Chemical Engineering Commons^™

The Effect Of Supercritical Water On Crude Glycerin Solution, Jared Bouquet

Doctoral Dissertations

"Crude glycerin solution, a principal byproduct of the conventional biodiesel process, was reacted in supercritical water using a specially designed Haynesʼ Alloy 282 reactor system for the production of hydrogen rich syngas. The effects of temperature, pressure, water-to-carbon molar ratio, reactor residence time, and glycerin-to-methanol weight ratio on the extent of carbon gasification and gas composition were explored. Based on the results, the extent and selectivity of reactions that concurrently occur when methanol and glycerin are in the presence of supercritical water were analyzed. A decomposition reaction pathway for glycerin conversion to syngas was hypothesized, and then utilizing the results …

Numerical Simulations Of Fracture Propagation And Sealing: Implications For Wellbore Strengthening, Saeed Salehi

Doctoral Dissertations

"To mitigate the small tolerance between pore pressure and fracture gradients an engineering practice referred to as "wellbore strengthening" is conducted to increase the fracture gradient. The method relies on propping and/or sealing the fractures with specially designed materials. Different competing theories exist for physical wellbore strengthening mechanisms which can be categorized into two groups. The first group explains that strengthening happens as a result of increasing wellbore hoop stress when fractures are sealed while the second group emphasis is on fracture tip isolation with suitable materials and enhancing fracture propagation pressure. The numerical models and lab experiments …

Computational Studies Of Ion Transport In Polymer Electrolytes, Hui Wu

Doctoral Dissertations

Improving ionic conductivity and lithium mobility in polymer electrolytes is important for their practical use for battery electrolytes. In this study, a combination of molecular dynamics and Monte Carlo simulations was used to bring insight into lithium ion transport in poly(ethylene oxide) (PEO) with plasticizers and also next to alumina solid surface doped with lithium salt. The simulations were performed using a moderately high molecular weight polymer (Mn = 10,000 g/mol) at an EO:Li ratio of 15. For the plasticized system, the PEO with LiN(CF3SO 2)2 (LiTFSI) was mixed with 10 wt% plasticizers that included either cyclic ethylene carbonate …

Role Of Ammonia In The Activiation Of Methanol Dehydrogenase/Cytochrome C(L) Enzyme, Ancy Kunjumon

Doctoral Dissertations

Recent advancement in enzyme catalysis has opened ways to design efficient biocatalysts, bio-sensors and bio-fuel cells. An in-depth knowledge about the mechanism of the reaction taking place within the enzymes is of great importance to achieve these goals. In this dissertation, various computation methods are applied to investigate the mechanism behind enzyme catalysis in the presence of compounds called activators.

Methanol dehydrogenase (MDH) is a well-known bio-catalyst that can oxidize excess of methanol from the environment to formaldehyde. The enzyme works well within the bacterial environment, but under in vitro, it loses activity. Ammonia is used as an activator …

Investigation Of Microbubble/Droplet Formation In Cross-Flow And Co-Flow Micro Devices, Tom J. John

Doctoral Dissertations

The primary goal of the work presented in this dissertation is to generate microbubbles of a diameter of less than 15μm inside micro channels. In order to achieve this detailed understanding, the facts and limitations behind the generation of microbubbles inside a micro channel are determined from existing literature. The major limitations of the current bubble/droplet generators are found to be the bubble confinement effect, the merging of bubbles, the difficulty in determining bubble diameter and the need for smaller channels to generate smaller bubbles. A device eliminating these drawbacks is conceptualized, and its feasibility is studied using COMSOL® and …

Surface Modification Of Micro-Fluidic Devices, Zhan Gao

Doctoral Dissertations

"The surface modification, fabrication and characterization of microfluidic sensor systems for oxygen and glucose measurements with the use of polymeric materials were investigated in this dissertation. This dissertation is prepared in publication format. The first manuscript focuses on the surface modification of SU -8 layer to enhance the wettability. The improvement of wettability is critical since biofouling can be minimized during bioanalysis. A novel in situ photopattemable grafting technology was used to attach biocompatible polymer layers on SU-8 surface, changing its property from hydrophobicity to hydrophilicity. The results were confirmed by contact angle measurement and Fourier Transform Infrared (FTIR) spectra. …

Biodegradable Polymer/Clay Nanocomposites Based On Poly(Butylene Adipate-Co-Terephthalate) And Polylactide, Mahin Shahlari

Doctoral Dissertations

"In offering a scientifically succinct methodology which leads to property-enhanced biodegradable polymer products for broader application, as well as in promoting the use of bio-sourced renewable polymers such as Polylactide (PLA) in biodegradable polymers with desirable properties from petroleum based polymers such as PBAT, this study and its results both directly and indirectly contribute to the technological solutions that address growing environmental and energy problems caused by the increased use of and reliance upon nondegradable, nonrenewable, petroleum-based plastics. This work studied blends of PBAT and PLA compounded with organoclay through direct melt mixing in a twin-screw extruder and a batch …

Enhanced Heavy Oil Recovery By Alkali-Surfactant In The Pennsylvania Warner Sandstone, Rabia Mohamed Hunky

Doctoral Dissertations

"In this research, a study of the non-thermal method of alkaline-surfactant (AS) flooding to enhance heavy oil recovery from the Pennsylvanian Warner sandstone reservoir in Western Missouri was conducted. This work includ [sic] testing approximately 30 commercial surfactants and using a heavy oil sample with an API of 17. It was found that a number of surfactants could create stable emulsions. The viscosity of heavy oil could be reduced from 18,518 cp to 2.5 cp at 25⁰C through emulsification of certain surfactants. One of the major findings was that the emulsion created by the commercial surfactant, Igepalʼ CO-530 was stable …

Effect Of Hydrophobicity And Surface Roughness On Two-Phase Flow In Rectangular Microchannels, Gautham C. Unni

Doctoral Dissertations

"Two-phase flows in microchannels have received significant attention recently, and have become the cornerstone of numerous microfluidic devices. Microscale devices used for bioengineering applications, oil recovery, and chemical and catalytic microreactor applications involve the transport of bubbles in confined fluidic networks in channels of micrometer length scale. These types of two-phase flows result in pressure variations, leading to an overall increase in pressure drop. Among various flow parameters, pressure drop is extensively used in design of microfluidic devices. There are several parameters that affect the pressure drop across two-phase flow in microchannels. In the present study, the goal is to …

Strength Adjustable Preformed Particle Gels For Conformance Control, Jia Zhou

Doctoral Dissertations

"Reservoir heterogeneity and early water breakthrough (also known as fingering) represent two of the greatest challenges to recover crude oil efficiently. Gel treatments have been implemented as a cost-effective method to plug high permeability zones and thus improve sweep efficiency in reservoirs. However, when extensive cross-flows exist between formation layers, gel treatments become less efficient. Polymer was used in polymer flooding to increase the viscosity of the injected fluids and to correct the fingering problem. However, such treatment may be uneconomical since dramatic viscosity loss (80-90%) is caused by shearing degradation during the injection process near the wellbore.

This research …

Halloysite Clay Nanotubes For Controlled Delivery Of Chemically Active Agents, Elshard Abdullayev

Doctoral Dissertations

In this work we explored the capabilities of halloysite nanotubes as capsules for encapsulation and controlled delivery of the chemically and biologically active substances. Halloysite is a two-layered aluminosilicate which has a predominantly hollow tubular structure in the submicron range and is chemically similar to kaolinite [1, 2].

In the first section of this work, we analyzed the structure of the halloysite nanotubes as well as its capability to encapsulate and deliver biologically and chemically active agents, similarities and differences between release characteristics of different agents and how these differences relate with their chemical structure. Models were used to describe …

Analysis Of Conjugated Polymer Nanotubules Formed By Template Wetting Nanofabrication, Steven D. Bearden Jr.

Doctoral Dissertations

Semiconducting and optoelectric conjugated polymers have potential in micro and nano-electronic applications. Their widely tunable physical conformations and orientations make these polymers ideal material for engineering small scale devices. The polymers have been incorporated into several electronic devices including light-emitting diodes, solar cells, and field-effect transistors. Widespread adoption of these materials will not be a reality until the issues of poor device performance, short lifespans, and device degradation are resolved.

Nanostructures have been demonstrated to have improvements in molecular ordering and electronic transport. In the work presented here, tubular nanostructures of conjugated polymers fabricated by the template wetting nanofabrication process …

Identifying Multiple Steady States In The Design Of Reactive Distillation Processes, Thomas Karl Mills

Doctoral Dissertations

"Global homotopy continuation is used to identify multiple steady states in ideal reactive flash and reactive distillation systems involving a reaction of the form A+B [symbol for <--> C taking place in the liquid phase. The choice of specifications has an influence on the existence of multiple solutions for both the flash and the column. For the flash, specification of the heat input or withdrawal can give rise to multiplicities while specification of the split fraction does not. Specification of one internal energy balance variable and one external material balance variable does not produce multiplicities in the column; however, specification of …

Synthesis And Characterization Of Metal Decorated Bamboo Structured Carbon Nanotubes For Hydrogen Storage, Sean Charles Mickey

Doctoral Dissertations

"Although hydrogen has been considered as a viable alternative fuel, the storage systems used to contain the hydrogen must be improved for large scale use. A variety of conceivable storage options exist ranging from compressed gas, cryogenic liquid, chemical solid state storage, and adsorptive surfaces. Carbon nanotubes (CNTs) provide a potentially viable option for hydrogen storage applications as a high surface area, lightweight media for adsorptive storage, but do not efficiently store hydrogen at ambient temperatures. Metal hydrides, on the other hand, are able to store large weight percents of hydrogen in a chemical solid state, but generally have unfavorable …

The Functionalization Of Single Wall Carbon Nanotubes For Bioapplications, Pu Zhang

Doctoral Dissertations

"In the past few years, the functionalization of carbon nanotubes has received considerable attention due to their extraordinary mechanical, electrical, optical and thermal properties. Using single wall carbon nanotube as a platform in bioanalytical and biomedical applications has also been extensively studied. This dissertation consists of four papers. In the first paper, various methods to functionalize single wall carbon nanotubes with immobilized enzyme for bioanalytical application were investigated. It was found that the covalent functionalization method was not an ideal methodology for enzyme addition neither in terms of enzyme loading amount nor activity retention compared to other methods. Use of …

Protein Responsive Synthetic Materials For Biomedical Applications, Youyou Zheng

Doctoral Dissertations

"The production of synthetic materials with molecular recognition abilities towards biomacromolecules has been widely researched because of its potential applications in separations, sensing, therapeutics, etc. While molecular imprinting has become a commercially viable method for the production of synthetic materials with molecular recognition abilities towards small molecules, little success has been recorded towards protein targets. Proteins are difficult to imprint as they present a number of epitopes for imprinting, are difficult to remove from the completed material, and are incompatible with the densely crosslinked structures required. As a result, a novel surface molecular imprinting technique was developed to synthesize polymeric …

Rational Construction By Molecular Dynamics Modeling And Simulations Of Porous Adsorbent Media For Bioseparation, Enrico Riccardi

Doctoral Dissertations

"Ion-exchange chromatography employing porous adsorbent particles or monoliths in which charged ligands are immobilized onto polymeric extender molecules grafted on the pore surfaces of a base matrix has become a very important method for bioseparations. In this dissertation, a novel fundamental and systematic methodology has been developed that uses the molecular dynamics (MD) modeling and simulation approach to rationally design, construct, and characterize polymeric porous adsorbent media and study the transport and adsorption of a charged biomolecule (desmopressin) in a representative adsorbent medium. The MD results have also been utilized in a macroscopic model to study the large-scale dynamic behavior …

A Simulation Of The Neural Action Potential Under The Influence Of Acetylcholinesterase Inhibitors Modeled In The Neuromuscular Junction, Frank Jenkins

Doctoral Dissertations

The rise of terrorism has created an interest in better ways to detect when humans are exposed to neurotoxins, especially nerve gases developed for military use, most of which are acetylcholinesterase inhibitors. Many current methods of detection are based on mass spectrometry, a method that is cumbersome and not particularly robust when used as an early warning method. The detection of acetylcholinesterase inhibitors would benefit from a combined model of the processes occurring in the neuromuscular junction between the presynaptic action potential and the motor end-plate action potential that includes the kinetics of acetylcholine and acetylcholinesterase in the synaptic cleft. …

Study Of Interaction Between Indium Species And Dna In The Formation Of Dna -Templated Nanowires, Shivashankar Suryanarayanan

Doctoral Dissertations

A primary goal of semiconductor industry is to improve device performance and capability by downscaling feature size and upscaling packaging density. As optical-lithography, the mainstream technology for microfabrication, is being stretched to its limit, new unconventional fabrication techniques are being explored as alternatives. A "Bottom-up" approach for manufacturing is emerging as an answer to limitations posed by the traditional "Top-down" approach. Nanowires, bearing the potential of being the basic building blocks for such an approach, are gaining tremendous attention in nanoelectronics. Metal nanowires fabricated using DNA as templates have potential for precise control of length, diameter and positioning. However, wires …

Design And Development Of Microcantilever As A Platform For Moisture Sensing, Qi Chen

Doctoral Dissertations

Ultra-sensitive and selective moisture sensors are needed in various industries for processing control or environmental monitoring. As an outstanding sensor platform, microcantilevers have potential application in moisture detection due to their advantages, such as low-level moisture detection limits, high accuracy, quick response time, high reproducibility, good recovery rate and low in cost. Our research results will lead to the first of its kind for the commercialization of a microcantilever-based moisture sensor used for industrial and household applications. The novelty of the present work is the development of SiO2 and Si cantilevers, which were fabricated using developed processes and modified with …

Enzymatic Synthesis And Characterization Of Oligopeptides, Co-Oligopeptides And Hydroxy Acid Capped Polypeptides In Mixed Aqueous Organic Media, Santhana Srinivasan

Doctoral Dissertations

"Proteolytic enzymes have been used for the synthesis of homo-oligomers and hydroxy acid capped peptides with amino acids and hydroxy acid esters as substrates in aqueous and aqueous organic biphasic and triphasic systems. However, successful incorporation of hydroxy acids in oligopeptide substrates has not been demonstrated. Use of monophasic media comprising of acetonitrile/water in which oligopeptide substrates were soluble was examined for the synthesis of oligomers of neutral and polar amino acids like Met, Tyr, Lys, Gly, Asp and Glu and tailored co-oligomers of Lys-Met and Arg-Met. Effect of reaction parameters such as starting substrate concentration, system composition, reaction time, …

Investigation Of Ethanol Dehydration In A Microscale Pervaporation Process, Sudhir Ramprasad

Doctoral Dissertations

Challenges due to surface tension effects for vaporization in microchannels have restricted the implementation of conventional separation processes that involve liquid boiling in a micro-chemical system. However, membrane separations offer a feasible alternative for exploring the advantages of liquid phase separation in micro-chemical systems. The main objective of this research was to evaluate the process intensification effects in a microscale pervaporation process with experiments involving the separation of ethanol/water using a commercially available polymer dehydration membrane.

The microchannels in the microseparator were fabricated by the dry etch process at Louisiana Tech University. Microchannel depths of 20 to 120 μm, with …

Development Of Palladium Nanowires, Chuanding Cheng

Doctoral Dissertations

Inherent limitations of traditional lithography have prompted the search for means of achieving self-assembly of nano-scale structures and networks for the next generation of electronic and photonic devices. The nanowire, the basic building block of a nanocircuit, has recently become the focus of intense research. Reports on nanowire synthesis and assembly have appeared in the scientific literature, which include Vapor-Liquid-Solid mechanism, template-based electrochemical fabrication, solvothermal or wet chemistry, and assembly by fluid alignment or microchannel networks. An ideal approach for practical application of nanowires would circumvent technical and economic constraints of templating. Here we report on the self-assembly of highly-ordered …

Development Of A Novel Microreactor For Improved Chemical Reaction Conversion, Yu Liang

Doctoral Dissertations

Microreactors have been widely studied over the past two decades for different chemical reactions, to develop new analytical capabilities, and to obtain high mixing performance in the reactors. The main objectives of this work are to investigate the effect of different microchannel structures on the fluid properties and mixing behavior in microreactors, and to design, fabricate, and test a novel microreactor for higher conversion in a chemical reaction. The development of this novel microreactor is intended to provide a valuable guideline in achieving enhanced chemical mixing and to make available a solid research base for optimization of the yield of …

Layer-By-Layer Nanoassembly Combined With Microfabrication Techniques For Microelectronics And Microelectromechanical Systems, Jingshi Shi

Doctoral Dissertations

The objective of this work is to investigate the combination of layer-by-layer self-assembly with microfabrication technology and its applications in microelectronics and MEMS.

One can assemble, on a standard silicon wafer, needed multilayers containing different nanoparticles and polymers and then apply various micromanufacturing techniques to form microdevices with nanostructured elements.

Alternate layer-by-layer self-assembly of linear polyions and colloidal silica at elevated temperatures have been firstly studied by QCM and SEM. LbL self-assembly and photolithography were combined to fabricate an indium resistor. The RTA method was employed in the fabrication. Hot-embossing technique as a reasonably fast and moderately expensive technique was …

Biomimetic Synthesis Within Polyelectrolyte Microcapsules: Characterization Of Enzyme Catalyzed Polyphenols And Polypeptides, Rohit C. Ghan

Doctoral Dissertations

An enzyme-catalyzed synthesis of novel polymers within layer-by-layer (LbL) constructed polyelectrolyte microcapsules has been developed. This approach is based on the selective permeability of polyelectrolyte-capsule walls to monomer molecules. Conversely biocatalysts and forming polymeric chains cannot exit the micro-capsule interior because of their characteristic high molecular weight. Horseradish Peroxidase (HRP) was encapsulated into four bilayer PSS (poly-styrenesulfonate)/PAH (poly-allylamine hydrochloride) capsules with an average diameter of 5 μm using pH-driven pore opening. The polymerization of 4-(2-Aminoethyl) phenol hydrochloride (tyramine) catalyzed by HRP produces easily detectable fluorescent polymeric products after the addition of hydrogen peroxide to the system. It is known that …

Silicon Based Micro Components For Use In Chemical Agent Detection, Scott R. Forrest

Doctoral Dissertations

The objective of this work was to model, fabricate and test silicon based micro components for applications in chemical agent detection. Part I deals with research done on tunable micro Fabry-Perot interferometers. These devices are designed for use in identifying chemicals that absorb radiation in the infrared range of the spectrum. Part II deals with research done on novel Layer by Layer (LbL) assembled enzyme microreactors. These devices are designed for use in identifying chemicals that absorb radiation in the ultraviolet and visible range of the spectrum.

The emphasis of Part I is on the design and modeling of Fabry-Perot …

Fatigue Of Drill Pipes Used In Horizontal Directional Drilling, Feibai Ma

Doctoral Dissertations

Fatigue is the most common cause of mini-HDD drill rod failure. It can occur at stress levels far below the normal operating stress in most drill stem components. Fatigue failures occur because the drill rod, after it has been forced into a curved path, undergoes a cyclic bending stress oscillating from tension to compression in concert with the other stress components caused by torque, thrust, or pullback.

When a rod breaks underground, there is considerable extra cost caused by the delay in “fishing” out the broken rod as well as the cost of replacing the rod. On the other hand, …

Microreactor System With Immobilized Enzyme On Polydimethylsiloxane (Pdms) Polymers, Zonghuan Lu

Doctoral Dissertations

Microsystems, specifically microreactors, open the gate to new, improved analytical techniques while offering many advantages for a large number of applications in chemical engineering, pharmacy, medicine, and biotechnology. This study explored the feasibility of fabrication of microreactors using polydimethylsiloxane (PDMS) as a support for enzyme immobilization. Urease enzyme was used for catalyzing the conversion of urea to ammonia.

PDMS (polydimethylsiloxane) is a silicone-based elastomeric polymer. Traditional micromanufacturing technology was employed for reactor mold fabrication. The mold was fabricated based on photolithography techniques, and SU-8 photoresist was used to construct reactor structure templates. The resulting silicon-wafer based reactor molds were then …

Modeling And Experimental Verification Of Growth Of An Axisymmetric Cylindrical Rod By Three-Dimensional Laser-Induced Chemical Vapor Deposition, Qing Chen

Doctoral Dissertations

Three-dimensional laser-induced chemical vapor deposition (3D-LCVD) is a recently developed micro-manufacturing process that holds great potential for the production of complex microstructures with high aspect ratio. A laser beam is focused through a vacuum chamber window onto a movable substrate. The heat from the laser at or near the focal spot on the substrate induces the decomposition reaction of precursor gas in the chamber. As a result, solid-phase reaction products are deposited on the substrate to form the microstructure. In this dissertation, a numerical model is developed for simulating kinetically-limited growth of an axisymmetric cylindrical rod by pre-specifying the surface …