Chemical Engineering Commons^™

Surfactant Enhanced Oil Recovery By Wettability Alteration In Sandstone Reservoirs, Omar Elmofty

Masters Theses

"Recovering more oil from existing oil reservoirs using enhanced oil recovery methods holds the key for meeting future energy demands. Even though wettability is a cornerstone in oil recovery, few studies have focused on increasing oil recovery in sandstone reservoirs through wettability alteration. The objective of this thesis is to prove that altering the wettability of a sandstone rock to preferentially water-wet condition will reduce the remaining oil saturation and thus increase the percentage of recovered oil.

Two commercial surfactants were selected after studying both the phase behavior and the interfacial properties of 30 surfactants with oil and 1.00% sodium …

Geomechanical Characterization Of Reservoir & Cap Rocks For Co₂ Sequestration, Sudarshan Govindarajan

Masters Theses

"Geological sequestration of CO₂ has been identified as one method to reduce global emissions of CO₂ and achieve lower levels of CO₂ concentrations in the atmosphere. Geological formations have to be assessed in terms of their capacity, sealing capabilities and economic feasibility before CO₂ sequestration can commence. Potential leakage of injected CO₂ from the reservoir formation could occur due to natural or injection induced faults or fractures in the reservoir or sealing formations. As part of a potential leakage investigation a geomechanical characterization which refers to the assessment of the in-situ stress conditions, rock strength and stiffness properties of the …

Protein Based Biomimetic Approachs To Surface Hemocompatibility And Biocompatibility Enhancement, Matthew Thomas Dickerson

Theses and Dissertations--Chemical and Materials Engineering

T. pallidum can survive a primary immune response and continue growing in the host for an extended period of time. T. pallidum is thought to bind serum fibronectin (FN) through Tp0483 on the surface to obscure antigens. A Tp0483 fragment (rTp0483) was adsorbed onto functionalized self-assembled monolayers (SAMs) with FN. FN capture by adsorbed rTp0483 depended greatly on surface chemistry with COO- groups being best for FN binding. Hemocompatibility was determined by analysis of plasma protein adsorption, intrinsic pathway activation, and platelet activation. rTp0483+FN bound an equal or lesser amount of fibrinogen (Fg), human serum albumin (HSA), and factor XII …

Effect Of Ionic Surfactants On Electrostatic Charging Of Spray Droplets, Mark T. Warren

Theses and Dissertations--Chemical and Materials Engineering

Dust capture for small coal particles (<2.5µm) can be improved if one takes advantage of electrostatic charges that resides on the surface of coal dust particles and on the surface of water spray droplets used to capture coal dust. Traditional dust capture methods that use water sprays are ineffective in capturing small dust particles since the motion of small dust particles is governed by electrostatic forces. If additives such as ionic surfactants could be added to water that would enhance the surface charge on water spray droplets, dust capture with water sprays could be improved.

The results presented show that n-sodium octyl sulfate causes the greatest charge enhancement versus the longer chained n-sodium dodecyl sulfate and n-sodium octadecyl sulfate. This can be explained by considering the factors that lead to droplet charge enhancement. Those factors are the mass of surfactant ions at the droplet surface, and the diffusion rate of the surfactant ions from the bulk droplet to the surface of the droplet. Sodium octyl sulfate will have a faster diffusion rate to the droplet surface because of its relatively short length, and will also maximize the mass …

Nanoparticle Additives For Multiphase Systems: Synthesis, Formulation And Characterization, Vinod Kanniah

Theses and Dissertations--Chemical and Materials Engineering

Study on nanoparticle additives in multiphase systems (liquid, polymer) are of immense interest in developing new product applications. Critical challenges for nanoparticle additives include their synthesis, formulation and characterization. These challenges are addressed in three application areas: nanofluids for engine lubrication, ultrathin nanocomposites for optical devices, and nanoparticle size distribution characterization.

Nanoparticle additives in oligomer mixtures can be used to develop extended temperature range motor oils. A model system includes poly(α-olefin) based oligomers with a modest fraction of poly(dimethylsiloxane) oligomers along with graphite as nanoparticle additive. Partition coefficients of each oligomer are determined since the oligomer mixture phase separated at …

Fabrication Of An Epithelial Cell-Based Ion-Selective Electrode And Its Application For Use As Alternative Tumor Angiogenesis Assay, Christina Nicole Simmons

Theses and Dissertations--Chemical and Materials Engineering

Previous studies have provided evidence that endothelial cell-based potassium ion selective electrodes possess the ability to quantify substances that have permeability-altering effects on those endothelial cells. The capability of these so-called biosensors to detect elevated concentrations of certain chemical agents found following tumor formation make them useful in the application as an alternative tumor angiogenesis assay. In this study an epithelial cell line, human colon adenocarcinoma epithelial cells (Caco-2), was used to fabricate membranes that were used to test concentrations of these chemical agents, known as cytokines, mimicking the concentrations that have been observed in the serum of healthy individuals …

Biodegradable Hydrogels And Nanocomposite Polymers: Synthesis And Characterization For Biomedical Applications, Ashley Marie Hawkins

Theses and Dissertations--Chemical and Materials Engineering

Hydrogels are popular materials for biological applications since they exhibit properties like that of natural soft tissue and have tunable properties. Biodegradable hydrogels provide an added advantage in that they degrade in an aqueous environment thereby avoiding the need for removal after the useful lifetime. In this work, we investigated poly(β-amino ester) (PBAE) biodegradable hydrogel systems. To begin, the factors affecting the macromer synthesis procedure were studied to optimize the reproducibility of the resulting hydrogels made and create new methods of tuning the properties. Hydrogel behavior was then tuned by altering the hydrophilic/hydrophobic balance of the chemicals used in the …

Application Of Thin Film Analysis Techniques And Controlled Reaction Environments To Model And Enhance Biomass Utilization By Cellulolytic Bacteria, Hsin-Fen Li

Theses and Dissertations--Chemical and Materials Engineering

Cellulose from energy crops or agriculture residues can be utilized as a sustainable energy resource to produce biofuels such as ethanol. The process of converting cellulose into solvents and biofuels requires the saccharification of cellulose into soluble, fermentable sugars. However, challenges to cellulosic biofuel production include increasing the activity of cellulose-degrading enzymes (cellulases) and increasing solvent (ethanol) yield while minimizing the co-production of organic acids. This work applies novel surface analysis techniques and fermentation reactor perturbations to quantify, manipulate, and model enzymatic and metabolic processes critical to the efficient production of cellulosic biofuels.

Surface analysis techniques utilizing cellulose thin film …

Membrane Immobilized Reactive Fe/Pd Nanoparticles: Modeling And Tce Degradation Results, Ruo He

Theses and Dissertations--Chemical and Materials Engineering

Detoxification of chlorinated organic compound is an important and urgent issue in water remediation nowadays. Trichloroethylene (TCE), as a model compound in this study, has been proved to be degraded effectively by bimetallic nanoparticles (NPs) in solution phase. In this study, Fe/Pd bimetallic NPs were synthesized in poly (acrylic acid) (PAA) functionalized polyvinylidene fluoride (PVDF) microfiltration membranes. TCE dechlorination with these bimetallic NPs was conducted under different pH values and different metal loadings to study the role of corrosion on reaction rates.

One-dimensional mathematical model with pseudo first-order reaction kinetic was introduced to discuss the TCE dechlorination profile in membrane …

Study Of Characterization Of Submicron Coal Particles Dispersed In Air And Capture Of Coal Particles By Water Drops In A Scrubbing Column, Utshab Chakravorty

Theses and Dissertations--Chemical and Materials Engineering

Present day water spray based dust removal technologies do not effectively remove respirable submicron coal and silica dust particles in the underground coal mines causing Coal worker’s pneumoconiosis (CWP). The objective of this research was to study the electrostatic charges present in the airborne coal dust in order to develop efficient water spraying based dust removal technology where water drops charged using ionic compounds and surfactants would be used to capture the oppositely charged coal particles. In an experimental scrubbing column, coal particles dispersed in an air stream by a Fluidized Bed Aerosol Generator were captured by water drops sprayed …

Oxidation Of Borides And Carbides With Y2o3 And Ta Additions, Salvador Manuel Rodriguez

Open Access Theses & Dissertations

The study presented here describes an investigation of an oxidation scale of a fully-sintered Y2O3-ZrB2-TiC composite exposed in air at 1173K. Upon oxidation of the boride/carbide, a ZrO2-TiO2 was expected to form similar to the ZrO2-SiO2 dual scale of an oxidized ZrB2-SiC. The 47wt% Y2O3-38wt%ZrB2-16wt%TiC composite formed a dual scale consisting primarily of an Y2O3-ZrO2-TiC inner scale with an outer scale of ZrO2-TiO2-Y2O3.

The samples oxidized with a parabolic layer growth allowing the calculation of the effective diffusion coefficient indicating that the oxidation was controlled by oxygen ingress through primarily the ZrO2-Y2O3 phase. The oxygen potential between the inner layer …

Organic Photovoltaics: A Charge Transfer Perspective In The Study Of Donor-Acceptor Pairs, Marco Olguin

Open Access Theses & Dissertations

The present research involves the study of donor-acceptor (D/A) dyad complexes from a charge transfer energy perspective. The aim is to provide insight and predictive understanding into the charge transfer processes of the molecular-level components in donor-acceptor based organic solar cells using computational methods to describe photochemical processes at the quantum mechanical level within the Density Functional Theory (DFT) approximation. Predictive understanding is anchored in reproducing experimental results, wherein the present work a perturbative excited-state DFT method is described in detail and shown to give CT energies in excellent agreement with benchmark experimental data. With an accurate excited state method …

Shape-Shifting Surfaces For Rapid Release And Direct Stamping Of Organized Micro-Tissues, Samuel James Dupont

USF Tampa Graduate Theses and Dissertations

The primary aim of the research in this study is to develop a robust and simple platform for the in vitro organization of cells on surfaces which facilitate rapid cell release and allows for the direct stamping of highly organized micro-tissues. Current approaches towards this goal have been very successful but are lengthy and subject cells to harsh conditions for extended periods of time raising questions regarding cell health and maintenance of physiological state. To address these concerns a platform was developed to allow for rapid cell release by utilizing a release mechanism different from previous work.

Micron-scale structures comprised …

Volume-Phase Transitions In Responsive Photo-Cross-Linked Polymer Network Films, Leena Patra

USF Tampa Graduate Theses and Dissertations

The overall thrust of this project is to gain an insight into a class of surface-tethered cross-linked thin films of poly(N-alkylacrylamides) that display a lower critical solution temperature (LCST).The structure of the alkyl group and the modification of the amide groups determine the LCST and resultant volume-phase transition behavior. The aim of this study involves synthesis and characterization of thin films and to correlate the volume-transition behavior to the structure of the alkyl group. For better understanding the volume-transition behavior, the polymer films are perturbed by the Hofmeister salt series to examine trends between different alkyl groups. While most of …

Lipid Production From A Louisiana Native Chlorella Vulgaris/Leptolyngbya Sp. Co-Culture For Biofuel Applications, Rong Bai

LSU Doctoral Dissertations

Over the last several decades, microalgae have garnered great interest for biofuel production mainly due to the high lipid productivity and minimum land competition with food crops. In this research, a Louisiana native Chlorella vulgaris/Leptolyngbya sp. co-culture was selected for lipid production. The goal of this work is to improve the lipid productivity and lipid composition of this co-culture via optimizing irradiance and nitrogen levels, lipid extraction method and modeling of pilot photobioreactor (HISTAR). Effects of irradiance and nitrate nitrogen levels on total lipid yield, neutral lipid portion, and fatty acid profile of non-aerated and aerated co-cultures were investigated in …

Efficacy Of Multifunctionalized Saccharide Constructs For The Attenuation Of Amyloid-Beta Toxicity, Dhruva Dilip Dhavale

LSU Doctoral Dissertations

There is evidence that amyloid-beta (Aβ) toxicity is mediated through interactions and binding with neuronal surface sialic acids in Alzheimer’s disease (AD). The binding affinity is higher if the sialic acids are clustered and toxicity of Aβ was attenuated by removal of neuronal sialic acids. Thus, interfering with cell membrane-Aβ binding using biomimetics that could reproduce the clustered sialic acid structure could present us with a potential target for therapeutic intervention in AD. Based on this hypothesis, we developed several multifunctionalized sialic acid labeled chitosan compounds of different valency, or number of sialic acid per chitosan molecule, to attenuate Aβ …

A Modeling, Optimization, And Analysis Framework For Designing Multi-Product Lignocellulosic Biorefineries, Paritosh Kumar Sharma

LSU Doctoral Dissertations

The objective of this research is to propose a methodology to develop modular decision analysis frameworks to design value chains for enterprises in the renewable fuels and chemicals sector. The decision support framework focuses on providing strategic decision support to startup and new product ventures. The tasks that are embedded in the framework include process and systems design, technology and product selection, forecasting cost and market variables, designing network capacities, and analysis of risks. The Decision support system (DSS) proposed is based on optimization modeling; systems design are carried out using integer programming with multiple sets of process and network …

Structural And Dynamical Properties Of Liquid And Solid Phases Of Ionic Liquids Confined Inside Nanoporous Materials, Ramesh Singh

LSU Doctoral Dissertations

The purpose of this research is to investigate the physical properties of ionic liquids (ILs) confined inside nanopores of different materials and morphologies. We are interested to study the effect of pore material, morphology and addition of organic solvents on the properties of confined ILs. Understanding the behavior of ILs inside nanopores is relevant to potential applications of these systems in electrochemical double layer capacitors (EDLCs) and dye sensitized solar cells (DSSCs). Such a fundamental understanding is also crucial to optimize the synthesis of hard-templated 1D nanostructures (nanorods, nanotubes, nanowires) based on organic salts, which may be imparted properties (e.g., …

Effect Of Surfactants And Brine Salinity And Composition On Spreading, Wettability And Flow Behavior In Gas-Condensate Reservoirs, Yu Zheng

LSU Doctoral Dissertations

The well-known condensate blockage problem causes severe impairment of gas productivity as the flowing bottom-hole pressure falls below the dew point in gas-condensate reservoirs. Hence, this study attempts to investigate the concept of modifying the spreading coefficient and wettability using low-cost surfactants in the near wellbore region, to prevent the gas flow problems associated with condensate buildup. This study also examines the effect of brine salinity and composition on wettability, spreading and adhesion in condensate buildup regions, to evaluate the ability of brine salinity/composition for enhanced gas productivity in gas-condensate reservoirs. In this study, experiments were performed at both ambient …

Copper-Cobalt Catalysts For Conversion Of Syngas To Ethanol And Higher Alcohols, Miranda Louise Smith

LSU Doctoral Dissertations

Higher alcohols produced by catalytic conversion of synthesis gas are potential octane enhancers for transportation fuels. Copper-cobalt catalysts have emerged as alternatives to the ethanol-selective, but expensive, rhodium-based ones. The reducibility of the catalyst and the CO adsorption mode are important factors in directing the selectivity of CO hydrogenation toward methanol, hydrocarbons, or higher alcohols. In this study, Cu/SiO2, Co/SiO2, and bimetallic CuCo/SiO2 catalysts, as well as their tin-promoted analogues, were synthesized and characterized by TPR, in situ XRD, in situ XANES, and in situ DRIFTS. Cobalt addition to Cu/SiO2 created an amorphous fraction of CuO that was more easily …

Meso-Scale Fluidic Devices With Chemical Sensors For Biological Applications, Satya Gowthami Achanta

Doctoral Dissertations

"Molecular oxygen and humidity are some of the major environmental quantities being measured for various industrial and commercial applications. This dissertation focuses on the design, fabrication and characterization of optofluidic biosensor systems for oxygen and humidity quantification using color charge-coupled device (CCD) camera as a photodetector and LED panel as an excitation source. Meso-scale fluidic devices with integrated oxygen and humidity sensors for potential applications to hydrotropic and oxytropic studies of small plant roots have been investigated in this study. Meso-scale sensor platform was fabricated using porphyrine complex as the sensitive dye embedded within Ethyl Cellulose (EC) polymer matrix. Green …

A Methodology For Statistical Propped Fracture Treatment Design In Fluvial Environments, Prue Elizabeth Smith

Doctoral Dissertations

"Treatment design for hydraulic fracturing historically has been deterministic in nature. In a deterministic design, required variables can be determined and are assumed to be laterally continuous. This is difficult for geologic settings in general, but nearly impossible in fluvial geologic environments where the second assumption is violated.

Recent work has employed statistical methods to account for the complexity and heterogeneity in fluvial environments. Statistical design tools have been used to assist with improving the design process in complex fluvial geologic systems. Currently, the statistical design tools must be created using a "trial and error" process, which requires first completing/fracturing …

Deposition Near Film Cooling Holes On A High Pressure Turbine Vane, Weiguo Ai, Nathan Murray, Thomas H. Fletcher, Spencer Harding, Scott Lewis, Jeffrey P. Bons

Faculty Publications

Deposition on film-cooled turbine components was studied in an accelerated test facility. The accelerated deposition facility seeds a natural-gas burning combustor with finely ground coal ash particulate at 1180 C and 180 m/s (M=0.25). Both cylindrical and shaped holes, with and without thermal barrier coating, were studied over a range of blowing ratios from 0.5 to 4.0. Coolant density ratios were maintained at values from 2.1 to 2.4. Deposition patterns generated with the cylindrical film cooling holes indicated regions of low deposition in the path of the coolant with heightened deposition between film holes. This distinctive pattern was more accentuated …

Synthesis Of Nickel Nanoparticles By Gamma-Radiation And Femtosecond Laser Ablation, Vivek Murlidhar Rao

Masters Theses

"Nickel nanoparticles were synthesized by gamma-radiation and femtosecond laser ablation. Aqueous precursors were prepared by uniformly dispersing nickel chloride in a 2:1 ratio of water and isopropanol. Stabilizers employed were Sodium Dodecyl Sulfate (SDS) and Poly Vinyl Pyrrolidone (PVP). Gamma-ray radiolysis of aqueous nickel precursors was investigated as a reducing agent for nickel cations to form atomic seeds for nucleation on multi-walled carbon nanotubes (MWCNTs). 30-60kGy was the dosage used in increments of 10kGy, at a rate of 10kGy/hr. Isopropanol was added to consume the excess of oxidizing species produced by irradiation and form stable secondary radicals. The influence of …

Global Homotopy Continuation And Stability Analysis: Optimal Application To Chemical Engineering Design, David Anthony Harney

Doctoral Dissertations

"The design of chemical engineering process equipment routinely necessitates the solution of large systems of non-linear equations. The processing speed of standard desktop computers have allowed for equation-oriented process simulators to become commercially viable. For a fully equation-oriented simulator to be competitive with standard iterative solvers, a robust and reliable non-linear equation solver is required and standard Newton methods fail to provide the necessary reliability.

Homotopy continuation methods have been proposed as a way to greatly expand the domain of convergence of the process simulator's equation solving algorithm. This research expands upon existing homotopy continuation algorithms, investigates bounding algorithms, corrector …

Modeling Carbon Sequestration In Transition Zone To Optimize Storage Potential, Fang Yang

Doctoral Dissertations

"Shallow aquifers are potential candidates for carbon sequestration because of their wide distribution and low injection cost. Injected CO₂ in a shallow region segregates into two zones according to CO₂ phases within the initial reservoir pressure and the maximum bottom hole pressure: gas zone and transition zone. Transition zone is a better option because of favorable CO₂ properties. This work investigated the CO₂ storage potential in transition zone using the compositional simulator CMG-GEM and a design of experiment software iSIGHT. First, it addressed the basic characteristics of CO₂ sequestration in transition zone, and then modeled CO₂ injection with simultaneous water …

Glycerin Reformation In High Temperature And Pressure Water, Jason W. Picou

Doctoral Dissertations

"The noncatalytic reformation of glycerin in supercritical water was studied in a Haynes 282 tubular reactor. In order to determine which parameters were the most influential, a 2³ experimental matrix was conducted, with temperatures of 500 and 700⁰C, water/glycerin molar ratios of 3:1 and 13:1, and residence times of 30 and 90 seconds, all at a pressure of 24 MPa. It was found that temperature had the largest effect on the two gasification parameters deemed most important, gasification percentage and hydrogen yield. Based on this, the effect of temperature was further investigated by looking at 5⁰C intervals from 500 to …

Organoclay Dispersion In Linear Low-Density Polyethylene And Maleated Linear Low-Density Polyethylene Via Supercritical Carbon Dioxide Processing, Matthew J. Factor

Doctoral Dissertations

"Research into polymer-clay nanocomposites (PCN's) has been ongoing for decades as a result of the property enhancements offered by clay. To fully exploit these property enhancements, organically modified clays (organoclays) are utilized to promote clay delamination by reducing the disparity between the hydrophilicity of the clay and the hydrophobicity of the highly used polyolefin polymer. Since the organic modification of organoclays can degrade at temperatures typical to many polymers during melt-mix processing, this work utilizes the low-temperature processing fluid supercritical carbon dioxide (scCO₂) to disperse an organoclay into the highly used polymer LLDPE and ascertains the associated processing conditions for …

Updated Eor Screening Criteria And Modeling The Impacts Of Water Salinity Changes On Oil Recovery, Ahmad Aladasani

Doctoral Dissertations

"Developing technologies for enhanced oil recovery (EOR) from existing oil fields would supply the world's energy needs for several decades. The application of EOR in many major oil-producing countries remains in its conceptual stage. Thermal and gas EOR methods achieve high incremental rates; however, their application range has not broadened significantly as they have matured, while the rate at which new, promising EOR methods such as Low-salinity water flooding (LSWF) are being implemented is alarming. Despite, the potential of LSWF its development and application has been hindered by the lack of consensus concerning its recovery mechanism(s). Every oil reservoir has …

Free-Radical Maleation Of Poly(Butylene Adipate-Co-Terephthalate) In Supercritical Carbon Dioxide And Its Effect On The Percolation And Deformation Mechanism Of Layered Silicate Nanocomposites, Alexandria Niemoeller

Doctoral Dissertations

The utilization of compostable polymers such as poly(butylene adipate-co-terephthalate) (PBAT) in single-use packaging applications can mitigate the water, solvents, and energy required for processing plastic waste. PBAT exhibits exceptional elongational properties, but its moderate water vapor permeability and low tensile modulus limit the applications in which PBAT can be employed. In this work, PBAT nanocomposites were produced at various loadings of organically-modified montmorillonite. The secondary structure of nanoparticles formed within the PBAT matrix was evident in the terminal region of the linear viscoelastic response under oscillatory shear, and a percolation threshold was determined to occur at 3.88% clay by weight. …