (NRRI) from sixteen phytoremediation buffer systems (phyto buffers) (buffer groups: 2017 × 6; 2018 × 5; 2019 × 5) throughout the Lake Superior and Lake Michigan watersheds. We divided clones into Experimental (testing stage genotypes) and Common (commercial and/or research genotypes) clone groups and compared them with each other and each NRRI clone (NRRI group) at the phyto buffers. We tested for differences in clone …

Modeling Considerations For Built-Up Compression Members In Communication Towers, Ghada M. El-Mahdy P.Eng., Ceng, Amro A. Alawamry

Civil Engineering

It is a well-established fact that built-up compression members exhibit extra flexibility than their equivalent solid members due to the shear action which effects the overall stability. This is usually taken into consideration by using a modified slenderness ratio for buckling modes that involve relative deformation of the interconnectors. Built-up members are often used as space truss members in communication towers. When modeling communication towers in structural analysis programs like SAP2000, the built-up member is usually defined as a single member element with a double section cross section. This does not catch the increase in deflection in the member due …

Evaluation Of Permanent Concrete Barriers To Mash 2016, Samuel Elias Hovde

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The objective of this research project was to develop evaluation criteria for permanent concrete barriers to MASH 2016 TL-3 and TL-4 without crash testing and then to evaluate permanent concrete barrier standards provided by the sponsoring agencies of the Midwest Pooled Fund Program. A literature review was conducted to determine evaluation criteria for stability, shape, strength, and anchorage, and a database of permanent concrete barrier crash tests was compiled. A survey was conducted to collect barrier standards from the members of the Midwest Pooled Fund Program, and barriers were selected and evaluated according to the determined methodology. A total of …

Establishment Of Regional Phytoremediation Buffer Systems For Ecological Restoration In The Great Lakes Basin, Usa. I. Genotype X Environment Interactions, Ronald S. Zalesny, Andrej Pilipović, Elizabeth R. Rogers, Joel Gerard Burken, For Full List Of Authors, See Publisher's Website.

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Poplar remediation systems are ideal for reducing runoff, cleaning groundwater, and delivering ecosystem services to the North American Great Lakes and globally. We used phytorecurrent selection (PRS) to establish sixteen phytoremediation buffer systems (phyto buffers) (buffer groups: 2017 × 6; 2018 × 5; 2019 × 5) throughout the Lake Superior and Lake Michigan watersheds comprised of twelve PRS-selected clones each year. We tested for differences in genotypes, environments, and their interactions for health, height, diameter, and volume from ages one to four years. All trees had optimal health. Mean first-, second-, and third-year volume ranged from 71 ± 26 to …

Artificial Intelligence Driven Infrastructure Management And Maintenance Plan, Julian Jesso

Doctoral Dissertations and Master's Theses

Rapid development in trucking technology and increasing demands in freight transportation has led to longer and heavier vehicles traveling on Florida’s highway system. Vehicles with gross vehicle weight (GVW) over 80,000 pounds, or permit vehicles, have significant effects on infrastructure, thus requiring an approved permit prior to departure. The combination of these increasing loads and harsh environmental conditions that Florida is subject to requires an enhanced infrastructure management program. Additionally, there is a need to eliminate inconsistencies in permit applications and derive a uniform maintenance practice for Florida’s infrastructure. In this research, the focus was to develop an analytical procedure …

Experimental Study Of Hollow-Core Slab Containing Waste Pet Bottles, Mulia Orientilize, Josia Irwan Rastandi, R. M. Dimas Aries C., Marsha Niken P., Krisna Adi S.S., Abimantrana Abimantrana

Makara Journal of Technology

This study investigated the utilization of plastic-waste concrete as an effort to reduce urban waste problems. The waste plastic bottles were utilized to form the hollows of the hollow-core slabs (HCSs). The bottles were made of polyethylene terephthalate (PET). As a part of green research to reuse waste material, shredded PET was also added to the concrete mixture to improve the HCS strength. The cast-in-site HCS could be constructed without any difficulties. Three parameters were investigated: the effects of void content, shredded PET content, and steel-fiber (SF) content on the HCS ultimate bending capacity (Mu). Fifteen specimens were tested under …

Improving The Intellectual And Social Development Of Children With Autism: Design Of A Training Center For Autism, Hasti Jalalian

Makara Journal of Technology

Research on the relationship between the role of architecture and the psychology of children with autism, which indicates that appropriate environments for these children can have a significant effect on their healthcare process, has been recently conducted. However, statistics show that autism spectrum disorders are pervasive, and its extent in Iran has been increasing. Moreover, centers that are specifically designed for children with autism are limited, and paradigms are made without considering the mood of these children. Given the role of architecture in designing a suitable space for these children, an investigation that can identify the specific requirements of these …

Numerical Study Of A Buckling Restrained Brace (Brb) In Steel Structures And Comparison With A Convergent Ordinary Brace (Ocb) Under Static And Dynamic Loading, Fatemeh Habibpour

Makara Journal of Technology

Bulk metallic glass (BMG) has good mechanical strength, high hardness, wear resistance, and corrosion resistance with promising application in various industries. However, for the industrial production of BMG, the main issue is how to overcome limitations of joining with other materials. The present study focuses on solder processing at low operating temperature to avoid exceeding the recrystallization temperature. A feasible joining process for BMG was developed using lead-free solders. The BMG surface is pre-plated with copper, nickel, or titanium as a wetting layer. The reaction temperature is set between the glass transition temperature of BMG and the melting point of …

Analysis Of The Interfacial Reaction Between Bulk Metallic Glass Coated Copper, Nickel, And Titanium With Lead-Free Solders, Andromeda Dwi Laksono, Yee-Wen Yen, Rifqi Aulia Tanjung, Teodoro A. Amatosa, Ruki Harwahyu

Makara Journal of Technology

Bulk metallic glass (BMG) has good mechanical strength, high hardness, wear resistance, and corrosion resistance with promising application in various industries. However, for the industrial production of BMG, the main issue is how to overcome limitations of joining with other materials. The present study focuses on solder processing at low operating temperature to avoid exceeding the recrystallization temperature. A feasible joining process for BMG was developed using lead-free solders. The BMG surface is pre-plated with copper, nickel, or titanium as a wetting layer. The reaction temperature is set between the glass transition temperature of BMG and the melting point of …

Design Of Ac Microgrid Topology With Photovoltaic Uncertainties In A Rural Village, Vannak Vai

Makara Journal of Technology

Energy needs are increasing day by day, especially for developing countries, due to population growth and changing lifestyles. A suitable microgrid topology with renewable energy integration is considered to fulfill the people and society’s needs. This paper focuses on the design of AC microgrid topology for a nonelectrified village with the integration of PV uncertainties in both sitting and sizing. The development of an optimal algorithm based on the conductor use minimization and unbalanced load improvement is proposed. The shortest path is proposed to search for the minimum conductor use. Then, the algorithm for improving the unbalanced load with two …

Mean-Shift Object Tracking Algorithm With Systematic Sampling Technique, Yoanes Bandung, Aris Ardiansyah

Makara Journal of Technology

Mean shift is a fast object tracking algorithm that only considers pixels in an object area, hence its relatively small computational load. This algorithm is suitable for use in real-time conditions in terms of execution time. The use of histograms causes this algorithm to be relatively resistant to rotation and changes in object size. However, its resistance to lighting changes is not optimal. This study aims to improve the performance of the algorithm under lighting changes and reduce its processing time. The proposed technique involves the use of sampling techniques to reduce the number of iterations, optimization of candidate search …

Analysis Of Correlation And Mapping Of Chlorophyll-A Concentrations And Sea Surface Temperatures In Coastal Areas Based On Terra Modis Satellite Image Data, Hendrata Wibisana, Bangun Muljo Sukotjo, Umboro Lasminto

Makara Journal of Technology

Ecosystems in aquatic environments are distinct from ecosystems on land. Changes that occur in ecosystems in aquatic environments affect the lives of biota in these waters, including the fish used as a food source in fishing communities in coastal areas. This study aims to determine the role of remote sensing in mapping and analyzing the relationship between the parameters of sea surface temperature and chlorophyll-a concentrations on the coast. The correlation of sea surface temperature with chlorophyll-a concentrations is modeled via linear regression. An analysis of variance test is performed to establish the suitability of the temperature data for the …

Advanced Concrete Composites For Improved Performance: A Bibliometric Survey, Dhruv Patel, Aryan Tiwari, Nishnat Nikhare, Rohit Shinde, Ashutosh Dubey, Manan Shah, Shalaka Hire, Sayali Sandbhor

Library Philosophy and Practice (e-journal)

Concrete is the core component of any civil engineering construction. Conventional concrete can be modified depending upon the needs and requirements of the construction. Such concrete is called advanced concrete and this report aims to study advanced concrete and its composites. The main objective of this report is to perform a bibliographic survey on the latest research literature available under the domain of advanced concrete composites for improved performance. Timespan considered for the survey is from the year 2015 to 2020. The bibliographic survey consists of literature from online platforms such as the Web of Science (WoS) and Scopus database. …

Analysis Of Tensegrity Structures Using Abaqus, Kayla M. Allen

Honors College Theses

This project involves modeling and analysis of a tensegrity structure using the finite element approach utilizing the Abaqus software package. A tensegrity structure is a special type of assembly consisting of a series of straight solid members, arranged in various geometrical configurations in three-dimensional space and held together by series of cables. The developed finite element models for several tensegrity structures are included in this thesis report to better describe the project.

Human-Robot Collaboration For Effective Bridge Inspection In The Artificial Intelligence Era, Ruwen Qin

INSPIRE Archived Webinars

Advancements in sensor, Artificial Intelligence (AI), and robotic technologies have formed a foundation to enable a transformation from traditional engineering systems to complex adaptive systems. This paradigm shift will bring exciting changes to civil infrastructure systems and their builders, operators and managers. Funded by the INSPIRE University Transportation Center (UTC), Dr. Qin’s group investigated the holism of an AI-robot-inspector system for bridge inspection. Dr. Qin will discuss the need for close collaboration among the constituent components of the AI-robot-inspector system. In the workplace of bridge inspection using drones, the mobile robotic inspection platform rapidly collected big inspection video data that …

Temperature Gradient Effects On Behavior And Design Of Prestressed Concrete Girder Bridges, Ahmed Saad Elsayed Mohamed Elshoura

LSU Doctoral Dissertations

Temperature variation is an inevitable environmental loading type that affects bridges. Considering temperature effects during structural design is deemed essential for short, medium, and long span bridges. Temperature loading can be categorized into three components; uniform temperature, vertical temperature gradient, and transverse temperature gradient. Temperature variation causes additional movements, stresses, and internal forces that should be considered in the design of bridges. In this study, the temperature effects of vertical and transverse temperature gradients are investigated for continuous prestressed concrete bridges.

Thermal restraint moments induced by vertical temperature gradients on prestrssed concrete bridges are investigated by performing three-dimensional (3D) finite …

Development Of Design Tables For The Cold-Formed Steel Cross-Sections In Aisi D100, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

This report with the tables in an Excel file intends to provide the local and distortional buckling strengths for the cross-sections provided in AISI Cold-Formed Steel Design Manual to aid design engineers.

Development Of Cufsm Hole Module And Design Tables For The Cold-Formed Steel Cross-Sections With Typical Web Holes In Aisi D100, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

This report summarizes the effort to develop a simple hole module to perform elastic buckling analysis to obtain the design parameters needed for DSM considering the influence of holes. The hole module requires simple inputs and direct outputs of the elastic buckling information of the local and distortional buckling modes for both gross sections and sections with hole influences.