Chemical Engineering Commons^™

Cybersecurity, Image-Based Control, And Process Design And Instrumentation Selection, Dominic Messina, Akkarakaran Francis Leonard, Ryan Hightower, Kip Nieman, Renee O'Neill, Paloma Beacham, Katie Tyrrell, Muhammad Adnan, Helen E. Durand

Chemical Engineering and Materials Science Faculty Research Publications

Within an Industry 4.0 framework, a variety of new considerations are of increasing importance, such as securing processes against cyberattacks on the control systems or utilizing advances in image processing for image-based control. These new technologies impact relationships between process design and control. In this work, we discuss some of these potential relationships, beginning with a discussion of side channel attacks and what they suggest about ways of evaluating plant design and instrumentation selection, along with controller and security schemes, particularly as more data is collected and there is a move toward an industrial Internet of Things. Next, we highlight …

The Reversal Of Carbonate Wettability Via Alumina Nanofluids: Implications For Hydrogen Geological Storage, Amer Alanazi, Mujahid Ali, Muhammad Ali, Alireza Keshavarz, Stefan Iglauer, Hussein Hoteit

Research outputs 2022 to 2026

Underground hydrogen storage (UHS) has been recognized as a key enabler of the industrial-scale implementation of a hydrogen-based economy. However, the efficiency and storage capacity of hydrogen (H2) in carbonate aquifers can be influenced by the presence of organic acids. Nevertheless, the existing literature contains few investigations of H2/calcite/brine wettability and the influence of organic acids on H2 storability in carbonate reservoirs. Therefore, the present study examines the influence of stearic acid on the dynamic H2/brine wettability of calcite substrates (as a proxy of carbonate formation) under various geological conditions (0.1–20 MPa at 323 K), equilibrated in 10 wt% NaCl …

Catalytic Upcycling Of Waste Plastics By Induction Heating, Bernard Whajah

LSU Doctoral Dissertations

The development of plastics over the past half century has led to rapid technological advances; however, the long-term negative environmental impacts of these materials compel new depolymerization and upcycling strategies. Plastics are indispensable due to their unique physical and chemical properties and affordability, leading to a significant increase in production rates. However, their recycling rates lag far behind their production rates. Polyolefins like LDPE and HDPE, which are common plastics, decompose very slowly in the environment. Converting these plastics into useful products often requires high-temperature pyrolysis, resulting in undesired distributions of products.

To address this challenge, this study focuses on …

Designing Behavior-Aware Ai Systems To Influence Human Decision-Making, Guanghui Yu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Artificial intelligence (AI) demonstrates superiority over humans in many applications, such as image processing, speech recognition, and decision-making. AI systems are more efficient and accurate in information processing and computation, making them invaluable in assisting human decision-making across domains like healthcare, finance, and academia. Despite these strengths, real-world applications often involve complex, context-specific judgments and a deep understanding of human values, which current AI systems might not fully grasp. In domains requiring creativity and critical thinking, AI systems heavily rely on existing human knowledge. Humans, however, possess unique strengths such as intuition, which aids decision-making in uncertain or novel situations, …

Extraction, Preparation, And Characterization Of Alginate Biopolymer Films From Natural Seaweed, David Ly

Master's Theses

This study evaluates the use of naturally harvested seaweed from the Monterey Bay to produce a biodegradable film for food packaging applications. Two different film-forming methods were evaluated: solution casting and compression molding. The solution casting method using an alginate biopolymer produced the most consistent results. The seaweed biopolymer was extracted from the seaweed biomass using a modified method, resulting in a yield of 11-25 %. The highest yield was observed when using the lowest biomass concentration of 10 wt. %. The extracted alginate was then cast into films at different levels of glycerol plasticization (15-35 wt.%). The addition of …

Green Synthesis Of Carbonized Chitosan-Fe3o4-Sio2 Nano-Composite For Adsorption Of Heavy Metals From Aqueous Solutions, Dalia A. Ali Eng, Rinad Galal Ali Eng.

Chemical Engineering

Water pollution with heavy metals owing to industrial and agricultural activities have become a critical dilemma to humans, plants as well as the marine environment. Therefore, it is of great importance that the carcinogenic heavy metals present in wastewater to be eliminated through designing treatment technologies that can remove multiple pollutants. A novel green magnetic nano-composite called (Carbonized Chitosan-Fe3O4-SiO2) was synthesized using Co-precipitation method to adsorb a mixture of heavy metal ions included; cobalt (Co2+), nickel (Ni2+) and copper (Cu2+) ions from aqueous solutions. The novelty of this study was the synthesis of a new

nano-composite which was green with …

Environmental Impacts Potential Of Natural Gas Production Through Life Cycle Assessment, Akmal Al Afghani, Mochamad Adhiraga Pratama, Astryd Viandila Dahlan

Journal of Materials Exploration and Findings

Life cycle assessment (LCA) is a methodology used to evaluate potential environmental impacts in various industry sectors, including the oil and gas industry to quantify the environmental impacts and determine the processes that have significant impacts along their production cycle. This environmental impact study adheres to ISO 14040:2016 and 14044:2017 standards, using the ReCiPe methodology within a gate-to-gate scope to analyze potential environmental impacts of 1 MMSCFD natural gas production. The impact categories analyzed in this study are Global Warming Potential (GWP), Particulate Matter Formation (PM), Ozone Formation (OF), and Terrestrial Acidification (TA). The results of this study identified several …

Inspection Planning Of Subsea Pipeline Using Risk-Based Inspection, Ni Luh Triska Adelia, Badrul Munir, Johny Wahyuadi Soedarsono

Journal of Materials Exploration and Findings

Pipelines are an important tool in oil and gas exploration. Pipeline is a transmission and liquid collection lines, including their accessories, which transport fluids from one plant to another. In transmission and collection process, there is a possibility of failure which can have minor to major impact on personnel injury, the environment and interrupt the business process. To maintain safety and to prevent accidents, the source and cause of failure needs to be calculated. Risk-based inspection (RBI) is a method that can be used to calculate the risk and determine the inspection planning both schedule and method, by combining the …

Acousto-Dielectric Tweezers Enable Independent Manipulation Of Multiple Particles, Liang Shen, Zhenhua Tian, Kaichun Yang, Joseph Rich, Jinxin Zhang, Jianping Xia, Wesley Collyer, Brandon Lu, Nanjing Hao, Zhichao Pei, Chuyi Chen, Tony Jun Huang

Faculty Publications

Acoustic tweezers have gained substantial interest in biology, engineering, and materials science for their label-free, precise, contactless, and programmable manipulation of small objects. However, acoustic tweezers cannot independently manipulate multiple microparticles simultaneously. This study introduces acousto-dielectric tweezers capable of independently manipulating multiple microparticles and precise control over intercellular distances and cyclical cell pairing and separation for detailed cell-cell interaction analysis. Our acousto-dielectric tweezers leverage the competition between acoustic radiation forces, generated by standing surface acoustic waves (SAWs), and dielectrophoretic (DEP) forces, induced by gradient electric fields. Modulating these fields allows for the precise positioning of individual microparticles at points where …

Synthesis Of Uv-Blocking Titanium Oxide Films Via Remote-Type Atmospheric Pressure Plasma Cvd, Hayate Endo, Akira Shirakura, Shinya Kudo, Tetsuya Suzuki

Journal of Applied Packaging Research

This study aims to enhance UV resistance in plastics, focusing on polycarbonate (PC) and polypropylene (PP) commonly used in reuseable packaging. Traditional organic UV absorbers face safety and cost challenges, prompting our investigation into alternative methods. We utilized chemical vapor deposition (CVD), specifically Atmospheric Pressure Plasma Enhanced CVD (AP-PE-CVD), to apply titanium oxide (TiO₂) thin films. This innovative approach, using a remote-type AP-PE-CVD technique, enables coating on complex surfaces and 3D objects. The produced TiO2 films, containing over 20% titanium, showed a UV transmittance of 14.5% at 310 nm and effective UV blocking starting at 372 nm. The …

Unrefined And Milled Ilmenite As A Cost-Effective Photocatalyst For Uv-Assisted Destruction And Mineralization Of Pfas, Eustace Y. Fernando, Zhiming Zhang

Henry M. Rowan College of Engineering Departmental Research

Per- and polyfluoroalkyl substances (PFAS) are fluorinated and refractory pollutants that are ubiquitous in industrial wastewater. Photocatalytic destruction of such pollutants with catalysts such as TiO2 and ZnO is an attractive avenue for removal of PFAS, but refined forms of such photocatalysts are expensive. This study, for the first time, utilized milled unrefined raw mineral ilmenite, coupled to UV-C irradiation to achieve mineralization of the two model PFAS compounds perfluorooctanoic acid (PFOA) and perfluoro octane sulfonic acid (PFOS). Results obtained using a bench-scale photocatalytic reactor system demonstrated rapid removal kinetics of PFAS compounds (>90% removal in less than 10 …

Natural Fiber Reinforced Composites For Sustainable Additive Manufacturing., Athira Nair Surendran

Electronic Theses and Dissertations

Carbon fiber is widely known for its exceptional strength, making it a sought-after material in composite manufacturing, especially with thermosets and thermoplastics. Its major applications span aerospace, wind turbines, sports equipment, automotive interior and exterior parts, robotics and medical equipment. Recently, carbon fiber filament manufacturing has gained attention due to the availability of desktop 3D printers and the versatility and customizability that comes with the realm of 3D printing. Commercial carbon fiber production, primarily from polyacrylonitrile (PAN), is energy-intensive and derived from crude oil, contributing to significant environmental impacts and poor recyclability. Alternatively, lignocellulosic natural fibers present a possible sustainable …

Meteorological Data Mining And Synthesis For Supplementing On-Site Data For Regulatory Compliance, Ben Sonpon, Shoaib Usman, Joseph Smith, Sarah Kovaleski, Jason Wibbenmeyer

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

Many regulatory requirements add significant delay in the licensing of new nuclear power stations. One area of particular interest is the environmental impact of potential atmospheric release. the purpose of this research is to demonstrate effectiveness of meteorological data mining and synthesis from offsite locations to reduce need for onsite data, hence allowing rapid licensing. the automated procedures tested for data mining and extraction of meteorological data from multiple offsite sources and the data analytic tool developed for data fusion are presented here. Three important meteorological parameters from regulatory compliance are considered for this analysis: wind velocity, wind direction, and …

Recent Progress In Microencapsulation Technology And Its Applications In Petroleum Industry, Jingyi Zhu, Jiayu He, Jie Zhou, Zhaozhong Yang, Xiaogang Li, Ying Li, Zhenjiang You

Research outputs 2022 to 2026

Oilfield chemicals play a pivotal role in optimizing the development of oil and gas resources. Emerging technologies for the controlled release of these chemicals have captured considerable interest among petroleum engineers. Microencapsulation, a method widely employed for controlled release in various industries such as biotechnology, pharmaceuticals, and agriculture, is gaining traction in the realm of oil and gas exploitation. This paper provides a comprehensive review of encapsulation technologies, including solvent evaporation, coacervation, and polymerization methods. Special emphasis is placed on recent advancements in the applications of microcapsules within the oil and gas sector. Given the profound impact of release behavior …

Frameworks For The Techno-Economic Assessment Of Membrane-Based Bioprocessing Platforms, Juan Jose Romero Conde

All Dissertations

This dissertation describes developing and implementing computational frameworks for simulating and optimizing purification processes in the biopharmaceutical industry. The framework performs techno-economic analyses to establish value propositions for new process alternatives, especially membrane technologies. Initially, the focus is developing a framework capable of simulating monoclonal antibody (mAb) capture using membrane and resin media in multi-column chromatography (MCC) platforms for continuous manufacturing. Subsequently, the impact of capture MCC is compared against other intensification strategies in established mAb manufacturing facilities. Finally, the framework application expands to simulate the purification of adeno-associated virus (AAV) vectors for gene therapy.

Chapter 2 details the framework …

Developing A Comprehensive Genome-Scale Metabolic Model For The Arabidopsis Thaliana Root System, Lohani Esterhuizen

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Arabidopsis thaliana (Arabidopsis) is the most well-established model plant to date. Being the first plant to have its genome mapped, studies on Arabidopsis have provided insurmountable insights into the physiological and biochemical nature of plants. Methods that allow us to computationally study the metabolism of organisms include the use of genome-scale metabolic models (GEMs). Despite its popularity, no GEM currently maps the metabolic activity in the root system of Arabidopsis, which is the first organ to face and respond to stress conditions in the soil. This work aims to develop and implement a comprehensive GEM of the Arabidopsis root system …

Meteorological Data Mining And Synthesis For Supplementing On-Site Data For Regulatory Compliance, Ben Sonpon, Shoaib Usman, Joseph Smith, Sarah Kovaleski, Jason Wibbenmeyer

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

Many regulatory requirements add significant delay in the licensing of new nuclear power stations. One area of particular interest is the environmental impact of potential atmospheric release. The purpose of this research is to demonstrate effectiveness of meteorological data mining and synthesis from offsite locations to reduce need for onsite data, hence allowing rapid licensing. The automated procedures tested for data mining and extraction of meteorological data from multiple offsite sources and the data analytic tool developed for data fusion are presented here. Three important meteorological parameters from regulatory compliance are considered for this analysis: wind velocity, wind direction, and …

Enhancing Thermal Stability Of Perovskite Solar Cells Through Thermal Transition And Thin Film Crystallization Engineering Of Polymeric Hole Transport Layers, Sanggyun Kim, Sina Sabury, Carlo A. R. Perini, Tareq Hossain, Augustine O. Yusuf, Xiangyu Xiao, Ruipeng Li, Kenneth R. Graham, John R. Reynolds, Juan-Pablo Correa-Baena

Chemical and Materials Engineering Faculty Publications

Organic hole transport layers (HTLs) have been known to be susceptible to thermal stress, leading to poor long- term stability in perovskite solar cells (PSCs). We synthesized three 2,5-dialkoxy-substituted, 1,4-bis(2-thienyl)phenylene (TPT)-based conjugated polymers (CPs) linked with thiophene-based (thiophene (T) and thienothiophene (TT)) comonomers and evaluated them as HTLs in n-i-p PSCs. TPT-T (MB/C6), which has branched 2- methylbutyl and linear hexyl (MB/C6) side chains, emerged as a promising HTL candidate, enabling power conversion efficiencies (PCEs) greater than 15%. In addition, PSCs with this HTL showed an improvement in long-term stability at elevated temperatures of 65 °C when compared to those …

Resolving The Size And Charge Of Small Particles: A Predictive Model Of Nanopore Mechanics, Samuel Bearden, Tigran M. Abramyan, Dmitry Gil, Jessica Johnson, Anton Murashko, Sergei Makaev, David Mai, Alexander Baranchikov, Vladimir Ivanov, Vladimir Reukov, Guigen Zhang

Chemical and Materials Engineering Faculty Publications

The movement of small particles and molecules through nanopore membranes is widespread and has far-reaching implications. Consequently, the development of mathematical models is essential for understanding these processes on a micro level, leading to deeper insights. In this endeavor, we suggested a model based on a set of empirical equations to predict the transport of substances through a solid-state nanopore and the associated signals generated during their translocation. This model establishes analytical relationships between the ionic current and electrical double-layer potential observed during analyte translocation and their size, charge, and mobility in an electrolyte solution. This framework allows for rapid …

Fabrication And Characterization Of Lignin–Pva Hydrogels With Tunable Network Structures, Keturah Bethel

All Dissertations

The ability to directly tune the crosslinked network structure of hydrogels is crucial for their functional applications in various fields, such as water filtration, protein separation, and tissue engineering. By controlling the crosslink density of the hydrogel, one can directly alter the mesh size – i.e., the end-to-end distance between crosslink junctions – and, subsequently, directly alter the hydrogel performance. This work discusses the fabrication and characterization of soft composites containing the biopolymer, lignin, are discussed. Precisely, physically-crosslinked composite lignin–Poly(vinyl alcohol) (PVA) hydrogels were fabricated via the freeze-thaw (F/T) pathway, whereby solutions containing specified amounts of PVA and lignin were …

Determination Of Binary Co2/H2 Adsorption Isotherms And Kinetics Over Porous Organic Cage Cc3 Via Zero-Length Column Technique, Jimmy D.L. Moreno, Kyle Newport, Ali A. Rownaghi, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

Understanding the dynamics of mixed-gas adsorption is essential for industrial-scale adsorptive separations. Also, obtaining binary adsorption isotherms is essential to gain a better understanding of adsorbate-adsorbent interactions in multicomponent gas mixtures. Porous organic cages (POCs) are highly porous, crystalline materials, with a small average pore window that make them promising candidates for separation applications. In this work, we utilized zero-length column (ZLC) technique to not only determine the kinetics of CO₂/H₂ separation over CC3 but also obtain the binary adsorption isotherms. The ultra crystalline diffusivities of 1.49 x 10^–4 and 8.31 x 10^–5 cm^{2 …}

Examination And Improvement Of The Taguchi-Based Nanofluids Impact On Co2 Absorption Using Al2o3 Nanoparticles, Safa Waleed Shakir, Saif Saleh Hussein, Shaymaa Hasan Khazaal, Hyder Akram Al-Naseri, Ahmed Mohammed Ahmed, Rana Najah Hachim, Muthanna Hikmat Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this study, a batch absorption reactor was used to evaluate the nanofluid of a binary aqueous solution of monoethanolamine and 2-amino-2-methyl-1-propanol (MEA/AMP) with nanoparticles of aluminium oxide (Al₂O₃) as a solvent used to remove carbon dioxide (CO₂) from simulated flue gas. Furthermore, the application of the Taguchi experiment design method determined the optimal conditions for the absorption process. This research focuses on the CO₂ absorption process and the optimal conditions related to nanoparticle addition. The main effects of using nanofluid were investigated. The concentration of nanoparticles, nanoparticle size, and stirrer speeds were …

Tectonic Implications Of Seismic Anisotropy Layering Beneath The Southern Tibetan Plateau Revealed By Integrated Shear Wave Splitting And Receiver Function Analyses, Cong Shen, Stephen S. Gao, Fansheng Kong, Kelly H. Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

To investigate continental dynamics underneath the south-central Tibetan plateau, which composes the Himalayan, Lhasa, and Qiangtang blocks, we have conducted comprehensive examinations of seismic azimuthal anisotropy in the crust using receiver functions (RFs) and crustal and mantle anisotropy using teleseismic shear wave splitting (SWS) analysis. In the Qiangtang block, the observed predominantly E-W fast orientations from RF and SWS analyses with similar magnitude are interpreted as resulting from eastward crustal flow with minor contributions from the mantle. In the Lhasa block, the crustal anisotropy is approximately N-S oriented, which is parallel to the strike of rift basins and southward crustal …

Fundamental Study Of Nonlinear Electrophoresis, Joseph Armakan Bentor

All Dissertations

Classical electrophoretic theory describes the linear response of particles suspended in Newtonian fluids under weak electric fields. When the electric field exceeds this weak limit, a nonlinear response arises due to non-uniform surface conduction over the curved particles. This nonlinear behavior introduces dependencies on fluid and particle properties not considered in the classical theory, offering potential advantages for microfluidic particle manipulation. While this phenomenon has been extensively studied theoretically and numerically in Newtonian fluids, experimental investigations have been relatively limited.

Fluid rheology can significantly alter particle dynamics under applied electric fields. Rheological properties like shear-thinning and elasticity which are not …

Analysis Of The Relationship Between Flow Patterns In The Post-Stenotic Region Of Model Arteries And Stenosis Severity., Michael Laroche

Electronic Theses and Dissertations

In this study, contour fields of mean age and turbulence kinetic energy (TKE) in the post-stenotic region of model arteries were analyzed to explore their correlation with FFR. While both high and low FFR cases exhibited similarities with an inner low-age region and an outer high-age region, low FFR cases displayed asymmetry in their low-age regions due to eccentric stenosis. Moreover, gradients of age across the artery diameter were more pronounced for low FFR cases. Additionally, low FFR cases demonstrated significantly higher TKE in the post-stenotic blood jet stream compared to high FFR cases that are reflected in low-age boundary …

Investigating The Detection And Transport Of Low Molecular Weight Species To Better Understand Their Impact On Disease Pathology And Treatment, Haley Michelle Duncan

Graduate Theses and Dissertations

Due to the drastic differences in the projects involved, this dissertation will be split into two sections: Alzheimer’s disease and chronic kidney disease. Each chapter will contain an introduction, materials and methods section, results and discussion, conclusions, and works cited section. The Alzheimer’s disease chapter will also have a supplemental figures section containing the polyacrylamide gels that were silver stained and quantified via ImageJ. The presence of elevated levels of amyloid beta oligomeric species in the brain has been related to the pathology of Alzheimer’s disease. As these oligomeric species are transient in nature, their kinetics pose a challenge to …

Fatigue Performance Of 3d-Printed Poly-Lactic-Acid Bone Scaffolds With Triply Periodic Minimal Surface And Voronoi Pore Structures, Hamed Bakhtiari, Alireza Nouri, Majid Tolouei-Rad

Research outputs 2022 to 2026

Bone scaffolds serve a crucial role in tissue engineering, particularly in facilitating bone regeneration where natural repair is insufficient. Despite advancements in the fabrication of polymeric bone scaffolds, the challenge remains to optimize their mechanical resilience. Specifically, research on the fatigue behaviour of polymeric bone scaffolds is scarce. This study investigates the influence of pore architecture on the mechanical performance of poly-lactic-acid (PLA) scaffolds under quasi-static and cyclic compression. PLA scaffolds with a 60% porosity were fabricated using extrusion-based 3D printing in various designs: Gyroid, Lidinoid, Fischer–Koch, IWP, and Voronoi. Results demonstrated that Gyroid scaffolds had the highest compressive strength …

Design And Development Of Uio-67-Coated Pim-1-Based Composites And Demonstration Of Their Detoxification Performance, Sukanta K. Mondal, Peter O. Aina, Ali A. Rownaghi, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

Polymer-supported MOF composites have emerged as versatile candidates for various separation and catalytic applications. In this study, we demonstrate design and development of UiO-67-coated Ce(OH)₄@PIM-1 composites via dip-coating, drop-casting, solid-phase coating, and supramolecular assembly, and assess their preparation-structure-performance relations. The catalytic performance of the composites was investigated through hydrolysis of dimethyl 4-nitrophenyl phosphate (DMNP), as a nerve agent simulant. The findings revealed that while dip-coating method was unable to achieve a thick and uniform coverage of the MOF layer on the Ce(OH)₄@PIM-1, the supramolecular assembly gave rise to 16 wt.% MOF loading and the composite prepared …

Constant-Ph Molecular Dynamics At Inorganic Interfaces: Adding A New Dimension To Simulations Of Interfacial Phenomena., Ted Kalbfleisch

Electronic Theses and Dissertations

This dissertation explores the application of novel molecular dynamics simulation methods to better understand complex systems, with a particular focus on silica materials and protein interactions. Silica materials, known for their versatile surface and solution chemistries, play critical roles in catalysis, chromatography, and wastewater treatment. Despite their widespread use, the molecular-level interactions between silica surfaces and their environments remain poorly understood. To address this knowledge gap, we employed λ-dynamics enabled constant pH molecular dynamics to dynamically model protonation and deprotonation events on silica surfaces. Traditional experimental techniques such as x-ray crystallography, NMR, and cryo-EM are inadequate for probing structures in …

Carboxen Micropreconcentrator Performance For Analyzing Btex In Air., Raymond Daniel Spargo

Electronic Theses and Dissertations

Volatile Organic Compounds (VOCs) are a class of toxic chemicals in environmental air associated with several serious health risks. Some of the most common and concerning VOCs are Benzene, Toluene, Ethyl Benzene, and Xylene (BTEX). To maintain healthy air quality in these environments, researchers pursue instruments and processes to quickly and accurately predict sub-ppb concentrations of BTEX in indoor and outdoor air. By employing a micropreconcentrator (μPC) to combine Solid-Phase Micro-Extraction (SPME) with Gas Chromatography Mass Spectrometry (GC-MS) analysis, trace BTEX content in air samples can be captured, extracted and analyzed. In this thesis, a dual-compartment μPC with Carboxen 1000 …