Chemical Engineering Commons^™

Arrayed Lyser And Homogenizer Systems With Multiple Agitator Devices, Robert W. Doebler, Mark Brown, Tanya Ferguson, Bruce Irvine, James D. Sterling

Business and Information Technology Faculty Research & Creative Works

Systems and methods for the efficient agitation of tissue samples. A device may include a plurality of chambers that each receives samples therein. The plurality of chambers may be uniformly spaced with respect to a least one dimension, to form a one dimensional or two-dimensional array. Each of the chambers may include an opening and an agitator device in fluid contact with the sample disposed within the chamber. The agitator devices may include a micromotor which provides rotational motion to a shaft and an impeller fixed to the shaft such that the impeller and the shaft rotate together upon provision …

Insights Into Low Salinity Water Flooding, Hasan N. Al-Saedi, Ralph E. Flori, Patrick V. Brady

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In our previous work, we examined the potential of divalent cations (Mg²⁺ and Ca²⁺) in formation water (FW) for low-salinity (LS) EOR effect, where the increase in divalent cations in FW lowered the impact of LS water EOR.

In this paper, we demonstrate the importance of the same divalent cations in the injected water (both FW and LS water). We also try to relate the percentage of the divalent cations in the injected water to that in the FW to engineer the optimum concentration of the injected water and obtain the maximum oil recovery from sandstone reservoirs. …

Effect Of Differences In The Primary Structure Of The A-Chain On The Aggregation Of Insulin Fragments, Paul P. Nakka, Ke Li, Daniel Forciniti

Chemical and Biochemical Engineering Faculty Research & Creative Works

Bovine and human insulin have similar primary structures. In this article, the region of the insulin A-chain of bovine and human insulin where the amino acid composition is different was studied. Bovine insulin fragment (BIF) and human insulin fragment (HIF) were synthesized in solid-phase peptide synthesis. The effects of pH, temperature, urea, ionic strength, and stirring on the formation of fibrils were studied using a fractional factorial resolution III experimental design. Fibrillation was monitored by fluorescence and infrared spectroscopy and optical microscopy. Both fragments formed fibrils at pH 1.6 and a temperature of 60 °C. The lag time and apparent …

Incorporating Germanium Oxide Into The Glass Phase Of Novel Zinc/Magnesium-Based Gpcs Designed For Bone Void Filling: Evaluating Their Physical And Mechanical Properties, Basel A. Khader, Omar Rodriguez, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

The structural role of Germanium (Ge), when substituting for Zinc (Zn) up to 8 mol % in the 0.48SiO₂-0.12CaO-0.36ZnO-0.04MgO glass series, was investigated with respect to both the glass chemistry and also the properties of glass polyalkenoate cements (GPCs) manufactured from them. The Network connectivity (NC) of the glass was calculated to increase from 1.83 to 2.42 with the addition of GeO₂ (0-8 mol %). Differential thermal analysis (DTA) results confirmed an increase in the glass transition temperature (T_g) of the glass series with GeO₂ content. X-ray photoelectron spectroscopy (XPS) showed an increase in …

Microwave-Assisted Synthesis Of Palladium Nanoparticles Supported On Copper Oxide In Aqueous Medium As An Efficient Catalyst For Suzuki Cross-Coupling Reaction, Hany A. Elazab, M. A. Sadek, Tamer T. El-Idreesy

Chemical and Biochemical Engineering Faculty Research & Creative Works

We report here a reliable green method for the synthesis of palladium nanoparticles supported on copper oxide as a highly active and efficient catalyst for Suzuki cross-coupling reaction. The experimental synthetic approach is based on microwave-assisted chemical reduction of an aqueous mixture of palladium and copper salt simultaneously using hydrazine hydrate as reducing agent. The catalyst was fully characterized using various techniques showing well-dispersed palladium nanoparticles. The catalytic activity and recyclability of the prepared catalyst were experimentally explored in the ligand-free Suzuki cross-coupling reaction with a diverse series of functionalized substrates. The synthesized Pd/CuO catalyst shows many advantages beside its …

Significant Improvement In Tio₂ Photocatalytic Activity Through Controllable Zro₂ Deposition, Xiaofeng Wang, Rajankumar L. Patel, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

ZrO₂ was deposited on anatase TiO₂ nanoparticles using 5-80 cycles of atomic layer deposition (ALD). The photocatalytic activity of all samples was evaluated based on the degradation of methylene blue (MB) solution under UV light. The TiO₂ sample with 45 cycles of ZrO₂ deposition (45c-Zr/TiO₂, 1.1 wt% ZrO₂) was proved to be the most efficient catalyst with a degradation kinetic constant 10 times larger than that of the pure TiO₂ sample. All samples were characterized using inductively coupled plasma atomic emission spectroscopy (ICP-AES), nitrogen adsorption-desorption, X-ray diffraction (XRD), transmission electron microscopy …

Software For Peak Finding And Elemental Composition Assignment For Glycosaminoglycan Tandem Mass Spectra, John D. Hogan, Joshua A. Klein, Jiandong Wu, Pradeep Chopra, Geert Jan Boons, Luis Carvalho, Cheng Lin, Joseph Zaia

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glycosaminoglycans (GAGs) Covalently Linked to Proteoglycans (PGs) Are Characterized by Repeating Disaccharide Units and Variable Sulfation Patterns Along the Chain. GAG Length and Sulfation Patterns Impact Disease Etiology, Cellular Signaling, and Structural Support for Cells. We and Others Have Demonstrated the Usefulness of Tandem Mass Spectrometry (MS 2 ) for Assigning the Structures of GAG Saccharides; However, Manual Interpretation of Tandem Mass Spectra is Time-Consuming, So Computational Methods Must Be Employed. in the Proteomics Domain, the Identification of Monoisotopic Peaks and Charge States Relies on Algorithms that Use Averagine, or the Average Building Block of the Compound Class Being Analyzed. …

Synthesis Of Cr, Cu, Ni, And Y-Doped 3d-Printed Zsm-5 Monoliths And Their Catalytic Performance For N-Hexane Cracking, Xin Li, Abdo Alslam Alwakwak, Fateme Rezaei, Ali A. Rownaghi

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this work, chromium, copper, nickel, and yttrium-doped 3D-printed ZSM-5 monoliths were synthesized by doping the ZSM-5 zeolite paste with corresponding metal precursors. The physical and acid properties of the metal-doped 3D-printed ZSM-5 monoliths were systematically characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM), Fourier transform-infrared (FT-IR), N₂ adsorption, temperature programmed reduction of H₂(H₂-TPR), and temperature-programmed desorption of ammonia (NH₃-TPD) techniques. The characterization of bare and metal-doped monoliths confirmed the presence of metal promoters within the zeolite matrix while their MFI frameworks were retained after doping and printing. It …

Laser Vaporization And Controlled Condensation (Lvcc) Of Graphene Supported Pd/Fe3o4 Nanoparticles As An Efficient Magnetic Catalysts For Suzuki Cross – Coupling, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

Herein, a reproducible, reliable, and efficient method was reported for the synthesis of palladium nanoparticles dispersed on a composite of Fe₃O₄ and graphene (Pd-Fe₃O₄/G) as a highly efficient active catalyst for being used in Suzuki cross–coupling reactions. Graphene supported Pd/Fe₃O₄ nanoparticles (Pd-Fe₃O₄/G) exhibit a remarkable catalytic performance towards Suzuki coupling reactions. Moreover, the prepared catalyst could be recycled for up to three times with high catalytic activity. The catalyst was prepared using LVCC synthesis; the prepared catalyst is highly magnetic which provides a platform to facilitate …

The Catalytic Activity Of Copper Oxide Nanoparticles Towards Carbon Monoxide Oxidation Catalysis: Microwave – Assisted Synthesis Approach, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this research, we report a simple, versatile, and reproducible method for the synthesis of copper oxide nanoparticles via microwave assisted synthesis approach. The important advantage of this catalyst is due to its important role not only in the low temperature oxidation of CO but also in potential applications in pharmaceutical and fine chemical synthesis. The results reveal that the copper oxide catalyst has particularly a remarkable high activity for CO oxidation catalysis as it was found that copper oxide (CuO) catalyst has 100% conversion of carbon monoxide into carbon dioxide at 175 oC. This also could be attributed to …

High Efficiency, High Performance Metal-Organic Framework (Mof) Membranes In Hollow Fibers And Tubular Modules, Sankar Nair, Kiwon Eum, Christopher W. Jones, Ali A. Rownaghi

Chemical and Biochemical Engineering Faculty Research & Creative Works

A reactor cell for measuring gas and liquid permeation is disclosed. A hollow fiber is supported by and sealed into a first hole and a second hole of the reactor module. The first and second ends of the hollow fiber are sealed with a sealing solution. Methods for making and using the reactor cell are also disclosed. As made and used, the reactor cell further comprises a molecular sieving membrane that is uniform and free of defects grown on an inner bore surface of the hollow fiber.

Negative Electron Transfer Dissociation Sequencing Of 3-O-Sulfation-Containing Heparan Sulfate Oligosaccharides, Jiandong Wu, Juan Wei, John D. Hogan, Pradeep Chopra, Apoorva Joshi, Weigang Lu, Joshua Klein, Geert Jan Boons, Cheng Lin, Joseph Zaia

Chemical and Biochemical Engineering Faculty Research & Creative Works

Among Dissociation Methods, Negative Electron Transfer Dissociation (NETD) Has Been Proven the Most Useful for Glycosaminoglycan (GAG) Sequencing Because It Produces Informative Fragmentation, a Low Degree of Sulfate Losses, High Sensitivity, and Translatability to Multiple Instrument Types. the Challenge, However, is to Distinguish Positional Sulfation. in Particular, NETD Has Been Reported to Fail to Differentiate 4-O- Versus 6-O-Sulfation in Chondroitin Sulfate Decasaccharide. This Raised the Concern of Whether NETD is Able to Differentiate the Rare 3-O-Sulfation from Predominant 6-O-Sulfation in Heparan Sulfate (HS) Oligosaccharides. Here, We Report that NETD Generates Highly Informative Spectra that Differentiate Sites of O-Sulfation on Glucosamine …

The Effect Of Wellbore Circulation On Building An Lcm Bridge At The Fracture Aperture, Ghassan Alshubbar, Runar Nygaard, Montri Jeennakorn

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Different laboratory experimental setups with slotted disks, simulating fractures' apertures, have been used extensively to formulate effective loss circulation materials (LCM) recipes. The amount of fluid loss and sealing pressure have been used as the evaluation criteria. The question still remains is how valuable these tests are when LCM fluids are circulated in the wellbore to stop losses. The main objective of this work is to study the effect of the annular fluid flow on building an LCM bridge at the fracture aperture. To address the objective, a fluid loss apparatus has been developed to mimic wellbore circulation. Tapered slotted …

Poly- L -Lactic Acid- Co-Poly(Pentadecalactone) Electrospun Fibers Result In Greater Neurite Outgrowth Of Chick Dorsal Root Ganglia In Vitro Compared To Poly- L -Lactic Acid Fibers, Alexis M. Ziemba, Keith P. Lane, Ignacio M. San Segundo, Anthony R. D'Amato, Andrew K. Mason, Ryan J. Sexton, Hubert Casajus, Richard A. Gross, David T. Corr, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Electro spun poly-l-lactic acid (PLLA) fiber scaffolds are used to direct axonal extension in neural engineering models. We aimed to improve the efficacy of these fibers in promoting neurite outgrowth by altering surface topography and reducing fiber elastic modulus through the incorporation of a compatibilized blend, poly-l-lactic acid-poly(pentadecalactone) (PLLA-PPDL) into the solution prior to electrospinning. PLLA+PLLA-PPDL fibers had a larger diameter, increased surface nano topography, and lower glass transition temperature than PLLA fibers but had similar mechanical properties. Increases in neurite outgrowth on PLLA+PLLA-PPDL fibers were observed, potentially due to the significantly increased diameter and surface coverage with nano topography. …

Biodegradation Of Phenolic Components In Wastewater By Micro Algae: A Review, Muthanna H. Al-Dahhan, Faris Hammoodi Al-Ani, Adaf Jadaan Obaied Al-Saned

Chemical and Biochemical Engineering Faculty Research & Creative Works

The biodegradation of phenolic contaminant present in wastewater by micro algae has been investigated in the current research. The study focused on algae growth requirements and factors affecting algae growth in contaminated water leading to the best treatment. Different techniques used to functionalize microalgae in the treatment such as batch and continuous operation modes have been further investigated. Mechanisms for microalgae pollutants degradation and microalgae growth kinetics were also highlighted to present the required knowledge in phenol contaminant biodegradation field by microorganisms.

Comparison Between Cold/Hot Smart Water Flooding In Sandstone Reservoirs, Hasan N. Al-Saedi, Ariel Williams, Ralph E. Flori

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The incremental oil recovery has been investigated and approved by many laboratory and field projects using water flooding in tertiary stage. The salinity of the injected water is an important factor observed by many researchers. The more salinity decreases the more oil recovery obtained. The investigations on the hot low salinity water flooding have been conducted by many researchers and they found out that it is useful for increasing oil recovery especially heavy oil due to reducing oil viscosity and make it easy to produce to the surface. The thermal expansion of water plays an important role in the incremental …

Development Of A Novel Bioactive Glass Suitable For Osteosarcoma-Related Bone Grafts, Alireza Rahimnejad Yazdi, Lawrence Torkan, Stephen D. Waldman, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this study, zinc borate-based glasses with increasing gallium content (0, 2.5, 5, 10, and 15 wt % Ga) were synthesized and their effect on the viability and proliferation of preosteoblasts and osteosarcoma cancer cells were investigated. Methyl thiazolyl tetrazolium (MTT) cell viability assays using glass degradation extracts revealed that the extracts from glasses with lower Ga contents could enhance the viability of preosteoblasts, while extracts from the glass composition with 15 wt % Ga caused statistically significant reduction of their viability. MTT cell viability assays using the extracts and osteosarcoma cells showed that only extracts from the glass composition …

The Effect Of Incorporating Different Concentrations Of Chlorhexidine Digluconate On The Degree Of Conversion Of An Experimental Adhesive Resin, Lamiaa Mahmoud Moharam, Haidy Nabil Salem, Hanaa Mahmoud Elgamily

Chemical and Biochemical Engineering Faculty Research & Creative Works

Background: The aim of this study was to evaluate the effect of chlorhexidine digluconate incorporation on the degree of conversion of an experimental adhesive resin. Material and methods: The experimental resin was prepared from 70 wt.% bisphenol A glycerolate dimethacrylate, 30 wt.% hydroxyethyl methacrylate, silanized SiO₂ nanofillers, 0.5% of camphorquinone and ethyl 4-dimethylaminebenzoate (binary photo-initiator system). Five chlorhexidine digluconate concentrations (0, 0.5, 1, 2 and 4 wt%) were then incorporated into the experimental resin. Thirty Potassium Bromide pellets were prepared then divided into six groups (n=5/group), representing the tested adhesive resins (Single Bond 2, 0, 0.5, 1, 2 and …

Systems And Methods For Endotoxin Removal From Fluids, Sutapa Barua

Chemical and Biochemical Engineering Faculty Research & Creative Works

Systems and methods are provided for the removal of endotoxins from fluids. The methods can include the use of polymeric nanoparticles for binding endotoxins present in a fluid. The polymeric nanoparticles can be associated with a support member. The polymeric nanoparticles can have an endotoxin removal capacity of at least 1×10⁹ endotoxin units per gram of polymeric nanoparticle (EU/g) and/or a removal efficacy per unit surface area of the polymeric nanoparticles of at least 1×10⁶ EU/cm².

System, Devices And Methods For Molecular Separation, Sankar Nair, Christopher W. Jones, Fereshteh Rashidi, Ali A. Rownaghi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Systems, devices and methods for molecular separation including a molecular separation device comprising at least a polycrystalline metal-organic framework (MOF) and a nanocrystalline, zeolite MFI, wherein the MOF forms a polycrystalline membrane with zeolite MFI nanoparticles dispersed therein, and the MOF membrane matrix contacting and surrounding the zeolite MFI nanoparticles form a permselective nanoporous structure.

A Continuum Model Of Mucosa With Glycan-Ion Pairing, James D. Sterling, Shenda M. Baker

Business and Information Technology Faculty Research & Creative Works

Advances in the study of glycosoaminoglycan biohydrogels, label-free electrokinetic analysis of soft-diffuse layers in contact with saline solutions, and elucidation of ion-specific behavior in many biochemical systems offer the opportunity to marry these principal features in a new mathematical model of the mucosal glycocalyx. The model is based on the electroquasistatic subset of Maxwell's equations in the form of the steady-state continuum Poisson–Boltzmann equation for electrostatics with explicit incorporation of pairwise binding of ions to fixed charged-groups in the hydrogel. The pairwise association is modeled using reversible bimolecular reactions via stoichiometric dissociation constants that represent the rule of matching water …

The Effect Of Mg²⁺ Incorporation Into The Glass Phase Of Zinc-Based Glass Polyalkenoate Cements, Basel A. Khader, Omar Rodriguez, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

The suitability of glass polyalkenoate cements (GPCs) as injectable adhesives in orthopedics have been compromised by the presence of aluminum (Al), a component in the glass phase of all commercial GPCs. There has been considerable work on the development of Al-free GPCs which can be formulated based on calcium (Ca) zinc (Zn) silicate (Si) glasses. These materials, in terms of biocompatibility and mechanical properties, have potential for orthopedics. However, many of these experimental Al-free GPCs have setting times shorter than 60 s, restricting clinical applications. Here, the authors incorporate Magnesium (Mg) into the glass phase of Al-free GPCs in an …

The Effect Of Weak Confinement On The Orientation Of Nanorods Under Shear Flows, Saman Monjezi, James D. Jones, Alyssa K. Nelson, Joontaek Park

Chemical and Biochemical Engineering Faculty Research & Creative Works

We performed a numerical analysis to study the orientation distribution of a dilute suspension of thin, rigid, rod-like nanoparticles under shearing flow near a solid boundary of weak confinement. Brownian dynamics simulation of a rod was performed under various ratios of shear rate and rod diffusivity (Peclet number), as well as the center-of-mass position (wall confinement). We discuss the effects of Peclet number and wall confinement on the angle distributions, Jeffery orbit distribution and average orientation moments. The average orientation moments, obtained as a function of Peclet number and wall confinement, can be used to improve a previous shear-induced migration …

Injectable Glass Polyalkenoate Cements: Evaluation Of Their Rheological And Mechanical Properties With And Without The Incorporation Of Lidocaine Hydrochloride, P. Niranjan, A. Alhalawani, S. Phull, I. Beniluz, B. Krishnan, P. Zalzal, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Lidocaine hydrochloride is used as an anesthetic in many clinical applications. This short communication investigates the effect of complete substitution of lidocaine hydrochloride for deionized (DI) water on the physico-chemical properties of two novel glass polyalkenoate cements. Substituting DI water with lidocaine hydrochloride resulted in cements with shorter working times but comparable setting times and mechanical properties. Fourier transform infrared spectroscopy confirmed that the setting reaction in cements containing DI water and lidocaine hydrochloride was completed within 24 h, post cement preparation and maturation. Further, it was explained that lidocaine hydrochloride binds to poly(acrylic) acid (PAA) due to electrostatic forces …

Raman Spectroscopy Predicts The Link Between Claw Keratin And Bone Collagen Structure In A Rodent Model Of Oestrogen Deficiency, M. Clare Caraher, Antonia Sophocleous, J. Renwick Beattie, Olive O'Driscoll, Niamh M. Cummins, Orlaith Brennan, Fergal J. O'Brien, Stuart H. Ralston, Steven E.J. Bell, Mark R. Towler, Aymen I. Idris

Chemical and Biochemical Engineering Faculty Research & Creative Works

Osteoporosis is a common disease characterized by reduced bone mass and an increased risk of fragility fractures. Low bone mineral density is known to significantly increase the risk of osteoporotic fractures; however, the majority of non-traumatic fractures occur in individuals with a bone mineral density too high to be classified as osteoporotic. Therefore, there is an urgent need to investigate aspects of bone health, other than bone mass, that can predict the risk of fracture. Here, we successfully predicted association between bone collagen and nail keratin in relation to bone loss due to oestrogen deficiency using Raman spectroscopy. Raman signal …

Specific Nanoporous Geometries On Anodized Alumina Surfaces Influence Astrocyte Adhesion And Glial Fibrillary Acidic Protein Immunoreactivity Levels, D. Ganguly, C. D.L. Johnson, M. K. Gottipati, D. Rende, D. A. Borca-Tasciuc, R. J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Electrodes implanted in the brain or spinal cord trigger the activation of resident astrocytes. In their reactive state, astrocytes surrounding the electrode form a glial scar, compromising the ability of the electrode to interface with the surrounding neural tissue. One approach to reduce the inhibiting scar tissue is to incorporate nanoarchitecture on the surface of the implanted materials to modify the astrocytic response. The incorporated nanoarchitecture changes both the surface characteristics and the material properties of the implant interface. We investigated the response of rat cortical astrocytes to nanoporous anodic aluminum oxide (AAO) surfaces. Astrocytes were seeded onto nonporous aluminum …

Atomic Layer Deposition Prepared Nanostructured Materials For Various Catalytic Reactions, Xiaofeng Wang

Doctoral Dissertations

"Atomic layer deposition (ALD) has been widely used for thin film coating and metal nanoparticles (NPs) preparation. In this report, the applications of ALD prepared nanostructured materials in catalysis were examined.

Highly dispersed Pt monometallic catalysts with different substrates and multi-walled carbon nanotubes (MWCNTs) supported Pt-Co bimetallic catalysts were synthesized by ALD for selective hydrogenation of α, β-unsaturated aldehydes to unsaturated alcohols (UA). Pt/MWCNTs showed the highest selectivity of UA in selective hydrogenation of citral, as compared to Pt/SiO₂, Pt/ALD-Al₂O₃, and Pt/γ-Al₂O₃. After adding Co, the highest selectivity was achieved …

Synthesis And Comprehensive Studies Of Nanogels For Enhanced Oil Recovery, Jiaming Geng

Doctoral Dissertations

“Nanomaterials have been developed and applied for enhanced oil recovery (EOR) in oil industry. Among the developed nanomaterials, nano-sized crosslinked polymeric gel particles (nanogels) have shown the potential in improving both the macro- and micro-displacing efficiency. This dissertation focuses on the synthesis and the potential EOR mechanisms of nanogels. Nanogels with positive, negative, and neutral charges were synthesized through suspension polymerization. The morphology, size distribution, and zeta potential of nanogels were elucidated by corresponding technologies, such as scanning electron microscopy and dynamic light scattering. The ability of nanogels in oil-water interfacial tension (IFT) reduction and oil-in-water (o/w) emulsion stabilization was …

Engineering Polymeric Hollow Fiber Membrane Reactors For Sustainable Chemical Transformation Reactions, Yingxin He

Doctoral Dissertations

“Over the past decade, laboratory-scale continuous-flow processes have witnessed explosive developments and have attracted a great deal of interest with respect to the significance of the economic and environmentally-sustainable production of pharmaceuticals, fine chemicals, and agrochemicals, as well as upgrading of biomass feedstocks. Immobilization of organocatalysts and metal nanoparticles on continuous-flow microreactors offers an efficient catalytic system that exploits and enhances the advantages of both nanocatalysis and flow chemistry, the so-called flow nanocatalysis approach. Various approaches have been developed for the development of continuous-flow reactions including immobilization and subsequent anchoring of organocatalysts and metal nanoparticles within microfluidic reactors. However, many …

Enhancement Of Heat Transfer Coefficient Using Nanofluids For Multi-Stage Flash Desalination (Msf) Plant, Nasser Zouli

Doctoral Dissertations

“The enhancement of thermal conductivity and local heat transfer coefficient, under laminar and turbulent flow regimes, of water-based spherical Al₂O₃, CuO, and Fe₂O₃ nanofluids have been experimentally investigated for the improvement of the thermal desalination processes using a newly developed sophisticated noninvasive heat transfer coefficient probe that is flush mounted on the inner wall surface of the test section. The nanoparticles have been selected because of their superior thermal conductivity and low cost, as well as the magnetic characteristic of Fe₂O₃ nanoparticle since a magnet can collect it and reuse. …