Open Access. Powered by Scholars. Published by Universities.®
Articles 631 - 656 of 656
Full-Text Articles in Chemical Engineering
Effect Of Particle Size Of Silica And Sio2/Mao Ratios On Heterogeneous Metallocene Catalyst Performance And Polyethylene Properties, Chalermpong Ramrauytham
Effect Of Particle Size Of Silica And Sio2/Mao Ratios On Heterogeneous Metallocene Catalyst Performance And Polyethylene Properties, Chalermpong Ramrauytham
Chulalongkorn University Theses and Dissertations (Chula ETD)
The metallocene catalyst is one of the catalysts, used to produce polyethylene having narrow molecular weight distribution. So, the metallocene catalyst has been interesting in many researches. To activate metallocene catalyst in ethylene polymerization, methylaluminoxane has been used as cocatalyst because it makes high activity for metallocene catalyst. However, both of them are in solution form, which make fouling in reactor and not good morphology in slurry ethylene polymerization. This problem has been solved by heterogeneous metallocene catalyst. Silica is widely used for heterogeneous metallocene catalyst because of high surface area and good morphology. This research is aimed to study …
The Effect Of Methylaluminoxane Synthesis Conditions By Non-Hydrolysis Route To Ethylene Polymerization On Supported Metallocene Catalyst, Tareeya Chansaard
The Effect Of Methylaluminoxane Synthesis Conditions By Non-Hydrolysis Route To Ethylene Polymerization On Supported Metallocene Catalyst, Tareeya Chansaard
Chulalongkorn University Theses and Dissertations (Chula ETD)
In this study, the synthesis conditions of methylaluminoxane by non-hydrolysis route were investigated. Effect of these parameters on the formation of methylaluminoxane which was used for the efficient activator for metallocene catalyst in ethylene polymerization, was focused. Benzoic acid and TMA were used as the reactants in this route. In the first part, the various TMA:BA ratios were investigated. It was found that TMA:BA= 2.4 was the suitable ratio to form MAO, which had the highest conversion of initial TMA and high activity. In the second part, the holding time of reaction was studied to improve the formation of MAO …
Synthesis Of Copper (Core) - Tin (Shell) Nanoparticles By Modified Polyol Process And Replacement Reaction, Bongkot Sakunchangsanoh
Synthesis Of Copper (Core) - Tin (Shell) Nanoparticles By Modified Polyol Process And Replacement Reaction, Bongkot Sakunchangsanoh
Chulalongkorn University Theses and Dissertations (Chula ETD)
This research aimed to prevent the oxidation of copper nanoparticles by protecting them with tin as a core-shell structure. Copper (core) nanoparticles were synthesized though modified polyol process and tin (shell) was synthesized though replacement reaction by using glycerol as polyol liquid, sodium phosphinate monohydrate as a reducing agent and thiourea as a surfactant. The effects of sodium phosphinate monohydrate concentration, thiourea concentration and copper ion to tin ion ratio were investigated. The synthesized-nanoparticles were characterized by transmission electron microscopy (TEM), X-ray diffraction techniques (XRD), energy dispersive X-ray spectrometer (EDX), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) and differential scanning …
Effect Of Modified Tungsten Based Metathesis Catalysts By Ion Exchange Method With Alkali Metal Group 1a Solutions, Kritsada Pipitthapan
Effect Of Modified Tungsten Based Metathesis Catalysts By Ion Exchange Method With Alkali Metal Group 1a Solutions, Kritsada Pipitthapan
Chulalongkorn University Theses and Dissertations (Chula ETD)
The effect of sodium hydroxide and potassium hydroxide solutions in ion exchange with the WO3/SiO2 catalysts was investigated in the metathesis of trans-2-butene and ethylene for propylene production. The concentrations of alkali solutions used ion exchange were vaired from 0 to 6.75 mmol/L. The results suggested that the active center precursors of the metathesis were diminished at high concentrations of alkali solutions (>2.25 mmol/L). On the other hand at the low concentrations (
Impact Of Hydrotalcite Co-Catalyst On Metathesis Of Ethylene And2-Butene Over Silica-Zeolite Supported Tungsten Catalysts, Kriangkrai Aranyarat
Impact Of Hydrotalcite Co-Catalyst On Metathesis Of Ethylene And2-Butene Over Silica-Zeolite Supported Tungsten Catalysts, Kriangkrai Aranyarat
Chulalongkorn University Theses and Dissertations (Chula ETD)
Silica-zeolite supported tungsten oxide catalysts were physically mixed with hydrotalcite synthesized by co-precipitation method and investigated in the metathesis reaction of ethylene and trans-2-butene for propylene production. In this work, the effects of transition metal (a, b, c) doping on the hydrotalcite catalysts and N2-pretreatment on the catalytic properties of hydrotalcite mixed WO3-based catalysts were studied. The use of b-doped hydrotalcite with b/Mg-Al ratio 0.18 mixed with the WO3-based catalysts was found to increase the metathesis activity due to the higher amount of tungsten active species formed on the WO3-based catalysts and the higher isomerization activity of the b-doped hydrotalcite. …
Copper-Silver Conductive Film By Spray Pyrolysis Of Copper-Silver Amine Complexes, Walailuk Limkitnuwat
Copper-Silver Conductive Film By Spray Pyrolysis Of Copper-Silver Amine Complexes, Walailuk Limkitnuwat
Chulalongkorn University Theses and Dissertations (Chula ETD)
Copper-silver conductive films were fabricated on glass and polyimide substrates by spray pyrolysis of copper-silver amine complex ink in nitrogen atmosphere. The conductive ink was synthesized by mixing of copper (II) acetate monohydrate, silver oxide, ammonia solution, diethanolamine and distilled water. The effects of molar ratio of copper to silver, spray pyrolysis temperature, sintering time and substrate used were studied. The conductive films obtained contained copper and silver nanoparticles. However, copper-silver alloy particles were not observed. Molar ratio of copper to silver affected copper and silver crystallite sizes. The particle packing density synthesized at 200 oC was more compact than …
การควบคุมทำนายแบบจำลองของเครื่องปฏิกรณ์แบบเบดนิ่งสำหรับปฏิกิริยาออกซิเดชันของเมทานอลบนตัวเร่งปฏิกิริยาที่เป็นโลหะเงิน, สุกัลญา อารียะ
การควบคุมทำนายแบบจำลองของเครื่องปฏิกรณ์แบบเบดนิ่งสำหรับปฏิกิริยาออกซิเดชันของเมทานอลบนตัวเร่งปฏิกิริยาที่เป็นโลหะเงิน, สุกัลญา อารียะ
Chulalongkorn University Theses and Dissertations (Chula ETD)
การควบคุมทำนายแบบจำลองไม่เชิงเส้นใช้ในการควบคุมอุณหภูมิของสารขาออกจากปฏิกรณ์แบบเบดนิ่งสำหรับกระบวนการสังเคราะห์ฟอร์มาลดีไฮด์จากปฏิกิริยาออกซิเดชันของเมทานอลและออกซิเจนบนตัวเร่งปฏิกิริยาที่เป็นโลหะเงินภายใต้ความดันบรรยากาศ แบบจำลองเชิงพลวัตถูกสร้างขึ้นบนสมมติฐานที่มีการไหลเป็นแบบท่อไหลหนึ่งมิติ สถานะของสารทั้งสองเสมือนเนื้อเดียวกัน แบบจำลองที่ได้จึงมีลักษณะเป็นสมการเชิงอนุพันธ์ย่อยไฮเพอร์โบลิก การหาผลเฉลยของแบบจำลองใช้ระเบียบวิธีแครงค์นิโคลสันซึ่งเป็นระเบียบวิธีที่เเม่นยำที่สุดเมื่อเทียบกับระเบียบวิธีอื่นๆในระเบียบวิธีการผลต่างอันตะ เเบบจำลองสามารถจำลองกระบวนการได้ดีในช่วงอุณหภูมิ 448-923 เคลวิน ซึ่งเป็นช่วงที่เกิดปฏิกิริยาออกซิเดชันของเมทานอลและฟอร์มาลดีไฮด์ การควบคุมทำนายแบบจำลองที่มีตัวแปรปรับคือ อุณหภูมิของไอน้ำที่เข้าสู่แจ็กเก็ต สามารถควบคุมตัวแปรควบคุมคือ อุณหภูมิของสารขาออกจากปฏิกรณ์ ให้อยู่ที่ค่าเป้าหมายตลอดระยะเวลาการดำเนินการ การควบคุมทำนายแบบจำลองสามารถควบคุมอุณหภูมิของสารขาออกจากปฏิกรณ์ได้อย่างมีประสิทธิภาพเมื่อเทียบกับการควบคุมพีไอดี แต่การควบคุมทำนายแบบจำลองโดยปราศจากการประมาณค่าสเตตและพารามิเตอร์มีสมรรถนะต่ำ
Synthesis Of Cu-Zn Alloy Nanoparticles By Microwave–Assisted Polyol Process, Pornpun Arundechachai
Synthesis Of Cu-Zn Alloy Nanoparticles By Microwave–Assisted Polyol Process, Pornpun Arundechachai
Chulalongkorn University Theses and Dissertations (Chula ETD)
In this research, copper-zinc alloy nanoparticles were synthesized through the microwave-assisted polyol co-reduction process in ethylene glycol. The effects of molar ratio of copper to zinc ratio, sodium hydroxide to metal ratio and method of adding ascorbic acid were studied. The particles size, microstructure and morphology of nanoparticles obtained were characterized by XRD, SEM and TEM. The particles obtained synthesized at copper to zinc at 90:10, sodium hydroxide to metal ratio at 5:1 and dropping ascorbic acid at room temperature. The results confirmed the formation of copper-zinc alloy with diameters of particles in range of 20-50 nm. The conductive ink …
Study Of The Cracking Reaction In Ethylene Reactant, Atchariya Anantapanyasut
Study Of The Cracking Reaction In Ethylene Reactant, Atchariya Anantapanyasut
Chulalongkorn University Theses and Dissertations (Chula ETD)
In this thesis, the main objectives were to study the cracking of ethylene, comparing between thermal cracking and catalytic cracking reactions. The ethylene and nitrogen which atomic ratio 1:1 were used as reactant feed on Al2O3, zeolite-Y and silica-supported tungsten catalysts at 723 K and 25 atm. The inert SiO2 was used to represent the thermal cracking. The catalysts were characterized by NH3-TPD. The product distribution was clearly different between the thermal cracking and catalytic cracking. Thermal cracking produced the olefin products while catalytic cracking produced paraffin products.
Effect Of Aluminosilicate Type In The Physically Mixed Support On Wox/Sio2-Aluminosilicate Catalyst For Metathesis Of Ethylene And 2-Butene, Kittayanee Suwanthorn
Effect Of Aluminosilicate Type In The Physically Mixed Support On Wox/Sio2-Aluminosilicate Catalyst For Metathesis Of Ethylene And 2-Butene, Kittayanee Suwanthorn
Chulalongkorn University Theses and Dissertations (Chula ETD)
Silica supported tungsten catalysts were physically mixed with different acidic material types (similar particle size ≈ 53-106 µm) as an extra support and compared with the case as bi-support. All catalysts were tested in the metathesis reaction of ethylene and trans-2-butene to propylene and characterized by XRD, NH3-TPD, FTIR-pyridine, UV-vis, Raman, SEM-EDX, TPR and TPO, systematically comparing with reference catalyst, which were physically mixed with SiO2 as the extra support. Adding acidic material resulted in an increased total acidity of the catalysts. Moreover, it could improve the WOx dispersion on the surface and increase the active site precursors. These led …
การพัฒนาฟิล์มที่มีการจัดเรียงตัวสองทิศทางจากพลาสติกชีวภาพพอลิแลคติกแอซิดที่เพิ่มความเหนียวด้วยอนุภาคยางนาโนเพื่อประยุกต์ใช้เป็นบรรจุภัณฑ์, ลลิลทิพย์ บุญธรรมจินดา
การพัฒนาฟิล์มที่มีการจัดเรียงตัวสองทิศทางจากพลาสติกชีวภาพพอลิแลคติกแอซิดที่เพิ่มความเหนียวด้วยอนุภาคยางนาโนเพื่อประยุกต์ใช้เป็นบรรจุภัณฑ์, ลลิลทิพย์ บุญธรรมจินดา
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้มุ่งพัฒนาฟิล์มพอลิแลคติกแอซิด (PLA) ที่จัดเรียงตัวสองทิศทาง โดยศึกษาอิทธิพลของตัวแปรสภาวะการดึงยืดสองทิศทาง ได้แก่ อุณหภูมิที่ใช้ในการดึงยืด อัตราส่วนการดึง และการอบอ่อน PLA ถูกเพิ่มความเหนียวด้วยอนุภาคยางคอร์เชลล์ (CSR) ปริมาณ 0-10 %wt ขึ้นรูปเป็นฟิล์มและแผ่นด้วยการอัดรีด ดึงยืดสองทิศทางพร้อมกันที่อุณหภูมิดึงยืด 75, 80 และ 85°C อัตราส่วนการดึง 3x3, 3.5x3.5 และ 4x4 และการอบอ่อน ผลวิเคราะห์ระดับความเป็นผลึกด้วยหลักการวิเคราะห์การเปลี่ยนแปลงพลังงาน พบว่าฟิล์มที่ไม่ดึงยืดมีระดับความเป็นผลึกเพียง 1-3% ส่วนฟิล์มที่ผ่านการดึงยืดสองทิศทางมีระดับความเป็นผลึกสูงราว 22-30% การทดสอบภายใต้แรงดึง พบว่าทั้งฟิล์มที่ไม่ดึงและที่ดึงสองทิศทางต่างมีมอดูลัสแรงดึงใกล้เคียงกัน คือ ประมาณ 3 GPa ฟิล์มที่ดึงสองทิศทางทนแรงดึงได้สูงขึ้นเนื่องจากมีระดับความเป็นผลึกสูงขึ้น และสายโซ่ PLA จัดเรียงเป็นระเบียบมากขึ้น การใส่ยางเพิ่มขึ้นส่งผลให้ความเค้น ณ จุดครากของฟิล์ม PLA/CSR ลดลงจาก 70 MPa ในฟิล์ม PLA 3x3 80°C A เป็น 50 MPa ในฟิล์ม PLA/CSR 10 wt% 3x3 80°C A ส่วนระยะยืด ณ จุดขาดของฟิล์มที่ดึงยืดสองทิศทางก็เพิ่มขึ้นตามปริมาณอนุภาคยาง โดยยืดได้มากที่สุดเมื่อใส่ยาง CSR 7 wt% ฟิล์ม PLA 3.5x3.5 80°C A มีระยะยืด ณ จุดขาด 71% แต่ฟิล์ม PLA/CSR 7 wt% 3.5x3.5 80°C A ยืดได้สูงถึง 127% การเพิ่มอุณหภูมิดึงยืด และการอบอ่อนส่งผลให้ระยะยืด ณ จุดขาดของทั้งฟิล์ม PLA และ ฟิล์ม PLA/CSR เพิ่มขึ้น ฟิล์มต้านทานแรงฉีกเพิ่มขึ้นเมื่อเพิ่มปริมาณอนุภาคยาง โดยสามารถทนแรงฉีกสูงสุดเมื่อเติม 5 …
การปรับปรุงร้อยละการสกัดในเวลาน้อยที่สุดของไอออนแพลเลเดียมและดีบุกผ่านเยื่อแผ่นเหลวที่พยุงด้วยเส้นใยกลวงโดยตัวควบคุมแบบโมเดลพรีดิกทีฟ, นาตยา ลายเสือ
การปรับปรุงร้อยละการสกัดในเวลาน้อยที่สุดของไอออนแพลเลเดียมและดีบุกผ่านเยื่อแผ่นเหลวที่พยุงด้วยเส้นใยกลวงโดยตัวควบคุมแบบโมเดลพรีดิกทีฟ, นาตยา ลายเสือ
Chulalongkorn University Theses and Dissertations (Chula ETD)
กระบวนการสกัดไอออนแพลเลเดียมและดีบุกผ่านเยื่อแผ่นเหลวที่พยุงด้วยเส้นใยกลวง เป็นกระบวนการหนึ่งที่ใช้สกัดไอออนโลหะออกจากสารละลายโดยเฉพาะอย่างยิ่งสารละลายที่มีความเข้มข้นต่ำๆ ทั้งนี้ยังสามารถสกัดและนำกลับไอออนโลหะแพลเลเดียมและดีบุกได้ในขั้นตอนเดียว จึงทำให้กระบวนการสกัดผ่านเยื่อแผ่นเหลวที่พยุงด้วยเส้นใยกลวงเป็นที่นิยมมากกว่าวิธีอื่น งานวิจัยนี้ศึกษาแบบจำลองทางคณิตศาสตร์ของกระบวนการสกัดไอออนแพลเลเดียมและดีบุกผ่านเยื่อแผ่นเหลวที่พยุงด้วยเส้นใยกลวง โดยควบคุมค่าความเข้มข้นของไอออนแพลเลเดียมและดีบุกโดยตัวควบคุมแบบโมเดลพรีดิกทีฟและตัวควบคุมแบบพีไอดี พบว่าแบบจำลองทางคณิตศาสตร์ของกระบวนการสกัดของไอออนแพลเลเดียมและดีบุกสามารถใช้ทำนายพฤติกรรมความสัมพันธ์ของตัวแปรต่างๆในระบบได้เป็นอย่างดี โดยมีค่ากำลังสองน้อยที่สุดของไอออนแพลเลเดียมและดีบุกอยู่ที่ 6.67 และ 11.41 และมีค่าร้อยละการสกัดของไอออนแพลเลเดียม 97.53 และค่าร้อยละการสกัดของไอออนดีบุก 25.43 ผลการควบคุมแสดงให้เห็นว่าตัวควบคุมแบบพีไอดีและตัวควบคุมแบบโมเดลพรีดิกทีฟสามารถควบคุมความเข้มข้นของไอออนแพลเลเดียมและดีบุกได้ดี และในกรณีที่ค่าพารามิเตอร์ของกระบวนการเกิดความคลาดเคลื่อนตัวควบคุมแบบโมเดลพรีดิกทีฟมีสมรรถนะทีดีกว่าตัวควบคุมแบบพีไอดีโดยพิจารณาจากค่าดัชนีชี้วัดไอเออี
Study And Analysis Of Electrolyte Imbalance In A Vanadium Redox Flow Battery, Kittima Ngamsai
Study And Analysis Of Electrolyte Imbalance In A Vanadium Redox Flow Battery, Kittima Ngamsai
Chulalongkorn University Theses and Dissertations (Chula ETD)
Electrolyte imbalance which is an important problem for long-term operation of a vanadium redox flow battery (VRB) is studied and analyzed in this research. A cause of the electrolyte imbalance is firstly studied. The air oxidation of vanadium (V(II)) which is the side reaction in an electrolyte reservoir is investigated. The effects of the ratio of the electrolyte volume to air-electrolyte solution interface area and the ingredients of electrolyte solution on the rate of air oxidation of V(II) are investigated. The results show that the high ratio of the electrolyte volume to air-electrolyte solution interface area can retard the oxidation …
Effect Of Citric Acid On Hydrodesulfurization Activity Of Dibenzothiophene And 4,6 Dimethyldibenzothiophene Over Como Catalyst On Al2o3-Zro2 Support, Pawinee Sintarako
Effect Of Citric Acid On Hydrodesulfurization Activity Of Dibenzothiophene And 4,6 Dimethyldibenzothiophene Over Como Catalyst On Al2o3-Zro2 Support, Pawinee Sintarako
Chulalongkorn University Theses and Dissertations (Chula ETD)
The effect of citric acid on the HDS activity of DBT and 4,6 DMDBT on CoMo/γ-Al2O3-ZrO2 catalysts has been investigated. It has been found that the CoMo/γ-Al2O3-ZrO2 physically mixed with 10wt.% of ZrO2 shows the highest HDS conversion of DBT in the presence of pyridine. The addition of ZrO2 as a secondary support obviously suppresses the influence of pyridine on HDS activity of DBT over CoMo/γ-Al2O3 based catalyst. The synergistic benefits of ZrO2 and citric acid on HDS activity of DBT and 4,6 DMDBT over CoMo/γ-Al2O3 catalyst are not found. The modification of CoMo/γ-Al2O3 catalyst by citric acid can inhibit …
Modification Of W/Sio₂ Catalysts By Second Metal For Metathesis Of Ethylene And 2-Butene, Narongrat Poovarawan
Modification Of W/Sio₂ Catalysts By Second Metal For Metathesis Of Ethylene And 2-Butene, Narongrat Poovarawan
Chulalongkorn University Theses and Dissertations (Chula ETD)
In this thesis, the main goals were to study the effect of the dispersion of the tungsten active phase and the modification of WO3/SiO2 catalyst by a second metal for metathesis reaction of the mixture of cis/trans-2-butene and ethylene. The silica supported tungsten catalyst was used as the base catalyst and lanthanum, cerium, yttrium were used as the second metal in this study. It was found that the dispersion of the tungsten active phase would affect the catalytic performance of the WO3/SiO2 catalyst, when the mixture of cis/tran-2-butene was use as feed.The second metal was used to midify the dispersion …
การควบคุมแบบโมเดลพรีดิกทีฟในการสกัดแบบเสริมฤทธิ์ของไอออนนีโอดิเมียมด้วยเยื่อแผ่นเหลวที่พยุงด้วยเส้นใยกลวง, วรรษมนต์ คอนเอม
การควบคุมแบบโมเดลพรีดิกทีฟในการสกัดแบบเสริมฤทธิ์ของไอออนนีโอดิเมียมด้วยเยื่อแผ่นเหลวที่พยุงด้วยเส้นใยกลวง, วรรษมนต์ คอนเอม
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้นำเสนอการประยุกต์ใช้การควบคุมแบบโมเดลพรีดิกทีฟโดยเปรียบเทียบกับการควบคุมแบบพีไอดีสำหรับการควบคุมความเข้มข้นของไอออนนีโอดิเมียมในการสกัดแบบเสริมฤทธิ์ผ่านเยื่อแผ่นเหลวที่พยุงด้วยเส้นใยกลวงเพื่อควบคุมความเข้มข้นของไอออนนีโอดิเมียมขณะออกจากมอดูลของเส้นใยกลวงให้เข้าสู่ค่าเป้าหมาย โดยอาศัยค่าไอเอดีเป็นดัชนีชี้วัด ระบบที่ศึกษาคือ การสกัดไอออนนีโอดิเมียมในสารละลายกรดไนตริก สารสกัดคือ D2EHPA และ TOPO ผสมกันในอัตราส่วน 1:1 สารละลายนำกลับคือกรดซัลฟิวริกความเข้มข้น 1 โมลต่อลิตร รูปแบบการไหลผ่านมอดูลเส้นใยกลวงแบบไหลผ่านครั้งเดียวและสารละลายป้อนไหลสวนทางกับสารละลายนำกลับ และศึกษาสมรรถนะของตัวควบคุมทั้งสองแบบ เมื่อมีความคลาดเคลื่อนระหว่างแบบจำลองกับกระบวนการจริง ที่สภาวะปกติผลการจำลองแสดงให้เห็นว่า ตัวควบคุมทั้งแบบพีไอดีและโมเดลพรีดิกทีฟสามารถควบคุมความเข้มข้นของไอออนนีโอดิเมียมให้เข้าสู่ค่าเป้าหมายได้เร็วกว่ากระบวนการที่ไม่ใช้ตัวควบคุม โดยตัวควบคุมแบบโมเดลพรีดิกทีฟสามารถควบคุมความเข้มข้นของไอออนนีโอดิเมียมให้เข้าสู่ค่าเป้าหมายได้เร็วกว่าตัวควบคุมแบบพีไอดี และเมื่อแบบจำลองมีความคลาดเคลื่อนไปจากกระบวนการจริง ตัวควบคุมทั้งสองแบบสามารถควบคุมความเข้มข้นให้เข้าสู่ค่าเป้าหมายได้ โดยตัวควบคุมแบบโมเดลพรีดิกทีฟให้สมรรถนะที่ดีกว่าการควบคุมแบบพีไอดีทั้งกรณีที่แบบจำลองมีความถูกต้องและแบบจำลองมีความคลาดเคลื่อนไปจากกระบวนการจริง
Suitable Catalyst Bed Arrangement Of Silica-Based Supported Tungstenand Hydrotalcite Catalysts For Propylene Production From 1-Butene, Sirada Sripinun
Suitable Catalyst Bed Arrangement Of Silica-Based Supported Tungstenand Hydrotalcite Catalysts For Propylene Production From 1-Butene, Sirada Sripinun
Chulalongkorn University Theses and Dissertations (Chula ETD)
The research studied the design of suitable catalyst beds of hydrotalcite and the modified silica supported tungsten for propylene production from 1-butene. The study started with performing reactions at various values of gas hourly space velocity, feed composition and temperature. Then the reaction rate expressions for each catalyst were determined. It was found that the models could predict well the experimental results. The models were further used to simulate the reaction performance of reactors packed with different catalyst beds. The performance was shown in terms of molar flow rate of propylene and yield of propylene. The performance of the catalyst …
Simulation Of Temperature Distribution In A Thermal Drying Oven Based On Three Dimensional Cfd Model, Patsarawan Lipikanjanakul
Simulation Of Temperature Distribution In A Thermal Drying Oven Based On Three Dimensional Cfd Model, Patsarawan Lipikanjanakul
Chulalongkorn University Theses and Dissertations (Chula ETD)
This research presents a study of air velocity in a thermal drying oven in drying zone. To reduce a heat loss, a mass flow rates are decreased from 100% to 10%. The effect of the mass flow rate can be divided into three parts; air velocity, air temperature, and concentration of solvent. A three-dimensional CFD with a non-isothermal model and a transport of diluted species were simulated by using COMSOL. For ensuring the result, all results are compared with MATLAB program by focusing in two-direction (length-height). The parameters of air velocity that uses in this program is the results of …
การผลิตไบโอบิวทานอลจากการย่อยสลายของเปลือกถั่วเหลือง, มานพ บุญเจริญ
การผลิตไบโอบิวทานอลจากการย่อยสลายของเปลือกถั่วเหลือง, มานพ บุญเจริญ
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้ทำการศึกษาการย่อยสลายเปลือกถั่วเหลืองด้วยกรดเพื่อใช้เป็นสารตั้งต้นในการผลิตอะซิโตน เอทานอล และบิวทานอล ด้วยเชื้อ Clostridium saccharobutylicum ATCC BAA 117 การย่อยสลายทำในหม้อนึ่งไอน้ำความดันสูงที่ความเข้มข้น อัตราส่วนของแข็งต่อของเหลว และเวลาในการทำปฏิกิริยาที่ค่าต่างๆ สภาวะที่ดีที่สุดสำหรับการผลิตน้ำตาลรีดิวซ์ที่สูงและสารยับยั้งที่ต่ำ มีดังนี้ ความเข้มข้นกรดร้อยละ 5 โดยปริมาตร อัตราส่วนของแข็งต่อของเหลว 1 ต่อ 5 เวลาการย่อยสลาย 15 นาที น้ำตาลไฮโดรไลเซทประกอบด้วยน้ำตาลรีดิวซ์รวม 31.86 กรัมต่อลิตร รวมทั้งเฟอร์ฟูรัล 0.66 กรัมต่อลิตร และไฮดรอกซีเมทิลเฟอร์ฟูรัล 0.059 กรัมต่อลิตร เฟอร์ฟูรัลที่ความเข้มข้น 0.05 กรัมต่อลิตร ได้แสดงฤทธิ์ยับยั้งการเจริญเติบโตของ C. saccharobutylicum ATCC BAA 117 แต่ไฮดรอกซีเมทิลเฟอร์ฟูรัลไม่มีผลกระทบ การบำบัดโดยใช้ Overliming ด้วยแคลเซียมไฮดรอกไซด์ และการดูดซับด้วยเรซิน XAD-4 และถ่านกัมมันต์ ช่วยปรับปรุงน้ำตาลไฮโดรไลเซทให้สามารถใช้ในการหมักได้อย่างมีนัยสำคัญ การหมักแบบกะที่อุณหภูมิ 35 องศาเซลซียส ค่าความเป็นกรดด่าง 5.5 เมื่อใช้น้ำตาลไฮโดรไลเซท (30-65 กรัมต่อลิตร) ที่ชนิดแหล่งและความเข้มข้นแหล่งไนโตรเจนต่างๆ การผลิตตัวทำละลายที่เหมาะสมจะได้รับจากที่สภาวะอุณหภูมิ 35 องศาเซลเซียส ค่าความเป็นกรดด่าง 5.5 ในอาหารน้ำตาลไฮโดรไลเซทที่ประกอบด้วยน้ำตาลรีดิวซ์ 65 กรัมต่อลิตร ยีตส์สกัด แอมโมเนียมอะซิเตทและน้ำแช่ข้าวโพด ตัวทำละลายรวมมีค่า 15.69 กรัมต่อลิตร ประกอบด้วยอะซิโตน บิวทานอล และเอทานอลเท่ากับ 12.15, 15.69 และ 2.39 กรัมต่อลิตร ตามลำดับ มีผลได้ตัวทำละลายเท่ากับ 0.46 และอัตราการผลิตตัวทำละลาย 0.37 กรัมต่อลิตรต่อชั่วโมง ในงานวิจัยนี้แสดงให้เห็นว่าเปลือกถั่วเหลืองสามารถใช้เป็นแหล่งคาร์บอนที่มีศักยภาพสำหรับการหมักเพื่อผลิตอะซิโตน เอทานอล และบิวทานอล
Propane Dehydrogenation To Olefins Via Modified Pt-Based/Γ-Al2o3, Napat Hataivichian
Propane Dehydrogenation To Olefins Via Modified Pt-Based/Γ-Al2o3, Napat Hataivichian
Chulalongkorn University Theses and Dissertations (Chula ETD)
The effect of transition metal(X) added on Pt/Al2O3 catalyst was studied in propane dehydrogenation reaction at 500oC. The metal contents were fixed at 0.3%wt for Pt, 4%wt for X. It was found that the transition metal had an effect upon reducibility of platinum due to its interaction with X-containing structure, resulting in the presence of Pt metal was decreased and lower initial conversions are observed. However, the final conversions are not decreased, thus the bimetallic catalysts had a better stability because the transition metal sites attracted propylene from Pt sites, so there is no propylene remain adsorbed on Pt site, …
Metathesis Of Ethylene And 2-Butene For Propylene Production Using Naoh Modified Wo3/Sio2 Catalysts, Surasa Maksasithorn
Metathesis Of Ethylene And 2-Butene For Propylene Production Using Naoh Modified Wo3/Sio2 Catalysts, Surasa Maksasithorn
Chulalongkorn University Theses and Dissertations (Chula ETD)
WO3-based catalyst is one of the most successful catalysts for producing propylene via olefin metathesis. Traditionally, it is prepared by an incipient wetness method. This suffer from severe limitations such as inhomogeneity of the WO3 deposit, alteration of the texture (pore plugging, etc.) and genesis of inactive species (WO3 crystals), resulting in low catalytic performance. The present study exploits innovative preparation methods for more efficient WO3-based catalysts by using two methods of one step preparation including non-hydrolytic sol-gel route and aerosol-assisted sol-gel process. These methods offer good control on the final catalyst composition, provide mixed oxides with excellent textures, feature …
Metathesis Reaction Of Ethylene And 2-Butene On Molybdenum-Based Catalysts, Benjamas Netiworaruksa
Metathesis Reaction Of Ethylene And 2-Butene On Molybdenum-Based Catalysts, Benjamas Netiworaruksa
Chulalongkorn University Theses and Dissertations (Chula ETD)
This dissertation studies and develops the supported molybdenum catalyst for metathesis reaction of ethylene and 2-butene to produce propylene. It was found that the major factor affecting the catalytic performance for metathesis reaction is the catalyst support. From this study, it was firstly revealed that the suitable support for molybdenum-based catalyst is the mixed support of alumina and zeolite. The catalyst containing alumina support prepared from aluminium nitrate physically mixed with HBeta support could provide high selectivity of propylene. The optimum ratio of the composite support of alumina and zeolite was 3:1. However, the most optimum support obtaining propylene selectivity …
การประมาณค่าสภาพด่างฟีนอล์ฟทาลีนและค่าสภาพกรดรวมในกระบวนการเตรียมพื้นผิวชิ้นงานด้วยวิธีการถดถอยบางส่วนกำลังสองน้อยที่สุด, ชลธร ช้างพิงงา
การประมาณค่าสภาพด่างฟีนอล์ฟทาลีนและค่าสภาพกรดรวมในกระบวนการเตรียมพื้นผิวชิ้นงานด้วยวิธีการถดถอยบางส่วนกำลังสองน้อยที่สุด, ชลธร ช้างพิงงา
Chulalongkorn University Theses and Dissertations (Chula ETD)
ในกระบวนการเคลือบสี กระบวนการเตรียมพื้นผิวชิ้นงาน (Pretreatment process) เป็นการดำเนินงานที่สำคัญมากงานหนึ่ง ประกอบด้วยขั้นตอนการล้างด่าง (Degreasing step) เพื่อล้างเอาฝุ่นรวมถึงคราบไขมันออกจากชิ้นส่วนผลิตภัณฑ์ และขั้นตอนการเคลือบผิวโลหะ (Coating step) เพื่อเพิ่มพฤติกรรมการต้านทานการกัดกร่อนของโลหะ กระบวนการนี้ใช้สารเคมีเป็นจำนวนมาก ส่งผลให้เกิดมลภาวะทางน้ำ และเกิดค่าใช้จ่ายที่เกี่ยวข้องในการบำบัดน้ำเสีย ความสามารถในการควบคุมเข้มข้นของสารละลายในกระบวนการเตรียมพื้นผิวชิ้นงานให้อยู่ในช่วงที่เหมาะสมก่อให้เกิดการใช้สารเคมีอย่างมีประสิทธิผล และส่งผลถึงคุณภาพของผลิตภัณฑ์ ความเข้มข้นของสารทำความสะอาดในบ่อล้างไขมันสามารถตรวจวัดได้ด้วยการไตเตรทค่าสภาพด่างฟีนอล์ฟทาลีน (Phenolphthalein Alkalinity: P-Alkalinity) และความเข้มข้นของสารละลายบ่อการเคลือบผิวสามารถตรวจวัดได้โดยการไตเตรตค่าสภาพกรดรวม (Total-Acidity) กระบวนการนี้ทำโดยคนนำมาซึ่งความผิดพลาดที่ไม่น่าพอใจ ดังนั้นการควบคุมความเข้มข้นของสารละลายในบ่อทั้งสองจึงกลายเป็นเรื่องที่ยากมากื งานวิจัยนี้จึงมุ่งเน้นการประมาณค่าสภาพด่างฟีนอล์ฟทาลีน และค่าสภาพกรดรวม ซึ่งแสดงถึงความเข้มข้นของสารละลายในบ่อล้างไขมันและบ่อเคลือบผิวตามลำดับ โดยอาศัยตัวแปรที่วัดค่าได้ ค่าความเป็นกรด-ด่าง ค่าสภาพการนำไฟฟ้า ค่าความหนาแน่น และอุณหภูมิ กระบวนเตรียมพื้นผิวชิ้นงานของโรงงานแห่งหนึ่งในอุตสาหกรรมผลิตเครื่องปรับอากาศจะนำมาใช้เป็นกรณีศึกษา วิธีการประมาณนี้จะอาศัยหลักการทางสถิติ และวิธีการถดถอยบางส่วนกำลังสองน้อยที่สุด (Partial Least Squared Regression: PLS) งานวิจัยพบว่าวิธีนี้จะให้ค่าประมาณสภาพด่างฟีนอล์ฟทาลีน และค่าสภาพกรดรวมที่มีค่าความคลาดเคลื่อนสูงสุดอยู่ที่ร้อยละ 7.45 และ 4.29 ตามลำดับ
อิทธิพลของสารต้านจุลินทรีย์ซิงค์ออกไซด์และคาร์วาครอลต่อสมบัติของบรรจุภัณฑ์อาหารที่เตรียมจากพอลิบิวทิลีนซัคซิเนต, ศสิณี วิบูรณวงศ์
อิทธิพลของสารต้านจุลินทรีย์ซิงค์ออกไซด์และคาร์วาครอลต่อสมบัติของบรรจุภัณฑ์อาหารที่เตรียมจากพอลิบิวทิลีนซัคซิเนต, ศสิณี วิบูรณวงศ์
Chulalongkorn University Theses and Dissertations (Chula ETD)
พอลิบิวทิลีนซัคซิเนต (PBS) เป็นพลาสติกย่อยสลายได้ทางธรรมชาติกลุ่มพอลิเอสเทอร์ ที่มีสมบัติใกล้เคียงกับพลาสติกจากปิโตรเคมี งานวิจัยนี้มุ่งพัฒนาฟิล์มบรรจุภัณฑ์อาหาร PBS ที่สามารถต้านเชื้อจุลินทรีย์ได้โดยการเติมสารต้านจุลินทรีย์ 2 ชนิด คือ ซิงค์ออกไซด์ (ZnO) ซึ่งจัดอยู่ในกลุ่มสารต้านจุลินทรีย์จากสารเคมี และคาร์วาครอล (Carvacrol) ซึ่งเป็นสารต้านจุลินทรีย์จากธรรมชาติ งานวิจัยนี้ศึกษาอิทธิพลของปริมาณสารต้านจุลินทรีย์แต่ละชนิด ร้อยละ 2, 4, 6, 8 และ10 โดยน้ำหนัก ต่อการยับยั้งเชื้อ E.coli (แบคทีเรียแกรมลบ) และ S.aureus (แบคทีเรียแกรมบวก) พร้อมทั้งศึกษาอิทธิพลของความหนาของฟิล์ม PBS ที่ผสมสารต้านเชื้อจุลินทรีย์แต่ละชนิด ระดับความหนา 50 75 และ 100 ไมโครเมตร ต่อสมบัติเชิงกลและการยับยั้งเชื้อ ผลการทดสอบบริเวณยับยั้งเชื้อ (Clear zone) ด้วยวิธีการแพร่ในอาหารเลี้ยงเชื้อแบบแข็ง (Agar diffusion method) พบว่า เริ่มพบบริเวณยับยั้งเชื้อ S.aureus และพบบริเวณยับยั้งเชื้อ E.coli เมื่อเติม ZnO ร้อยละ 6 โดยน้ำหนัก สำหรับฟิล์มหนา 50 ไมโครเมตร ในทำนองเดียวกัน เริ่มพบบริเวณยับยั้งเชื้อ S.aureus เมื่อเติม Carvacrol ร้อยละ 4 โดยน้ำหนัก แต่เริ่มพบบริเวณยับยั้งเชื้อ E.coli เมื่อเติม Carvacrol ร้อยละ 6 โดยน้ำหนัก ผลการทดสอบสมบัติเชิงกล พบว่า ฟิล์ม PBS/ZnO มีระยะยืด ณ จุดขาดและความต้านทานแรงกระแทกลดลง เมื่อปริมาณ ZnO มากขึ้น เพราะอนุภาค ZnO เป็นสารอนินทรีย์ที่มีความแข็งมากกว่า PBS และ ZnO มิได้สร้างพันธะยึดติดกับ PBS ดังยืนยันโดยผลทดสอบ FTIR การตรวจดูระดับจุลภาค พบ ZnO จับตัวเป็นกลุ่มก้อนเมื่อปริมาณ ZnO …
Effect Of Additives In Lubricant On Cobalt-Iron Alloy Lapping, Wiraya Anamnart
Effect Of Additives In Lubricant On Cobalt-Iron Alloy Lapping, Wiraya Anamnart
Chulalongkorn University Theses and Dissertations (Chula ETD)
To maintain this flying height of read-write head (called slider) at 12 nm across the disk, read and writer elements will be lapped to meet designed surface roughness, surface topography, as well as magnetic property. The writer element was made from cobalt-iron alloy (CoFe). Final lapping process of sliders uses lubricant to control surface morphology and to avoid corrosion. The aim of this study was to determine the effect of additives on corrosion protection of CoFe. The corrosion was studied by potentiostat technique and atomic force microscopy (AFM). Water content was determined by Karl Fischer method. Thin film passivation was …
Synthesis And Characterization Of Poly(Urethane-Imide)/Poss Nanocomposite, Supanan Patthamasang
Synthesis And Characterization Of Poly(Urethane-Imide)/Poss Nanocomposite, Supanan Patthamasang
Chulalongkorn University Theses and Dissertations (Chula ETD)
A novel type of poly(urethane-imide) (PUI) was prepared by blending the isocyanate terminated polyurethane containing dihydroxy-POSS prepolymer (PU/POSS) and anhydride-terminated polyimide (PI) with various chain lengths of PU/POSS prepolymer and various molecular weights of PI. The effect of chain length of PU prepolymer and molecular weight of PI on the properties of PUI/POSS films was examined. From the results, we found the best condition for synthesis of the PUI/POSS hybrid films is to use the PI prepared via 1 step method with MW of 80,000 and that can prepared the transparent films, follwed by casting films and heat treatment at …