Chemical Engineering Commons^™

Study On Engine Performance And Exhaust Pollutant Using Isobutanol - Calophyllum Inophyllum Biodiesel - Diesel Ternary Blends In A Diesel Engine, Mohd Azham Mohd Alwi

Student Works (2020-2029)

Renewable energy sources such as biodiesel and bio-alcohol are desirable and are alternative to meet energy demand and control emission, from renewable sources such as ethanol, methanol, butanol, and pentanol. Biodiesel has a notable interest in offering many advantages with few disadvantages and needs to be extended for comprehensive use. Applying greater alcohols such as butanol with biodiesel in fuel blends is a beneficial technic to enhance the fuel characteristics and use biodiesel and alcohol efficiently. Isobutanol is an organic compound that has very low volatility, higher-chain alcohols have energy densities close to gasoline. It is not as volatile or …

Removal Of Selected Organic Pollutants In Landfill Leachate Using Natural Coagulant From Dillenia Indica Seed Extract, Aziz Ahmed

Student Works (2020-2029)

This study is aimed to identify and characterise novel green coagulant from Dillenia indica seed extracts for the removal of selected persistent organic pollutants (POPs) in landfill leachate using coagulation-flocculation process. The removal efficacy of D. indica seed extracts was compared with commercially available coagulants namely Locust Bean Gum (LBG) and alum. Additionally, it focused on the optimisation of the variables of the coagulation-flocculation process such as coagulants dosage, pH and mixing speed for POPs removal. The functional groups, morphological behaviour and surface area of the dried flocs and samples were analysed using Fourier transform infrared (FTIR), Scanning Electron Microscopy …

A Water Quality And Contaminant Source Assessment Of Arbuckle Creek In Fayette County, West Virginia, Sarah Ashby Simonton

Theses, Dissertations and Capstones

Arbuckle Creek, located in Minden, West Virginia, is a stream that runs through Oak Hill, WV and is characterized by the presence of the Oak Hill Wastewater Treatment Plant and the history of the contamination of polychlorinated biphenyl (PCBs) from the copious amount of contamination from the Shaffer Equipment Site and the pollution from mining completed in the area throughout the 1900’s. In order to assess the reaches of the current water quality, samples were collected and assessed for benthic macroinvertebrates, water parameters, benthic algae, and habitat. This was accomplished using the West Virginia Department of Environmental Protection (WVDEP) agency’s …

“Greener” Chemical Modification Of Cellulose Nanocrystals Via Oxa-Michael Addition With N-Benzylmaleimide, Mohammad Jahid Hasan, Ashley E. Johnson, Esteban E. Ureña-Benavides

Faculty and Student Publications

Surface modification of cellulose nanocrystals (CNCs) was conducted by an oxa-Michael addition of primary hydroxyl groups on the CNC surface with N-Benzylmaleimide (BnM). Six principles of green chemistry were used to obtain the hydrophobized CNC. Two catalytic approaches were used, a self-catalyzed reaction where alkyl sulfuric acid on the surface of the CNC was the catalyst, and a base-catalyzed approach using triethylamine (TEA). DMSO was chosen as reaction solvent due to its low cost, low toxicity and ability to disperse native CNC compared to other polar diprotic solvents. NMR and FTIR studies confirmed the successful modification of CNCs in both …

Effects Of Resin Chemistries On The Selective Removal Of Industrially Relevant Metal Ions Using Wafer-Enhanced Electrodeionization, Humeyra B. Ulusoy Erol, Christa N. Hestekin, Jamie A. Hestekin

Chemical Engineering Faculty Publications and Presentations

Wafer-enhanced electrodeionization (WE-EDI) is an electrically driven separations technology that occurs under the influence of an applied electric field and heavily depends on ion exchange resin chemistry. Unlike filtration processes, WE-EDI can be used to selectively remove ions even from high concentration systems. Because every excess ion transported increases the operating costs, the selective separation offered by WE-EDI can provide a more energy-efficient and cost-effective process, especially for highly concentrated salt solutions. This work reports the performance comparison of four commonly used cation exchange resins (Amberlite IR120 Na⁺, Amberlite IRP 69, Dowex MAC 3 H⁺, and …

Surface And Interfacial Phenomena Between Soil And Oil, Md Firoz Ahmed

Electronic Theses and Dissertations

Crude oil and motor oil spills on land have severe environmental consequences that pose threats to both humans and natural resources. It is particularly important to know the flow behavior of oils to protect terrestrial ecosystems from this kind of damage. The spreading kinetics, contact angle (CA), and droplet baseline studies of crude oil and motor oils were investigated over several realistic soil-based matrices composed of topsoil (silt-dominant), sand, clay, and moisture. It was found that with an increase in moisture content (MC), the spreading area decreased, and initial spreading time increased for all given oil. The initial CA generally …

Solubility Measurements Of Hydrophobic Solutes In Supercritical Carbon Dioxide And Subsequent Impregnation Into Paper Substrates For Surface Modifications, Arghavan Beheshtimaal

Electronic Theses and Dissertations

Supercritical Fluids (SCFs) have received a great deal of attention for their various applications in chemical, biochemical, pharmaceutical, and materials processing. In this study, we investigate surface modification to paper substrates using supercritical impregnation (SCI) techniques, with applications in food packaging. One of the key factors required for this study is understanding the solubility of hydrophobic solutes in supercritical carbon dioxide (scCO2). Polar compounds are poorly soluble in scCO2 due to their lack of polarity and frequently co-solvents are also introduced to enhance solubility. In this study, the maximum solubility of alkyl ketene dimer (AKD)/n-heptane and vegetable wax (VW)/n-heptane solutions …

Dynamic Modeling Of A Coal Mill For Simultaneous Dynamic Data Reconciliation And Parameter Estimation, Vinayak Dwivedy

Graduate Theses, Dissertations, and Problem Reports (ETD)

In comparison with other gaseous and liquid fossil fuels used in power production, a coal fired power plants requires additional equipment for fuel preparation. A medium speed mill is usually a preferred equipment which serves in grinding and drying of the raw feed coal. Due to the high recycle of coal particles within a medium speed coal mill, the mill performance is sensitive to the efficiency of grinding and classification operations within mill. The goal of this research is to study the performance of the milling system and develop a method to estimate some of the unmeasured variables, which include …

Valorization Of Xylan In Agroforestry Waste Streams, Harrison Appiah

Graduate Theses, Dissertations, and Problem Reports (ETD)

Valorization of Xylan in Agroforestry Waste Streams.

Harrison Appiah

Microwave-assisted deep eutectic solvent and gamma-valerolactone metallic chloride catalyzed conversion of xylan to furfural were investigated using a 2x3 factorial experimental design at two levels of percent microwave power, reaction time, and catalyst concentration. The levels of each factor studied were (20%, 60% microwave power, 2, 4 minutes, and 10, 20mg) respectively. The effect of three metallic chloride catalysts (LiCl, FeCl3.6H20, CuCl2) on the conversion of xylan to furfural was also investigated. The gamma-valerolactone-ferric chloride sent system exhibited the highest mean yield of furfural (56.50%). The next highest furfural yield of …

An Investigation Of The Airborne Particulate Matter Related Health Hazards Present In Makerspaces, Justin Keller

Honors Theses

Airborne particulate matter poses several health hazards ranging from pulmonary inflammation to cardiovascular disease. Particulate matter is produced through many fabrication processes common to makerspaces, such as 3D printing and laser cutting. The danger of these particles is worsened when makerspaces are retrofitted into spaces not designed with good ventilation or safety controls, such as libraries and public schools. This thesis evaluates the relationship between makerspaces and hazardous particle generation with both continuous and motion sensor controlled ventilation, showing that the latter creates unsafe working conditions. Both observational and controlled studies were conducted in Bucknell’s Mooney Lab makerspace monitoring particle …

In Situ Sers Detection Of Dissolved Nitrate On Hydrated Gold Substrates, Timo Küster, Geoffrey D. Bothun

Chemical, Biomolecular, and Materials Engineering Faculty Publications

The accurate and fast measurement of nitrate in seawater is important for monitoring and controlling water quality to prevent ecologic and economic disasters. In this work we show that the in situ detection of nitrate in aqueous solution is feasible at nanomolar concentrations through surface enhanced Raman spectroscopy (SERS) using native nanostructured gold substrates without surface functionalization. Spectra were analyzed as collected or after standard normal variate (SNV) normalization, which was shown through Principal Component Analysis (PCA) to reduce spectral variations between sample sets and improve Langmuir adsorption model fits. An additional normalization approach based on the substrate silicon template …

Catalytic Carbon Dioxide Hydrogenation To Methanol/Dimethyl Ether Over Copper-Based Catalysts, Xiao Fan

Doctoral Dissertations

Direct synthesis of dimethyl ether (DME) via CO₂ hydrogenation has received great attention, owing to the global warming caused by CO₂ emission and increasing energy demand worldwide. In this works, three major aspects of bifunctional catalysts development were studied: (1) investigation of the roles of interaction in the CuO-ZnO-ZrO₂-Al₂O₃/HZSM-5 bifunctional catalysts, (2) deactivation and regeneration of CuO-ZnO-ZrO₂-Al₂O₃ with different zeolitic catalysts for one-step CO₂ hydrogenation to dimethyl ether, and (3) study on the enhancement of activity and stability of CZZA/HZSM-5 bifunctional catalysts via the introduction of …

Review On Carbon Dioxide Utilization For Cycloaddition Of Epoxides By Ionic Liquid-Modified Hybrid Catalysts: Effect Of Influential Parameters And Mechanisms Insight, Jimmy Nelson Appaturi, Rajabathar. Jothi Ramalingam, Muthu Kumaran Gnanamani, Govindasami Periyasami, Prabhakarn Arunachalam, Rohana Adnan, Farook Adam, Mohammed D. Wasmiah, Hamad A. Al‐Lohedan

Center for Applied Energy Research Faculty and Staff Publications

The storage, utilization, and control of the greenhouse (CO₂) gas is a topic of interest for researchers in academia and society. The present review article is dedicating to cover the overall role of ionic liquid-modified hybrid materials in cycloaddition reactions. Special emphasis is on the synthesis of various cyclic carbonate using ionic liquid-based modified catalysts. Catalytic activity studies have discussed with respect to process conditions and their effects on conversion and product selectivity for the reaction of cycloaddition of CO₂ with styrene oxide. The reaction temperature and the partial pressure of CO₂ have found to play …

What Are The Dominant Flow Regimes During Carbon Dioxide Propagation In Shale Reservoirs’ Matrix, Natural Fractures And Hydraulic Fractures?, Sherif Fakher, Youssef Elgahawy, Hesham Abdelaal, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Carbon dioxide (CO₂) injection in low permeability shale reservoirs has recently gained much attention due to the claims that it has a large recovery factor and can also be used in CO₂ storage operations. This research investigates the different flow regimes that the CO₂ will exhibit during its propagation through the fractures, micropores, and the nanopores in unconventional shale reservoirs to accurately evaluate the mechanism by which CO₂ recovers oil from these reservoirs. One of the most widely used tools to distinguish between different flow regimes is the Knudsen Number. Initially, a mathematical analysis of …

A Model For Crafting Diversity, Inclusion, Respect, And Equity (Dire) Policy Statements Toward Catalyzing Organizational Change, Carolyn Gentle-Genitty, Breanca Merrit, Ann C. Kimble-Hill

Founder’s College - Scholarship and Professional Work

In light of the Black Lives Matter movement, the Science, Technology, Engineering, and Mathematics (STEM) community has had to reflect on how their organizations can address their disparities in identity representation. To that end, the ACS Committee on Minority Affairs (CMA) has been called upon to advise various levels of the chemistry enterprise in their interventions, such as structured and actionable policy statements. As a result, this work was created to provide a model for all organizations to write catalytic diversity, inclusion, respect, and equity (DIRE) policy statements. The model herein acknowledges active tensions and leverages theory, analysis, and practical …

Oxygen Harvesting From Carbon Dioxide: Simultaneous Epoxidation And Co Formation, Han Xu, Muhammad Shaban, Sui Wang, Anas Alkayal, Dingxin Liu, Michael G. Kong, Felix Plasser, Benjamin R. Buckley, Felipe Iza

Bioelectrics Publications

Due to increasing concentrations in the atmosphere, carbon dioxide has, in recent times, been targeted for utilisation (Carbon Capture Utilisation and Storage, CCUS). In particular, the production of CO from CO₂ has been an area of intense interest, particularly since the CO can be utilized in Fischer–Tropsch synthesis. Herein we report that CO₂ can also be used as a source of atomic oxygen that is efficiently harvested and used as a waste-free terminal oxidant for the oxidation of alkenes to epoxides. Simultaneously, the process yields CO. Utilization of the atomic oxygen does not only generate a valuable product, …

Preparation Of Co-Electrodeposited Pd-Au Nanocatalyst For Methanol Electro-Oxidation, Islam M. Al-Akraa, Ahmad M. Mohammad, Yaser M. Asal, Sayed S. Abd El Rehim

Chemical Engineering

No abstract provided.

Kinetics Of Photolysis And Photocatalytic Oxidation Of Ammonium Sulfite For Hydrogen Production, Moustafa A. Soliman, Maryam Zakaria

Chemical Engineering

The production of hydrogen via photocatalytic water splitting is one of the most promising technologies for obtaining chemical energy from direct solar energy while maintaining the least possible waste and pollutants. In this paper, we obtain the kinetic parameters necessary for the design of a photoreactor for photolysis and photocatalysis of ammonium sulfite solution. For the case of photolysis, we obtain the kinetics for the effect of changing the pH on the produced amount of hydrogen. For the case of photocatalysis, the intrinsic kinetic parameters of photocatalysis of water splitting reaction of ammonium sulfite and water in the presence of …

Analysis Of A Solar Hybrid Sulfur Ammonia Copper Oxide Thermochemical Cycle For Hydrogen Production, Moustafa A. Soliman, Abdel Moniem Abomosalam, Noran Shedid, Mohamed Othman, Toka Hatem, Marc Samer

Chemical Engineering

Solar energy conversion to hydrogen by water splitting is a promising technique because it is sustainable and environmentally friendly. One option for water splitting is through thermochemical cycles in which one of the steps is electrolytic or photocatalytic. In this paper, the economics of a thermochemical process that combines photocatalysis, photovoltaics, high temperature thermal energy and energy storage to harvest solar energy is assessed. This paper focuses on the standard hybrid sulfur ammonia thermochemical cycle (SA) in which the electrolytic step of the hydrogen production from ammonium sulfite solution is augmented by a photocatalytic step. Trying to make use of …

Convective-Diffusive Transport In Krogh Cylinders: A Model For Pharmacokinetics, Xianjie Qiu

Doctoral Dissertations

"Drug delivery to inside of the tumor is the important problem. The dynamics of drug delivery is presented here. Previously and particularly for directed delivery, a stirred tank model has been used, which appears to have worked well when compared to experiments. However, the stirred tank models do not include all the mass transfer resistances and towards that end we have used a distributed system called Krogh cylinder. This study focuses on the Krogh cylinder model simulation, both on the fluid flow and the mass transfer. The capillary network is broken down into cylindrical cells, each containing a capillary and …

Studies On Protein Solubility, Ke Li

Doctoral Dissertations

"Solubility is a critical factor of protein-based drugs during processing and patient administration. This study focused on two aspects of solubility: one was the poly (ethylene) glycol (PEG) precipitation of monoclonal antibodies (mAbs) and another was crystallins aggregation that is associated with cataracts. Protein precipitation by PEG is a common technique for downstream processing. The effects of pH, ionic strength and the exclude volume effect on the protein precipitation by PEG were extensively studied, but the effects of glycosylation on protein precipitation by PEG has not been examined. Protein aggregation is not only a problem in downstream processing, but it …

Extracting Metallurgy Contaminants And Hydrocarbons Removing From Water And Industrial Wastewater Using Enhanced Emulsion Liquid Membrane With Nanoparticles And Ionic Liquid, Qusay Al-Obaidi

Doctoral Dissertations

It is an uphill battle to extract pollutants such as heavy metals, hydrocarbons, and radioactive metals from water and industrial wastewater. Emulsion liquid membrane (ELM) is an emerging technology that combines extraction/recover and stripping in one stage to extract/recover heavy metals and/or hydrocarbons from water and wastewater. ELM devised a way to clean up heavy metals and/or hydrocarbons from the water and wastewater where its primary chemicals can be recycled and reused.

In this work, the Emulsion Liquid Membrane (ELM) has been enhanced by adding nanoparticles and ionic liquid to significantly improve the recovery of the water-based contaminants of heavy …

Geochemical Study Of The Early Cretaceous Fahliyan Oil Reservoir In The Northwest Persian Gulf, Abbas Khaksar Manshad, Reza Sedighi Pashaki, Jagar A. Ali, Stefan Iglauer, M. Memariani, Majid Akbari, Alireza Keshavarz

Research outputs 2014 to 2021

Three crude oil samples from the Fahliyan Formation in ‘KG’ and ‘F’ fields in the northwest Persian Gulf, namely KG-031, F9A-3H and F15-3H for the geochemical study. In this study, the physicochemical properties, gas chromatography (GC, GC Mass) and (Detailed Hydrocarbon Analysis) DHA analyses for the collected Fahliyan oils were carried out. The API, Trace Element (Ni, V) and S% parameters indicated that the Fahliyan oil was generated from a source rock which deposited in reducing environment condition with a carbonate-shale compound lithology. Moreover, low pour point, higher S% and low viscosity parameters of “KG” sample confirmed the existence of …

Design And Perspective Of Amorphous Metal Nanoparticles From Laser Synthesis And Processing, Shun-Xing Liang, Lai-Chang Zhang, Sven Reichenberger, Stephan Barcikowski

Research outputs 2014 to 2021

Amorphous metal nanoparticles (A-NPs) have aroused great interest in their structural disordering nature and combined downsizing strategies (e.g. nanoscaling), both of which are beneficial for highly strengthened properties compared to their crystalline counterparts. Conventional synthesis strategies easily induce product contamination and/or size limitations, which largely narrow their applications. In recent years, laser ablation in liquid (LAL) and laser fragmentation in liquid (LFL) as "green"and scalable colloid synthesis methodologies have attracted extensive enthusiasm in the production of ultrapure crystalline NPs, while they also show promising potential for the production of A-NPs. Yet, the amorphization in such methods still lacks sufficient rules …

Characterization And Analysis Of Naturally Fractured Gas Reservoirs Based On Stimulated Reservoir Volume And Petro-Physical Parameters, Ali Al-Rubaye, Ahmed Al-Yaseri, Muhammad Ali, Hisham Ben Mahmud

Research outputs 2014 to 2021

© 2021, The Author(s). Fracture is one of the most important geological phenomena that affect the production of hydrocarbon compounds in broken carbonate reservoirs. However, fracture controlling factors must be combined with well data to achieve accurate fracture modeling. Therefore, structural data, drilling data, well flow diagrams, cores data, wells production data, and dynamic reservoir data have been considered here. Finally, by combining the above-mentioned information and through statistical and mathematical methods, the mechanism of fracture creation, general trends, and dominant fracture patterns are determined. These patterns are directly related to the tectonic regime and the stresses governing the region. …

Physicochemical Characterisation Of Zirconia Nanoparticles Based Sodium Alginate Polymer Suspension For Enhanced Oil Recovery, Udit S. Mohanty, Faisal Ur Rahman Awan, Muhammad Ali, Adnan Aftab, Alireza Keshavarz, Sefan Iglauer

Research outputs 2014 to 2021

Biopolymers have been employed in enhanced oil recovery (EOR) due to their high viscosity and significant effects on waterflooding performance. Sodium alginate (NaAlg) is an excellent biopolymer that is extracted primarily from brown algae. It has been used in the biotechnology industry as a thickening agent, colloidal stabilizer, and oil recovery application. In the present study, a series of sodium alginate/zirconium oxide nanoparticle suspensions were prepared via solution mixing, and the effect of nanoparticle content, polymer concentration, temperature, salinity was investigated on the rheological behavior using a concentric cylinder dynamic rheometer. The rheology results revealed that the lower concentration of …

Shale Adhesion Force Measurements Via Atomic Force Microscopy, Nikolai Mitiurev, Michael Verrall, Svetlana Shilobreeva, Alireza Keshavarz, Stefan Iglauer

Research outputs 2014 to 2021

Wettability of sedimentary rock surface is an essential parameter that defines oil recovery and production rates of a reservoir. The discovery of wettability alteration in reservoirs, as well as complications that occur in analysis of heterogeneous sample, such as shale, for instance, have prompted scientists to look for the methods of wettability assessment at nanoscale. At the same time, bulk techniques, which are commonly applied, such as USBM (United States Bureau of Mines) or Amott tests, are not sensitive enough in cases with mixed wettability of rocks as they provide average wettability values of a core plug. Atomic Force Microscopy …

Enhanced Oil Recovery By Hydrophilic Silica Nanofluid: Experimental Evaluation Of The Impact Of Parameters And Mechanisms On Recovery Potential, Tariq A. Chandio, Muhammad A. Manan, Khalil R. Memon, Ghulam Abbas, Ghazanfer R. Abbasi

Research outputs 2014 to 2021

Nanofluids as an EOR technique are reported to enhance oil recoveries. Among all the nanomaterial silica with promising lab results, economic and environmental acceptability are an ideal material for future applications. Despite the potential to enhance recoveries, understanding the two-fold impact of parameters such as concentration, salinity, stability, injection rate, and irreproducibility of results has arisen ambiguities that have delayed field applications. This integrated study is conducted to ascertain two-fold impacts of concentration and salinity on recovery and stability and evaluates corresponding changes in the recovery mechanism with variance in the parameters. Initially, silica nanofluids’ recovery potential was evaluated by …

Physical Vapor-Deposited Silver (Ag)-Based Metal-Dielectric Nanocomposites For Thin-Film And Coating Applications, Mohammad Nur-E-Alam, Mohammad Kairul Basher, Mikhail Vasiliev, Narottam Das

Research outputs 2014 to 2021

Metallic thin-film materials and nanoparticles (mainly silver (Ag)-based) are recently being used in many nano-technological applications, including sensors, reflective heat-mirror coatings, and antibacterial coatings. The physical vapor deposition technique has attracted significant attention for Ag-based nanocomposites with tailoring of the structural and optical properties of metallic thin films, thus allowing for further improvements and application possibilities in various existing fields, namely electronics, catalysis, magnetics, and optics, alongside the environment and health and new emergent fields, particularly thin-film coatings. This study highlights the preparation, characterization, properties, and possible future application directions of several types of silver (Ag)-based nanocomposite thin films prepared …

The Study Of Effects Of Catalyst Groups, Chain Lengths, And Oxygen Vacancies On Ketonization Of Methyl Ester, Thanwarat Rattanachartnarong

Chulalongkorn University Theses and Dissertations (Chula ETD)

The selectivity of symmetrical ketone was investigated in metal oxide catalyst by the ketonization of long-chain methyl ester at 400 oC and atmospheric pressure. The main problem of the ketonization of long-chain methyl ester was the cracking reaction. To investigate the effect of oxygen vacancies with selectivity of the main product, the metal oxide catalysts were charactered by SEM, XPS, XRD, TGA, TPO, H2-TPD, and NH3-IR. The results indicated that the amphoteric catalyst shown better performance than pure acidic due to the acid-base properties. Moreover, the selectivity of the main product depends on the hydrogen spillover which was the key …