Chemical Engineering Commons^™

Applications Of Cfd Simulations On Microfluidic Systems For Nanoparticle Synthesis, Yuehao Li

LSU Master's Theses

Microfluidics has been extensively investigated as a unique platform to synthesize nanoparticles with desired properties, e.g., size and morphology. Compared to the conventional batch reactors, wet-chemical synthesis using continuous flow microfluidics provides better control over addition of reagents, heat and mass transfer, and reproducibility. Recently, millifluidics has emerged as an alternative since it offers similar control as microfluidics. With its dimensions scaled up to millimeter size, millifluidics saves fabrication efforts and potentially paves the way for industrial applications. Good designs and manipulations of microfluidic and millifluidic devices rely on solid understanding of fluid dynamics. Fluid flow plays an important role …

A Review Of Offshore Blowouts And Spills To Determine Desirable Capabilities Of A Subsea Capping Stack, Louise Matilde Smith

LSU Master's Theses

The events surrounding the Deepwater Horizon disaster have changed the face of deepwater operations. In order to continue drilling in the Gulf of Mexico, the regulatory body, the Bureau of Safety and Environmental Enforcement (BSEE), has required that applications to conduct work in the Gulf of Mexico (GOM) include a plan to stop, capture, or contain any uncontrolled release of fluids. The capping and containment systems built and implemented by BP during the event are an excellent starting point for minimizing pollution from deepwater subsea blowouts, but the system has limitations. The industry recognizes these limits but is currently focused …

An Experimental And Theoretical Critique Of Flow Model Accuracy, Shannon Ray Chollett

LSU Master's Theses

In today’s exploration and production environment it is required that engineers must collect and use vast amounts of data for flow model construction and calibra- tion, as well as reservoir estimation and optimization. With modern technology, the data volume can be overwhelming. It is necessary that data monitoring and calibration are highly efficient. It is also essential that physical and mathematical models can be tested in repeatable, inexpensive experiments. The experiments described in this thesis will develop and perform verification of algorithms and can generate prior geomodels, collect and process seismic refraction data, collect and process production data, and calibrate …

Boron Composite Nanoparticles For Enhancement Of Bio-Fuel Combustion, Neng Wang

LSU Master's Theses

Bio-fuels such as ethanol are good candidates to replace fossil fuels, which are being depleted, and whose combustion is associated with net production of greenhouse gases and other environmental issues. However, bio-fuels have low energy densities and can be subject to incomplete combustion. Boron is a promising additive for bio-fuels in combustion applications. It can increase their overall heat release and reduce ignition temperature, because boron itself is among the highest energy density materials. In this study, different B/rare earth oxide and B/Fe composite nanoparticles were produced by simple mechanical milling. Also, a new low temperature milling method was developed …

A Novel Rna Extraction Method For Cyanobacteria, Zenghui Zhang

LSU Master's Theses

Research on production of polyhydroxyalkanoates (PHA) by microorganisms has captured attention over the last two decades, since PHA have similar properties as petroleum-based thermoplastics, yet are close to carbon neutral and made from renewable sources. Cyanobacteria are considered to be good PHA producers because of their simple nutrient requirements (mainly water, sunlight and CO2) and fast cell growth. However, knowledge of metabolisms behind PHA production by cyanobacteria is limited. Therefore, gene expression analysis of cyanobacteria is required to get a thorough understanding at the molecular level, and gene expression analysis requires the extraction of high quality RNA. Extracting high quality …

Advanced Nanostructured Electro-Catalysts For Electricity Generation And Biorenewable Alcohol Conversion, Zhiyong Zhang

Dissertations, Master's Theses and Master's Reports - Open

In my Ph.D research, a wet chemistry-based organic solution phase reduction method was developed, and was successfully applied in the preparation of a series of advanced electro-catalysts, including 0-dimensional (0-D) Pt, Pd, Au, and Pd-Ni nanoparticles (NPs), 1-D Pt-Fe nanowires (NWs) and 2-D Pd-Fe nanoleaves (NLs), with controlled size, shape, and morphology. These nanostructured catalysts have demonstrated unique electro-catalytic functions towards electricity production and biorenewable alcohol conversion.

The molecular oxygen reduction reaction (ORR) is a long-standing scientific issue for fuel cells due to its sluggish kinetics and the poor catalyst durability. The activity and durability of an electro-catalyst is strongly …

Processes Involving Acid Gas Solubility In Room Temperature Ionic Liquids (Rtils), Fadekemi E. Osideinde

Electronic Theses and Dissertations

The literature contains a number of thermodynamic studies involving the solubility of acid gases in RTILs. This thesis looks at using these studies in the context of two processes: membrane separation and absorption refrigeration cycles. The first part of this study investigated the separation of a mixed dry gas feed of CO2/CH4 by four Stabilized Ionic Liquid Membranes (SILMs); 1-Ethyl-3-methlyimidazolium dicyanamide, [emim][DCA], 1-ethyl-3-methylimidazolium thiocyanate, [emim][SCN], 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [emim][Tf2N] and 1-Butyl-3-methylimidazolium nitrate, [bmim][NO 3]. The selectivities and permeances for the CO2/CH 4 feed were measured in all four SILMs at various partial pressures of CO2 in the feed and at two …

Preprocessing Of Biomass Using Mechanical, Chemical And Microbial Techniques, Swetha Mahalaxmi

Electronic Theses and Dissertations

Biomass-derived fuels have acquired a lot of attention recently due to increasing emphasis on energy independence, efforts to utilize abundance of green resources and mitigation of greenhouse gas emissions. Grasses, agricultural residues, animal residues and waste, used oils, etc., can be used as starting materials in the production of biofuels. Various preprocessing techniques used in the preprocessing of biomass, such as microbial preprocessing, mechanical preprocessing and chemical pretreatment, are used for enhancing the digestibility of biomass to sugars for ethanol production. In this work, studies were conducted to improve the microbial, chemical and mechanical preprocessing of switch grass by decreasing …

Admicellar Polymerization To Compatibilize Calcium Carbonate With Oil-Based Drilling Mud, Olugbenga Samuel Ojo

Electronic Theses and Dissertations

Weighting agents like calcium carbonate (CC) are added to drilling mud to improve mud properties and performance during oil and gas drilling operations. Oil-based mud (OBM), a more preferred drilling mud, being hydrophobic is particularly non-compatible with hydrophilic CC. This work explored an economically viable admicellar polymerization technique to surface-modify the high energy hydrophilic CC surface to a low energy hydrophobic surface by polymerizing organic styrene monomer within an admicelle of nonionic surfactant Triton X-100 adsorbed on the CC surface. BET N2 particle size analysis, Soxhlet extraction of the coated polymer, Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectra analysis, and …

"Lead-Free Solders Are Currently Used In The Electronic Components Industry…", Timothy Mead

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Investigation Of Carbon Corrosion Resistance Of Cnt Containing Electrode, Diana Larrabee, William A. Rigdon, Eli Mcpherson, Joshua Sightler, Xinyu Huang

Faculty Publications

Carbon support corrosion is one of the major degradation mechanisms of polymer electrolyte membrane (PEM) fuel cell. Carbon oxidation occurs in PEM electrode and is accelerated at high potential created by adverse operating conditions and improper distribution of reactants and products [1, 2, 3]. Carbon corrosion can lead to the thinning of the electrode layer and severe performance degradation. The detailed mechanisms of carbon support corrosion induced performance loss are still not fully understood; it is believed that the following events contribute to the decay: (1) structural collapse of the porous electrode due to the loss of carbon; (2) carbon …

Evaluation Of The Reagan And Lamotte Sandstones In Southwestern Missouri For Carbon Dioxide Sequestration, Todd Jeffrey Miller

Masters Theses

"Carbon dioxide sequestration has been proposed as a way to reduce anthropogenic carbon dioxide emissions. Several characteristics are required in order for a geologic formation to be suitable for sequestration. There must be an impermeable confining layer to restrain CO₂ migration toward the surface, the porosity and permeability must be high enough to allow for long term injection and substantial storage capacity, and the formation must be strong enough for long term injection to occur without inducing fractures. In this work, The Reagan and Lamotte Sandstones near Springfield, Missouri were evaluated for the potential for carbon dioxide sequestration. The Derby-Doe …

Application Of Electrospinning Technique In The Fabrication Of A Composite Electrode For Pemfc, Joshua Sightler, Eli Mcpherson, William A. Rigdon, Xinyu Huang

Faculty Publications

The Pt/C catalysts were mixed with carbon nanotube (CNT), Nafion™ dispersion and a fiber former, polymer poly-acrylic acid (PAA), to form an ink. The ink was deposited onto aluminum foil attached to a rotating collector via an electrospinning process. The ink composition, mixing procedure, and the E-spin parameters were studied for producing a uniform nanofiber mat on the aluminum substrate. The fiber-mat containing active catalyst ingredients was heat treated and decal transferred onto a Nafion membrane to form a membrane electrode assembly (MEA).

A Study Of The Electrocoalescence On Spherical Droplets In A Flow Focusing Juction Microchannel, Shady A. Habib

Dissertations and Theses

No abstract provided.

Equilibrium Conditions Of Hydrate-Forming Pickering Emulsions, Radha Ambekar

Dissertations and Theses

A key factor in hydrate risk management for an oil-governing system is the stability of the emulsified water with gas hydrate formation. The kinetics of formation of cyclopentane hydrates is investigated in a water-in-oil emulsion using differential scanning calorimetry with the effect of surfactant Span 80. In a classical DSC experiment, an emulsion sample is subjected to a regular cooling and heating cycle between temperatures that include freezing and melting of the dispersed droplets. New phase equilibrium data of (cyclopentane hydrate + water 60:40) emulsions, in the concentration range from 0.1 to 2% of Span 80, is determined at atmospheric …

Study Of Air Bubble Injection Into Laminar And Turbulent Water Flow Through An Annular Test Section, Debbrata Das

Dissertations and Theses

Injection of bubbles into a vertical upward flow of water in an annular flow channel was studied experimentally under laminar and turbulent conditions. In order to measure the size and shape of the bubbles, a flow visualization system was set up in a vertical test section with a high speed video camera. A PIV measurement technique was also used to determine laminar and turbulent velocity profiles in the liquid stream. In this study, an efficient image processing methodology was used to obtain the velocity profiles, bubble size, shapes and trajectory at different Reynolds numbers. The measured velocity profiles matched theoretical …

Hydrate Formation Using Dowfax Gemini Surfactants, Franchette Viloria

Dissertations and Theses

"Gas hydrate formation is a stochastic and slow process. However, the use of a small amount of surfactant can speed up the rate of hydrate formation. This work investigates the effect of two Dow surfactants, Dowfax 2A1 and Dowfax C6L, on gas hydrate formation, first by determining the adsorption isotherms via liquid-liquid titration methods, and then investigating the role in methane hydrate formation in a non-stirred batch reactor. Both surfactants have almost similar structure, sharing doubly charged headgroups, but these surfactants express different effects on hydrate formation. 2A1 and C6L both show monolayer formation at around concentration of 1.0 mM; …

Electrospun Chitosan Nanofibers For Virus Removal, Bingyu Bai

Dissertations, Master's Theses and Master's Reports - Open

Electrospinning uses electrostatic forces to create nanofibers that are far smaller than conventional fiber spinning process. Nanofibers made with chitosan were created and techniques to control fibers diameter and were well developed. However, the adsorption of porcine parvovirus (PPV) was low. PPV is a small, nonenveloped virus that is difficult to remove due to its size, 18-26 nm in diameter, and its chemical stability. To improve virus adsorption, we functionalized the nanofibers with a quaternized amine, forming N-[(2-hydroxy-3-trimethylammonium) propyl] chitosan chloride (HTCC). This was blended with additives to increase the ability to form HTCC nanofibers. The additives changed the viscosity …

Life Cycle Assessment Of Biofuels Produced By The New Integrated Hydropyrolysis-Hydroconversion (Ih2) Process, Edwin Maleche

Dissertations, Master's Theses and Master's Reports - Open

Biofuels are alternative fuels that have the promise of reducing reliance on imported fossil fuels and decreasing emission of greenhouse gases from energy consumption. This thesis analyses the environmental impacts focusing on the greenhouse gas (GHG) emissions associated with the production and delivery of biofuel using the new Integrated Hydropyrolysis and Hydroconversion (IH²) process. The IH² process is an innovative process for the conversion of woody biomass into hydrocarbon liquid transportation fuels in the range of gasoline and diesel.

A cradle-to-grave life cycle assessment (LCA) was used to calculate the greenhouse gas emissions associated with diverse feedstocks …

Synthesis Of Pdms-Metal Oxide Hybrid Nanocomposites Using An In Situ Sol-Gel Route, Qiaoyu Lu

Dissertations, Master's Theses and Master's Reports - Open

Organic-inorganic hybrid nanocomposites are widely studied and applied in broad areas because of their ability to combine the flexibility, low density of the organic materials with the hardness, strength, thermal stability, good optical and electronic properties of the inorganic materials. Polydimethylsiloxane (PDMS) due to its excellent elasticity, transparency, and biocompatibility has been extensively employed as the organic host matrix for nanocomposites. For the inorganic component, titanium dioxide and barium titanate are broadly explored as they possess outstanding physical, optical and electronic properties.

In our experiment, PDMS-TiO₂ and PDMS-BaTiO₃ hybrid nanocomposites were fabricated based on in-situ sol-gel technique. By …

Investigation Into The Enhancement Of Polycarbonate With Conductive Nanomaterials, Michael D. Via Jr.

Dissertations, Master's Theses and Master's Reports - Open

Polymers are typically electrically and thermally insulating materials. The electrical and thermal conductivities of polymers can be increased by the addition conductive fillers such as carbons. Once the polymer composites have been made electrically and thermally conductive, they can be used in applications where these conductivities are desired such as electromagnetic shielding and static dissipation.

In this project, three carbon nanomaterials are added to polycarbonate to enhance the electrical and thermal conductivity of the resulting composite. Hyperion Catalysis FIBRILs carbon nanotubes were added to a maximum loading of 8 wt%. Ketjenblack EC-600 JD carbon black was added to a maximum …

Biochemical Conversions Of Lignocellulosic Biomass For Sustainable Fuel-Ethanol Production In The Upper Midwest, Michael James Brodeur-Campbell

Dissertations, Master's Theses and Master's Reports - Open

Biofuels are an increasingly important component of worldwide energy supply. This research aims to understand the pathways and impacts of biofuels production, and to improve these processes to make them more efficient. In Chapter 2, a life cycle assessment (LCA) is presented for cellulosic ethanol production from five potential feedstocks of regional importance to the upper Midwest - hybrid poplar, hybrid willow, switchgrass, diverse prairie grasses, and logging residues - according to the requirements of Renewable Fuel Standard (RFS). Direct land use change emissions are included for the conversion of abandoned agricultural land to feedstock production, and computer models of …

Displacement Of Heavy Oil By Carbon Dioxide In A Tube, Mohammed Almabrouk Ali Ahmad

Masters Theses

"After using primary and secondary oil recovery methods, about two third of the original oil in place is left behind in the reservoir. Enhanced oil recovery (EOR) methods are being used to recover that oil. CO₂ flooding is one of the EOR methods that is used to recover the oil. The interest here lies in recovery of heavy oils. The dissolution of CO₂ in oil reduces oil viscosity and swells it, making it easier to displace the oil. FLUENT is used to solve the problem of CO₂ displacing heavy oil in a tube. Different velocities/capillary numbers (Ca) and …

Development Of A Shared Earth Model To Investigate Potential For Carbon Dioxide Sequestration In The Springfield Area, Mo, Imowo Celestine Akpan

Masters Theses

"Carbon dioxide (C0₂) sequestration has been extensively implemented and explored predominantly in depleted oil reservoirs and deep saline aquifers where the C0₂ is stored under supercritical conditions. A lesser explored option with great potential is based on injection into shallow reservoirs where the C0₂ may not always be in its denser supercritical state. The research evaluates the potential for injecting C0₂ into saline aquifers at depths of ~550-650 meters and formation temperatures of -22⁰C.

To evaluate injectivity and cap rock integrity, reservoir and geomechanical simulations need to be conducted separately and subsequently coupled. A Shared Earth Model is developed utilizing …

Effect Of Lipid Composition On The Physical Properties Of Liposomes: A Light Scattering Study, Rajiv Kumar Yandrapati

Masters Theses

"The aim of this study was to investigate the effect of lipid composition on the physical properties of liposomes. Eight different types of liposomes were prepared for this study. Liposomes consisting of phosphatidylcholine (PC) and cholesterol were prepared in three different compositions 80/20, 50/50 and 20/80 respectively. Similarly liposomes consisting of PC and negatively charged phosphatidylserine (PS) were also prepared in three different compositions 80/20, 50/50 and 20/80 respectively. Two liposomes with the compositions 2:2:1:1 (cholesterol:PC:phosphatidylglycerol (PG): phosphatidylethanolamine (PE) ) which resembles the myelin membrane and 10:5:7.5:16 (PC:PE:PS:cholesterol) which mimics rat's neural membranes were also prepared. The liposomes were prepared …

Hydraulic Fracturing Experiments To Investigate Circulation Losses, Maximiliano Liberman

Masters Theses

"In recent years the oil and gas industry has been drilling more challenging wells due to long deviated wells, drilling through already depleted reservoirs, sub salt wells and increasing water depth. A major challenge these wells create is to prevent fluid loss into the formation and wellbore breakouts by having accurately determined the mud weight operational window. In addition to accurately determine the fracture gradient, additives in the drilling fluid have been used to enhance the fracture gradient in an industry process named wellbore strengthening. In order to study the phenomenon of fracture gradient alteration, a hydraulic fracturing apparatus was …

Investigation Of Geosteering In Non-Trivial Geological Settings, Anuroop Pandey

Masters Theses

"The well placement technology has advanced to a stage where we can explore small tolerance targets such as thin reservoirs. Well placement with geosteering, which is the real time adjustment of the well path based on the geological responses to place and maintain the well within the best part of the reservoir, is the technology that has made this progress possible. Geosteering however can get very complex with the increasing heterogeneities of the formations and there is no fixed methodology to devise a steering strategy in such complex geological settings. To accommodate this challenge, we investigated three methods to verify …

Surfactant Enhanced Oil Recovery By Wettability Alteration In Sandstone Reservoirs, Omar Elmofty

Masters Theses

"Recovering more oil from existing oil reservoirs using enhanced oil recovery methods holds the key for meeting future energy demands. Even though wettability is a cornerstone in oil recovery, few studies have focused on increasing oil recovery in sandstone reservoirs through wettability alteration. The objective of this thesis is to prove that altering the wettability of a sandstone rock to preferentially water-wet condition will reduce the remaining oil saturation and thus increase the percentage of recovered oil.

Two commercial surfactants were selected after studying both the phase behavior and the interfacial properties of 30 surfactants with oil and 1.00% sodium …

Geomechanical Characterization Of Reservoir & Cap Rocks For Co₂ Sequestration, Sudarshan Govindarajan

Masters Theses

"Geological sequestration of CO₂ has been identified as one method to reduce global emissions of CO₂ and achieve lower levels of CO₂ concentrations in the atmosphere. Geological formations have to be assessed in terms of their capacity, sealing capabilities and economic feasibility before CO₂ sequestration can commence. Potential leakage of injected CO₂ from the reservoir formation could occur due to natural or injection induced faults or fractures in the reservoir or sealing formations. As part of a potential leakage investigation a geomechanical characterization which refers to the assessment of the in-situ stress conditions, rock strength and stiffness properties of the …

Protein Based Biomimetic Approachs To Surface Hemocompatibility And Biocompatibility Enhancement, Matthew Thomas Dickerson

Theses and Dissertations--Chemical and Materials Engineering

T. pallidum can survive a primary immune response and continue growing in the host for an extended period of time. T. pallidum is thought to bind serum fibronectin (FN) through Tp0483 on the surface to obscure antigens. A Tp0483 fragment (rTp0483) was adsorbed onto functionalized self-assembled monolayers (SAMs) with FN. FN capture by adsorbed rTp0483 depended greatly on surface chemistry with COO- groups being best for FN binding. Hemocompatibility was determined by analysis of plasma protein adsorption, intrinsic pathway activation, and platelet activation. rTp0483+FN bound an equal or lesser amount of fibrinogen (Fg), human serum albumin (HSA), and factor XII …