Open Access. Powered by Scholars. Published by Universities.®

Chemical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Missouri University of Science and Technology

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 391 - 420 of 2359

Full-Text Articles in Chemical Engineering

Liquid And Solids Phase Backmixing In A Bubble And Slurry Bubble Column Using A Virtual Tracer Response Methodology Based On The Trajectory Data Of The Radioactive Particle Tracking (Rpt) Technique, Lu Han, Premkumar Kamalanathan, Muthanna H. Al-Dahhan May 2022

Liquid And Solids Phase Backmixing In A Bubble And Slurry Bubble Column Using A Virtual Tracer Response Methodology Based On The Trajectory Data Of The Radioactive Particle Tracking (Rpt) Technique, Lu Han, Premkumar Kamalanathan, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Virtual tracer response methodology developed based on the trajectory data of the computer aided radioactive particle tracking (CARPT) technique was demonstrated. The demonstrated virtual tracer technique has advantages of non-invasiveness, near perfect injection/sampling, and flexibility in choosing the sampling/injection boundaries in a specific spatial pattern. With the developed virtual tracer technique, liquid and solids back mixing was investigated at the conditions mimicking Fischer-Tropsch synthesis. Experiments were conducted at different pressure, solids loading, and superficial gas velocity. The axial dispersion model (ADM) and recirculation and cross flow dispersion (RCFD) models were used to model the liquid mixing. Transient sedimentation dispersion model …


Review Of Biomechanical Studies And Finite Element Modeling Of Sternal Closure Using Bio-Active Adhesives, Amatulraheem Al-Abassi, Marcello Papini, Mark R. Towler May 2022

Review Of Biomechanical Studies And Finite Element Modeling Of Sternal Closure Using Bio-Active Adhesives, Amatulraheem Al-Abassi, Marcello Papini, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

The most common complication of median sternotomy surgery is sternum re-separation after sternal fixation, which leads to high rates of morbidity and mortality. The adhered sternal fixation technique comprises the wiring fixation technique and the use of bio-adhesives. Adhered sternal fixation techniques have not been extensively studied using finite element analysis, so mechanical testing studies and finite element analysis of sternal fixation will be presented in this review to find the optimum techniques for simulating sternal fixation with adhesives. The optimal wiring technique should enhance bone stability and limit sternal displacement. Bio-adhesives have been proposed to support sternal fixation, as …


A New Look At Landslides Of The Vermilion And Echo Cliffs, Northern Arizona, Conor M. Watkins, J. David Rogers May 2022

A New Look At Landslides Of The Vermilion And Echo Cliffs, Northern Arizona, Conor M. Watkins, J. David Rogers

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The Vermilion and Echo Cliffs form a nearly continuous escarpment more than 160 km long within the Colorado Plateau physiographic province of North America. The cliffs overlie the Marble Platform in northern Arizona and are located along the Colorado River, just upstream of the Grand Canyon. Large rotational block landslides mantle the erosional escarpment along most of its extent. Although these landslides have been noted for over 100 years, their likely origin has never been explained. Landslide failure surfaces appear to be influenced by the Petrified Forest Member of the Triassic Chinle Formation, a shale layer containing smectite clay weathered …


Establishing Pteridine Metabolism In A Progressive Isogenic Breast Cancer Cell Model – Part Ii, Lindsey Rasmussen, Zachary Foulks, Jiandong Wu, Casey Burton, Honglan Shi May 2022

Establishing Pteridine Metabolism In A Progressive Isogenic Breast Cancer Cell Model – Part Ii, Lindsey Rasmussen, Zachary Foulks, Jiandong Wu, Casey Burton, Honglan Shi

Chemistry Faculty Research & Creative Works

Introduction: Determining the biological significance of pteridines in cancer development and progression remains an important step in understanding the altered levels of urinary pteridines seen in certain cancers. Our companion study revealed that several folate-derived pteridines and lumazines correlated with tumorigenicity in an isogenic, progressive breast cancer cell model, providing direct evidence for the tumorigenic origin of pteridines. Objectives: This study sought to elucidate the pteridine biosynthetic pathway in a progressive breast cancer model via direct pteridine dosing to determine how pteridine metabolism changes with tumorigenicity. Methods: First, MCF10AT breast cancer cells were dosed individually with 15 pteridines to determine …


Integration Of Dynamic Growth Modeling And Hydrodynamics In An Internal-Loop Split Photobioreactor, Laith S. Sabri, Aastha Ojha, Abbas J. Sultan, Muthanna H. Aldahhan May 2022

Integration Of Dynamic Growth Modeling And Hydrodynamics In An Internal-Loop Split Photobioreactor, Laith S. Sabri, Aastha Ojha, Abbas J. Sultan, Muthanna H. Aldahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this study, new high-quality experimental data for culturing green microalgae Scenedesmus in tubular and cylindrical split airlift photobioreactors were obtained under different operating conditions. The obtained experimental data of culturing microalgae Scenedesmus in a tubular photobioreactor were used for determining the kinetic parameters of the photosynthetic reaction. On the other hand, the culturing of green microalgae in a split airlift photobioreactor was used to measure the microalgae cell trajectory using an advanced radioactive particle tracking (RPT) technique. The obtained results in terms of kinetic parameters of the photosynthetic reaction and microalgae cell trajectory were integrated for the first time …


Comprehensive Evaluation Of Self-Healing Polyampholyte Gel Particles For The Severe Leakoff Control Of Drilling Fluids, Lili Yang, Chunlin Xie, Tian Ao, Kaixiao Cui, Guancheng Jiang, Baojun Bai, Yongwei Zhang, Jun Yang, Xingxing Wang, Weiguo Tian May 2022

Comprehensive Evaluation Of Self-Healing Polyampholyte Gel Particles For The Severe Leakoff Control Of Drilling Fluids, Lili Yang, Chunlin Xie, Tian Ao, Kaixiao Cui, Guancheng Jiang, Baojun Bai, Yongwei Zhang, Jun Yang, Xingxing Wang, Weiguo Tian

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Lost circulation has been a serious problem to be solved in many drilling practices during oil, gas and geothermal well drillings. Many materials have been developed and evaluated for the purpose. However, their performance to plug severe leakoff is very limited. Herein, an injectable self-healing hydrogel based on polyampholyte with sulfonated and quaternary ammonium functionalities (P(MPTC-co-NaSS)) was developed and comprehensively evaluated to prevent the severe loss of fluids to formation. By incorporating cation-π (π is for aromatic residues) interaction, the hydrogel shown self-healing property and robustness in severe environment (temperature, salt) by comparison with other hydrogels merely consisting of cation-anion …


Feasibility Study Of Implementing Gamma-Ray Computed Tomography On Measuring Aggregate Distribution And Radiation Shielding Properties Of Concrete Samples, Omar Farid, Nima Farzadnia, Kamal Khayat, Muthanna H. Al-Dahhan Apr 2022

Feasibility Study Of Implementing Gamma-Ray Computed Tomography On Measuring Aggregate Distribution And Radiation Shielding Properties Of Concrete Samples, Omar Farid, Nima Farzadnia, Kamal Khayat, Muthanna H. Al-Dahhan

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Aggregate segregation is one of the key defects that impair the performance of concrete at fresh and hardened stages. This study aims to assess the feasibility of using an advanced technique to identify/scan/determine the aggregate segregation of concrete elements and determine radiation shielding properties of the concrete. The gamma-ray computed tomography (γ-CT) technique was employed to study aggregate distribution/dispersion in self-consolidating concrete (SCC). Accordingly, two SCC mixtures with moderate segregation (MS) and high segregation (HS) levels were cast and compared with highly stable SCC with no segregation (NS). The γ-CT scans were located on three different levels of concrete specimens …


Reactive Oxygen Species (Ros)-Responsive Size-Reducible Nanoassemblies For Deeper Atherosclerotic Plaque Penetration And Enhanced Macrophage-Targeted Drug Delivery, Jianhua He, Wenli Zhang, Xiaoju Zhou, Fengfei Xu, Jiahui Zou, Qiqi Zhang, Yi Zhao, Hongliang He, Hu Yang, Jianping Liu Apr 2022

Reactive Oxygen Species (Ros)-Responsive Size-Reducible Nanoassemblies For Deeper Atherosclerotic Plaque Penetration And Enhanced Macrophage-Targeted Drug Delivery, Jianhua He, Wenli Zhang, Xiaoju Zhou, Fengfei Xu, Jiahui Zou, Qiqi Zhang, Yi Zhao, Hongliang He, Hu Yang, Jianping Liu

Chemical and Biochemical Engineering Faculty Research & Creative Works

Nanoparticle-based therapeutics represent potential strategies for treating atherosclerosis; however, the complex plaque microenvironment poses a barrier for nanoparticles to target the dysfunctional cells. Here, we report reactive oxygen species (ROS)-responsive and size-reducible nanoassemblies, formed by multivalent host-guest interactions between β-cyclodextrins (β-CD)-anchored discoidal recombinant high-density lipoprotein (NP3ST) and hyaluronic acid-ferrocene (HA-Fc) conjugates. The HA-Fc/NP3ST nanoassemblies have extended blood circulation time, specifically accumulate in atherosclerotic plaque mediated by the HA receptors CD44 highly expressed in injured endothelium, rapidly disassemble in response to excess ROS in the intimal and release smaller NP3ST, allowing for further …


Chitosan/Polyacrylamide Green Gels For Water Control In High-Temperature Reservoirs, Mohamed Shamlooh, Reem Elaf, Ibnelwaleed A. Hussein, Mohammed Saad, Baojun Bai Apr 2022

Chitosan/Polyacrylamide Green Gels For Water Control In High-Temperature Reservoirs, Mohamed Shamlooh, Reem Elaf, Ibnelwaleed A. Hussein, Mohammed Saad, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The rheology of a gel system composed of polyacrylamide (PAM) and chitosan is studied under typical reservoir conditions. The impacts of the degree of chitosan deacetylation, temperature, and salinity on the gelation behavior are assessed. The said system was prepared under ambient conditions and matured for 24 h at altered temperatures ranging from 50 up to 125 °C. An optimum formulation has been identified considering the rheological response and the initial viscosity constraints. The increase in the degree of syneresis with the degree of deacetylation indicates the long-Term thermal stability of the gels. Ammonium chloride was an effective retarder for …


Studying Dispersed Phase Holdup In A Pilot Plant Agitated Liquid–Liquid Mixer By Developing Online Expanded Laser Beam Based Technique, Kifah H. Abid, Jihane Mendil, Muthanna H. Al-Dahhan Apr 2022

Studying Dispersed Phase Holdup In A Pilot Plant Agitated Liquid–Liquid Mixer By Developing Online Expanded Laser Beam Based Technique, Kifah H. Abid, Jihane Mendil, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Expanded Laser Transmission Technique (E-LTT), where a laser beam is used in conjunction with a beam expander large enough to cover the average drop size up to a few millimeters in the path of the laser in a liquid–liquid dispersion mixture, has been applied for online continuous measurement and investigation in a non-invasive manner of the drop phase volume fraction in an agitated flow mixer of a pilot plant scale. The limitations of beam scattering by the drops through the dispersion path were overcome by having liquids of matching refractive indices enabled by the temperature control system. This study reports …


Modelling And Validation Of A Gas-Solid Fluidized Bed Using Advanced Measurement Techniques, Sebastián Uribe, Haidar Taofeeq, Muthanna H. Al-Dahhan Apr 2022

Modelling And Validation Of A Gas-Solid Fluidized Bed Using Advanced Measurement Techniques, Sebastián Uribe, Haidar Taofeeq, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

With a Euler-two-phase (E2P) approach, through computational fluid dynamics (CFD) techniques, a mathematical model for the prediction of the local hydrodynamic behavior of a gas-solid fluidized bed was implemented. Simulations are conducted for a fluidized bed of 0.14 m internal diameter packed with Gerdart B glass beads particles, with an average diameter of 365 μm, at dimensionless inlet velocities ranging from (Formula presented.). The implemented model considers the multiphase and multiscale interactions through the inclusion of three sub-models, which allows the model to have a broad range of applicability. Predictions were compared against experimental measurements reported on previous contributions for …


Impact Of Polymer Rheology On Gel Treatment Performance Of Horizontal Wells With Severe Channeling, Jianqiao Leng, Mingzhen Wei, Baojun Bai Apr 2022

Impact Of Polymer Rheology On Gel Treatment Performance Of Horizontal Wells With Severe Channeling, Jianqiao Leng, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gel treatment has been a cost-effective method to control the conformance of a reservoir with severe heterogeneity problems. The water channels in such reservoirs can be classified as open fractures or high permeability porous media with pore-throat network. Many simulation studies have been conducted to discuss gel treatment performance for conformance control. However, nobody considered the polymer rheology difference in open fractures and porous media in simulation. Previous simulation studies also ignored the residual resistance factor as a function of rock permeability rather than a constant parameter. In this study, a conceptual simulation model was established to simulate the linear …


Integrated Direct Air Capture And Oxidative Dehydrogenation Of Propane With Co2 At Isothermal Conditions, Shane Lawson, Khaled Baamran, Kyle Newport, Turki Alghamadi, Gary Jacobs, Fateme Rezaei, Ali A. Rownaghi Apr 2022

Integrated Direct Air Capture And Oxidative Dehydrogenation Of Propane With Co2 At Isothermal Conditions, Shane Lawson, Khaled Baamran, Kyle Newport, Turki Alghamadi, Gary Jacobs, Fateme Rezaei, Ali A. Rownaghi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Developing routes of utilizing CO2 emissions is important for long-term environmental preservation, as storing such emissions underground will eventually become unsustainable. One way of utilizing CO2 emissions is as a light-oxidant feedstock for oxidative dehydrogenation of propane (ODHP) to propylene. However, the adsorption and reaction steps typically occur at widely different temperatures, meaning that the thermal gradients – and by extension process energy requirements – are often unreasonably high. In recent years, dual-functional materials (DFMs) – i.e., materials comprised of a high temperature adsorbent phase alongside a heterogeneous catalyst – have been employed for combined CO2 adsorption …


Continental Break-Up Under A Convergent Setting: Insights From P Wave Radial Anisotropy Tomography Of The Woodlark Rift In Papua New Guinea, Youqiang Yu, Frederik Tilmann, Dapeng Zhao, Stephen S. Gao, Kelly H. Liu Mar 2022

Continental Break-Up Under A Convergent Setting: Insights From P Wave Radial Anisotropy Tomography Of The Woodlark Rift In Papua New Guinea, Youqiang Yu, Frederik Tilmann, Dapeng Zhao, Stephen S. Gao, Kelly H. Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

To explore the dynamic mechanism of continental rifting within a convergent setting, we determine the first P wave radial anisotropic tomography beneath the Woodlark rift in southeastern Papua New Guinea, which develops within the obliquely colliding zone between the Australian and southwest Pacific plates. The rift zone is depicted as localized low-velocity anomalies with positive radial anisotropy, which rules out a dominant role of active mantle upwelling in promoting the rift development and favors passive rifting with decompression melting as main processes. Downwelling slab relics in the upper mantle bounding the rift zone are revealed based on observed high-velocity anomalies …


Modeling Of Temperature Swing Adsorption-Oxidation Of Volatile Organic Compounds, Busuyi O. Adebayo, Fateme Rezaei Mar 2022

Modeling Of Temperature Swing Adsorption-Oxidation Of Volatile Organic Compounds, Busuyi O. Adebayo, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this work, we simulated a single-bed 4-step temperature swing adsorption-oxidation (TSAO) process for capture and in situ oxidation of benzene, as a model VOC, over Ni/ZrO2-SiO2, as a dual-function material (DFM). The TSAO cycles consisted of adsorption, preheating, desorption/oxidation, and cooling steps. The model sensitive parameters were estimated via parameter estimation and validated against experimental data. Extensive parametric analysis was carried out to investigate the effects of key process variables on the TSAO performance. Model results revealed relatively good prediction of the process. Under the conditions investigated, adsorption, oxidation and total removal efficiencies were estimated …


Potassic Volcanism Induced By Mantle Upwelling Through A Slab Window: Evidence From Shear Wave Splitting Analyses In Central Java, Fansheng Kong, Stephen S. Gao, Kelly H. Liu, Jiabiao Li Mar 2022

Potassic Volcanism Induced By Mantle Upwelling Through A Slab Window: Evidence From Shear Wave Splitting Analyses In Central Java, Fansheng Kong, Stephen S. Gao, Kelly H. Liu, Jiabiao Li

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

To delineate the mantle flow fields in the vicinity of a previously proposed slab window and the possible roles that they may play in the formation of potassic volcanism in Central Java, we conduct shear wave splitting analyses using both local S and teleseismic XKS waves (including SKS, SKKS, and PKS) recorded by 121 onshore stations and two ocean bottom seismometers (OBSs). The XKS fast orientations from the OBSs are trench normal and in accord with previous subslab anisotropy measurements. In the eastern part of Central Java, the XKS and local S fast orientations from the onshore stations are mostly …


Formulation And Processing Of Dual Functional Adsorbent/Catalyst Structured Monoliths Using An Additively Manufactured Contactor For Direct Capture/Conversion Of Co2 With Cogeneration Of Ethylene, Shane Lawson, Khaled Baamran, Kyle Newport, Fateme Rezaei, Ali A. Rownaghi Mar 2022

Formulation And Processing Of Dual Functional Adsorbent/Catalyst Structured Monoliths Using An Additively Manufactured Contactor For Direct Capture/Conversion Of Co2 With Cogeneration Of Ethylene, Shane Lawson, Khaled Baamran, Kyle Newport, Fateme Rezaei, Ali A. Rownaghi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Utilizing CO2 as a mild oxidant for oxidative dehydrogenation of ethane (ODHE) is an attractive way of recycling this greenhouse contaminant. Typically, CO2 capture and conversion processes are performed in separate beds, however, combining these processes into one bed incurs advantages of lower thermal gradient and reduced energy costs. This study formulated the first generation of structured dual-functional materials (DFMs) by directly 3D printing metal-oxide-CaO/ZSM-5 inks into monolithic contactors. Specifically, we 3D-printed monoliths with V, Ga, Ni, or Ti dopants to perform metal screening and determine which metal generates the best structured DFM for combined CO2 capture …


Influence Of Saccharide Modifications On Heparin Lyase Iii Substrate Specificities, Jiandong Wu, Pradeep Chopra, Geert Jan Boons, Joseph Zaia Mar 2022

Influence Of Saccharide Modifications On Heparin Lyase Iii Substrate Specificities, Jiandong Wu, Pradeep Chopra, Geert Jan Boons, Joseph Zaia

Chemical and Biochemical Engineering Faculty Research & Creative Works

A Library of 23 Synthetic Heparan Sulfate (HS) Oligosaccharides, Varying in Chain Length, Types, and Positions of Modifications, Was Used to Analyze the Substrate Specificities of Heparin Lyase III Enzymes from Both Flavobacterium Heparinum and Bacteroides Eggerthii. the Influence of Specific Modifications, Including N-Substitution, 2-O Sulfation, 6-O Sulfation, and 3-O Sulfation on Lyase III Digestion Was Examined Systematically. It Was Demonstrated that Lyase III from Both Sources Can Completely Digest Oligosaccharides Lacking O-Sulfates. 2-O Sulfation Completely Blocked Cleavage at the Corresponding Site; 6-O and 3-O Sulfation on Glucosamine Residues Inhibited Enzyme Activity. We Also Observed that There Are Differences in …


Selective Penetration Behavior Of Microgels In Superpermeable Channels And Reservoir Matrices, Yang Zhao, Baojun Bai Mar 2022

Selective Penetration Behavior Of Microgels In Superpermeable Channels And Reservoir Matrices, Yang Zhao, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gel treatment is an effective way to attack excessive water production in many mature oilfields around the world. Selective penetration is desired for successful gel treatments. That is, gel materials should easily penetrate the target zones (i.e., channeling features such as superpermeable channels) without entering/damaging the nontarget zones (i.e., reservoir matrices or oil zones). This study revealed that presence of threshold penetration pressure (ΔPth) was responsible for selective penetration behavior of tested microgels. The concept of ΔPth was utilized to figure out favorable working conditions for effective gel treatments. Microgel dispersions were injected into superpermeable (super-k) sandpacks (mimicking super-k channels …


Wettability Alteration Process At Pore-Scale During Engineered Waterflooding Using Computational Fluid Dynamics, Yongqiang Chen, Ping Chang, Guang Xu, Quan Xie Feb 2022

Wettability Alteration Process At Pore-Scale During Engineered Waterflooding Using Computational Fluid Dynamics, Yongqiang Chen, Ping Chang, Guang Xu, Quan Xie

Mining Engineering Faculty Research & Creative Works

Engineered waterflooding modifies chemistry of injected brine to efficiently and environmentally friendly enhance oil recovery. The common practice of engineered waterflooding includes low salinity waterflooding (LSW) and carbonated waterflooding. Among these oil recovery methods, wettability alteration has been perceived as a critical physicochemical process for additional oil recovery. While extensive work has been conducted to characterize the wettability alteration, the existing theory cannot explain the conflict oil recovery between secondary mode (injecting engineered water at the very beginning of flooding) and tertiary mode (injecting engineered water after conventional waterflooding), where secondary engineered waterflooding always gives a greater incremental oil recovery …


Descriptive Statistical Analysis Of Experimental Data For Wettability Alteration With Surfactants In Carbonate Reservoirs, Ya Yao, Mingzhen Wei, Baojun Bai Feb 2022

Descriptive Statistical Analysis Of Experimental Data For Wettability Alteration With Surfactants In Carbonate Reservoirs, Ya Yao, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Surfactants have been the widely used agents to alter the wettability of carbonate rocks to more water-wet and enhanced oil recovery (EOR). As one of major EOR methods, an effective surfactant huff-puff application design requires comprehensive guidelines about where, how, and when this method could be applied. In order to construct such guidelines, a dataset including 338 effective surfactant imbibition tests is established by collecting information from nearly 50 publications. Based on this dataset, descriptive statistical analysis methods are used to conduct data analysis, including three main parts. The first part establishes the application guidelines for surfactant huff-puff treatments which …


A Detailed Hydrodynamic Study Of The Split-Plate Airlift Reactor By Using Non-Invasive Gamma-Ray Techniques, Laith S. Sabri, Abbas J. Sultan, Hasan Shakir Majdi, Shadha K. Jebur, Muthanna H. Al-Dahhan Feb 2022

A Detailed Hydrodynamic Study Of The Split-Plate Airlift Reactor By Using Non-Invasive Gamma-Ray Techniques, Laith S. Sabri, Abbas J. Sultan, Hasan Shakir Majdi, Shadha K. Jebur, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study focused on detailed investigations of selected local hydrodynamics in split airlift reactor by using an unconventional measurements facility: computed tomography (CT) and radioactive particle tracking (RPT). The local distribution in a cross-sectional manner with its radial's profiles for gas holdup, liquid velocity flow field, shear stresses, and turbulent kinetic energy were studied under various gas velocity 1, 2 and 3 cm/s with various six axial level z = 12, 20, 40, 60, 90 and 112 cm. The distribution in gas-liquid phases in the whole split reactor column, the riser and downcomer sides, including their behavior at the top …


Geant4 Simulation For Radioactive Particle Tracking (Rpt) Technique, Ahmed A. Alghamdi, Thaar M. Aljuwaya, Abdullah S. Alomari, Muthanna H. Al-Dahhan Feb 2022

Geant4 Simulation For Radioactive Particle Tracking (Rpt) Technique, Ahmed A. Alghamdi, Thaar M. Aljuwaya, Abdullah S. Alomari, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

In the past two decades, the radioactive particle tracking (RPT) measurement technique has been proven to visualize flow fields of most multiphase flow systems of industrial interest. The accuracy of RPT, and hence the data obtained, depend largely on the calibration process, which stands here as a basis for two subsequent processes: tracking and reconstruction. However, limitations in the RPT calibration process can be found in different experimental constrains and in assumptions made in the classical Monte Carlo approach used to simulate number of counts received by the detectors. Therefore, in this work, we applied a GEANT4-based Monte Carlo code …


Laboratory Evaluation Of Placement Behavior Of Microgels For Conformance Control In Reservoirs Containing Superpermeable Channels, Yang Zhao, Baojun Bai Feb 2022

Laboratory Evaluation Of Placement Behavior Of Microgels For Conformance Control In Reservoirs Containing Superpermeable Channels, Yang Zhao, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gel treatment has been proven an effective method to attack excessive water production in many mature oilfields. However, not all of the application projects have successful stories. The effectiveness of a gel treatment largely depends on the transport and placement behavior of gel materials in reservoirs to be treated. In this work, we carried out systematic studies to investigate the transport, placement, water-blocking ability, fluid diversion and sweep improvement, and matrix damage effect of micrometer-sized preformed particle gels (microgels) in reservoirs containing superpermeable (super-K) channels. The impact of the channel/matrix permeability contrast and the particle/pore size ratio in the channels …


A Detailed Hydrodynamic Study Of The Split-Plate Airlift Reactor By Using Non-Invasive Gamma-Ray Techniques, Laith S. Sabri, Abbas J. Sultan, Hasan Shakir Majdi, Shadha K. Jebur, Muthanna H. Al-Dahhan Feb 2022

A Detailed Hydrodynamic Study Of The Split-Plate Airlift Reactor By Using Non-Invasive Gamma-Ray Techniques, Laith S. Sabri, Abbas J. Sultan, Hasan Shakir Majdi, Shadha K. Jebur, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study focused on detailed investigations of selected local hydrodynamics in split airlift reactor by using an unconventional measurements facility: computed tomography (CT) and radioactive particle tracking (RPT). The local distribution in a cross-sectional manner with its radial's profiles for gas holdup, liquid velocity flow field, shear stresses, and turbulent kinetic energy were studied under various gas velocity 1, 2 and 3 cm/s with various six axial level z = 12, 20, 40, 60, 90 and 112 cm. The distribution in gas–liquid phases in the whole split reactor column, the riser and downcomer sides, including their behavior at the top …


Tracking The Heavy Metal Contaminants Entrained With The Flow Into A Trickle Bed Hydrotreating Reactor Packed With Different Catalyst Shapes Using Newly Developed Noninvasive Dynamic Radioactive Particle Tracking, Binbin Qi, Omar Farid, Alexandre França Velo, Jihane Mendil, Sebastián Uribe, Yasunobu Kaneko, Kei Sakakura, Yasuhito Kagota, Muthanna H. Al-Dahhan Feb 2022

Tracking The Heavy Metal Contaminants Entrained With The Flow Into A Trickle Bed Hydrotreating Reactor Packed With Different Catalyst Shapes Using Newly Developed Noninvasive Dynamic Radioactive Particle Tracking, Binbin Qi, Omar Farid, Alexandre França Velo, Jihane Mendil, Sebastián Uribe, Yasunobu Kaneko, Kei Sakakura, Yasuhito Kagota, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

A newly developed modified Dynamic Radioactive Particle Tracking system (DRPT) was used to investigate the heavy metal contaminants deposition locations in different catalyst beds, sphere, cylinder, trilobe, and quadrilobed in Trickle Bed Reactors. In the present paper, Kernel Density Estimator (KDE) was used to estimate the probability density distributions of heavy metal contaminants depositions in terms of bed radius height. The result shows that the four cases have similar probability density distribution in terms of radius, while the spherical catalyst has the larger distribution range in terms of bed height. The heavy metal deposition is directly related to the pressure …


Geant4 Simulation For Radioactive Particle Tracking (Rpt) Technique, Ahmed A. Alghamdi, Thaar M. Aljuwaya, Abdullah S. Alomari, Muthanna H. Al-Dahhan Feb 2022

Geant4 Simulation For Radioactive Particle Tracking (Rpt) Technique, Ahmed A. Alghamdi, Thaar M. Aljuwaya, Abdullah S. Alomari, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

In the past two decades, the radioactive particle tracking (RPT) measurement technique has been proven to visualize flow fields of most multiphase flow systems of industrial interest. The accuracy of RPT, and hence the data obtained, depend largely on the calibration process, which stands here as a basis for two subsequent processes: tracking and reconstruction. However, limitations in the RPT calibration process can be found in different experimental constrains and in assumptions made in the classical Monte Carlo approach used to simulate number of counts received by the detectors. Therefore, in this work, we applied a GEANT4-based Monte Carlo code …


Flow Regimes In Gas-Solid Fluidized Beds Via Micro-Foil Heat Flux Sensor, Haidar Taofeeq, Sebastián Uribe, Muthanna H. Al-Dahhan Feb 2022

Flow Regimes In Gas-Solid Fluidized Beds Via Micro-Foil Heat Flux Sensor, Haidar Taofeeq, Sebastián Uribe, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

The flow regime transitions in a gas-solid fluidized bed were studied for the first time using a micro-foil heat flux sensor. The time series of heat flux signals was analyzed by statistical and state space methods. The experimental measurements were performed in a lab-scale gas-solid fluidization column. Four different flow regimes, i.e., fixed-bed flow regime, bubbling-flow regime, slugging-flow regime, and turbulent-flow regime, and three intermediate transition velocities, i.e., minimum fluidizing velocity or minimum bubbling velocity, minimum slugging velocity, and minimum turbulent velocity, were successfully identified. The method based on the analysis of heat flux sensor measurements allowed to determine accurately …


Asphaltene Thermodynamic Precipitation During Miscible Nitrogen Gas Injection, Mukhtar Elturki, Abdulmohsin Imqam Feb 2022

Asphaltene Thermodynamic Precipitation During Miscible Nitrogen Gas Injection, Mukhtar Elturki, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

For many years, miscible gas injection has been the most beneficial enhanced oil recovery method in the oil and gas industry. However, injecting a miscible gas to displace oil often causes the flocculation and deposition of asphaltenes, which subsequently leads to a number of production problems. Nitrogen gas (N2) injection has been used to enhance oil recovery in some oil fields, seeking to improve oil recovery. However, few works have implemented N2 injection and investigated its effect on asphaltene precipitation and deposition. This research investigated the N2 miscible flow mechanism in nanopores and its impact on asphaltene precipitations, which can …


Alf3-Al2o3 Ald Thin-Film-Coated Li1.2mn0.54co0.13ni0.13o2 Particles For Lithium-Ion Batteries: Long-Term Protection, Han Yu, Xiaoqing He, Xinhua Liang Jan 2022

Alf3-Al2o3 Ald Thin-Film-Coated Li1.2mn0.54co0.13ni0.13o2 Particles For Lithium-Ion Batteries: Long-Term Protection, Han Yu, Xiaoqing He, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Improving the performance of existing cathode materials of lithium-ion batteries (LIBs) through surface modification has been proven to be an effective way to improve the performance of LIBs. However, it is a challenge to use a traditional method to prepare an effective coating film, which meets the requirements of uniformity, continuity, electrochemical stability, and strong mechanical properties. In this study, an ultrathin AlF3-Al2O3 film was coated on the surface of Li1.2Mn0.54Co0.13Ni0.13O2 (LRNMC) particles by atomic layer deposition (ALD) in a fluidized bed reactor. A cathode electrolyte …