Chemical Engineering Commons^™

Engineering Zeolite Catalysts Through Porosity And Surface Acidity Control For Selective Production Of Light Olefins, Xin Li

Doctoral Dissertations

"Zeolites are broadly used as heterogeneous catalysts in various chemical and petrochemical industries to produce value-added chemicals and fuels, mainly due to their large surface area, acid-base properties, high thermal stability, and excellent shape-selectivity. In this dissertation, various zeolite catalysts were engineered through fine-tuning micro-meso-macro-porosity and surface acidity. The engineered zeolites were used as heterogeneous catalysts for production of light olefins such as ethylene and propylene through alcohol dehydration and hydrocarbon cracking reactions.

To control the zeolite porosity and acidity, SAPO-34@ZSM-5 and SAPO-34@Silicalite-1 composites with core-shell structure were synthesized and evaluated in ethanol dehydration reaction. Analysis of catalytic performance revealed …

Comprehensive Evaluation Of A Novel Eor Method-Coupling Low Salinity Water Flooding And Preformed Particle Gel To Enhance Oil Recovery In Fractured Reservoirs, Ali K. Alhuraishawy

Doctoral Dissertations

"Excess water production in oil fields is becoming a challenging economic and environmental problem as more reservoirs are maturing. Water channeling, one of the primary reservoir conformance problems, is caused by reservoir heterogeneities that lead to the development of high-permeability streaks. The recovery of oil from carbonate reservoirs is usually low due to their extreme heterogeneity caused by natural fractures and the nature of oil-wet matrix. Also, oil recovery from fractured sandstone reservoirs is often low due to areal heterogeneity. Gel treatments have proven to be a successful and inexpensive fluid diversion method when used to plug the thief zones …

Hydrodynamics Study Of The Bubble Columns With Intense Vertical Heat-Exchanging Tubes Using Gamma-Ray Computed Tomography And Radioactive Particle Tracking Techniques, Abbas Jawad Sultan

Doctoral Dissertations

"Understanding the hydrodynamics of bubble columns with and without vertical heat-exchanging tubes is a necessity for the proper design, scale-up, and operation of these reactors. To achieve this goal, systematic experiments were performed to visualize and quantify the influence of the presence of vertical internal tubes on the gas holdup distributions and their profiles, axial liquid velocity, and turbulent parameters (i.e., normal and shear stresses; turbulent kinetic energy) by using advanced gamma-ray computed tomography (CT) and radioactive particle tracking (RPT). In this study, the experiments were conducted in 6- and 18-inch bubble columns with an air-water system as the working …

Experimental And Numerical Investigation On Tar Production And Recycling In Fixed Bed Biomass Gasifiers, Jia Yu

Doctoral Dissertations

"Bioenergy has been utilized for domestic purposes since pre-recorded history and it catches the highlight in the recent decades because it naturally benefits the world climate and energy security. Gasification is one of the key technologies to efficiently and economically convert biomass into syngas and further into biofuels. Despite these outstanding advantages, biomass gasification suffers from the formation of unfavorable byproduct tar and the consequential tar elimination. Moreover, the collected tar is toxic and thus requires storage and strict deposit method to avoid environmental pollution.

To understand the mechanisms of biomass gasification and tar production, simulations with Aspen Plus were …

Computational Design And Numerical Analyses Of Thermal-Hydraulics In A Pwr-Type Small Modular Nuclear Reactor, Vivek Murlidhar Rao

Doctoral Dissertations

"This dissertation focuses on computational design of a PWR-type small modular nuclear reactor (SMR), and analysis of coolant thermal-hydraulics during steady-state operation. Physical design of the SMR is based on the existing AP-1000 and Small Modular Reactor designs by Westinghouse Nuclear.

The first paper discusses a two-stage simulation of turbulent flow in the lower plenum of the RPV. In the first stage, four time-dependent Reynolds-Averaged Navier-Stokes (RANS) based turbulence models were used to simulate turbulent flow, compare predictions and identify an appropriate turbulence model. In the second stage, the selected turbulence model was once again used to simulate flow on …

Limiting Key Drilling Parameters To Control Mud Losses In Basra's Oil Fields, Iraq, Abo Taleb Tuama Al-Hameedi

Doctoral Dissertations

"Wells in Basra's oil fields are highly susceptible to lost circulation problems when drilling through the Dammam, Hartha, and Shuaiba formations. Drilling engineers are challenged to select the optimum value for key drilling parameters such as ECD, Yp, MW, WOB, ROP, and RPM to mitigate mud losses in these formations. Many of these drilling parameters are inter-related and the overall impact of changing key parameters require extensive drilling experience and study. A multi-regression analysis was performed on mud loss event data for more than 300 wells drilled in Basra's oil fields. From this analysis, a model was developed to predict …

Carbon Black Production, Analyzing And Characterization, Shadha Khalid Jebur

Masters Theses

"Carbon black (CB) plays a significant function in the development of the electrical and mechanical properties of high performance for a tough elastic polymeric substance such as rubber materials. Thus, CB is widely used to manufacture a massive number of products such as reinforcing and pigment phase in automobile tires due to its high ability to increase tire life by reducing the thermal damage. This material is also used in belts, hoses, and other non-tire rubber goods. Before use in valuable materials. CB should first be analyzed and characterized by different instruments to obtain its mechanical properties. A new thermal …

Ceria Nanostructured Catalysts For Conversion Of Methanol And Carbon Dioxide To Dimethyl Carbonate, Jawad Hassan A Al Drwish

Masters Theses

"In this study, three different shapes of ceria (CeO₂) nanostructures (e.g., nanooctahedra, nanocubes and nanorods) were synthesized via the hydrothermal method and screened for carbonylation reaction. Of these three shapes of nanostructures, the nanorod was doped with metals such as Ca, Ni, Cu, and Co by wet impregnation method. All materials were characterized by XRD, NH₃/CO₂-TPD, XRF, FTIR and N₂ physorption to determine the crystal size and phases, acid-base properties, metal loading, and surface properties. The obtained materials were employed as catalysts for the activation of Carbon Dioxide (CO₂) and methanol …

Fluid Flow In A Krogh Cylinder: A Model For A Single Capillary And Surrounding Tissue, Xianjie Qiu

Masters Theses

"A model describing the flow of plasma from the capillaries to the interstitial space in the extravascular tissue and back into the capillaries is constructed and solved. The flow through the tissue or the interstitial spaces is described by the Brinkman equation for porous medium, modified to account for the presence of cells considered as spheres. The flow of blood through the capillaries is considered to be that of a Newtonian fluid. The flow between capillary and tissue is coupled by the permeability of the capillary wall. The nature of flow and its magnitude was found to be highly dependent …

Monobore Completion Design: Classification, Applications, Benefits And Limitations, Anwar Khaled Al-Fadhli

Masters Theses

"A monobore completion is a simple completion design that uses the same internal diameter from the bottom of the well to surface. This may be accomplished by cementing a string of casing in a well, or by having tubing stabbed into a polished bore receptacle on a casing liner the same size as the tubing. Monobore completions have been applied extensively in oil and gas fields around the world, both onshore and offshore, from very low reservoir flow to extremely high production rates, since the late 1980s. They have proven beneficial due to their simplicity and cost savings. This study …

Effect Of Variation Of Parameters On Biogas Production Using Aspen Plus & Dynamic Simulation Using Mimic, Shruti Shrikant Karambelkar

Masters Theses

"Design and management for Biogas production have gained significance in growing dependency on Renewable energy resources. This would need a detailed information on steady state and dynamic behavior of systems. In order to make this process environmentally ecofriendly, its needs a lot of improvisation on process simulation. Anaerobic digestion helps treat this inefficient water to be converted into water fit for effluent purposes.

Byproducts contain consists of organic, inorganic and wastes which lead to a high COD content and thus, cannot be discarded into the outlets. The anaerobic digestion process. A study of these effects with simulation need to be …

New Wellbore-Integrity Classification For Gas Migration Problems And New Cement Formulations Using Graphene Nano Platelets To Prevent Gas Migration Through Cement, Mohammed Mousa M. Alkhamis

Masters Theses

"Gas migration, one of the primary problems related to the integrity of oil wells, is caused by cement failures. Gas migration can result in costly well repairs and may endanger personal, equipment, and result in severe operational difficulties and environmental issues. The ultimate objectives of this research were to provide a comprehensive review of the problem and to provide a solution to the problem using Graphene Nano Platelets (GNPs).

An intensive review was performed to understand the cement failures. The reasons behind these failures were analyzed and classified with respect to their locations in the wellbore. Recommendations and potential solutions …

Recycling Effect In Expanded Granular Sludge Bed Reactor And Implementation Of Six Sigma In A Methane Generation Process, Manohar Manchenahalli Shivashankaraiah

Masters Theses

"Brewery industries are the largest consumers of water among several production industries. Despite consuming these huge amounts of water and electricity, they generate by-products that are harmful to the environment. These by-products contain organic, inorganic, and solid wastes with high chemical oxygen demand (COD) strength. The anaerobic digestion (AD) process plays an important role in treating this wastewater. This study investigates the design and development of an expanded granular sludge bed reactor (EGSB) effluent recirculation, which can achieve high COD removal efficiency of the wastewater and enhance the efficiency of generating biogas with high yields and increases in the concentration …

Numerical Simulation Study Of Factors Affecting Production Well Gel Treatment Using Linear Models With Crossflow, Kewei Shi

Masters Theses

"Conformance control is an inevitable topic related to water-flooding. Polymer gel has been proved to enhance oil recovery by blocking the existing water-breakthrough channels. Water that is injected subsequently will be directed to the unswept portion of the reservoir, replacing part of the remaining oil and increasing the oil-recovery factor. Prior to pilot tests of polymer gel treatment, laboratory experiments and numerical simulations are used to design the tests. Understanding physical meanings of key parameters that affect polymer gel treatment and relating the parameters from lab data and the simulator benefit field operation design.

This thesis study tries to evaluate …

Cellular Hitchhiking Via Injectable Microparticles, Daniel Smith

Masters Theses

"Tissue engineering is a process of developing new tissues in a host. Tissue engineering draws upon revitalizing damaged tissues that otherwise would not heal completely from the body's natural response. To augment the body's natural response to impairment, cells can be transplanted to the afflicted area to boost the healing response. Implementing these cells onto scaffolds and transplanting them into the body improves the healing response dramatically. Tissue regeneration improves when a biodegradable scaffold is used in conjunction with cells to augment the body's healing response. Microparticles provide a surface that can mimic the environment cells perceive in vivo, …

The Development Of A New Formulation Of Fly Ash Class C Based Geopolymer And Assessing Its Performance In Presence Of Drilling Fluid Contamination, Mohamed Saad Ahdaya

Masters Theses

"Cementing is one of the most critical steps in the drilling and completion of oil wells. Traditionally, Portland cement is used for oil cementing operations; however, geopolymer materials have recently attracted much attention because they are more cost-effective and have less environmental impacts.

An intensive laboratory work was conducted to obtain a new formulation of fly ash class C based geopolymer cement to be used as a potential alternative cementing material to Portland cement in oil and gas cementing. Twenty-four variations of fly ash class C based geopolymers were prepared, and by comparing several of their properties using API standard …

New Nanoparticle Water-Based Drilling Fluid Formulation With Enhanced Thermal Stability And Inhibition Capabilities In The Woodford Shale, Jose Aramendiz Pacheco

Masters Theses

"Drilling fluid design for unconventional reservoirs aims at preventing formation instability problems associated with fluid invasion, shale swelling, and cuttings dispersion. Although oil-based mud (OBM) can be used to achieve these goals, environmental and economic concerns limit its application. This experimental study evaluated the potential use of nanoparticles (NP) to improve water-based mud (WBM) inhibition capabilities and its ability to enhance the overall drilling fluid thermal stability while providing a cleaner technology to the industry.

Characterization of Woodford shale was completed with X-ray diffraction, cation exchange capacity, and scanning electron microscopy, silica, and graphene NP were characterized with aqueous stability …

Investigation Of Proppant Static Settling Velocity In Hydraulic Fractures Using Viscoelastic Linear Gel, Vismay Manishbhai Shah

Masters Theses

"Few studies have quantified proppant transport in static conditions using actual proppant and validated previously established correlation. The objective of this study is to investigate the rheological properties of the linear gel, and determine the effect of size, shape and specific gravity of the proppant, fracture walls and rheological properties of the fluid on the proppant settling velocity in static condition and validate the previously established correlation.

Shear viscosity and dynamic frequency sweep tests were performed to investigate the viscous and viscoelastic behaviour of the HPG linear gel with five different concentrations. Proppant settling experiments were conducted with different proppant …

Conical Folds -- An Artifact Of Using Simple Geometric Shapes To Describe A Complex Geologic Structure, Avery Joseph Welker

Masters Theses

"Accurate representation of the 3D shapes of natural folds is essential to characterization of the dynamic models for fold formation. Geometrical analysis of folds commonly relies upon analyzing patterns defined by the variation in the orientation of poles to planar surfaces deformed by a shortening event when plotted using graphical calculators (e.g., stereogram, polar tangent diagrams) to interpret the shape of folds. Stereograms for which orientation data define small circles are classified as non-cylindrical regular folds and are interpreted as "conical folds," where the shape of the fold is represented by a cone that terminates at a point. Utilizing similar …

Characterization Of Free-Radical Solution Polymerizations Of Acrylamide Initiated By Persulfate Initiator Systems, Yashu Chen

Masters Theses

”In order to reduce the water production and improve the oil recovery of mature reservoir, various conformance control technologies have been extensively developed. Preformed particle gel (PPG), a cost-effective plugging agent, has been successfully applied to block the high permeability zone and thus to displace the water to up-swept zone.

A common PPG based on polyacrylamide hydrogel have been wildly used. Identifying the parameters that affect gelation performance and understand how these parameters affect the performance is very useful to predict and manipulate the gelation time and to control the performance of gels.

The objective of this research is to …

A Constitutive Model For Entangled Polydisperse Linear Flexible Polymers With Entanglement Dynamics And A Configuration Dependent Friction Coefficient. Part I: Model Derivation, David W. Mead, Saman Monjezi, Joontaek Park

Chemical and Biochemical Engineering Faculty Research & Creative Works

A new polydisperse "toy" constitutive model is derived and developed from fundamental principles and ideas governing the nonlinear rheology of linear flexible polymers [Mead et al., J. Rheol. 59, 335-363 (2015)]. Specifically, the new model is comprised of four fundamental pieces. First, the model contains a simple differential description of the entanglement dynamics of discrete entanglement pairs. Second, the model contains a differential description of the ij entanglement pair orientation tensor dynamics. Third, following a similar development by Mead and Mishler [J. Non-Newtonian Fluid Mech. 197, 61-79 and 80-90 (2013).], a diluted stretch tube is constructed to describe the relative …

Characterization Of The Cylinderical Split Internal-Loop Photobioreactor With Scenedesmus Microalgae: Advanced Culturing, Modeling, And Hydrodynamics, Laith S. Sabri

Doctoral Dissertations

"Microalgae are fast growing photoynthetic microorganisms and it have very wide range of industrial applications such as biofuels and wastewater treatment. These cells can be grown in a wide variety of systems ranging from open culture systems (e.g., ponds) to closed culture systems of photobioreactor (e.g., airlift). The open culture systems exist in the external environment, and hence, are not intrinsically controllable. However, the microalgae production in enclosed photobioreactors faces prohibitively high production costs with special difficulty in reactor design and scale-up. The light availability and utilization efficiency in the photobioreactor in terms of design and scale-up consider as the …

The Impact Of Gallium Content On Degradation, Bioactivity, And Antibacterial Potency Of Zinc Borate Bioactive Glass, Alireza Rahimnejad Yazdi, Lawrence Torkan, Wendy Stone, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Zinc borate glasses with increasing gallium content (0, 2.5, 5, 10, and 15 Wt % Ga) were synthesized and their degradation, bioactivity in simulated body fluid (SBF), and antibacterial properties were investigated. ICP measurements showed that increased gallium content in the glass resulted in increased gallium ion release and decreased release of other ions. Degradability declined with the addition of gallium, indicating the formation of more symmetric BO₃ units with three bridging oxygens and asymmetric BO₃ units with two bridging oxygens in the glass network as the gallium content in the series increased. The formation of amorphous Ca-P …

A Constitutive Model For Entangled Polydisperse Linear Flexible Polymers With Entanglement Dynamics And A Configuration Dependent Friction Coefficient. Part Ii. Modeling "Shear Modification" Following Cessation Of Fast Shear Flows, David W. Mead, Saman Monjezi, Joontaek Park

Chemical and Biochemical Engineering Faculty Research & Creative Works

The polydisperse Mead-Park (MP) "toy" molecular constitutive model developed in Paper I [Mead et al., J. Rheol. 62, 121-134 (2017)] as well as our previously published work [e.g., J. Rheol. 59, 335-363 (2015)] is used in the "forward" direction to study model polydisperse melts of entangled linear flexible polymers in severe, fast shear flows. The properties of our new model are elucidated by way of numerical simulation of a representative model polydisperse polymer melt in step shear rate and interrupted shear flow. In particular, we demonstrate how the MP model simulates the individual molecular weight distribution (MWD) component dynamics as …

A Proactive Drilling System To Prevent Stuck Pipe And Differential Sticking, Ethar H. K. Alkamil

Doctoral Dissertations

"During drilling operations for the E oilfield in the Mishrif formation in southern Iraq, stuck pipe and differential sticking have been identified as significant geomechanical and drilling problems for several deviated wells. In this work, an integrated approach with three phases is presented to serve as a proactive geo-drilling system to prevent wellbore instability. In the first phase, a comprehensive geomechanical assessment of the Mishrif formation has been carried out to evaluate the in-situ stresses, maximum horizontal stress orientation, pore pressure, rock properties, and rock strength parameters. Moreover, the geomechanical evaluation has been incorporated into the mud design using three …

Geomechanical Characterizations And Correlations To Reduce Uncertainties Of Carbonate Reservoir Analysis, Farqad Hadi

Doctoral Dissertations

"Although carbonate reservoirs hold a wealth of hydrocarbon, they are among the most difficult types of reservoirs to be characterized. Carbonate reservoirs by nature have complex depositional environments and diagenetic processes in which brittle, ductile, fractured rocks, and vugular pores may all exist within small interval. This huge variance in the rock mechanical properties can cause challenges in the reservoir's development, especially in applications related to geomechanics.

The main objective of this research is to geomechanically characterize and correlate the carbonate mechanical properties with their petrophysical properties. A comprehensive review for the geomechanical-petrophysical properties of carbonates was conducted from previous …

Integrated Study On The Applicability Of Co₂-Eor In Unconventional Liquids Rich Reservoirs, Dheiaa Khafief Khashan Alfarge

Doctoral Dissertations

"Unconventional Liquids Rich Reservoirs (ULR) such as Bakken, Niobrara, and Eagle Ford have become the main target for oil and gas investors as conventional formations started to deplete and diminish in number. These unconventional plays have a huge oil reserve; however, the predicted primary oil recovery is still low as an average of 7.5 %. Unconventional Improved Oil Recovery (UIOR) techniques are still a new concept in the oil industry because there is no commercial project for any IOR technique so far. Injecting carbon dioxide (CO₂) might be the most potential strategy to improve oil recovery in such complex plays. …

Study Of Gas Production From Shale Reservoirs With Multi-Stage Hydraulic Fracturing Horizontal Well Considering Multiple Transport Mechanisms, Chaohua Guo, Mingzhen Wei, Hong Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Development of unconventional shale gas reservoirs (SGRs) has been boosted by the advancements in two key technologies: horizontal drilling and multi-stage hydraulic fracturing. A large number of multi-stage fractured horizontal wells (MsFHW) have been drilled to enhance reservoir production performance. Gas flow in SGRs is a multi-mechanism process, including: desorption, diffusion, and non-Darcy flow. The productivity of the SGRs with MsFHW is influenced by both reservoir conditions and hydraulic fracture properties. However, rare simulation work has been conducted for multi-stage hydraulic fractured SGRs. Most of them use well testing methods, which have too many unrealistic simplifications and assumptions. Also, no …

An Integrated Method For Forecasting Well Deliverability In Gas Condensate Reservoirs With Bottom Aquifer Drive, Abdulaziz Ellafi, Ralph E. Flori, Shari Dunn-Norman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gas condensate reservoirs constitute a significant portion of global hydrocarbon reserves. In these reservoirs, liquids develop in the pore space once bottomhole pressure falls below dew point. This results in the formation of a liquid bank near the wellbore region which decreases gas mobility, which then reduces gas inflow. In such complex reservoirs, it is important to correctly describe PVT impacts, adjustments to well test analysis and inflow performance, and then combine all effects in the reservoir analysis. The literature contains many references to individual adjustments of PVT analysis, well testing, or inflow performance for gas condensate reservoirs, but few …

Learning From Experience: An Automatic Ph Neutralization System Using Hybrid Fuzzy System And Neural Network, Ethar H.K. Alkamil, Seaar Al-Dabooni, Ahmed K. Abbas, Ralph Flori, Donald C. Wunsch

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In oil and gas industry, the pH level is one of the most important indicators of mud contamination while drilling. Although the process has simple components, the pH neutralization process is complicated in the mud circulation system. This difficulty is due to the high nonlinearity of the process. In this paper, the fuzzy neural network (FNN) is integrated to the fuzzy logic controller (FLC) to create a system which identifies pH fluctuation into a drilling mud system, assesses and signals its severity. And then, it automatically actuates a chemical treating fluids valve (CTFV), such as Caustic Soda (CS), for neutralizing …