Chemical Engineering Commons^™

Algorithms For The Synthesis Of A Temperature Control System For The Inner Tube Heat Exchanger With A Steam Jacket, H.Z. Igamberdiyev, Jasur Sevinov, U.F. Mamirov, Sh.M. Abdishukurov

Chemical Technology, Control and Management

The synthesis of a feedback propagation control law for an inner tube heat exchanger with a steam jacket is addressed in this text. A controller has been developed that, based on temperature measurements taken at four points. The maintains the output temperature at a specified level by acting on the steam jacket temperature. To determine the parameters of the plant, a linear quadratic optimal (LQ-optimal) algorithm is employed. In the considered case, the optimal controller includes a proportional–integral (PI) component, as well as an additional term that requires storing the control input over the current interval for its computation. The …

Intelligent Method Of Dynamic Control For A Class Of Stochastic Nonlinear Systems, Isamidin Khakimovich Siddikov, Davronbek Abdalimovich Khalmatov, Gulchekhra Rakhimjanovna Alimova, Dilnoza Rakhmanovna Khushnazarova

Chemical Technology, Control and Management

The paper considered the problems of researching the stabilisation system and backstepping control of stochastic nonlinear systems. The characteristics of stochastic nonlinear dynamic control systems are random signals with normal lawful distribution, which significantly complicates task control. In stochastic control, it is necessary to determine the trajectories of the control variables in order to achieve the desired control objective at minimum cost. Since the mathematical equations of stochastic nonlinear systems are not always constant, not every model-based controller can be accurate. Therefore, in this work, a neuro-fuzzy network is used to evaluate the parameters of the control system with backstepping, …

Reinforcement Learning In A Virtual World: A Study Of Ppo And Sac Within Unity Ml Agents, Rufat Mammadzada

Chemical Technology, Control and Management

This study explores the use of Unity3D as a versatile platform for developing, training, and evaluating intelligent agents through reinforcement learning. Leveraging the Unity ML-Agents Toolkit, a dynamic 3D environment was created to examine agent learning behavior using two advanced algorithms: Proximal Policy Optimization (PPO) and Soft Actor-Critic (SAC). The simulation environment consisted of navigable terrain bounded by red borders, with collectible blue balls serving as rewards and a purple cube representing the agent. A carefully designed reward system was implemented to encourage goal-directed behavior and penalize inefficiency, while time constraints introduced an additional challenge requiring both precision and speed. …

Structural And Biological Properties Of Chitosan/Copper Polymetallic Complexes Synthesized From Apis Mellifera-Derved Chitosan, Dilnoza Sohibovna Isomitdinova, Gulnora Akmalovna Ikhtiyarova, Nazira Madusmanovna Kuchkarbayeva, Nafisa Akhrorovna Ergasheva

Technical science and innovation

In this study, a chitosan/copper (Ch/Cu²⁺) polymetallic complex was synthesized from chitosan obtained by the cryogenic method from Apis mellifera bees. The structural and physicochemical properties of the complex were investigated using FTIR, UV-Vis, XRD, TGA, and DLS analyses. FTIR spectra showed shifts in absorption bands at 1400-1339 cm⁻¹ and 1640-1550 cm⁻¹, confirming the coordination of Cu²⁺ ions with amino and hydroxyl groups. UV-Vis spectra revealed absorption peaks in the 410-540 nm range, while XRD analysis indicated new crystalline peaks at 2θ = 24°, 27°, and 37°. Thermal analysis demonstrated high thermal stability of the complex, and DLS confirmed a …

Improvement Of Ultrasonic-Convective Equipment And Beetroot (Beta Vulgaris L.) Drying Process, Jasur Esirgapovich Safarov, Shakhnoza Abduvaxitovna Sultanova, R. M. Najafli

Technical science and innovation

In the world, the air-dried food market is seeing rapid expansion, valued at USD 103.26 billion in 2021, out of which the Asia Pacific region consumed the maximum amount. The freeze-dried vegetable and fruit market is predicted to reach USD 132.7 billion by 2027. Processed vegetables are also exported to a large extent from India. Uzbekistan recorded excellent development in agriculture in 2024, with record harvests, better yields, and use of advanced machinery. Azerbaijan also demonstrated good agriculture growth and export performance. Beetroot has now been identified as a functional food containing bioactive compounds like betaines and dietary fiber that …

Optimizing Beer Fermentation Through Intelligent Control, Azizbek Nodirbekovich Yusupbekov, Mirjalol Yusupov

Chemical Technology, Control and Management

This paper presents an intelligent control approach for optimizing the beer fermentation process using fuzzy logic and adaptive neuro-fuzzy inference systems. By incorporating multivariable inputs—temperature error and pH deviation—the proposed system effectively handles the nonlinear dynamics and biological variability inherent in fermentation. Simulation results demonstrate improved control accuracy, responsiveness, and robustness compared to conventional methods, making the approach suitable for integration in modern brewery automation systems.

Application Of Neural Networks For Intelligent Processing Of Sensor Signals In The Control Of Technological Process Parameters, N.R. Yusupbekov, Yu.Sh. Avazov, G.Kh. Rashidov

Chemical Technology, Control and Management

This scientific article investigates the problem of analyzing technological process parameters in the fields of chemistry, energy, and metallurgy based on sensor data and applying intelligent signal processing methods. The main objective is to evaluate the effectiveness of artificial intelligence and deep learning models for intelligent analysis, forecasting, and anomaly detection of data obtained from sensors. Time-series data collected from industrial sensors were analyzed using LSTM (Long Short-Term Memory) and Autoencoder neural networks, as well as the Kalman filter. At the first stage of the study, sensor signals were denoised and their true state was estimated using the Kalman filter. …

Algorithms For The Synthesis Of Adaptive Control Systems Based On The Speed-Gradient Method, Oxunjon Boborayimov

Chemical Technology, Control and Management

This paper discusses the synthesis algorithms for adaptive control systems based on the speed-gradient method. Adaptive control systems with implicit reference and adjustable models are synthesized using speed-gradient techniques, which reduce the requirements for the main control loop structure and the completeness of measurement data. Stable adaptive decentralized control algorithms are developed for a class of interconnected systems with nonlinear local dynamics and uncertainties, ensuring the stability of individual subsystems and the overall system while accounting for their interactions. To incorporate inter-subsystem interactions into the overall control law, an adaptation algorithm based on the speed-gradient method is introduced. A synthesis …

Finding The Shortest And Optimal Path With Metaheuristic And Madm Methods, Narmin Ibrahim Hasanli

Chemical Technology, Control and Management

The article had described a method for finding the shortest and most optimal path among cities. The data had been taken from the TSPLIB library, which had provided standard examples for the Traveling Salesman Problem. This approach had integrated the advantages of the meta-heuristic technique and the Multi Attribute Decision Making method to solve the problem effectively. In the first stage, the population based meta-heuristic method ACO (Ant Colony Optimization) had found optimal solutions in large search spaces. The use of pheromone trails, heuristic information and an iterative search process had given the opportunity to find the best or near-best …

Modeling Of Urea Drying And Granulation Process In Fluidized Bed, Jalolitdin Pakhritdinovich Mukhitdinov, Aleksey Viktorovich Schulz

Chemical Technology, Control and Management

This article is devoted to the mathematical modeling of urea drying and granulation processes in a fluidized bed. A brief description is provided for the functional blocks included in the mathematical model, along with the required parameters that form an integrated representation of the technological process. The SR-POLAR model is used to describe a phase equilibrium between the components involved. The interconnections between functional blocks are shown in the process flow diagram. Block diagrams for modeling a multi-chamber granulation unit and the cooling system for the resulting granules are presented. Granule growth in the fluidized bed is described using a …

Algorithms For Assessing Soil Salinity Levels Based On Remote Sensing Imagery, Bobomurod Mamitjonovich Tojiboev

Chemical Technology, Control and Management

This article investigates methods for assessing soil salinity levels based on satellite (remote sensing) imagery and their calculation algorithms. Determining the degree of salinity plays a crucial role in the rational use of land resources and increasing agricultural efficiency. The study analyzes indices for determining soil salt content using remote sensing technologies, particularly multispectral images obtained from satellite systems such as Landsat and Sentinel (for example, SI - Salinity Index, NDVI - Normalized Difference Vegetation Index, and others). Furthermore, algorithms are developed based on these indices that enable automatic determination of salinity assessments. Artificial intelligence, machine learning, and geographic information …

Research And Development Of Intelligent Measurement Systems, Odil Abdujalilovich Jumaev, Mahmudov Giyosjon Baqoyevich

Chemical Technology, Control and Management

The article discusses modern methods for developing intelligent measuring systems. Intelligent measuring systems are systems based on intelligent technologies that not only accurately measure physical or chemical quantities, but also have the ability to self-analyze, diagnose and make management decisions. The article comprehensively examines the architecture, components of such systems, the organization of their software and hardware, the relationship of sensors and artificial intelligence algorithms. It also analyzes the practical application and prospects of intelligent measuring systems in such areas as industry, medicine, energy, ecology, transport.

Modern Methods Of Self-Monitoring, Diagnostics, And Fault Tolerance In Flow Measurement Systems, Elbek Ortiqov

Chemical Technology, Control and Management

This article investigates various methods and tools for self-monitoring and fault tolerance in flow measurement transducers used in industrial processes. The study focuses on key techniques such as the use of redundancy, generation of reference values, analysis of measurement signals, and control of disturbance variables. These methods allow transducers to detect potential faults, ensure reliable operation, and maintain measurement accuracy even under adverse conditions. The article highlights how self-monitoring contributes to improving system safety, increasing reliability, and reducing downtime. It also discusses the integration of intelligent monitoring systems that support predictive maintenance and real-time diagnostics. Fault-tolerant sensors with self-monitoring capabilities …

Synthesis Of A Control System For Thermal Energy Facilities Using The Quantum Photon Spin Method, Isomiddin Siddikov, N.S Yakubova

Chemical Technology, Control and Management

Increasing energy efficiency and reducing fuel consumption in the process of generating electricity and heat at thermal power plants is one of the urgent tasks. Such systems operate under conditions of random changes in external and internal influences, as well as measurement uncertainties, which reduce the quality of control. In order to overcome this problem, it was proposed to develop an intelligent control system using the quantum photon-spin method to control technological units of thermal power plants. In the proposed approach, a multi-dimensional heating boiler device was taken as a control object, and the simulation modeling of the control system …

Increasing The Robustness Of A Control System For A Complex Dynamic Plant By Correcting Nonlinearity In The Warping Process, Tukhtamurod Khayitmurodovich Avezov, Zokhid Ergashboyevich Iskandarov

Chemical Technology, Control and Management

The paper discusses the challenges of enhancing the robustness of a control system for a complex dynamic plant by addressing nonlinearity in the warping process. Devices that ensure the stability of the control system against parameter non-stationarity on the warping machine are referred to as state controllers. The operating principle of these devices relies on providing artificial nonlinearity to the rear connection circuit of the control system's actuator. However, this nonlinearity is implemented using components that consider the parameters of low control quality. Therefore, it is necessary to continuously adjust the nonlinearity parameters to, on one hand, reduce the load …

Evaluation Of Deep Learning Techniques In Road Sign Recognition, Latafat Abbas Gardashova, Haji Fakhraddin Hajiyev

Chemical Technology, Control and Management

Deep learning has transformed the computer vision field and greatly improved the performance and efficiency of road sign recognition systems. This research compares different deep learning methods, such as Convolutional Neural Networks (CNNs), Recurrent Neural Networks (RNNs), and hybrid models, in terms of their ability to effectively detect and classify road signs under various conditions. The study compares performance measures such as accuracy, processing speed, and robustness to environmental conditions like low lighting, occlusion, and adverse weather. The results show that CNN-based methods, especially those with transfer learning and ensemble techniques, have better performance in real-time scenarios. Problems like computational …

A Smart System For Detecting Anatomic And Histological Symptoms Of Diseased Agricultural Plants, Rustam Baratov, Himola Sunnatillayeva, Alimardon Mamatovich Mustafoqulov

Chemical Technology, Control and Management

This study describes a novel agricultural plant disease detecting smart system, capable of handling measured plant body parameters and images received by high resolution camera at the same time. The proposed plant disease detection method is based on evaluation of the signals received by measured and controlled plant body physical parameters like resistance, temperature and capacitance of the plant stem and image processing. An analogue plant model based on an electrical circuit with distributed parameters was developed. In addition, in the article the block diagram of the smart system for the early detection of plant diseases, the circuit diagram, its …

Development Of An Ann-Based Predictive Model For The Efficient Treatment Of Industrial Wastewater, Alisher Khudoyberdi Ugli Rakhimov, Hasan Siddiq Ugli Murodov, Farrukh Bakhtiyorovich Igitov, Shuhrat Ahmadjonovich Mutalov, Jaloliddin Abdurazzakovich Eshbobaev

Chemical Technology, Control and Management

The effective removal of free chlorine ions from industrial wastewater is critical to ensure process safety, minimize equipment corrosion, and protect aquatic environments. In this study, a laboratory-scale activated carbon filtration system was developed and tested to treat chlorine-contaminated water collected from sludge collectors at industrial facilities. A total of 200 experimental trials were conducted under varied operational conditions, including changes in flow rate, initial chlorine concentration, pressure, pH, temperature, and activated carbon dosage. The resulting dataset was used to train a predictive model based on a feedforward backpropagation artificial neural network (ANN) implemented in MATLAB. The ANN model demonstrated …

Modeling Of Carbonization And Absorption Processes In Soda Ash Production, Nadirbek Rustambekovich Yusupbekov, Djalolitdin Paxritdinovich Mukhitdinov, Fatima Faxritdinovna Iskhakova

Chemical Technology, Control and Management

The article considers the problem of modeling the ammonia-soda process of soda ash production and presents the chemistry of sodium bicarbonate (NaHCO₃) formation. The equation of the kinetics of the reaction, used as a model of the carbonation process, is derived from a system of equations and its computer model is compiled. The system of differential equations reflecting the kinetics of the process was solved in the Mathcad package. The result of the modeling is presented. Based on the experimental data, the dependence of the absorption column performance on temperature and the dependence reflecting the optimal value of the absorption …

Design Of Automation For The Absorption Process In Hydrogen Purification From Carbon Dioxide, Azizbek Nodirbekovich Yusupbekov, Saidamirkhon Oripov, Diyoraxon Zokirxon Qizi Oripova

Chemical Technology, Control and Management

This article discusses the automation of the methanol-acetone mixture absorption process to improve control efficiency. The existing local automatic control system (ACS) was upgraded to a cascade system, reducing component concentration deviations by 12% and decreasing the transition process time from 1606 to 1592 seconds. A mathematical model of the gas absorption process was developed, incorporating material balance equations, mass transfer equations, and transfer functions. The parameters of the PI controller were calculated to ensure system stability under ±10% coefficient variations. A comparative analysis of system characteristics before and after modernization confirmed a reduction in overshoot to 0% and an …

The Importance Of The Analog-To-Digital Converter In The Measurement System, Aliev Ravshan, Anvar Djalilov

Chemical Technology, Control and Management

At the moment, many scientific researches are being conducted all over the world on the economical use of water and energy resources. Most of the scientific research works are aimed at improving measurement techniques and technologies, that is, increasing their accuracy. With this in mind, a high-precision analog-to-digital converter due to its unique metrological and technical characteristics was studied in this research paper. As a result of the study, it became clear that the use of a small-sized, high-precision sigma-delta analog-to-digital converter in modern measuring technology has a positive effect on its accurate and efficient operation.

Energy Conversion In Nuclear Batteries, Suhrob Vahob O'G'Li Ibrohimov

Chemical Technology, Control and Management

The transformation of energy in nuclear reactors or processes involves converting mass into energy as a result of nuclear reactions. This can include nuclear fission (splitting heavy atomic nuclei) or nuclear fusion (combining light nuclei). In these processes, energy is released in the form of heat, which can be used for electricity generation or other purposes.

Optimisation Of Astatic Controllers In Automatic Control Systems, Isamiddin Xakimovich Siddikov, Dilnoza Maxamadjanovna Umurzakova

Chemical Technology, Control and Management

This article examines the influence of various factors on the efficiency of optimizing station controllers in automatic control systems. The main focus is on minimizing static errors and improving the reliability of controllers. Optimization methods for PID and PI²D controllers are discussed, including the use of modern approaches such as genetic algorithms. The necessity of compromise solutions to achieve high-quality system responses to various impacts is investigated. It was also suggested that there is a need for an integrated approach to setting up controllers in order to increase their reliability and flexibility in conditions of dynamically changing processes. …

Adaptive Control Of Air Purification Processes In Industrial Painting Workshops: A Review Of Scientific Literature, N.A Kabulov, Sh. Mamatbekov

Chemical Technology, Control and Management

This article examines modern approaches to adaptive control of air purification processes in industrial facilities, particularly in paint shops for parts coating. The relevance of the study is driven by the need to enhance air purification efficiency, ensure worker safety, and comply with environmental regulations. The paper analyzes adaptive control methods, including the use of neural networks, machine learning, and adaptive control algorithms, which enable real-time optimization of purification systems. Special attention is given to the utilization of sensor data for predicting pollution levels and automatically adjusting purification parameters. The article also discusses the advantages and limitations of implementing adaptive …

Algorithms For Making Control Systems Based On Neural Network Technology To Automate Dynamic Plants, Jasur Sevinov, Abdishukurov Maqsudovich Shavkat

Chemical Technology, Control and Management

This paper examines the stages of multilayer neural network technology for the control and identification of dynamic systems. It is seen many ways to use multilayer neural networks in control systems. Neural controllers are based on several models and algorithms. Examples of such algorithms include the predictive model-based control algorithm, the Narma-L2 control algorithm, and the benchmark model-based control algorithm. These controllers illustrate various general ways to use multilayer neural networks in control systems. Common, standard linear control architectures have been proposed for many neural controllers.

Studying The Technology For Obtaining Zinc Chloride From Spent Supporter Waste In Ammonia Production, A.T. Dadaxo‘Jaev, Sodikjon Kadirov

Chemical Technology, Control and Management

This article presents the results of research on the recycling of spent zinc adsorbents formed during the ammonia production process, aimed at obtaining zinc chloride (ZnCl₂), which can be utilized in various industrial sectors, including electroplating. The research covers the optimization of technological parameters such as hydrochloric acid concentration, temperature, and reaction time to efficiently extract zinc chloride. The experiments revealed that the best results are achieved by using a 20% hydrochloric acid solution, at a temperature of 60°C, with a reaction time of 60 minutes. The resulting 40% zinc chloride solution was tested in electroplating production, where it met …

Artificial Intelligence Applications For Grid-Connected Solar Inverters, Utkirjon Ubaydullaev, Sarvinoz Mirzaeva, Hasan Mustafoev

Chemical Technology, Control and Management

The increasing global demand for renewable energy has highlighted the importance of grid-connected solar inverters in ensuring efficient and stable power conversion. However, challenges such as fluctuations in solar energy generation, grid disturbances, and power quality issues necessitate advanced control strategies. The integration of artificial intelligence (AI) into solar inverters presents a transformative solution, enhancing performance, adaptability, and reliability in real-world applications.

This review explores the role of AI techniques, including machine learning (ML), deep learning (DL), fuzzy logic, and reinforcement learning (RL), in optimizing key inverter functionalities such as maximum power point tracking (MPPT), fault detection, power quality enhancement, …

Algorithms For Feature Extraction And Optimisation Of Object Recognition Operator, Hudayberdiev Xakkulmirzayevich Mirzaakbar, Bobomurod Mamitjonovich Tojiboev, Feruza Komiljonovna Samadova

Chemical Technology, Control and Management

This paper deals with the development and analysis of feature extraction and optimisation algorithms for object recognition operators. Different algorithms are used to improve the efficiency of recognition operators in the automatic analysis of remote sensing images. The information model of objects and methods for selecting, extracting and optimising their features have been studied. The issue of extracting important features of objects using spectral, textural and statistical features and constructing optimal operators based on them has also been studied. Effective approaches based on the theory of convex hulls and multidimensional analysis methods have been proposed, taking into account the mutual …

Application Of Quantum Algorithms In Optimization Of Cognitive Decision-Making Systems, Noilakhon Yakubova

Chemical Technology, Control and Management

The article analyzes the potential of quantum algorithms for optimizing cognitive decision-making systems in production processes in the energy sector. Compared with traditional algorithms, quantum algorithms allow high-speed processing of large amounts of variable data in real time and solving multiparameter problems based on an integrated approach. The study considers uncertainties and issues of increasing efficiency in the processes of production and distribution of electricity using a cognitive model. The integration of quantum algorithms into this model allows developing optimal strategies for using resources in production. A heating boiler was taken as a control object, and taking into account its …

Detection Of Http Flood Attacks Based On Machine Learning Algorithms, Norbek Karimov, Furkat Rakhmatov, Oybek Xolmuminov

Chemical Technology, Control and Management

This paper analyzes the effectiveness of Random Forest and SVM models for detecting HTTP Flood attacks. Experimental results demonstrate that both models achieve high accuracy. Evaluation was conducted using Precision, Recall, and F1 Score metrics. Additionally, key features of network traffic were extracted through correlation analysis to enable real-time application of the models in attack detection. The findings provide important insights into detecting DDoS attacks using machine learning and improving model performance.