Civil and Environmental Engineering Commons^™

Prioritization Of Research On Bridge Railings For Use On Timber Deck Bridges And Development Of Two Glulam Bridge Railing Systems, Jared Duren

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

In the past, many timber bridge railings, bridge railings for use on timber deck bridges, and approach guardrail transition systems to accompany these railings, have been developed to meet different impact safety criteria. Through an extensive literature review, the design details of these systems were identified and organized. A survey was then developed and distributed to multiple government agencies and timber industry members to identify their desire for these bridge railing and approach guardrail transition systems to be developed to meet current American Association of State Highway and Transportation Officials (AASHTO) Manual for Assessing Safety Hardware (MASH) impact safety criteria. …

Semi Real-Time Detection Of Subsurface Consolidation Defects During Concrete Curing Stage, Chongsheng Cheng, Zhigang Shen

Department of Construction Engineering and Management: Faculty Publications

Subsurface consolidation defect is a common issue in concrete pavement construction, and the hidden defects often require costly repairs after project delivery. Therefore, being able to identify this type of defect during construction will enable contractor to conduct quick repairs to avoid costly post-construction rework. In this paper a semi real-time detection approach using infrared thermography is introduced. The developed approach utilizes the hydration heat during curing time to identify the subsurface voids based on the regional temperature contrast. Experimental studies were conducted using artificial void-defect in different sizes and depths. The thermographic analysis is employed to locate the void-defects …

An Improved Earned Value Management Method Integrating Quality And Safety, Brian Briggs

LSU Doctoral Dissertations

The construction industry invests significant time and money to improve quality and safety while reducing cost and schedule impacts. The industry has a sincere desire to improve construction project management methods to improve efficiency. Historically, quality and safety underperformances result from undermanaged quality control and safety activities. The cost and schedule impacts associated with poor quality work have always had an impact on construction operations. The unprecedented challenges and uncertainties of COVID-19 highlighted the need to improve the Earned Value Management (EVM) method within construction to reflect these quality and safety activities. The central goal of this dissertation is to …

Structural Vibration Control Of Offshore Wind Turbines, Vahid Jahangiri

LSU Doctoral Dissertations

Offshore wind turbines (OWTs) are becoming more attractive than their onshore counterparts due to advantages such as high wind speed, less visual impact and less noise constraints in the marine area. However, the combined wind, wave and seismic loading and other environmental effects render the offshore wind turbines suffering from excessive vibration which adversely influences the system performance and structural integrity. In this regard, the present dissertation aims to develop effective structural control techniques to mitigate three-dimensional structural vibrations of offshore wind turbines. Analytical models of a fixed-bottom and floating offshore wind turbine are established using Euler-Lagrangian equation wherein the …

Frequency Effect On Peak Pressure Coefficients Using The Narrowband Synthesis Random Flow Generator (Nsrfg) Method, Zayuris Del Carmen Atencio Mojica

Graduate Theses and Dissertations

The collapse of the Tacoma Narrows Bridge in Washington state in 1940 due to high wind forces gave structural engineers notice of the importance of understanding the behavior of wind forces on infrastructure. Wind forces play an important role in the design of buildings and other structures. ASCE 7-16 is the manual used for the design of these buildings and other structures throughout the country. These design criteria have been approved based on research projects involving experimental procedures. For the design of wind loads, ASCE 7-16 uses criteria based on wind tunnel (WT) tests. However, since the development of computing …

Applications Of Masw And Mhvsr Techniques For Infrastructure Evaluation With A Focus On The Effects Of Different Transformation Techniques And Near-Field Effects On Derived Dispersion Data, Salman Rahimi

Graduate Theses and Dissertations

This dissertation is aimed at understanding two aspects of active surface wave methods to improve the accuracy and reliability of this method. These include (1) the performance of four common wavefield transformation methods for the multichannel analysis of surface wave (MASW) data processing and (2) near-field effects. Toward this end, extensive field measurements were conducted considering different factors affecting these two topics. The MASW and microtremor horizontal to vertical spectral ratio (MHVSR) were then employed to examine their efficiency for infrastructure health monitoring.

Regarding the performance of the four common transformation techniques, it was observed that for sites with a …

Data-Driven Methods To Address Truck Parking Shortages For Long-Haul Commercial Truck Drivers, Sharif Mahmud

Graduate Theses and Dissertations

Truck parking is a critical concern for both the trucking industry and the truck drivers. Long-haul commercial truck drivers rely on safe and adequate parking to support interstate commerce, which has become a challenge due to parking shortages. The recent electronic logging device (ELD) mandate, forcing a strict compliance to hours of service (HOS) regulations, are leading to higher demand for parking. A number of federal, regional, and local studies reveal that truck activity will increase and truck parking demand will outpace parking supply in the coming years. Such parking shortages likely disrupt freight flows and pose risks to truck …

Mitigating Calcium Oxychloride Damage In Cementitious Paste And Concrete Utilizing Supplementary Cementitious Materials, Casey Jones

Graduate Theses and Dissertations

It is understood among engineers in the United States (U.S.) that improvement is needed throughout the transportation infrastructure. In the 2021 Infrastructure Report Card produced by the American Society of Civil Engineers, the roadways of this nation merit a D. This leaves room for improvement in order to provide durable pavements throughout this nation. Areas with significant winter weather may have exacerbated effects in decreased roadway longevity due to freezing/thawing cycles and the use of chemical deicers to mitigate gelid roadway conditions. Much research focuses on surface scaling and reinforcement corrosion using these materials; however, joint deterioration, due to chemical …

Response Modification And Seismic Protection Of Yielding Structures Equipped With Inerters And Hysteretic Dampers, Gholamreza Moghimi

Civil and Environmental Engineering Theses and Dissertations

This study investigates the seismic response of structures with sustainable, long-stroke response modification devices. The main thrust of the dissertation is the investigation of the seismic response of yielding structures equipped with supplemental rotational inertia, or inerters. The last chapter of this dissertation investigates the seismic response of multistory yielding steel structures equipped with pressurized sand dampers.

Inerters are mechanical devices with resisting force proportional to the relative acceleration of their end nodes. This class of response modification devices complements the traditional fluid viscous damping devices with resisting force proportional to the relative velocity at their end-nodes. Mass-amplification is the …

Fragility Functions Of Manufactured Houses Under Earthquake Loads, Shuyah Tani Aurore Ouoba

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Manufactured homes are factory-built homes made of wooden structural members, then transported and installed on a given site. Manufactured housing is used in many countries, such as in Australia, and in New Zealand but remain mostly popular in the United States. In 2020, nearly 22 million people were estimated to live in manufactured homes in the United States, with an increase of more than fifty percent in the shipment over the past seven years. However, performance observations from the last decades have shown the vulnerability of manufactured homes to extreme events, like windstorms and earthquakes. Damage assessments and post-event evaluations …

Analysis Of Laminated Beams: A Bibliometric Review, Arati Waghmare, Sanjay Kulkarni

Library Philosophy and Practice (e-journal)

In this paper statistical analysis of literature on “Analysis of Laminated Beams” using Scopus and Web of Science database is done. Reason behind bibliometric study of literature is to understand the extent of research in this particular area. Since Scopus and Web of Science indexing are known as the most reliable sources amongst all the peer reviewed journals, literature from Scopus and Web of Science database only is taken into consideration. Benchmarks used for the analysis are publications in a year, published articles of different authors, citations of authors etc. Considered period is from 2000 to 2020. It is found …

Properties Of Concrete Containing Crushed Limestone As Total Replacement Of Natural Sand And Recycled Engine Oil, Mohammad El Bast M. El Bast, Jamal Khatib, Oussama Baalbaki, Adel Elkordi

BAU Journal - Science and Technology

The rapid growth in the construction industry at the global level has made concrete the most widely used construction material throughout the world. Accordingly, the consumption of natural sand which is one the main raw material constituent of concrete is continuously growing. The demand for river sand is highly increasing due to its scarcity in the market. Manufactured sand produced by crushed rock is being considered as an appropriate alternative to replace river sand in concrete. In recent years, there is a growing interest in the use of crushed sand obtained from limestone quarries in some countries where river sand …

Dynamic Soil-Structure Interaction Analysis: Detecting The Reliability Of Modelling The Piles As A Plate Element For A Multistory Building Resting On Deep Foundation, Zeinab Hussein Zein Z.H.Zein, Lina Jaber L. Jaber, Yehya Temsah Y. Temsah

BAU Journal - Science and Technology

The assessment of seismic responses of buildings in dynamic-soil-pile-structure interaction problems has been one of the main interests among researchers in recent decades. Simulating such problems is usually done by two-dimensional models to overcome the difficulties encountered in 3D models. Commonly, piles were represented by plate elements of infinite length, disregarding the soil flowing between piles. Recently, Plaxis – a finite element software- implemented a new feature known as “the embedded pile row” that allows the definition of piles' out of plane spacing in a 2D model. Many researchers proved its validity in accurately simulating the real 3D pile’s behavior. …

A Novel Probabilistic Framework Of Rc Corroded Structures Under Dynamic Loading, Rawan Mouin Mashmoushy Eng., Wael Slika, Adel Elkordi

BAU Journal - Science and Technology

Steel corrosion in reinforced concrete structures can lead to severe deterioration damage under static and seismic loads. In practice, it is essential to mitigate failure risk by quantifying the extent of damage and simulating the structural response of damaged structures. However, numerical modeling of the dynamic behavior of corroded structure is challenging due to high nonlinearity of the problem and its multidisciplinary nature. In addition, corrosion damage exhibits various sources of uncertainty that impede accurate deterministic modeling of the dynamic response of RC structures. Therefore, this study presents a simplified framework, to simulate the non-linear response of corroded structures under …

Fiber Optic Sensor Based Corrosion Assessment In Reinforced Concrete Members, Genda Chen

INSPIRE Archived Webinars

In this 50-minute lecture, the fundamental concepts of fiber optic sensors for both distributed and point corrosion measurements are reviewed. For the distributed monitoring of a line bridge component such as steel reinforced girders, Brillouin scattering and fiber Bragg gratings (FBG) can be coupled to measure both temperature and radial strain as an indirect indicator of corrosion process. For the point monitoring of steel structures, long period fiber gratings (LPFG) are specially designed for a direct measurement of mass loss or the loss in cross sectional area of the component. In particular, a Fe-C coated LPFG sensor is introduced for …

Case Studies Of Problematic Expansive Soils: Characterization Challenges, Innovative Stabilization Designs, And Novel Monitoring Methods, Anand J. Puppala

Abbett Distinguished Seminar Series

This presentation describes key research works on expansive soils, the methods employed to characterize them, and fallacies in the current characterization of expansive soils. Novel swell characterization models that account for hydro, chemical, and mechanical behaviors of soils are introduced and used in various case studies to improve expansive soil stabilization practices. An innovative design method for successful stabilization of expansive soil is introduced in one case study which incorporated both basic clay mineralogy and unsaturated soil behaviors, as well as performance-based durability studies. Sulfate soil stabilization works on medium-to-high sulfate soils are presented in another case study. The last …

Investigating The Relationship Between The Fatigue Cracking Resistance And Thermal Characteristics Of Asphalt Binders Extracted From Field Mixes Containing Recycled Materials, Eslam Deef-Allah, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt components have a significant contribution to the fatigue cracking resistance of asphalt mixes. Softer asphalt binders, characterized through the Superpave grading system, resist fatigue cracking more than stiffer binders. During the long-term aging, the binders’ components changed from lower- to higher-molecular-weight constituents that increased binders’ stiffnesses. Using recycled materials in the mixes increases the stiffnesses of the binders inside these mixes by altering the binders’ components. The binders were extracted and recovered (E & R) from field mixes containing different percentages of recycled materials [reclaimed asphalt pavement (RAP) and recycled asphalt shingles] and binders’ performance grades. The fatigue resistance …

Engineering Students' Perceptions Of Their Development Of Professional Skills, Caitriona Depaor, Una Beagon, Aimee Byrne, Darren Carthy, Patrick Crean, Louise Lynch, Dervilla Niall

Conference Papers

No abstract provided.

Analysis Of The Implementation Of Fluid Viscous Dampers In A Steel Special Moment Frame, Brad D. Weber

Architectural Engineering

This report examines the effects of adding fluid viscous dampers to a steel special moment frame through a series of analysis methods. Simple analysis procedures are first carried out and described, including a linear static procedure and a linear dynamic procedure. Then further analysis is carried out using a nonlinear dynamic analysis procedure. Multiple parameters are modified throughout the analysis processes to determine the impact on results and the data from all the analysis methods are compiled and used to demonstrate the overall impact of the use of fluid viscous dampers in a steel special moment frame.

Reconceptualizing Mies' Glass House, Araceli Avelar, Armando Castaneda Jr, Madison Lam, Ignatius Malari, Alejo Favero, Augusta Orlauskaite, Ella Gleason

Architectural Engineering

Our team used the glass house studio to explore class stratification, particularly using the glass as a reflection of class dichotomy in our society. The glass and Miesian design approach glorifies the clean cut, picture-perfect utopia only accessible to the wealthy few. But reality proves that there is more to this. As architects and engineers, we should strive to create environments that may uphold our values of equity and diversity and ultimately serve all sectors of society.

The Nolan House, Keiko-Ann K. Sanders, Gilbert C. Munoz, Michael A. Bahr, Titas Kalvalnis

Architectural Engineering

As a precedent, The Green Team analyzed the history of glass architecture, literature, and culture. Based on our research, we found that glass is often depicted as breakable, delicate, and a way to expose or display aspects that would otherwise be hidden. We challenged ourselves to incorporate safety and privacy into our glass house as a way to combat the pre-existing notions of glass in architecture.

Design And Construction Of Modular Concrete Footings And Testing Assembly For Use In Cal Poly's High Bay Laboratory, Thomas Little, Anders Johnson

Architectural Engineering

The purpose of this project was to improve the testing capabilities of the ARCE High Bay lab by designing and fabricating a pair of modular concrete footings along with a reusable testing frame capable of testing full-scale steel moment connections.

Journeyman International: Dwell Being Jonestown, Mississippi, Autumn Wagner

Architectural Engineering

Journeyman International is a non-profit organization that works with countries all over the world to support humanitarian projects by pairing clients with design professionals and volunteers to oversee the design and construction of projects. This specific project partners with Third Lens Ministries and But God Ministries, two organizations that are hoping to empower the community in Jonestown, Mississippi. Dwell Being promotes sustainability and affordable housing in a new housing community in Jonestown that is designed for healthy living and community interaction. Jonestown is a very small 0.4 square acre town that has roots in systemic racism and oppression. A once …

Structural Calculations For Salvation Academy School For Disadvantaged Children, Emma Constance Lambert

Architectural Engineering

Journeyman International is a non-profit organization who partners with students and professionals to provide architectural design, architectural engineering, and construction management work for developing countries in order to combat poverty and ecological destruction on a global scale. The Salvation Academy for Disadvantaged Children is sponsored by Journeyman International and a private client to provide a school campus with a safe and productive environment for children and staff with disabilities. The campus is equipped with classrooms, outdoor gymnasiums, residences for both students and faculty, as well as computer labs and conference areas. The site is located in the Western Area of …

The Utilization Of Industrial Hemp As A Structural Material, Matthew C. Wirick

Construction Management

The need for alternative materials within the construction industry is increasing as more projects are undertaken. Many of the natural resources currently used are being depleted. Various alternatives, such as using recycled concrete as a replacement for aggregate, are being researched and applied to projects with the purpose of reducing construction waste. However, substitutes are needed especially when it comes to structural materials. Industrial hemp is a fast-growing fibrous plant that can be made into a variety of goods and has properties that give it a high enough strength to be fabricated into products that can handle loads such as …

Use Of Biomimicry Design Approach In Constructing Sustainable Resilient Structures (Case Study: Port Of Beirut), Farouk Bader, Marwan Halabi, Hiba Mohsen, Maged Youssef

BAU Journal - Creative Sustainable Development

Resiliency is not the same as sustainability, nor its substitute, but definitely the two concepts complement each other’s. Sustainability is the avoidance of depletion of natural resources to maintain ecological balance whereas resiliency is to recover, adapt and keep going in the face of setbacks. While designing with green approach is important but what will happen to leed points if the building becomes uninhabitable due to disasters, that’s where resiliency comes into play. The 2019 statistics showed that natural disasters accounted for 133 billion dollars losses and manmade ones accounted for other 7 billion in addition to 11,755 people worldwide …

Computational Design Of Nonlinear Stress-Strain Of Isotropic Materials, Askhad M.Polatov, Akhmat M. Ikramov, Daniyarbek Razmukhamedov

Chemical Technology, Control and Management

The article deals with the problems of numerical modeling of nonlinear physical processes of the stress-strain state of structural elements. An elastoplastic medium of a homogeneous solid material is investigated. The results of computational experiments on the study of the process of physically nonlinear deformation of isotropic elements of three-dimensional structures with a system of one- and double-periodic spherical cavities under uniaxial compression are presented. The influence and mutual influence of stress concentrators in the form of spherical cavities, vertically located two cavities and a horizontally located system of two cavities on the deformation of the structure are investigated. Numerical …

Context-Aware Sensing And Fusion For Structural Health Monitoring And Night Time Traffic Surveillance, Xinxiang Zhang

Electrical Engineering Theses and Dissertations

Rapid developments in computer vision technologies have been transforming many traditional fields in engineering and science in the last few decades, especially in terms of diagnosing problems from visual images. Leveraging computer vision technologies to inspect, monitor, assess infrastructure conditions, and analyze traffic dynamics, has gained significant increase in both effectiveness and efficiency, compared to the cost of traditional instrumentation arrays to monitor, and manually inspect civil infrastructures and traffic conditions. Therefore, to construct the next-generation intelligent civil and transportation infrastructures, this dissertation develops a comprehensive computer-vision based sensing and fusion framework for structural health monitoring and intelligent transportation systems. …

Reliability Of Sfrp-Strengthened Rc Bridge Columns Subjected To Blast Loads, Ahmad Alsendi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

The reliability of reinforced concrete bridge columns strengthened with externally bonded, steel-fiber reinforced polymer fabric subjected to blast loads was investigated. Columns were modeled with a nonlinear finite element approach that considers material damage, fracture, and separation. Different concrete strengths, longitudinal reinforcement ratios, and gravity and blast load levels were considered, while uncertainties in material strength and stiffness parameters, as well as load characteristics, were incorporated in the probabilistic analysis. It was found that the use of SFRP can allow significant increases in blast load while maintaining the same level of column reliability.

Comparison Of The Resistance Of Belitic Calcium Sulfoaluminate Cement And Portland Cement To Sulfate Attack And Sulfuric Acid, Rilye Dillard

Graduate Theses and Dissertations

Microbially induced corrosion (MIC) is a fairly common concrete deterioration mechanism with many negative effects. MIC is a complex chemical and biological process that occurs in sewage systems and is nearly impossible to replicate in a laboratory setting. For this study, sulfate and sulfuric acid attack on concrete were studied to mimic two stages of the MIC process. The ASTM C1012, Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution and a modified ASTM C1012 accelerated method were used to compare the sulfate resistance of belitic calcium sulfoaluminate (BCSA) cement, portland cement (PC), and PC-fly …