Biochemical and Biomolecular Engineering Commons^™

Development Of Light Actuated Chemical Delivery Platform On A 2-D Array Of Micropore Structure, Hojjat Rostami Azmand, Hojjat Rostami Azmand

Dissertations and Theses

Localized chemical delivery plays an essential role in the fundamental information transfers within biological systems. Thus, the ability to mimic the natural chemical signal modulation would provide significant contributions to understand the functional signaling pathway of biological cells and develop new prosthetic devices for neurological disorders. In this paper, we demonstrate a light-controlled hydrogel platform that can be used for localized chemical delivery in a high spatial resolution. By utilizing the photothermal behavior of graphene-hydrogel composites confined within micron-sized fluidic channels, patterned light illumination creates the parallel and independent actuation of chemical release in a group of fluidic ports. The …

Interactions Of Lignin Dimers With Engineered Surfaces And Model Cell Membranes For Design Of Lignin-Based Materials, Mahsa Moradipour

Theses and Dissertations--Chemical and Materials Engineering

Capitalizing on byproducts of industrial and agricultural economies is among the utmost goals of sustainability. Of particular interest for commercial upgrading is lignin, a phenolic biopolymer found in the cell walls of plants which is the second most abundant biopolymer on Earth after cellulose. Due to its heterogeneous structure, deconstructing lignin to selected small molecules for use as chemicals or advanced materials has been elusive. This work capitalizes on a “bottom up” approach to the synthesis of lignin oligomers of known bond chemistry to better understand their interfacial interactions.

The potential pharmacological mechanism of lignin deconstruction components and their toxicological …

Understanding Absorption, Supersaturation, And Drug Activity In Solution: Working Towards Developing A More Biorelevant Media, Freddy Arce

Theses and Dissertations--Pharmacy

With the looming dominance of poorly water-soluble chemical entities within the pharmaceutical pipeline, the pharmaceutical industry has leaned on the use of supersaturating drug delivery systems (SDDSs) to achieve efficacious concentrations within the gastrointestinal fluids. SDDSs aim to achieve concentrations in solutions greater than the solubility of the lowest energy crystalline form. However, the generation of supersaturated solutions of active pharmaceutical ingredients (APIs) creates a strong crystallization potential, which is undesirable.

In product development, supersaturating products often fail in Phase I and Phase II clinical trials due to poor oral bioavailability and a lack of in vivo efficacy. Pre-clinical testing …

Biological Conversion Of Carbon Dioxide To Value-Added Chemicals, Owen James Mcgrath

Graduate Theses, Dissertations, and Problem Reports

As Carbon Dioxide (CO₂) levels in the atmosphere continue to rise due to human intervention, there is increased urgency to take actions to mitigate the potential ramifications. Many countries have instituted a CO₂ tax and have provided funding to finding potential solutions to our growing CO₂ problem. Further investigating CO₂ capture, sequestration, and utilization is key to combating rising CO₂ levels and methods being investigated have increased substantially in recent years. Converting CO₂ into fuels and value-added chemicals provides a unique opportunity to create materials of value from a substance that is being …

Comparison Of The Effects Of Hofmeister Ions On Transition Temperature Of Two Thermoresponsive Polymers, Ashley Knight

Williams Honors College, Honors Research Projects

It has been hypothesized that poly(vinylmethylether) (PVME) could be used to replace poly(N-isopropylacrylamide) (pNIPAAM) in various thermoresponsive applications based on literature searches and previous lab experiments. PVME is cheaper and easier to process, and would make pNIPAAM applications more cost effective. In order to verify this, experimental data was gathered on the effects of four anions from the Hofmeister series (SO₄₂-, Cl-, I-, and SCN-) on the lower critical solution temperature (LCST) of pNIPAAM and compared to previous data collected on PVME. Commercial pNIPAAM from Sigma Aldrich and Polysciences were used. The reported LCST range for pNIPAAM is …

Investigation Of Surface Charge Using Faraday Bucket Measurements: Analysis On Electrospun Polyvinylidene Fluoride Fiber Mats, Ryan Kantenwein

Williams Honors College, Honors Research Projects

Piezoelectric polymer materials such as polyvinylidene fluoride exhibit beneficial properties for use in personal protective equipment (PPE) against viral contaminants and other foreign microparticles. The electrospinning process of this material allows for surface charge to develop over a controlled surface area. Kynar 761 at 10 wt% demonstrates increased surface charge after withstanding a flow of aerated NaCl particles from a TSI 8130 instrument. Utilizing voltage measurements from a Faraday bucket, 18 wt% Kynar 761 and MG-15 exhibit surface charge when undergoing an electrospinning process; however, Kynar MG-15 displays lower charge values than that of Kynar 761. Several critical factors such …

Quantifying Mafenide Release From 3d Printed Phenylalanine-Coumarin Copolyester Scaffolds, Jacob Seeh

Williams Honors College, Honors Research Projects

This project addressed burn wound healing through controlled release of the antibacterial drug mafenide encapsulated by a copolyster into 3D printed scaffolds. Scaffolds were printed at 25^oC and 0.77-1 bar in a cross-hatch pattern with uniform thickness, distance between parallel layers, and diameter then photo-crosslinked. The number of scaffolds available for testing was limited by the amount of polymer that could be synthesized. A high-performance liquid chromatography method was developed specifically for this experiment and used to determine daily release of mafenide from the scaffold into a 2-mL phosphate buffer solution. During the first 24 hours a large …

Kinetics Study Of The Hydrodeoxygenation Of Xylitol Over A ReoX-Pd/Ceo2 Catalyst, Blake Macqueen, Michael Royko, Bradie S. Crandall, Andreas Heyden, Yomaira J. Pagán-Torres, Jochen A. Lauterbach

Faculty Publications

In this study, we elucidate the reaction kinetics for the simultaneous hydrodeoxygenation of xylitol to 1,2-dideoxypentitol and 1,2,5-pentanetriol over a ReOx-Pd/CeO2 (2.0 weight% Re, 0.30 weight% Pd) catalyst. The reaction was determined to be a zero-order reaction with respect to xylitol. The activation energy was elucidated through an Arrhenius relationship as well as non-Arrhenius kinetics. The Arrhenius relationship was investigated at 150–170◦ C and a constant H2 pressure of 10 bar resulting in an activation energy of 48.7 ± 10.5 kJ/mol. The investigation of non-Arrhenius kinetics was conducted at 120–170◦ C and a sub-Arrhenius relation was elucidated with activation energy …

Kinetics Study Of The Hydrodeoxygenation Of Xylitol Over A ReoX-Pd/Ceo2 Catalyst, Blake Macqueen, Michael Royko, Bradie S. Crandall, Andreas Heyden, Yomaira J. Pagán-Torres, Jochen A. Lauterbach

Faculty Publications

In this study, we elucidate the reaction kinetics for the simultaneous hydrodeoxygenation of xylitol to 1,2-dideoxypentitol and 1,2,5-pentanetriol over a ReOx-Pd/CeO2 (2.0 weight% Re, 0.30 weight% Pd) catalyst. The reaction was determined to be a zero-order reaction with respect to xylitol. The activation energy was elucidated through an Arrhenius relationship as well as non-Arrhenius kinetics. The Arrhenius relationship was investigated at 150–170◦ C and a constant H2 pressure of 10 bar resulting in an activation energy of 48.7 ± 10.5 kJ/mol. The investigation of non-Arrhenius kinetics was conducted at 120–170◦ C and a sub-Arrhenius relation was elucidated with activation energy …

The Extraction Of Waxes And Lipids From Sorghum Using Green And Renewable Solvents Followed By Conversion To Biofuels Using Gamma-Valerolactone Pretreatment, Marissa Gallmeyer

Dissertations, Master's Theses and Master's Reports

Plant matter contains waxes and lipids that can be extracted and used or sold as a value-added product prior to conversion of the remaining plant material to biofuels. Wax and lipid extraction of plant materials is currently performed using volatile, non-renewable hydrocarbons, primarily hexane, which is produced from fossil fuels and can pose a health and safety hazard. The purpose of this study is to compare the amount and characteristics of waxes extracted by hexane with those extracted using organic solvents that are less toxic and can be produced from renewable sources.

Sorghum samples were extracted separately with hexane, 2-methyltetrahydrofuran …

Oxygen Harvesting From Carbon Dioxide: Simultaneous Epoxidation And Co Formation, Han Xu, Muhammad Shaban, Sui Wang, Anas Alkayal, Dingxin Liu, Michael G. Kong, Felix Plasser, Benjamin R. Buckley, Felipe Iza

Bioelectrics Publications

Due to increasing concentrations in the atmosphere, carbon dioxide has, in recent times, been targeted for utilisation (Carbon Capture Utilisation and Storage, CCUS). In particular, the production of CO from CO₂ has been an area of intense interest, particularly since the CO can be utilized in Fischer–Tropsch synthesis. Herein we report that CO₂ can also be used as a source of atomic oxygen that is efficiently harvested and used as a waste-free terminal oxidant for the oxidation of alkenes to epoxides. Simultaneously, the process yields CO. Utilization of the atomic oxygen does not only generate a valuable product, …