Chemical Engineering Commons^™

Examining The Effect Of A Chitosan Biopolymer On Alkali-Activated Inorganic Material For Aqueous Pb(Ii) And Zn(Ii) Sorption, Sukanta K. Mondal, Chenglin Wu, Felix C. Nwadire, Ali A. Rownaghi, Aditya Kumar, Yusuf Adewuyi, Monday Uchenna Okoronkwo

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Biopolymers and alkali-activated materials have attracted a great deal of attention as adsorbents for the removal of heavy metal contaminants from aqueous solutions. Both materials are sustainable and feature unique properties, but biopolymers are relatively more expensive or difficult to prepare and exhibit low mechanical and surface properties, a narrow pH range, and thermal stability. In this study, hybrid adsorbents were prepared from both types of material, by alkali activation of low-cost fly ash precursors accompanied by incorporation of 0-2%mass chitosan biopolymer. Two types of alkaline activating solutions, NaOH and Na2SiO3, were employed to generate two sets of hybrid adsorbents …

Stabilizing The Interface Of All-Solid-State Electrolytes Against Cathode Electrodes By Atomic Layer Deposition, Ye Jin, Han Yu, Xiaoqing He, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

In recent years, with the severe safety problems of organic electrolytes, all-solid-state electrolytes (ASSEs) have been considered as an appealing choice to replace organic electrolytes due to their high reliability and safety. However, the uncontrolled interfacial chemical reactions between electrodes and ASSEs would lead to high interfacial resistance, which is detrimental for the battery performance. In this work, LiFePO₄ (LFP) particles were coated with ultra-thin ZrO₂ films by atomic layer deposition (ALD) and the effects of thin film coating on the electrochemical performance of lithium-ion batteries using the NASICON-type Li_1.5Al_0.5Ge_1.5(PO₄) …

Combined Ibuprofen And Curcumin Delivery Using Mg-Mof-74 As A Single Nanocarrier, Shane Lawson, Ali A. Rownaghi, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

Metal-organic frameworks (MOFs) have been extensively used as drug delivery platforms because of their considerable textural properties and physiochemical tunability. However, most medicinal treatments often administer multiple therapeutic pharmaceuticals simultaneously and combined drug delivery over a single MOF carrier has not been extensively developed. As such, in this study we implemented Mg-MOF-74, which is known to have rapid pharmacokinetic properties, for the combined delivery of ibuprofen and curcumin to demonstrate the proof-of-concept for dual-drug delivery over this previously unexplored MOF. To this end, 30 wt % total drug loading of two drugs was impregnated at various ratios (25:5 ibuprofen-curcumin, 20:5 …

The Utilization And Loss Of Available Energy In Aerospace Systems, Mohammad Abbas

Doctoral Dissertations

“Theoretical principles and analytical methodology for the control volume-based energy availability methodology for aerospace vehicles are developed; applications are made to jet-propelled and rocket-propelled vehicles as well as to stand-alone engine systems. Energy availability utilization characteristics of a modeled turbojet engine are studied across a wide range of operating conditions of throttle setting, flight altitude, and flight Mach number. The method is also extended to consider jet-powered vehicles. Fundamental principles regarding entropy generation and energy availability are developed, including directly linking entropy generation and maximum range and endurance of a powered aircraft. Theory and application of the energy utilization methodology …

Numerical Simulation Study Of Gel Treatment For Conformance Control From Lab To Field, Jianqiao Leng

Doctoral Dissertations

“Gel treatment has been widely applied to control reservoir conformance and thus improve the sweep efficiency of injection fluids. Quite a few numerical simulations have been conducted to investigate the factors impacting gel treatment and assist to optimize treatment design and predict the performance. However, there exists significant barrier between the simulation approaches and lab experiments. In this study, two comprehensive reviews have been conducted to identify the gaps between lab and current simulations for in-situ polymer treatment and preformed particle gel treatment, separately.

Based on the identified gaps, the effect of a few major factors which are very important …

The Kanarra Fold-Thrust System -- The Leading Edge Of The Sevier Fold-Thrust Belt, Southwest Utah, William Joseph Michael Chandonia

Doctoral Dissertations

“The Jurassic to Eocene Sevier fold-thrust belt is the subject of continued scientific curiosity in tectonics, stratigraphy, and industry. Understanding its development in southwest Utah is hindered in part due to the multiple origins proposed for the Kanarra anticline, a major leading edge structure -- a drag fold along the Hurricane fault, Laramide monocline, Sevier fault propagation fold, or a combination of these -- which have confused its tectonic significance and regional context. This confusion results from the structural complexity of its exposed eastern limb, as well as displacement and burial of its crest and western limb beneath Neogene sediments …

Evaluation Of Recrosslinkable Preformed Particle Gel (Rppg) As A Fluid Loss Control Material During Drilling Operations, Mohamed Saad M. Ahdaya

Doctoral Dissertations

"One of the most intense, expensive, and time-consuming problems during drilling operations is the loss of circulation, which could result in several consequences, including wellbore collapse, fluid inflow, formation damage, environmental issues, and nonproductive time. This research aims to evaluate novel materials that can mitigate lost circulation and overcome the limitation of other materials. In this research, a comprehensive evaluation of a re-crosslinkable preformed particle gel (RPPG) has been conducted to determine the extent to which it can be used to control drilling fluid losses during drilling operations. The RPPG consists of swellable gel particles that can self-crosslink to form …

Development And Testing Of A New Air-Assisted Flare System For Low Flow Conditions, Hayder Alhameedi

Doctoral Dissertations

"Flare systems provide a safe, efficient, and reliable way to treat unwanted flammable gases that come from relief devices of various chemical processing equipment to ensure the safety of personnel and equipment. Flare systems are classified according to the assist media type as non-assisted (utility), steam-, air-, and pressure-assisted flares. The assist medium enhances mixing between flare gases and surrounding air and induces more air into the combustion zone. An air-assisted flare system is the preferred flare type in regions where steam is unavailable or is costly to supply or ambient temperatures are too low. The environmental protection agency (EPA) …

Engineering Ni/Al2o3 Catalysts By Atomic Layer Deposition For Methane Reforming, Baitang Jin

Doctoral Dissertations

"Dry reforming of methane (DRM) could be a promising choice to utilize natural gas (mainly methane or CH₄), recycle captured CO₂, and produce valuable syngas. Promoters (e.g., CeO₂ and MgO) on Ni/Al₂O₃ prepared by atomic layer deposition (ALD) and ALD-prepared ultrathin overcoating (e.g., ZrO₂ and CeO_x) on Ni/Al₂O₃ prepared by incipient wetness method were investigated for methane reforming.

MgO and CeO₂ prepared by traditional incipient wetness method were used to promote the performance of ALD-prepared Ni nanoparticles (NPs) supported on four-channel α-Al₂O_{3 …}

Surface Modification To Improve The Electrochemical Performance Of Cathode Materials For Lithium-Ion Batteries And Sodium-Ion Batteries, Han Yu

Doctoral Dissertations

"The specific capacity of active materials as well as their cycling stability are the main limiting factors for the performance of lithium-ion batteries (LIBs) and sodium-ion batteries (SIB). Atomic layer deposition (ALD) is considered as a promising surface modification method to enhance the electrochemical performance of active materials for LIBs and SIBs.

In this research, we are committed to using ALD to modify the cathode materials of LIB, by coating different films on the surface of different cathode materials and constructing a stable and favorable interface layer for lithium-ion transport, so that we can protect the active materials from the …

Computational Fluid Dynamics Techniques For Multiphase Flow Systems, Jose Sebastian Uribe Lopez

Doctoral Dissertations

"Mathematical modelling of multiphase flow systems has been a major and persistent challenge over the last decades. Vast attempts to obtain predictive models can be found reported in literature, where major advances can be recognized in recent years, paired to enhancements in computer science and engineering. Notwithstanding, universally valid models with a mechanistic development are far from being achieved. The current status of modelling any multiphase flow system relies on the model order reduction of purely theoretical models. Such reductions and simplifications become the source of deviations in the predictions of the experimentally measured parameters and will constrain the applicability …

Comprehensive Evaluation Of Novel Medium-Temperature And High-Temperature Resistant Re-Crosslinkable Preformed Particle Gels For Conformance Control, Zhanmiao Zhai

Masters Theses

"Gel treatment has been widely used to control excessive water production and improve oil recovery in mature oilfields. In comparison to traditional preformed particle gel (PPG), re-cross linkable preformed particle gel (RPPG) has a significant advantage in treating abnormal features such as open fractures, fracture-like channels, and void space conduits (VSC). This research provides a comprehensive evaluation of two novel RPPG products developed in our lab: medium-temperature resistant RPPG (MT-RPPG) for a Middle East reservoir and a high-temperature resistant RPPG (HT-RPPG) for North Sea reservoirs (130 ^oC).

We assessed the effect of the monomer types and concentration, pH, salinity, …

Effect Of Açai Berry Extract Application On The Bond Strength To The Bleached Enamel Using An Experimental Etch-And-Rinse Adhesive, Lamiaa M. Moharam, Haidy N. Salem, Shahinaz N. Hassan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Background: To evaluate the bleached enamel shear bond strength (SBS) after antioxidants application using an experimental adhesive. Material and Methods: Sixty sound human molars had their roots removed then cut into buccal and lingual halves and mounted in acrylic blocks. Enamel bleaching was done using an in-office chemical bleaching agent. Specimens were arbitrarily allocated into 12 groups (n=10) regarding the three experimental levels of the study: two antioxidant agents [10% açai berry extract, 10% sodium ascorbate prepared gels (applied for 15-min) and the control group (no antioxidant application)], two adhesive materials [commercial etch-and-rinse (ER) adhesive and an experimental ER adhesive] …

Graphical Revamping Of A Crude Distillation Unit Under Two Variable Operational Scenarios - Naphtha Stabilizer And Reformer Operated, Amany G. Abo-Mousa, Dina A. Kamel, Hany A. Elazab, Mamdouh A. Gadalla, Mai K. Fouad

Chemical and Biochemical Engineering Faculty Research & Creative Works

Energy costs represent significant parts of the total operating costs of crude refining industries. Energy integration is a typical solution to reduce heating and cooling utilities in crude refining plants through maximizing the target temperature of crude oil streams before entering the furnace. Over the past few decades, a significant progress has been made in energy integration methods including Pinch technology and mathematical programming approaches. Example of these is a graphical technique which plots Thot versus Tcold for energy analysis and revamping studies. The current research employs the Thot - Tcold diagrams in an algorithm to retrofit an existing crude …

Re-Crosslinking Particle Gel For Co2 Compliance Control And Co2 Filtration Blocking, Yifu Long, Baojun Bai, Thomas P. Schuman

Patents

The present invention generally relates to the composition of particle gels for CO2 - EOR and CO2 storage . More particularly , CO2 resistant particle gels are provided that can re - crosslink at subterranean conditions . These particle gels can be deployed to improve the conformance of CO , flooding , CO , huff - puff , or Water - Alternative - Gas ( WAG ) . The applications may also involve CO2 storage , such as the blocking of CO2 leakage and similar CO2 processing .

Fiber Assisted Re-Cross-Linkable Polymer Gel And Preformed Particle Gels For Fluid Loss And Conformance Control, Baojun Bai, Ze Wang, Zhe Sun, Jingyang Pu, Thomas P. Schuman

Patents

Described herein are compositions useful for controlling fluid flow, for example in a target zone of a subterranean environment, and methods of forming and using the same. The composition generally comprises a quantity of fibers and a quantity of swellable particles, which may be dispersed in a carrier fluid. The composition may be synthesized in the form of a bulk gel or may be gelatinated during use. The fibers in the compositions provide improved performance as compared to prior PPG and RPPG particle containing compositions. Specifically, the compositions reinforce the re-cross-linked/re-associated hydrogel plug in underground features and support proper rehydration …

3d Printed Zeolite Monoliths For Co2 Capture, Fateme Rezaei, Harshul V. Thakkar

Patents

Carbon dioxide (CO2 ) capture materials comprising one or more 3D-printed zeolite monoliths for the capture and or removal of CO2 from air or gases in enclosed compartments, including gases or mixtures of gases having less than about 5% CO2 . Methods for preparing 3D-printed zeolite monoliths useful as CO2 capture materials and filters, as well as methods of removing CO2 from a gas or mixture of gases in an enclosed compartment using 3D-printed zeolite monoliths are provided.

Waste Cooking Oil Management In Egypt: Production Of Biodiesel-Development Of Rapid Test Method, Marwa Mohamed, Nourhan Sherif, Omar Aboelazayem, Hany A. Elazab, Mamdouh Gadalla, Basudeb Saha

Chemical and Biochemical Engineering Faculty Research & Creative Works

According to the United Nations Office for South-South Cooperation (UNOSSC) report in 2017, Egypt produced 500,000 tonnes of WCO from various resources including food industries, restaurants and hotels. Based on our previous funded project, we have reported unique properties for Egyptian WCO as it has very high range acidity (≈18 mg KOH/ g oil) due to the extensive usage of oil in the cooking process. Further, the repeated heating of cooking oil for long time produces carcinogenic compounds that have significant impact on people health. On the other hand, high acidity WCO could be valorised into soap, biodiesel and value …

Advanced Materials And Processes For Gas Separation And Storage Applications, Qasim Mohammed Al-Naddaf

Doctoral Dissertations

"Transition to a clean, renewable energy future requires departure from thermally driven separation processes. In that regard, development of new materials that exhibit high adsorption capacity and selectivity, fast kinetics, and long-term durability under multicomponent conditions is becoming attractive for the applications in clean energy. Moreover, novel sorbents and separation systems that can store gases at normal conditions offer a promising approach for stationary or onboard gas storage. Due to the limitations on the surface area and biding energy restrict commercial materials effectiveness as a potential adsorption and storage material. There is significant interest in the properties of hybrid materials …

Evaluation Of Novel Preformed Particle Gels For Conformance Control And Acid Stimulation Through Core Flooding Tests, Shuda Zhao

Doctoral Dissertations

"Acid stimulation and conformance control are two major methods to improve oil production. This study systematically evaluates two newly developed gels: Degradable Preformed Particle Gel (DPPG) and Re-crosslinkable Preformed Polymer Gel (RPPG). DPPG is designed to be a temporary plugging agent for acid stimulation and can self-degrade into a water-like fluid. RPPG is designed for reservoir sweep efficiency improvement and can re-crosslink to each other and form an immobile bulk gel after being placed in fractures or fracture-like conduits.

For DPPG, this study evaluates the effect of monomer, crosslinker, and initiator concentration on the swelling and degradation performance. Results show …

Removal Of Methylene Blue By Adsorption Of Water Hyacinth Derived Active Carbon Embedded With Cobalt Nanoparticles, Hany A. Elazab, A. O. Okasha, M. A. Radwan, M. A. Sadek, Amin Firouzi, Tamer T. El-Idreesy

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this research, active carbon-based catalyst synthesis and characterization were tested for potential catalysts to be used in dye removal of methylene blue (MB). Water hyacinth is one of the major problems that is facing humankind and especially here in Egypt. One of the implications of industrial activities is environmental pollution. Dyes used in the production of textiles, paper, and clothes are one of the major pollutants. The waste of those dyes discharged into water supplies without treatment or with ineffective treatment harmfully impacts the environment. In this research, the treatment is implemented using active carbon-based catalysts using embedded nanoparticles. …

A Novel Dental Re-Mineralizing Blend Of Hydroxyethyl-Cellulose And Cellulose Nanofibers Oral Film Loaded With Nepheline Apatite Glass: Preparation, Characterization And In Vitro Evaluation Of Re-Mineralizing Effect, Dalia Y. Zaki, Engie M. Safwat, Shaymaa M. Nagi, Haidy N. Salem, Tamer M. Hamdy, Lamiaa M. Moharam, Mohammad L. Hassan, E. M.A. Hamzawy

Chemical and Biochemical Engineering Faculty Research & Creative Works

The present investigation aimed to prepare and evaluate an innovated re-mineralizing oral films made from a blend of hydroxyethyl-cellulose (HEC) and cellulose nanofibers (CNF), loaded with nepheline fluorapatite glass powder. Evaluation of film thickness, folding endurance, disintegration time, surface pH, ions release, together with SEM were carried out. In vitro re-mineralizing effect of the prepared film on demineralized teeth was examined. Results revealed the uniformity in thickness of films, folding endurance more than 300, and the disintegration times more than 24 hrs. The pH values were nearly neutral and high concentrations of calcium and fluoride ions were released. SEM showed …

Antibody-Drug Nanoparticle Induces Synergistic Treatment Efficacies In Her2 Positive Breast Cancer Cells, Muhammad Raisul Abedin, Kaitlyne Powers, Rachel Aiardo, Dibbya Barua, Sutapa Barua

Chemical and Biochemical Engineering Faculty Research & Creative Works

Chemotherapeutic drugs suffer from non-specific binding, undesired toxicity, and poor blood circulation which contribute to poor therapeutic efficacy. In this study, antibody–drug nanoparticles (ADNs) are engineered by synthesizing pure anti-cancer drug nanorods (NRs) in the core of nanoparticles with a therapeutic monoclonal antibody, Trastuzumab on the surface of NRs for specific targeting and synergistic treatments of human epidermal growth factor receptor 2 (HER2) positive breast cancer cells. ADNs were designed by first synthesizing ~ 95 nm diameter × ~ 500 nm long paclitaxel (PTX) NRs using the nanoprecipitation method. The surface of PTXNRs was functionalized at 2′ OH nucleophilic site …

Aiche Virtual Communities Of Practice – Supporting Faculty During The Covid-19 Pandemic, Christi L. Patton (Luks)

Chemical and Biochemical Engineering Faculty Research & Creative Works

In response to the COVID-19 pandemic, chemical engineering departments from around the world shifted their course offerings from in-person to online almost instantaneously. The AIChE Education Division immediately responded to this educational shift by developing five Virtual Communities of Practice (VCPs) that allowed faculty to share experiences and best practices as well as provide a network for emotional support. Community creation, methods and materials shared, and surveys related to the impact of this initiative will be discussed.

A Conceptual Efficient Design Of Energy Recovery Systems Using A New Energy-Area Key Parameter, Ibrahim H. Alhajri, Mamdouh A. Gadalla, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

Energy integration in petrochemical and refining industries is an effective concept to minimize dependence on heating and cooling utilities through networks of exchanger equipment. Pinch Analysis is very popular and successful technique to optimize heat recovery between heat sources and sinks. Yet, design of networks of exchangers is challenging and requires careful attention to energy consumption and exchanger areas. This work presents a graphical methodology to design exchanger networks taking into account both heat loads and transfer areas of exchanger units in one single information. A new parameter is introduced for design that is the ratio between the heat load …

Extracellular Matrix-Mimetic Hydrogels For Treating Neural Tissue Injury: A Focus On Fibrin, Hyaluronic Acid, And Elastin-Like Polypeptide Hydrogels, Derek W. Nelson, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Neurological and functional recovery is limited following central nervous system injury and severe injury to the peripheral nervous system. Extracellular matrix (ECM)-mimetic hydrogels are of particular interest as regenerative scaffolds for the injured nervous system as they provide 3D bioactive interfaces that modulate cellular response to the injury environment and provide naturally degradable scaffolding for effective tissue remodeling. In this review, three unique ECM-mimetic hydrogels used in models of neural injury are reviewed: fibrin hydrogels, which rely on a naturally occurring enzymatic gelation, hyaluronic acid hydrogels, which require chemical modification prior to chemical crosslinking, and elastin-like polypeptide (ELP) hydrogels, which …

Pairing Experimental And Mathematical Modeling Studies On Fluidized Beds For Enhancement Of Models Predictive Quality: A Current Status Overview, Sebastián Uribe, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Modeling of gas-solid fluidized systems has been a prevailing challenge over the last few decades. With different approaches and implementing different sub-models to capture the essential multiphase and multiscale phenomena in these systems, major advances have been achieved, even though most models are only subject to a practical validation of macroscopic parameters. The current description of fluidized beds through mathematical models relies on the inclusion of vast sub-models, leading to an unquantifiable degree of uncertainty on the models' applicability for extrapolation studies. Furthermore, each closure and fitting parameter in the model represents a possible source of deviation, and their optimization, …

Systematic Evaluation Of A Novel Self-Healing Poly(Acrylamide-Co-Vinyl Acetate)/Alginate Polymer Gel For Fluid Flow Control In High Temperature And High Salinity Reservoirs, Jingyang Pu, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preferential fluid flow often occurs when water and CO₂ is injected into mature oilfields, sig-nificantly reducing their injection efficiency. Particle gels have been evaluated and applied to control the short circulation problems. This study systematically investigated a novel poly(acrylamide-co-vinyl acetate)/alginate-based interpenetrated gel system (Alg-IPNG) which is designed to control the preferential fluid flow problems in high-temperature reservoirs. Chromium acetate was incorporated into the gel system to provide the delayed crosslinking feature of the particle gels. The alginate polymer system can also take advantage of the Ca²⁺ ions in the formation water, which exist in most reservoirs, to reinforce …

Solvent-Free Solid-State Lithium Battery Based On Lifepo₄ And Mwcnt/Peo/Pvdf-Hfp For High-Temperature Applications, Han Yu, Ye Jin, Guodong David Zhan, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Rechargeable lithium-ion batteries (LIBs) have a wide range of applications but face challenges in harsh working or operating environments at high temperatures. In this work, a solid polymer electrolyte with MWCNT-COOH as an additive (MWCNT-SPE) was obtained. MWCNT-SPE has a high thermal stability and can be used in high-temperature operating environments. Solid-state lithium batteries based on MWCNT-SPE and LiFePO₄ were assembled. The resulting lithium batteries exhibited excellent electrochemical properties at 70 and 120 °C, demonstrating a wide range of operations suitable for solid-state batteries with extreme demands. The symmetrical Li/MWCNT-SPE/Li cell operated for 1800 h with low polarization voltage …

Open-Ended Hollow Coaxial Cable Resonator Sensor, Jie Huang, Chen Zhu, Rex E. Gerald Ii

Electrical and Computer Engineering Faculty Research & Creative Works

An open-ended hollow coaxial cable resonator probe configured to receive an aerosol sample for analysis. A metal post shorts the resonator's inner and outer conductors. A metal plate is spaced apart from an open end of the resonator by a dielectric layer that contains the received aerosol sample. Interrogator circuitry coupled to the resonator transmits an electromagnetic wave within the resonator and generates an electric field at the open end of the resonator. The interrogator circuitry is responsive to the generated electric field for determining a resonance frequency and an impedance of the resonator when the aerosol sample is present …