Polymer Science Commons^™

Microscopic Insights On Shear Rheology Of Polyampholyte Ionomers Via Molecular Simulations, Kyle Vonscio

Williams Honors College, Honors Research Projects

Ionomers are polymers that contain a small fraction of charged groups. The ionic attraction of charged groups allows ionomers to act similarly to crosslinked polymers. Depending on the strength of electrostatic interactions and structure of the ionomers, different dynamics and rheological responses can be observed. With moderate attraction between ions, these noncovalent crosslinks can be broken when heated, allowing ionomers to flow and show the strength of a crosslinked network at low temperatures. Nonequilibrium molecular dynamics (NEMD) simulations will be performed under shear in the xy-plane and the macroscopic rheology and conformation of the polyampholyte ionomer will be determined. The …

Effects Of Hofmeister Ions On Lower Critical Solution Temperatures Of Poly(N-Isopropylacrylamide) And Poly(Vinyl Methyl Ether), Joseph Joaquin

Williams Honors College, Honors Research Projects

The goal of this study is to compare how four different Hofmeister anions (Cl-, SCN-, F-, and I-) affect the Lower Critical Solution temperature (LCST) on two thermo-responsive polymers: poly(N-isopropylacrylamide) (pNIPAAM) and poly(vinyl methyl ether) (PVME). pNIPAAm is commonly used in the environmental applications such as monitoring, oil-water separations, or antifouling materials, and in medical industry from drug delivery to tissue engineering. When pNIPAAM or PVME reaches a temperature above their LCST, they become hydrophobic, and the polymer chains coiled, leading to their aqueous solutions turn opaque. PVME exhibits a similar LCST as that of pNIPAAM, so it can be …

Interfacial Phenomena Of Plastics: From Surface Modifications To Environmental Impacts, Kennedy Guillot

LSU Doctoral Dissertations

Plastic is a ubiquitous part of everyday life since its introduction in the previous century. Global production continues to exponentially increase, establishing plastics as one of the most dominant materials in modern manufacturing. Within the scope of academia, plastic is essential due to its low cost and sterility, particularly for minimizing contamination. Beyond the laboratory, plastic use spans numerous industries, and its use and disposal has since raised many environmental concerns. Once valued for its durability, plastics now pollute the environment in landfills and natural ecosystems. In recent decades, the consequences of this pollution have been investigated, yet the full …

Multifunctional Pvdf Ionogels With Magnetic Nanoparticles For Electroactive And Magnetic Actuation, Alfredo Carrillo Valverde

Chemical Engineering Undergraduate Honors Theses

The fast development of compact and multifunctional electronics has driven interest in smart materials capable of responding to multiple stimuli. Ionogels, polymers that have been swollen with ionic liquids (IL), offer several favorable electrochemical and thermal properties due to their intrinsic ion conductivity, wide electrochemical window, non-flammability, and high thermal stability. However, their poor mechanical properties (e.g., modulus and strength) limit their use in applications. In this work, multifunctional PVDF ionogel composites were made by blending magnetically responsive iron oxide nanoparticles (Fe₃O₄ MNPs) into the polymer matrix. The influence of MNP concentration (9-21 wt%) on composition, ionic …

Incorporating Recycled And Repurposed Plastic Into 100% Reclaimed Asphalt Pavement, Basant Bhatt

Graduate Theses and Dissertations (2019 - present)

The increasing awareness of sustainability in the asphalt industry has driven the use of recycled materials like reclaimed asphalt pavement (RAP) and waste plastic. This study examines the incorporation of recycled polypropylene (rPP), recycled high-density polyethylene (rHDPE), and recycled low-density polyethylene (rLDPE) at 0.3%, 0.6%, and 0.8% dosages into 100% RAP, along with the warm mix asphalt additive Evotherm® P25. Laboratory tests were conducted to evaluate the mechanical and durability performance of the modified asphalt mixtures while rutting and fatigue life were evaluated using mechanistic-empirical (ME) analysis in PerRoad software. Both plastic type and dosage had a statistically significant impact …

Modern Ir-Spectroscopic Methods For The Analysis Of Hydroxybenzene-Methanal Resin Obtained On The Basis Of 2,5-Furandion, Sherali Anvarovich Umarov, Ravshan Israilovich Ismailov Ismailov

Technical science and innovation

The chemical changes occurring during the synthesis of hydroxybenzene-methanal resins obtained on the basis of 2,5-furandion under various ratios and temperature conditions were investigated using the IR spectroscopic method. Analysis of the compositional changes in the resin during the production of the thermoreactive resin revealed that the content of hydroxyl groups (~3300–3500 cm⁻¹) decreased, while the aldehyde groups (~1700–1750 cm⁻¹) increased; moreover, the presence of ether groups (~1050–1150 cm⁻¹) indicated that the process was successful. The synthesis of resins based on thermoreactive hydroxybenzene-methanal resins was carried out at high temperatures (70°C, 80°C, 95°C). During the identification of the functional groups …

A Comparative Study On Natural Vs. Synthesized Polymers Combined With Silica Nanoparticles To Maximize Secondary Oil Recovery, Attia Attia, Mohamed Sadek Hamedi Al, Waleed Abd-Alsabour Ali Eng., Zeyad Tamer Elshony Eng.

Petroleum Engineering and Gas

Polymer flooding is a well-established technique for enhancing oil recovery from reservoirs. In this study, we investigate the performance of two different polymers, Xanthan Gum, and HPAM for secondary oil recovery in the sand pack. The effects of polymer concentration and high salinity on oil recovery are studied. The polymers are characterized using various measurements and tests, including viscosity, shear rate, and interfacial tension. The sand pack flooding experiments are conducted under various conditions, including varying polymer slugs, and nanosilica (silicon dioxide SiO2) concentration. The results are analyzed to determine the optimal conditions for polymer flooding for enhanced oil recovery. …

Prediction Of Glass Transition Temperature Of Polymers Using Structure-Based Models, Nicholas Wolfe

Williams Honors College, Honors Research Projects

The focus for this study is prediction of glass transition temperatures of polymers using machine learning models. The preprocessing of the data included the generation of descriptors, the scaling of the data, the principal component analysis for dimensionality reduction, and the clustering of the data. Three methods of property predictions were utilized including Linear Regression, Random Forest, and a Feedforward Neural Network. The dataset consisted of over 7000 polymers each with their respective glass transition temperatures. This study found that the Random Forest model returned the best results followed by the Feedforward Neural Network then the Linear Regression model. Each …

Study Of Reactive Distillation Equipment For Eterification Process, Abbos Elmanov, Abdulaziz Bakhtiyorov, Adham Norkobilov, Olimjon Maksudov, Zarif Oripov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this work is to study the chemical technological processes for eterification processes, and the reactive distillation unit, which carries out the reaction and separation process in one device, was chosen as the object of research. А reаctive distillаtion system is exаmined to produce for the production of Ethyl Acetate (EtAc) viа eterificаtion of acetic acid (HAc) with ethаnol. Optimizаtion methods using sensitivity analysis аre аlso conducted. Cаlculаtion of vаpor liquid equilibrium of the mixture system is done using UNIFАC model. Heat integration from the distillate stream of the column to the acid feed stream and from bottom …

Dough Rheology And Its Influence On Sheeting Behavior, Najat Albarakati

Graduate Theses, Dissertations, and Problem Reports (ETD)

Dough is the starting material for a large number of baked products, including cookies, crackers and bread. In commercial food processing operations, it is desired to obtain the same product and with the same dimensions in a reproducible manner in order to minimize waste. In the case of dough, the flour used, and the nature and amount of ingredients employed depend on the specific product and the market served. This research was aimed at relating cracker dough rheology to sheeting behavior between two counter-rotating rollers. The sheet that is formed is used to punch out the crackers that are then …

Sustained Release Systems For Endometrial Cancer, Claire E. Rowlands

Theses and Dissertations--Chemical and Materials Engineering

Endometrial cancer (EC) is the sixth most common cancer in women worldwide and is the most common cancer of female reproductive organs. From 2007-2016 there has been a global rise in incidence of EC of 1.3 %. Typically, EC is treated with surgery, but at later stages surgery is less effective requiring chemotherapy and/or radiation therapy. These treatment options are less effective than surgery and there are very few FDA approved chemotherapies for EC. The minuscule number of effective treatment options as well as an increase in incidence shows the need for creating improved treatments for EC. There has been …

Robust Gasification Trial Results For A Variety Of Difficult-To-Recycle Packaging-Related Materials, Bruce A. Welt

Journal of Applied Packaging Research

Currently, recycling requires nearly absolute sorting of materials to accommodate the limited capabilities of existing recycling infrastructure. Whether a material is “recyclable” depends more on the method of recycling than the material itself. Our dependence upon sorting has limited success of recycling and has stifled our ability to achieve circular economy sustainability with plastic packaging materials. Our dependence upon sorting is rooted in our material-specific recycling processes. However, newer robust recycling processes are commercially available that reduce or eliminate the need to sort waste, and can convert mixed waste into primary feedstock chemicals, such as methanol for subsequent manufacture of …

Utilizing Computer-Aided Molecular Design With Azido-Ester Plasticizers, Justin Ebert

Williams Honors College, Honors Research Projects

The goal of this project was to utilize Computer-Aided Molecular Design (CAMD) using the Signature molecular descriptor to inversely design optimized azido-ester plasticizers. Azido-ester plasticizers are used to modify the mechanical properties of propellant and explosive formulations. With the assistance of quantitative structure-property relationships, QSPRs, and two types of constraint equations, these new, novel plasticizers have the potential to possess optimal physical and chemical properties. Properties investigated in this work were decomposition temperature, heat of formation, glass transition temperature, and molecular weight. These properties were chosen for their importance when formulating propellants or explosives. After the filters were applied to …

Mechanical And Adhesive Properties Of Supramolecular, Mussel-Inspired Hydrogels, Daniel Darby

Theses and Dissertations--Chemical and Materials Engineering

The exceptional mechanical and adhesive properties of mussel byssal threads come from supramolecular interactions of ligands found in the proteins comprising them. Ligands can form hydrophobic interactions, π-π stacking interactions, and hydrogen bonds, but the strongest supramolecular interaction they demonstrate is metal-ligand coordination. Specifically, Histidine (His-) and nitrodopamine (nDOPA) ligands coordinate to metals in a bidentate fashion and take on tris-, bis-, and mono- modalities (3, 2, or 1 ligand per ion, respectively). The distribution of these modalities is controlled by equilibrium thermodynamics. These same ligands can be used as crosslinks in supramolecular hydrogel networks. Supramolecular hydrogel networks are dissipative, …

Mechanisms Of Emulsion Destabilization: An Investigation Of Surfactant, Stabilizer, And Detergent Based Formulations Using Diffusing Wave Spectroscopy, Jordan N. Nowaczyk

Theses and Dissertations

Conventional approaches for studying emulsions, such as microscopy and macroscopic phase tracking, present challenges when it comes to establishing detailed mechanistic descriptions of the impact of emulsifier and stabilizer additives. Additionally, while a combination of sizing methods and macroscopic phase tracking can provide insights into droplet size changes and concentration, the use of multiple measurements can be cumbersome and error-prone. It is the focus of this work, to present a new method for studying water in oil (W/O) emulsions that involves using diffusing wave spectroscopy (DWS) to examine the impact of three different surface stabilizing additives at varying concentrations. By …

Effect Of Temperature, Catalyst Concentration And Time, On Polylactic Acid Production From Sisal Boles Juice By Ring Open Polymerization, Neema O. Msuya

Tanzania Journal of Engineering and Technology (TJET)

Polylactic acid (PLA) is a biodegradable and renewable alternative to non-biodegradable petrochemical-based polymers that is environmentally friendly and green. PLA can be made from a variety of agricultural wastes that contain sugars, such as sisal boles. This study aimed at analysing the possibility of producing PLA from lactic acid (LA) produced from sisal bole. A 2n factorial design was used to analyse the effects of temperature (160-180ºC), time (1-2 hrs) and tin octoate catalyst concentration (0.025-0.05%) on the PLA yield during polymerization. Minitab Version 20.2.0 was used to design the experiment and analyse the effects on the responses through ANOVA. …

Application Of Sla 3d Printing For Polymers, Taylor Wilson

Williams Honors College, Honors Research Projects

Stereolithography is a type of 3D printing that allows liquid photopolymer resin to be cured into layers that make up a 3D object. Creation of such resins for these purposes can require a significant amount of time to test and develop, and commercial resins also require some amount of testing for printer settings before use. This paper reviews how stereolithography works, the materials used, and experimentation done to compare the resin properties to the determined curing times. Using several commercially available resins, varying base exposure and layer exposure times were used to determine the lowest possible curing time that gave …

Retention And Stability Of Polystyrene Sulfonic Acid And Polyethylene Glycol Anti- Fouling Films With 3-Aminopropyltriethoxysilane Coupling Agent, Brian Cameron

Williams Honors College, Honors Research Projects

Fouling is a process where particles, proteins, or microorganisms will accumulate onto a material [2]. This can lead to biofilms in medical implants, which can trap and create drug resistant bacteria [5]. Due to this, the study and creation of anti-fouling polymeric films that is stable in aqueous environments is essential. The goal of this study is to utilize APTES to retain the already studied PSS-PEG anti-fouling films. The films that are created is a thermally crosslinked network of the polystyrene sulfonic acid (PSS) and polyethylene glycol (PEG) with differing mass fractions (75- 25 and 55-45 PSS-PEG). To retain the …

Development Of Co2 Capture Method Via Polyurethane-Amine Sorbent In Vsa, Samantha Starkey, David S. Rinehart

Williams Honors College, Honors Research Projects

With increases in extreme weather and global temperatures, research is delving into CO₂ capture to help reverse climate change. This project explored utilizing vacuum swing adsorption (VSA) for CO₂ capture and release. VSA uses a sorbent, in this case amine sorbents, to capture CO­­₂ from air and subsequently removes it via vacuum. Polyurethane (PU) foam was investigated as a potential matrix for amine sorbents to increase exposure of CO₂ capturing amines to air by utilizing its porous structure. PU mixing studies were conducted to determine the feasibility of mixing PU foam with amines and coating foams …

Assessing The Impact Of Block-Selective Homopolymers On The Diffusion Of Payload Through Polymeric Organogels, Ian Coates

Honors Theses

Styrenic polymer gels have received recent attention for their application in transdermal patches due to their unique properties. Previous research in the pharmaceutical industry has identified that polymeric gels, specifically styrenic gels, have the potential to encompass multiple functions of the transdermal delivery patch including controlling mechanical and delivery properties. To tailor styrenic gels either the gel nanostructure or the drug complex can be controlled. Specifically, this thesis investigated the effect of gel nanostructure in an attempt to control the gel diffusivity and mechanical properties. To control gel nanostructure a phase selective styrene homopolymer was used at varying concentrations. It …

Design Of Pigments For Use In “Cool” Coatings, Tyler Laughorn

Williams Honors College, Honors Research Projects

This project was focused on the development and testing of several novel pigments that exhibit high NIR-reflectance and therefore show potential for use in “cool” coatings. A “cool” coating will reflect more solar radiation than other standard coatings, and so a coated structure would require less energy to keep cool. Four sets of pigments were synthesized: Co_1-xMg_xCr₂O₄ (teal), Co_0.25Mg_0.75Cr_2-yAl_yO₄ (blue), Ti_1-x-yNi_xSb_yO₂ (yellow), and Cr_2-xFe_xO₃ (black). NIR and TSR values were then measured …

Filtration Apparatus Design For Oil-Water Separation Using Membranes And Sponges, Alec Jerger

Williams Honors College, Honors Research Projects

It can be difficult to separate water and oil emulsions through traditional filtration. Therefore, investigations of filtering using thermo-responsive (TR) polymers, in this case poly(vinyl methyl ether) (PVME), was conducted. It’s hypothesized that below its lower critical solution temperature (LCST), PVME has an affinity for water while oil substances do not. Above the LCST the opposite will be true. To verify this hypothesis, iterations of filtration designs were created to provide optimum control over the parameters to measure flow. The final optimized experimental apparatus was a Chromaflex glass column which was air tight and controlled all parameters besides fluid flow. …

A Foundational Approach To Extrusion And Compounding, David Frankart

Williams Honors College, Honors Research Projects

With a history of nearly 200 years, polymer processing and compounding is constantly changing to fit the material science needs of the era. Exposure of undergraduate students to the technology and practices used in industry today in a lab setting would create new opportunities for experiential learning and growth. The objective was to set up a 0.75”, 25 L/D Thermo Haake single screw extruder for lab use and run trials of material in a single screw extruder to set up a basis for experiments. Trials were run of co-polyester resin through a single screw extruder with carbon fiber additives varying …

Elucidating The Properties And Mechanism For Cellulose Dissolution In Tetrabutylphosphonium-Based Ionic Liquids Using High Concentrations Of Water, Brad Crawford

Graduate Theses, Dissertations, and Problem Reports (ETD)

The structural, transport, and thermodynamic properties related to cellulose dissolution by tetrabutylphosphonium chloride (TBPCl) and tetrabutylphosphonium hydroxide (TBPH)-water mixtures have been calculated via molecular dynamics simulations. For both ionic liquid (IL)-water solutions, water veins begin to form between the TBPs interlocking arms at 80 mol % water, opening a pathway for the diffusion of the anions, cations, and water. The water veins allow for a diffusion regime shift in the concentration region from 80 to 92.5 mol % water, providing a higher probability of solvent interaction with the dissolving cellulose strand. The hydrogen bonding was compared between small and large …

Formulation And Validation Of Nanoparticle Controlled Delivery For Chemotherapeutic Drug Products, Shani L. Levit

Theses and Dissertations

Taxol, a formulation of paclitaxel (PTX), is one of the most widely used anticancer drugs, particularly for treating recurring ovarian carcinomas following surgery. Clinically, PTX is used in combination with other drugs such as lapatinib (LAP) to increase treatment efficacy. Delivering drug combinations with nanoparticles has the potential to improve chemotherapy outcomes. In this study, we use Flash NanoPrecipitation, a rapid, scalable process to encapsulate weakly hydrophobic drugs (logP in vitro. Encapsulating either PTX or LAP into nanoparticles increases drug potency. When PTX and LAP are co-loaded in the same nanoparticle, they have a synergistic effect that is greater than …

Fabrication Of Polyvinylidene Fluoride Hollow Fiber Membranes For Membrane Distillation, Abdullah Al Balushi

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Desalination technologies can help humanity tap into the most abundant source of water on earth, seawater; however, desalination is an energy-demanding process. Most of the desalination plants worldwide use conventional energy resources; therefore, desalination leaves a large carbon footprint. Solar energy is an available source of energy that can be harvested and integrated into desalination systems.

Membrane distillation (MD) is an emerging purification technology that many offers many advantages over traditional desalination systems. For starters, it can utilize low-grade thermal energy to drive the separation, therefore, it can be suitably integrated into the solar-thermal energy scheme. Additionally, MD can be …

Using Green Emitting Ph-Responsive Nanogels To Report Environmental Changes Within Hydrogels: A Nanoprobe For Versatile Sensing, Mingning Zhu, Dongdong Lu, Shanglin Wu, Qing Lian, Wenkai Wang, L. Andrew Lyon, Weiguang Wang, Paulo Bártolo, Brian R. Saunders

Engineering Faculty Articles and Research

Remotely reporting the local environment within hydrogels using inexpensive laboratory techniques has excellent potential to improve our understanding of the nanometer-scale changes that cause macroscopic swelling or deswelling. Whilst photoluminescence (PL) spectroscopy is a popular method for such studies this approach commonly requires bespoke and time-consuming synthesis to attach fluorophores which may leave toxic residues. A promising and more versatile alternative is to use a pre-formed nanogel probe that contains a donor/acceptor pair and then “dope” that into the gel during gel assembly. Here, we introduce green-emitting methacrylic acid-based nanogel probe particles and use them to report the local environment …

Nanogels And Microgels: From Model Colloids To Applications, Recent Developments, And Future Trends, Mattias Karg, Andrij Pich, Thomas Hellweg, Todd Hoare, L. Andrew Lyon, J. J. Crassous, Daisuke Suzuki, Rustam A. Gumerov, Stefanie Schneider, Igor I. Potemkin, Walter Richtering

Engineering Faculty Articles and Research

Nanogels and microgels are soft, deformable, and penetrable objects with an internal gel-like structure that is swollen by the dispersing solvent. Their softness and the potential to respond to external stimuli like temperature, pressure, pH, ionic strength, and different analytes make them interesting as soft model systems in fundamental research as well as for a broad range of applications, in particular in the field of biological applications. Recent tremendous developments in their synthesis open access to systems with complex architectures and compositions allowing for tailoring microgels with specific properties. At the same time state-of-the-art theoretical and simulation approaches offer deeper …

A Proposed Process And Economic Analysis For A Manufacturing Facility For Nylon 6,6, Perry Doles

Chemical Engineering Undergraduate Honors Theses

The global nylon market is a multi-billion-dollar industry that has been thriving in recent years due to advances in the process technology and its flexibility as a material. Nylon 6,6 is a versatile material with uses in many industries because of its ability manipulated into many forms. It is commonly used in applications that require heat resistance, chemical resistance, and high mechanical strength. It is commonly used in luggage, car parts, carpets, and many other plastic products that require the properties that nylon 6,6 exhibits. The versatility and demand for nylon 6,6 make it an attractive process for many potential …

Modeling The Effect Thickener Structure Has On The Oil Release Of Grease, Dana Cressman

Williams Honors College, Honors Research Projects

Our hypothesis was that the thickener type and micelle concentration of grease affected its viscoelastic properties. Measurements were made using a TA AR G2 rheometer and calculations were made using TA rheometer analysis software to characterize the viscoelastic response of grease under oscillatory shear and frequency tests. The oscillatory frequency tests determined the critical micelle concentration. The oscillatory stress tests were taken at temperatures from 5 to 65 degrees Celsius to create a master curve based on time temperature superposition of the measurements. The crossover points of G’ and G” on the oscillatory stress tests demonstrated where the grease transitions …