Chemical Engineering Commons^™

Research Of The Dynamic Characteristics Of A Time-Pulse Ultrasonic Sensor, Aliev Ravshan, A.U. Djalilov

Chemical Technology, Control and Management

This article investigates the dynamic characteristics of a time-pulsed ultrasonic sensor used to measure water flow in open channels. The operating principle of the sensor, its response time in various hydrodynamic conditions, speed, and factors affecting measurement accuracy are analyzed. In the process of research, the improved ultrasonic sensor was tested and its effectiveness in measuring water flow in real time was evaluated. The results obtained showed that the sensor adapts to the velocity, temperature and turbulence level of the water flow. Based on the results of the research, the possibilities of working of time-impulse ultrasound sensors in open channels …

Algorithms For Fast Fire Risk Prediction And Real-Time Data Processing, Mirzoyan Mirzaaxmedovich Kamilov, Tolaniddin Ramziddinovich Nurmukhamedov, Oybek Zokirovich Koraboshev, Bakhodir Saydullayevich Achilov

Chemical Technology, Control and Management

Ensuring fire safety in facilities with high fire risk is one of the pressing problems of modern society. Nowadays, there is a great need for accurate and effective prediction systems for fire prevention and rapid response. Since traditional methods do not provide the ability to quickly analyze and predict in real time, the development of algorithms and modern approaches using modern technologies is of great importance. This article analyzes fire risk prediction algorithms, their principles of operation and effectiveness, and considers methods for assessing and predicting fire risk using Artificial Intelligence (AI), Machine Learning (ML), and Big Data technologies. The …

Security In Biometric Access Control Systems Based On Fingerprints, Elmurad Jamuradovich Qilichev, Baxodir Saydullaevich Achilov, Ismoil Ergash OʻGʻLi Isroilov, Mirshod Mirkomil O'G'Li Ahmadov

Chemical Technology, Control and Management

This article analyzes biometric access control systems using fingerprints. The article considers the advantages of using biometric technologies, including solutions aimed at ensuring security, protecting users' personal data, and increasing the efficiency of systems. A detailed explanation of the principles of operation of fingerprint biometric systems, their underlying algorithms, and technological advances is provided. Problems that arise when assessing the level of security, ease of use, and technological and social aspects of biometric access systems and methods for combating them are also covered. At the end of the article, opinions are expressed about the future of fingerprint-based biometric systems and …

Determination Of Optimal Parameters For Quality Drying Of Garlic Using The Vibro-Convective Method, Jasur Safarov, Shakhnoza Sultanova, Abdurakhmon Mirkomilov

Chemical Technology, Control and Management

This article examines the process of drying garlic using a low-temperature vibratory-convective drying system. At the "Service Technology" department of Tashkent State Technical University, a vibratory dryer was developed to ensure high-quality drying of garlic while maximizing the preservation of its biologically active compounds. Through experimental studies, optimal drying parameters were determined, including the degree of moisture removal, process duration, airflow velocity, and vibration acceleration. The results obtained contribute to enhancing the efficiency and quality of garlic drying, which holds practical significance for agricultural producers and consumers interested in healthy nutrition.

Development Of Fuzzy Ontology For Explainable Artificial Intelligence For Decision-Making In Fuzzy Environment, Pavel Kosov

Chemical Technology, Control and Management

In modern artificial intelligence systems, there is an acute need to understand the decision-making logic of "black box" algorithms. Our research proposes an innovative method for increasing the transparency of such systems through the formalization of fuzzy explanatory mechanisms. We have developed an extension of existing ontological approaches by introducing the concept of fuzziness into the structure of explanatory properties, which allows overcoming the fundamental limitations of traditional XAI methods. The proposed formalization is based on the theory of collective mental models and principles of fuzzy logic, providing a more accurate reflection of uncertainty and subjectivity in expert knowledge. Our …

Design Features Of Ion Exchange Plant For Wastewater Treatment, Tatyana Vladimirovna Drabkova, Sadritdin Makhamatdinovich Turabdzhanov, Fayzulla Nigmatullaevich Rakhmatullaev, Ulughukha Nusratullaevich Rakhmatov, Aziza Alimdzhanovna Shokhakimova

Technical science and innovation

This study presents an ion exchange unit designed for selective and comprehensive wastewater treatment. The unit includes all technological processes: solution filtration, ion exchanger loosening, sorbent regeneration and washing, which is a significant advantage of the proposed technology and eliminates the need for additional devices. This significantly increases the overall efficiency of the cleaning process, reducing costs and simplifying the operation of the system. Experimental studies have confirmed the high efficiency and feasibility of using ion exchange units in modern operating conditions, which makes them universal in application for various industries, including metallurgy and chemistry. The main idea of the …

Sorption-Spectroscopic Method For Determining Mn Ions In Wastewater, Zulayho Asanalievna Smanova, Zukhra Ziyatovna Yakshieva, Nazira Kuchkarbayevna Madusmanova, Gulyorkhon Otkir Qizi Miradkhamova

Technical science and innovation

In this article, the processes of metal complex synthesis are studied in detail. Zinc OEDF+NTF complexation reactions were carried out in the presence of polyhydric alcohols, ethylene glycol, glycerol, and citric acid. For the first time, the synergistic efficiency of a mixture of zinc OEDF+NTF complexes with methyldiethanolamine, used as an inhibitor of mineral salt accumulation, was studied. It was found that when selecting the components in equivalent amounts, the inhibition efficiency of the composition is at least 90%. The high efficiency of inhibiting mineral salt accumulation in the composition is due to the presence of methyldiethanolamine, alkylimidazoline, and their …

Mechanical Cleaning Of Industrial Exhaust Gases By Wet Method., A. A. Turgunov, E. A. Egamberdiev, R. F. Rashidov, A. A. Kholmurodov, D. J. Ergash

Technical science and innovation

Environmental protection is a priority area of human development. This paper presents the materials of scientific research of the creative group of the Tashkent State Technical University named after Islam Karimov, aimed at mineralization of the load on the environment, in particular on the atmospheric air of industrial enterprises. One of the more accessible solutions to this problem is the use of modern, more efficient devices for capturing and neutralizing exhaust gas emissions into the atmosphere from industry. Today, the use of mechanical methods for capturing pollutants is relevant due to the simplicity of design and operation. Wet methods for …

The Role Of Chitosan In Increasing The Mechanical And Antibacterial Properties Of Paper, Khurshid Khamidulla Ugli Khaydullaev, Jaloliddin Faxriddin Ugli Ungarov, Munavvar Umar Kizi Iskandarova, Yorqinjon Tulqin Ugli Ergashev, Guzal Yusupovna Akmalova, Elmurod Abduqodirovich Egamberdiev

Technical science and innovation

Chitosan is also widely used in the paper industry to improve paper production and paper properties. Indeed, the molecular structure of chitosan is similar to cellulose, which contributes to the formation of a strong compound. Due to the presence of chitin (-NHCOCH₃) functional groups in chitosan (-NH₂), these groups are insoluble in water, but soluble in a solution of chitosan acid with deacetylation levels above 60%. On the contrary, chitin does not dissolve. Chitin and chitosan are insoluble in alkaline and organic solutions under normal conditions. In general, a high percentage of the amine (NH_{2 …}

The Influence Of Dispersed Fillers On The Mechanical Properties Of Sulfur Polymer Heterocomposites, Erkin Abdukhafizovich Rakhmatov, Durdiymurad Gurbanovich Gadamov, Umida Alijonovna Ziyamukhamedova, Jasurbek Himmat Ugli Nafasov, Elbek Tukhtanazar Ugli Turgunaliev, Shokhjakhon Uktam Ugli Abdurakhimov

Technical science and innovation

This article discusses improving the physical, mechanical, and operational properties of composite materials modified with sulfur-containing plasticizers used in the modern construction industry. Furthermore, based on an in-depth analysis of the literature, the types and sizes of fillers and the significance of their mixing technology in the formation of a structure with low porosity of a composite material with a sulfur binder have been studied. The article thoroughly describes a method for obtaining a composite material with a stable sulfur-containing binder, the processes of preparing a solid filler, impregnating the filler with an organic modifier, humidifying and heating the filler …

Approach Formula To Increase Energy Efficiency Of Internal Combustion Engines In The “Green Economy” And Impact On The Natural Ecosystem, Zakirjon Ergashevich Musabekov, Hilola Zokir Qizi Uralova, Sayyodbek Ilxomjon O‘G‘Li Abdullajonov

Technical science and innovation

This article discusses, analyzes, and proposes solutions for the role of internal combustion engines in forming a "green economy", as well as ways to replace or modernize them. The relationship between internal combustion engines and the "green economy," as well as their energy efficiency and impact on natural ecosystems, is a crucial and urgent issue. These engines primarily generate energy through the combustion of petroleum-based fuels such as gasoline and diesel. However, this process releases harmful gases into the atmosphere, contributing to environmental degradation. The green economy is an economic model designed to protect the environment, ensure the efficient management …

Modern Ir-Spectroscopic Methods For The Analysis Of Hydroxybenzene-Methanal Resin Obtained On The Basis Of 2,5-Furandion, Sherali Anvarovich Umarov, Ravshan Israilovich Ismailov Ismailov

Technical science and innovation

The chemical changes occurring during the synthesis of hydroxybenzene-methanal resins obtained on the basis of 2,5-furandion under various ratios and temperature conditions were investigated using the IR spectroscopic method. Analysis of the compositional changes in the resin during the production of the thermoreactive resin revealed that the content of hydroxyl groups (~3300–3500 cm⁻¹) decreased, while the aldehyde groups (~1700–1750 cm⁻¹) increased; moreover, the presence of ether groups (~1050–1150 cm⁻¹) indicated that the process was successful. The synthesis of resins based on thermoreactive hydroxybenzene-methanal resins was carried out at high temperatures (70°C, 80°C, 95°C). During the identification of the functional groups …

Methodology Of Automated Control Of Situations In Structurally Complex Systems With Recycled Flows, Khusan Zokirovich Igamberdiev Academician, Madina Mirxalilovma Fozilova

Chemical Technology, Control and Management

This article discusses the methodology of automated management of situations in structurally complex systems with recycled flows. The need to develop a correct model for effectively controlling such systems based on scientific principles of analysis and decision-making is substantiated. Particular attention is paid to modeling, optimizing, and using digital technologies, including artificial intelligence, to improve the accuracy and efficiency of management decisions. The principles of decomposition, multi-criteria optimization, and linguistic models of fuzzy correspondence are described, which can be used in conditions of uncertainty and complexity of industrial facilities.

Joint Estimation Of The State And Parameters Of Dynamic Control Objects Based On The Maine Estimator, Yulduz Abdurakhmanova

Chemical Technology, Control and Management

The issues of constructing an adaptive joint estimation of the state and parameters of dynamic control objects using the Maine estimator are considered. There are various variants of the extended filter, and a variant based on iterations between parameter and state estimates was used in the work. In this version of the extended Kalman filter, the problem of joint parameter and state estimation is solved in such a way that parameter estimation is performed before state estimation. Then, the parameter values are used to assess the state. In this case, further iterations between the state vector estimation and the parameter …

Determination Of Chemical And X-Ray Phase Analysis Of Carbon-Containing Material, Sh.T. Juraev, B.F. Muxiddinov, U.T. Tailakov

Chemical Technology, Control and Management

This paper presents a chemical and X-ray diffraction study of the solid fraction obtained from the thermal-oxidative pyrolysis of waste tires. The study covers the analysis of the composition of rubber products before and after pyrolysis at a temperature of 750-850 °C. A chemical analysis of the gaseous, liquid and solid phases of pyrolysis products was also carried out. The ignition temperatures of gaseous products, their percentage content, as well as the optimal boiling temperatures of the resulting condensates were determined. X-ray analysis showed that the solid carbon residue consists of calcite (7.50%), amorphous carbon (87.24%), ankerite (Ca(Mg, Fe)[CO_{3 …}

Dеvеlоpmеnt Аnd Simulаtiоn Оf Аutоmаtiс Tеmpеrаturе Соntrоl Sуstеms Fоr Sоlаr Drуеrs, Sarvar Rejabov, Botir Shukurillayevich Usmonov, Komil Usmanov

Chemical Technology, Control and Management

Thе utilizаtiоn оf sоlаr еnеrgу in thе drуing оf аgriсulturаl prоduсts is соnsidеrеd signifiсаnt duе tо its еnеrgу еffiсiеnсу аnd еnvirоnmеntаl friеndlinеss. Hоwеvеr, trаditiоnаl drуing mеthоds fасе сhаllеngеs in mаintаining stаblе tеmpеrаturе аnd humiditу lеvеls, whiсh саn lеаd tо rеduсеd prоduсt quаlitу аnd dесrеаsеd prосеss еffiсiеnсу. Tо аddrеss thеsе issuеs, thе implеmеntаtiоn оf аutоmаtiс соntrоl sуstеms is еssеntiаl. In dеvеlоping аn аutоmаtiс tеmpеrаturе соntrоl sуstеm fоr sоlаr drуеrs, thе hеаt аnd mаss trаnsfеr prосеssеs wеrе prесisеlу mоdеlеd. Thе primаrу pаrаmеtеrs оf thе drуing prосеss, suсh аs prоduсt tеmpеrаturе аnd mоisturе соntеnt dуnаmiсs, wеrе еxprеssеd thrоugh mаthеmаtiсаl еquаtiоns. PID аnd Fuzzу …

Modeling Of Analog-To-Digital Converter In Signal Processing, Ravshan Aliev, A.U. Djalilov

Chemical Technology, Control and Management

This article is devoted to the study of the modeling process of analog-to-digital converters (ADCs) that process signals, one of the main parts of control system elements and devices. As we know, ADCs are an important part of modern control systems. During the research, the main stages of analog signal conversion were analyzed, i.e. discretization, quantization, coding. A classification of analog-to-digital conversion methods was made and the advantages and disadvantages of each were identified. Also, the characteristics and parameters of ADC were studied, their impact on ADCs performance was evaluated, and it was determined that certain characteristics should be taken …

Principles And Models Of Construction Of Linear Motion Actuators With Holonomic Structure For Intelligent Robot Movement, Matyokubov Nurbek Rustamovich, Temurbek Omonboevich Rakhimov, Yusupov Bekmurod Bayotovich

Chemical Technology, Control and Management

This article is devoted to the principles and models of building linear motion actuators with holonomic structure for the movement of intelligent robots. Also, the classification of the elements of the linear movement performance according to their interconnections and technical characteristics, taking into account their physical characteristics, was seen. A morphological matrix of the construction of holonomic structured linear motion performance elements based on the classification according to the considered technical specifications is presented. The given morphological matrix of linear motion actuators serves to develop new actuators for intelligent mechatronic and robotic systems. Based on the morphological matrix of the …

Application Of An Adaptive Neuro-Fuzzy Inference System To Control The Wastewater Treatment Process, Jaloliddin Abdurazzakovich Eshbobaev, Bakhodir Tajiddinovich Khamidov, Marcos Torices Fallanza

Chemical Technology, Control and Management

This study explores the application of an Adaptive Neuro-Fuzzy Inference System (ANFIS) for controlling wastewater treatment processes using ion-exchange resins. It addresses the critical challenges of water scarcity and pollution by enhancing the regulation of water hardness (H) and Total Dissolved Solids (TDS). Using a pilot laboratory device and experimental data from the mixed wastewater of the Kungrad Soda Plant in Uzbekistan, an ANFIS model was developed in MATLAB to automate process control. The model leverages water hardness and TDS as input parameters to regulate the water flow rate by servo valve opening degree, ensuring precise and efficient treatment. Compared …

Synergic Efficiency Of Organophosphonates In The Synthesis And Corrosion Inhibition Of Zinc Complexonates, Shoyunus Botir Ugli Obidov, Xusniddin Nurboboyevich Raximov, Xasan Irgashevich Kadirov, Satridin Maxamatdinovich Turabdjanov

Technical science and innovation

In this article, the processes of metal complex synthesis are studied in detail. Zinc OEDF+NTF complexation reactions were carried out in the presence of polyhydric alcohols, ethylene glycol, glycerol, and citric acid. For the first time, the synergistic efficiency of a mixture of zinc OEDF+NTF complexes with methyldiethanolamine, used as an inhibitor of mineral salt accumulation, was studied. It was found that when selecting the components in equivalent amounts, the inhibition efficiency of the composition is at least 90%. The high efficiency of inhibiting mineral salt accumulation in the composition is due to the presence of methyldiethanolamine, alkylimidazoline, and their …

Ir Spectral Analysis Of Broussonetia Papyrefera Plant, Umid Hamroyevich Alamov, Zaytuna Ali Qizi Qurbonaliyeva, Dostonbek Qurbonsho Ugli Shomurodov, Elmurod Abduqodirovich Egamberdiev

Technical science and innovation

in this study, a method for determining the concentration of lignin, cellulose and hemicellulose in plant materials using Fourier-transform IR spectroscopy of Broussonetia papyrefera was developed and tested. The procedure is based on the use of calibration functions that reflect the dependence of the intensity of analytical absorption lines on the concentration of lignin (1512 cm-1) and cellulose (1450 cm-1) in standard samples; indirect correlation was used for hemicellulose. The model samples were ternary mixtures composed of lignin, bacterial cellulose and hemicellulose in different proportions. The proposed method was tested on a wide range of plant biomass samples.

Study Of Technological Parameters On Catalytic Hydroisomerisation Of Aromatic Hydrocarbons Into Alkyl Naphthenic Hydrocarbons, Habibullaeva Mirzaxmatovna Ra'no, Nodira Turobjonovna Torayeva, Temurbek Z. Daminov, Murod Azimovich Eshmukhamedov

Technical science and innovation

The article presents experimental results of the catalytic hydroisomerization of aromatic hydrocarbons into alkyl naphthenic hydrocarbons. Aluminum col-molybdenum with silicon oxides has been studied as a catalytic system, which imparts acidic properties to the catalytic system and stimulates isomerization.

The dehydrogenation reaction of cyclohexane has been studied, which occurs on the active surface of one of the metal oxides to cyclohexene, then the resulting cycloolefin diffuses to the acidic active center - aluminosilicate, where skeletal isomerization occurs and then the isomerized cycloolefin again returns to the active center of the surface of the catalytic system, where it is hydrogenated to …

Investigation Of The Parameters Of Semicylindrical Capacitive Sensor, Erkin Uljaev, Elyor Faxriddinovich Khudoyberdiev, Shohrukh Nurali O‘G‘Li Narzullayev

Chemical Technology, Control and Management

This study introduces a semicylindrical capacitive sensor, featuring an internal dielectric insulator, designed to measure moisture levels in bulk and other materials while in motion. The research employs numerical analysis to explore the sensor's capacitance variation and evaluate its performance. The change in capacitance of the semicylindrical capacitive sensor in the picofarad range is easily converted into a change in the frequency of the generator, which is implemented on an operational amplifier with feedback. The generator circuit is quite compact, and its output can be connected directly to the discrete input of a microcontroller without a matching element. Using the …

Experimental Study Of The Ultrasonic Extraction Process Of Plant Raw Materials, Azamat Bakir Ogli Usenov, Doston Ishmuxammat Ogli Samandarov, Qobil Akmal Ogli Mukhiddinov, Jasur Esirgapovich Safarov Dcs

Chemical Technology, Control and Management

In-depth scientific research is being conducted around the world aimed at developing the scientific and methodological foundations of energy-saving extractors, processing medicinal plants, increasing the efficiency of modern technologies, processes and equipment for obtaining high-quality pharmaceutical raw materials rich in biologically active substances. Energy-saving extractors, developed in conjunction with the extraction process of medicinal plants, are introduced into the industry using scientifically proven technology. At the global level, special attention is paid to the creation of intelligent designs of innovative extraction plants that operate using ultrasonic waves, allowing the extraction of medicinal components of plants.

Clustering Algorithm Based On Similarity Of Objects, Akhram Khasanovich Nishanov, Alisher Tulkunovich Tursunov, Fayzullo Farhod O'G'Li Ollamberganov

Chemical Technology, Control and Management

The article discusses the problem of drug clustering. Initially, k classes are randomly formed and the resulting training sample is preprocessed, then the similarity between objects of each class is assessed based on the proximity function and the criterion for assessing the contribution of objects to the formation of their own class. It is usually expressed as a percentage and represents the degree of mutual similarity of objects of each class. In the next steps of the algorithm, first one object is taken from the first class and by adding it to all k classes, the contribution of this object …

Capacitive Sensors With Ultra-Small Capacitance For Smart Measurement And Control Systems, Rustam Baratov, Farrux Jabbor O'G'Li Ko'charov

Chemical Technology, Control and Management

This article discusses methods of low capacitance measurement of capacitive sensors. The results of the study of the amplitude-frequency (AF) and phase-frequency (PF) response of measurement circuits of capacitive sensors for low capacitances measurement, consisting of RC - differentiating elements are presented. The input and output parameters of the differentiating circuit and the complex transfer function are analyzed. The research results show that low capacitances measurement by measuring the rectangular pulses duration is the most effective measurement method.

Synthesis Of A Control System For A Non-Stationary Dynamic Plant Based On A Regulator-Predictor, Isamiddin Hakimovich Siddikov, Begovot Sheraliyevich Ibragimov

Chemical Technology, Control and Management

The paper considers the issues of synthesizing a predictor controller as part of a control system for a non-stationary dynamic plant with a predictive model. Technological processes in industry, in essence, have non-stationarity properties, the parameters of which can change during the execution of technological operations. To control such nonstationary dynamic control plants, controllers built on the basis of predictive models have found wide application. The article is devoted to the issue of studying automatic control systems of a non-stationary dynamic plant with a base regulator-predictor. To synthesize a regulator - predictor, it is proposed to use a predictive model …

Developing Decision-Making Models And Algorithms To Help Prevent Emergencies, Mizaakbar Xakkulmirzayevich Hudayberdiyev, Oybek Zokirovich Koraboshev

Chemical Technology, Control and Management

The article is devoted to the solution of the scientific issue of decision-making support for the prevention and elimination of the consequences of emergency situations. The relevance of this issue is related to the need to develop a theoretical basis for optimizing the risk of adverse effects on human health and the environment in connection with emergency situations, and a predictive model for the development of emergency situations and their prevention or elimination of their consequences. The optimization of the importance measure of signs for predicting the values of the factors of fire conditions has been carried out. In addition, …

Mathematical Modelling Of The Solar Drying Of Apricot, Sarvar Rejabov, Botir Shukurillayevich Usmonov, Asqar Artikov, Komil Usmanov

Chemical Technology, Control and Management

Agricultural products provide significant growth in export earnings for many countries and provide food globally. Fruits and vegetables are perishable foods due to their high moisture content. Therefore, most agricultural products require post-harvest processing such as drying to extend the shelf life of fruits and vegetables and maintain nutrient quality. Solar drying is widely used for this purpose. Ambient temperature, humidity and solar radiation affect the drying time and quality of agricultural products, especially apricots, in solar dryers. The experiments were carried out in the same place (Tashkent, Uzbekistan) and in the same time interval. When the mass of apricots …

Review Of Fuzzy Models And Fuzzy Methods For Analysis Of Information In Conditions Of Emotional Decision Making, Latafat Gardashova, Royal Shirinov, Diana Boqdanova

Chemical Technology, Control and Management

In the modern world, decision-making often takes place in an environment of uncertainty and under the significant influence of emotional factors, which requires the use of special methods for analyzing information. This study is devoted to an overview of fuzzy models and methods that allow such factors to be taken into account when making decisions. In particular, the approaches based on fuzzy logic, fuzzy cognitive maps and fuzzy clustering methods that provide flexibility and adaptability in conditions of uncertainty are considered. The study analyzes examples of the application of these methods in various fields, including risk management, medical diagnostics and …