Chemical Engineering Commons^™

Use Of Polyacrylonitrile As Anodic Artificial Solid Electrolyte Interphase For Aqueous-Based Zinc-Ion Batteries, Nutchaya Muangplod

Chulalongkorn University Theses and Dissertations (Chula ETD)

Rechargeable aqueous zinc-ion batteries (ZIBs) have attracted attention for energy storage systems because of their high specific capacity, low cost, and safety. However, practical application of the zinc anode in mild acidic electrolytes is limited by several issues such as dendrite formation, corrosion, hydrogen evolution reaction, passivation and relatively low cycling performance. Coating the zinc anode with graphite (GP) (GP@Zn) can partially solve these issues and improves the cycling performance of ZIB. However, after long-term charge/discharge cycles, zinc tends to migrate and redeposit over the surface of GP owing to the electronic conductivity of GP particles. Thus, after long-term cycling, …

Understanding Absorption, Supersaturation, And Drug Activity In Solution: Working Towards Developing A More Biorelevant Media, Freddy Arce

Theses and Dissertations--Pharmacy

With the looming dominance of poorly water-soluble chemical entities within the pharmaceutical pipeline, the pharmaceutical industry has leaned on the use of supersaturating drug delivery systems (SDDSs) to achieve efficacious concentrations within the gastrointestinal fluids. SDDSs aim to achieve concentrations in solutions greater than the solubility of the lowest energy crystalline form. However, the generation of supersaturated solutions of active pharmaceutical ingredients (APIs) creates a strong crystallization potential, which is undesirable.

In product development, supersaturating products often fail in Phase I and Phase II clinical trials due to poor oral bioavailability and a lack of in vivo efficacy. Pre-clinical testing …

Extraction Of Micro- And Nano-Plastic Particles From Water Using Hydrophobic Natural Deep Eutectic Solvents, Jameson R. Hunter

Theses and Dissertations--Biosystems and Agricultural Engineering

The production of plastic and the amount of waste plastic that enters the environment increases every year. Synthetic polymers will gradually break down into particles on the micro- and nano-scale. The micro- and nano-plastics pose a significant ecological harm by transporting toxic chemicals and causing inflammation and cellular damage when ingested. Two common plastics are polyethylene terephthalate (PET) and Polystyrene (PS), and a newer bioplastic polylactic acid (PLA) that has become a popular alternative. Deep eutectic solvents are a recently discovered solvent composed of a hydrogen bond donor and hydrogen bond acceptor and have been proposed as a cheaper alternative …

Carbon Capture And Utilization, Sriram Valluri

Dissertations, Master's Theses and Master's Reports

As the world moves towards clean energy initiative, carbon capture and utilization technologies are key to achieving net zero emissions. CO2 capture with amines has many disadvantages and cannot be applied to commercial power plants. The current manuscript will address this issue as well as a solution that involves the use of low-cost alkali absorbent CO₂ capture solutions, combined with an electrochemical regeneration method that uses the least amount of energy available for capture and regeneration. This research will also further address the issue of how to deal with the captured CO2. Several viable storage and utilization methods have …

Effects Of Microporous Structure On The Enzymatic Conversion Of Biomass Using A Multiscale Model, Saketh Merugu

Dissertations, Master's Theses and Master's Reports

The generation of biofuels from lignocellulosic biomass involves innovative process technology that is being investigated worldwide. Enzymatic hydrolysis is a major step in the contemporary process of the generation of biofuels. Guided by pore size distribution measured using NMR cryoporometry, we developed pore-enzyme diffusion and adsorption models at the particle level coupled with a kinetic model for cellulose, cellobiose, and glucose production at flask level. By simulating these models in MATLAB, COMSOL, and Polymath software packages, we investigate the effects of various biomass particle-related parameters (particle dimensions, porosity, enzyme accessibility) on the characteristic time of enzyme diffusion and adsorption and …

Establishing Independent Tunability Of The Mechanical And Transport Properties Of Polymer Gels, Lucas Rankin

Master’s Theses

Polymer gels can be used in the fabrication of materials for filtering liquid and gaseous media, solid-state electrolytes, and transdermal medical patches. This diverse range of applications primarily relies on the transport and mechanical properties of polymer gels. Both sets of properties have shown excellent tunability, but typically in a coupled fashion. Establishing the independent tunability of the transport and mechanical properties of polymer gels (using simple, cost-effective methods) is paramount if polymer gels are to be used to their full potential. Specifically, block copolymer gels self-assemble into organized nanoscale networks within the gel solvent, which allows for facile control …

The Characterization Of Purified Citrate-Coated Cerium Oxide Nanoparticles Prepared Via Hydrothermal Synthesis, Matthew L. Hancock, Robert A. Yokel, Matthew J. Beck, Julie L. Calahan, Travis W. Jarrells, Eric J. Munson, George A. Olaniyan, Eric A. Grulke

Chemical and Materials Engineering Faculty Publications

Hypothesis

Cerium oxide nanoparticles were synthesized using a hydrothermal approach with citric acid as a stabilizing agent. Citric acid adsorption onto the nanoceria particle surface can cease particle formation and create a stable dispersion for an extended shelf life. The product was dialyzed immediately following the synthesis to remove unreacted cerium that could contribute to biological effects. Nanoparticle characterization results are expected to help identify the surface citrate bonding structure.

Experiments

Many characterization techniques were utilized to determine size, morphology, surface properties, and citrate complexation on the nanoceria particle surface. These included transmission electron microscopy, electron energy loss spectroscopy, dynamic …

Heavy Metals Found In Juul's Electronic Cigarettes, Joshua F. Gesselberty

Honors Theses

Electronic cigarettes better known as e-cigarettes have been consistently rising in popularity with new products entering the market daily. E-cigarettes function by vaporizing a liquid composed of propylene glycol, glycerin, benzoic acid, nicotine, and flavor additives with the use of a metallic heating element. This vapor produced is then inhaled by the user. The composition of this liquid is critical to discovering the possible health effects.

This study investigates the presence and concentrations of heavy metals in the e-liquid before and after vaping. An ICP-MS was used because of its ability to scan several metals rapidly and its high sensitivity. …

Helicopter Shaft Heating Parameters For Polyamide-11 Coating, Selim Kevran Ph.D, Uğur Ati̇ci̇

International Journal of Aviation, Aeronautics, and Aerospace

In this study, the heating parameters required for polyamide-11 (P11) coating of the helicopter shaft were investigated. The torsion value created by the force applied to the middle of the helicopter's shaft is measured. Heating before coating affects the torsion value of the shaft. A new heating mechanism has been designed to cover the shaft surface without changing the torsion value of the shaft. Thus, the coating surface is left inside the furnace and the torsion measurement area outside of the furnace. Taguchi method was used to determine heating parameters such as furnace type, initial temperature and heating time. The …

Detection Of 2,4,6-Trinitrotoluene Using A Colorimetric Gold Nanoparticle Air Cassette Filter, Andrea I. Ferrer Vega

Master of Science in Forensic Science Directed Research Projects

Trinitrotoluene (TNT) is an explosive commonly used during military and terrorist activities. Current methods to identify this compound require sampling, transport and analysis at a forensic lab using analytical instrumentation. However, on-site detection is needed to assist efforts to prevent detonation. Gold nanoparticles have been used as sensors throughout the years due to their versatility and surface enhanced Raman scattering properties in the presence of an analyte and low limits of detection. By taking advantage of the Meisenheimer complex that TNT forms in the presence of amines, it is possible to determine its presence at picogram levels. Subsequently, adhering amine …

The Critical Role Of Dynamic Surface Tension Of Surfactants On The Impact Dynamics Of Water Droplets, Amir Esmaeili, Reza Mohammadi

Graduate Research Posters

Due to their time-dependent surface tension, the addition of surface-active agents or surfactants to water for specific applications has made controlling the impact dynamics of these droplets a complex phenomenon. This work investigates the influence of the molecular weight, concentration, and ionic nature of the surfactants as well as the substrate surface characteristics on the impact dynamics of surfactant-laden droplets using a high-speed camera at 10000 frames per second. Sodium dodecyl sulfate, hexadecyltrimethylammonium bromide, and n-decanoyl-n-methylglucamine were used as anionic, cationic, and nonionic surfactants, respectively. We used hydrophilic glass slides, hydrophobic polytetrafluoroethylene, and superhydrophobic alkyl ketene dimer (AKD) as substrates. …

Biomass-Derived Electrode Materials And Sustainable Processes For Supercapacitors, Katelyn M. Shell

Theses and Dissertations

Biomass is one of the most abundant natural resources and has been used as a source of energy for thousands of years. Biomass as a precursor for energy storage materials is still relatively novel and faces several obstacles before becoming commonly used in today’s electrical devices. Currently, energy storage devices, such as batteries, capacitors, and supercapacitors, utilize petroleum-derived graphitic carbons for anodes, generating a need for more sustainable materials. Biomass, as a carbon-rich source for electrode materials, presents a viable and economically feasible alternative due to the prevalent lignocellulosic compounds: lignin, cellulose, and hemicellulose. Preliminary studies on the solid residues …

Enhancing Emulsion Liquid Membrane System (Elm) Stability And Performance For The Extraction Of Phenol From Wastewater Using Various Nanoparticles, Faris H. Al-Ani, Qusay F. Alsalhy, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Emulation liquid membrane (ELM) technology has recently garnered attention as an efficient alternative for separating pollutants, but it faces the problem of instability during the application, as well as emulsion breaking. With this in mind MgO, Al₂O₃, and three magnetic Fe₂O₃ nanoparticles (of different sizes) were utilized to fabricate a new Pickering ELM system (PELM). The extraction efficiency of phenol from aqueous solution by PELM was studied with different NPs types and with different phenol concentrations (1,000; 500; 100; and 50 ppm). It was found that the type of NPs and concentration of …

Assessing Solvent Viscosity Impact On The Physical Characteristics Of Polymeric Organogels, Cameron Hong

Honors Theses

Traditionally, studies of polymeric organogels focus on the impact of polymer factors (e.g., molecular weight and polymer concentration) on the gels’ mechanical and transport properties. Alternatively, this study seeks to assess the impact of altering solvent viscosity, while holding polymer factors constant. The gels in this study were composed of different viscosity mineral oils, styrene-ethylene-butylene-styrene (SEBS) triblock copolymer as a gelator, and oleic acid (OA) as a model drug. Samples were formulated to have 6.5, 11.2, and 15.7 wt% SEBS copolymer for each mineral oil, varying in viscosity from ≈30 mPa*s to ≈500 mPa*s. Uniaxial mechanical testing was performed to …

Assessing The Impact Of Block-Selective Homopolymers On The Diffusion Of Payload Through Polymeric Organogels, Ian Coates

Honors Theses

Styrenic polymer gels have received recent attention for their application in transdermal patches due to their unique properties. Previous research in the pharmaceutical industry has identified that polymeric gels, specifically styrenic gels, have the potential to encompass multiple functions of the transdermal delivery patch including controlling mechanical and delivery properties. To tailor styrenic gels either the gel nanostructure or the drug complex can be controlled. Specifically, this thesis investigated the effect of gel nanostructure in an attempt to control the gel diffusivity and mechanical properties. To control gel nanostructure a phase selective styrene homopolymer was used at varying concentrations. It …

Determination Of Hydrogel Degradation By Passive Mechanical Testing, Avery Rosh-Gorsky

Honors Theses

This paper details a new technique to measure the mechanical properties of ETTMP PEGDA hydrogels using Hertz Contact Theory and simultaneously analyze both the model drug release and gel erosion in situ. This method involves curing a drug loaded hydrogel in a standard cuvette and placing a glass bead and phosphate buffer solution (PBS). Over time, the cross-linked network of the hydrogel breaks down, and, as a result, the ball sinks into the hydrogel. This method provides a macroscopic and inexpensive way to continuously and passively measure properties of the hydrogel as the hydrogel degrades. By plotting both the …

Advanced Raman Spectroscopy Detection Of Oxidative Damage In Nucleic Acid Bases: Probing Chemical Changes And Intermolecular Interactions In Guanosine At Ultralow Concentration, Francesca Ripanti, Claudia Fasolato, Flavia Mazzarda, Simonetta Palleschi, Marina Ceccarini, Chunchun Li, Margherita Bignami, Enrico Bodo, Steven E.J. Bell, Filomena Mazzei, Paolo Postorino

Bioelectrics Publications

DNA/RNA synthesis precursors are especially vulnerable to damage induced by reactive oxygen species occurring following oxidative stress. Guanosine triphosphates are the prevalent oxidized nucleotides, which can be misincorporated during replication, leading to mutations and cell death. Here, we present a novel method based on micro-Raman spectroscopy, combined with ab initio calculations, for the identification, detection, and quantification of oxidized nucleotides at low concentration. We also show that the Raman signature in the terahertz spectral range (<100 >cm(-1)) contains information on the intermolecular assembly of guanine in tetrads, which allows us to further boost the oxidative damage detection limit. Eventually, we …

Doping Graphene With Substitutional Mn, Pin-Cheng Lin, Renan Villarreal, Simona Achilli, Harsh Bana, Maya N. Nair, Antonio Tejeda, Ken Verguts, Stefan De Gendt, Manuel Auge, Hans Hofsäss, Steven De Feyter, Giovanni Di Santo, Luca Petaccia, Steven Brems, Guido Fratesi, Lino M. C. Pereira

Advanced Science Research Center

We report the incorporation of substitutional Mn atoms in high-quality, epitaxial graphene on Cu(111), using ultralow-energy ion implantation. We characterize in detail the atomic structure of substitutional Mn in a single carbon vacancy and quantify its concentration. In particular, we are able to determine the position of substitutional Mn atoms with respect to the Moiré superstructure (i.e., local graphene-Cu stacking symmetry) and to the carbon sublattice; in the out-of-plane direction, substitutional Mn atoms are found to be slightly displaced toward the Cu surface, that is, effectively underneath the graphene layer. Regarding electronic properties, we show that graphene doped with substitutional …

Cold Plasma Enhanced Active Sites On Supported Nip Nanoparticles For The Oxygen Evolution Reaction, Michael Ricci

Williams Honors College, Honors Research Projects

Identifying materials to efficiently facilitate the oxygen evolution reaction (OER) is key to advancing water electrolysis, an essential technology in the pathway towards a sustainable energy future. Here, we explore cold-plasma treatment as a facile method to enhance the activity of NiP nanoparticles supported on activated carbon. NiP nanoparticles were synthesized on an activated carbon support using a solid-state method and were then treated with argon, oxygen, and hydrogen plasmas for extended times. In all cases, plasma treatment reduced the number of active sites on the support. OER activity was evaluated by testing the materials in alkaline conditions. The activities …

Testing The Effectiveness Of Various Fabrics For Use In Protective Face Coverings, Isaac Daley

Williams Honors College, Honors Research Projects

Facemask requirements have been heavily implemented as a result of the COVID-19 pandemic. The purpose of this study was to test various fabrics that could be used in face coverings and determine which materials are best for reducing virus transmission rates. Of the seven fabrics tested, five were conventional home-use fabrics and the other two were surfaces modified with hydrophobic organosilanes. Wettability and droplet adherence tests were performed on each material. The materials that performed the best were decyltrichlorosilane (DTS) modified cotton, perfluorotrichlorosilane (FTS) modified cotton, and polyester. Contact angles for water droplets on these fabrics were 106°, 93°, and …

Wetting Transition On 3d-Printed Featured Surface, Hannah Pineault

Williams Honors College, Honors Research Projects

The primary objective of this research project was to gain a better understanding of surface characteristics to produce a long-lasting superhydrophobic or superhydrophilic surface. In other words, when will a droplet of water remain on top of a featured surface and when does the transition occur to water filling the grooves of the surface? This research focused on how to best fabricate porous structures that would stay completely dry at all times by preventing the liquid from penetrating. In particular, we followed the behaviors of water droplets placed on top of 3-D printed featured surfaces with various geometries and surface …

Comparison Of The Effects Of Hofmeister Ions On Transition Temperature Of Two Thermoresponsive Polymers, Ashley Knight

Williams Honors College, Honors Research Projects

It has been hypothesized that poly(vinylmethylether) (PVME) could be used to replace poly(N-isopropylacrylamide) (pNIPAAM) in various thermoresponsive applications based on literature searches and previous lab experiments. PVME is cheaper and easier to process, and would make pNIPAAM applications more cost effective. In order to verify this, experimental data was gathered on the effects of four anions from the Hofmeister series (SO₄₂-, Cl-, I-, and SCN-) on the lower critical solution temperature (LCST) of pNIPAAM and compared to previous data collected on PVME. Commercial pNIPAAM from Sigma Aldrich and Polysciences were used. The reported LCST range for pNIPAAM is …

Investigation Of Surface Charge Using Faraday Bucket Measurements: Analysis On Electrospun Polyvinylidene Fluoride Fiber Mats, Ryan Kantenwein

Williams Honors College, Honors Research Projects

Piezoelectric polymer materials such as polyvinylidene fluoride exhibit beneficial properties for use in personal protective equipment (PPE) against viral contaminants and other foreign microparticles. The electrospinning process of this material allows for surface charge to develop over a controlled surface area. Kynar 761 at 10 wt% demonstrates increased surface charge after withstanding a flow of aerated NaCl particles from a TSI 8130 instrument. Utilizing voltage measurements from a Faraday bucket, 18 wt% Kynar 761 and MG-15 exhibit surface charge when undergoing an electrospinning process; however, Kynar MG-15 displays lower charge values than that of Kynar 761. Several critical factors such …

Simulation Of Water Loading In Filter Medium, Anthony Mole

Williams Honors College, Honors Research Projects

This research will model fluid flow through a filter plugged with water droplets using FlexPDE software. After simulations are run at various initial conditions, curves will be developed to correlate the permeability of the filter to variables like water droplet distribution and size.

Relating Modified Ergun's Equation To Hindered Settling Correlations, Ryan Zahniser

Williams Honors College, Honors Research Projects

Correlations were developed between the Modified Ergun’s and Hindered settling correlations under the condition of dense packing of particles in the bed. As the porosity of the slurry increases, so does the interference between particles in the solution which mimics the behavior of a packed or densely concentrated fluidized bed. The similarity between the two sets of conditions was modeled using mathematical equations to calculate settling velocities and pressure drops by means of the Hindered Settling correlations and Modified Ergun’s equation at porosities ranging from 0.4242 to 0.89. The results showed that a porosity of 0.52 and 0.009 ft particle …

Quantifying Mafenide Release From 3d Printed Phenylalanine-Coumarin Copolyester Scaffolds, Jacob Seeh

Williams Honors College, Honors Research Projects

This project addressed burn wound healing through controlled release of the antibacterial drug mafenide encapsulated by a copolyster into 3D printed scaffolds. Scaffolds were printed at 25^oC and 0.77-1 bar in a cross-hatch pattern with uniform thickness, distance between parallel layers, and diameter then photo-crosslinked. The number of scaffolds available for testing was limited by the amount of polymer that could be synthesized. A high-performance liquid chromatography method was developed specifically for this experiment and used to determine daily release of mafenide from the scaffold into a 2-mL phosphate buffer solution. During the first 24 hours a large …

Water Absorption Enhancement Of Sodium Poly Acrylate And Poly(2-Acrylamido-2-Methylpropane Sulphonic Acid) Based Hydrogel Mixtures, Sohair A. Darwish, Ibrahim M. Ibrahim, Nasser Y. Mostafa, Mostafa A. Radwan, Mohamed A. Sadek, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

Introduction: Hydrogels are hydrophilic polymers which are cross-linked to form three-dimensional structures, which can absorb, swell and retain huge amounts of water or aqueous fluids. Objective: This paper reports the preparation and characterization of Poly (2-Acrylamido-2-Methylpropane Sulphonic Acid) (PAMPS) hydrogel with different crosslinking intensities. Methodology: 2-Acrylamido-2-methylpropane sulfonic acid (AMPS) monomer was purchased from Alfa Aesar Company as reagent grade. It was used as received (>98% purity) without any further purification. PAMPS hydrogel was prepared by free radical crosslinking solution polymerization of AMPS in water at room temperature under a nitrogen blanket in cylindrical glass tubes. The characteristics of the …

Better Heat And Power Integration Of An Existing Gas-Oil Plant In Egypt Through Revamping The Design And Organic Rankine Cycle, Mamdouh A. Gadalla, Alaa Elmasry, Ibrahim Alhajri, Fatma H. Ashour, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

Objective: The current study aims mainly to Maximize Condensate Recovery (NGLs), focusing on a gas processing train of Gas-Oil Separation Plant (GOSP) located in Egypt with a capacity of 4,230 kmole/h. Methods: The research study accounts for the constraint of Reid Vapor Pressure (RVP) specification, which makes the storage in floating roof tanks is of a great risk. The study proposes the installation of the cryogenic train that recovers condensates (C4+). This train comprises of compression unit, expansion unit, three-phase separators and a re-boiled absorber. The problem of RVP will no longer exist because of the re-boiled absorber achieving RVP …

Equilibrium And Kinetic Study On The Biosorption Of Trypan Blue From Aqueous Solutions Using Avocado Seed Powder, Tamer T. El-Idreesy, Omar Khoshala, Amin Firouzi, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

This research aims to investigate the removal of trypan blue dye from aqueous solutions by employing ground avocado seeds powder, a low-cost biowaste adsorbent (biosorbent), under various experimental conditions. The effect of contact time, initial dye concentration, and adsorbent dose on dye removal were studied. The experimental kinetic data were fitted to pseudo-first order and pseudo-second-order kinetic models. Results imply that adsorption of trypan blue on the avocado seed adsorbent nicely followed the pseudo-second-order kinetic model. Equilibrium isotherms were analyzed by Langmuir and Freundlich isotherms, where Langmuir isotherm described the isotherm data with a high-correlation coefficient (R2=0.9948) closer to unity, …

Synthesis Of Uio-66 Metal Organic Frameworks, Nicholas Johnston, Larissa Lagria

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.