Chemical Engineering Commons^™

Water-Soluble Saponins Accumulate In Drought-Stressed Switchgrass And May Inhibit Yeast Growth During Bioethanol Production, Sarvada Hemant Chipkar, Katherine Smith, Elizabeth M. Whelan, Derek J. Debrauske, Annie Jen, Katherine A. Overmyer, Andrea Senyk, Larkin Hooker-Moericke, Marissa Gallmeyer, Joshua J. Coon, A. Daniel Jones, Trey K. Sato, Rebecca G. Ong

Michigan Tech Publications, Part 1

Background: Developing economically viable pathways to produce renewable energy has become an important research theme in recent years. Lignocellulosic biomass is a promising feedstock that can be converted into second-generation biofuels and bioproducts. Global warming has adversely affected climate change causing many environmental changes that have impacted earth surface temperature and rainfall patterns. Recent research has shown that environmental growth conditions altered the composition of drought-stressed switchgrass and directly influenced the extent of biomass conversion to fuels by completely inhibiting yeast growth during fermentation. Our goal in this project was to find a way to overcome the microbial inhibition and …

Accurate Predictions Of Thermoset Resin Glass Transition Temperatures From All-Atom Molecular Dynamics Simulation, Gregory Odegard, Sagar Patil, Prashik Gaikwad, Prathamesh Deshpande, Aaron Krieg, Sagar P. Shah, Aspen Reyes, Tarik Dickens, Julia A. King, Marianna Maiaru

Michigan Tech Publications, Part 1

To enable the design and development of the next generation of high-performance composite materials, there is a need to establish improved computational simulation protocols for accurate and efficient prediction of physical, mechanical, and thermal properties of thermoset resins. This is especially true for the prediction of glass transition temperature (Tg), as there are many discrepancies in the literature regarding simulation protocols and the use of cooling rate correction factors for predicting values using molecular dynamics (MD) simulation. The objectives of this study are to demonstrate accurate prediction the Tg with MD without the use of cooling rate correction factors and …

Virucidal N95 Respirator Face Masks Via Ultrathin Surface-Grafted Quaternary Ammonium Polymer Coatings, Mirco Sorci, Tanner D. Fink, Vaishali Sharma, Sneha Singh, Ruiwen Chen, Brigitte L. Arduini, Katharine Dovidenko, Caryn L. Heldt, Edmund F. Palermo, R Helen Zha

Michigan Tech Publications, Part 1

N95 respirator face masks serve as effective physical barriers against airborne virus transmission, especially in a hospital setting. However, conventional filtration materials, such as nonwoven polypropylene fibers, have no inherent virucidal activity, and thus, the risk of surface contamination increases with wear time. The ability of face masks to protect against infection can be likely improved by incorporating components that deactivate viruses on contact. We present a facile method for covalently attaching antiviral quaternary ammonium polymers to the fiber surfaces of nonwoven polypropylene fabrics that are commonly used as filtration materials in N95 respirators via ultraviolet (UV)-initiated grafting of biocidal …

Molecular Modeling Of High-Performance Thermoset Polymer Matrix Composites For Aerospace Applications, Prathamesh P. Deshpande

Dissertations, Master's Theses and Master's Reports

The global efforts from major space agencies to transport humans to Mars will require a novel lightweight and ultra-high strength material for the spacecraft structure. Three decades of research with the carbon nanotubes (CNTs) have proved that the material can be an ideal candidate for the composite reinforcement if certain shortcomings are overcome. Also, the rapid development of the polymer resin industry has introduced a wide range of high-performance resins that show high compatibility with the graphitic surface of the CNTs. This research explores the computational design of these materials and evaluates their efficacy as the next generation of aerospace …

Design And Analysis Of Marangoni-Driven Robotic Surfers, Mitchel L. Timm

Dissertations, Master's Theses and Master's Reports

We designed and experimentally studied the dynamics of two robotic systems that surf along the water-air interface. The robots were self-propelled by means of creating and maintaining a surface tension gradient resulting from an asymmetric release of isopropyl alcohol (IPA). The imbalance in the distribution of surface tension surrounding the robots generates a propulsive force commonly referred to as Marangoni propulsion. First, we considered a single surfer, which was custom-made with novel control mechanisms that allow for both forward motion and steering to be remotely adjusted solely through the manipulation of local surface stresses. We analyzed the performance of this …

Reverse Cationic Flotation Of Hematite, Natalia Parra Alvarez

Dissertations, Master's Theses and Master's Reports

The reverse cationic flotation of hematite is the most common method to process hematite ores. The goal of this research is to understand the impact of fundamental water and surface effects to enable the optimization of the flotation process. At present, reverse cationic flotation is performed using a single chemical as both collector and frother. Excessive amounts of frother or collector should lead to diminished performance. This research investigates this phenomenon by replacing some of the collector with frothers. It was found that flotation recovery can be improved up to 2.5wt% via 10% replacement with methyl isobutyl carbinol (MIBC). Since …

Towards A Circular Economy: Liquid-Fed Fast Pyrolysis Of Waste Polyolefin Plastics, Daniel G. Kulas

Dissertations, Master's Theses and Master's Reports

Plastic usage has quickly grown in recent years as plastics have become an essential part of everyday life. Unfortunately, recycling rates have not matched the increased growth, with the majority of waste plastic landfilled. The strategy of circular economy has been proposed to reuse the waste plastic to create new polymers, thus avoiding both landfilling and the use of virgin raw materials. Achieving a circular economy for plastics requires the development of new technologies capable of recycling plastic waste under a circular economy perspective. In this dissertation, a novel liquid-fed fast pyrolysis process is introduced towards achieving a circular economy. …

Understanding Strength Of Dried Iron Ore Pellets, Victor Claremboux

Dissertations, Master's Theses and Master's Reports

After an extensive literature review, it was found that there was no reliable way for predicting the impact of binders or mixtures of binders on iron ore pellets. This is a challenging problem because iron ore pellets are a complex product of an agglomeration process which is typically controlled only to the extent that is necessary to form a quality product for ironmaking. This work identifies the resistance of a dried pellet to abrasion as a prime variable to record and analyze to understand the influence of combined pellet binders. A consistent method of measuring abrasion resistance is identified and …

Development Of Advanced Models For Pre-Ignition Prediction In Gas Engines And Analytical Model For Wallfilm Evaporation, Ankith Ullal

Dissertations, Master's Theses and Master's Reports

Ever-changing regulations aimed at improving efficiency and reducing harmful emissions have resulted in many power-generation device (engine) manufacturers to adopt new strategies. Computer simulation of these new strategies of power generation requires more accurate and higher fidelity modelling tools. In the present study, two such models are developed. The first model deals with pre-ignition phenomena driven by lubricant (lube) oil in natural gas engines and the second model is relevant to prediction of wallfilm evaporation by employing analytical solutions to transport governing equations for boundary layers.

Pre-ignition in engines has been the subject of current research with the advent of …

Recovering And Upgrading Kraft Lignin For Application In Flexible Polyurethane Foam, Peng Quan

Dissertations, Master's Theses and Master's Reports

Lignin is the second abundant natural polymer and has been highlighted as a potential substitute for fossil-based raw materials. However, the inherent molecular heterogeneity and the complex recovery processes result in the challenge of controlling the molecular properties and value-added applications of lignin in large scale. To address those issues, a novel acid-liquefaction process was developed in this study to recover Kraft lignin with improved molecular homogeneity directly from black liquor.

In the first study, the liquefaction parameters were screened based on yield and molecular weight properties of the recovered lignin. Then, the recovered lignin samples were used to replace …

A Novel Pulsed-Plasma Catalytic Reactor For Dry Reforming Of Methane, Benjamin F. Caithamer

Dissertations, Master's Theses and Master's Reports

Concerns over greenhouse gases have led to an increased interest in the Dry Reforming of Methane (DRM) which produces hydrogen and carbon monoxide from the reaction of two greenhouse gases (CO₂ and CH₄) over a catalyst. Currently, DRM is primarily a catalytic process which operates at temperatures between 700°C - 900°C, and 10 to 20 bar using a 1–1.5 ratio of CH₄/CO₂. Unfortunately, these conditions also promote the water-gas shift reaction, which produces additional CO₂. Catalyst coking and sintering can also be significant problems at these harsh conditions. We have developed …

Measuring The Physicochemical Properties Of Viral Vectors To Enhance Gene Therapy Production, Oluwatoyin Areo

Dissertations, Master's Theses and Master's Reports

Gene therapy is a therapeutic intervention designed to correct single gene disorders. AAV has been identified as a suitable vector for delivering therapeutic genes. However, the use of AAV has been hampered by manufacturing challenges inclusive of low virus recovery, and the presence of AAV without the gene of interest (empty capsids). To solve these problems, we characterized the charge and hydrophobicity of AAV, and surrogate viruses using chemical force microscopy (CFM). CFM uses a modified atomic force microscope (AFM) probe to measure the adhesion force between a virus particle and a functional chemistry.The virus particles to be measured are …

Open Source Software Toolchain For Automated Non‐Targeted Screening For Toxins In Alternative Foods, S. W. Breuer, L. Toppen, S. K. Schum, J. M. Pearce

Michigan Tech Publications, Part 1

Previous published methods for non-targeted screening of toxins in alternative foods such as leaf concentrate, agricultural residues or plastic fed to biological consortia are time consuming and expensive and thus present accessibility, as well as, time-constraint issues for scientists from under resourced settings to identify safe alternative foods. The novel methodology presented here, utilizes a completely free and open source software toolchain for automatically screening unknown alternative foods for toxicity using experimental data from ultra-high-pressure liquid chromatography and mass spectrometry. The process uses three distinct tools (mass spectrometry analysis with MZmine 2, formula assignment with MFAssignR, and data filtering with …

Mechanical Properties And Characterization Of Epoxy Composites Containing Highly Entangled As-Received And Acid Treated Carbon Nanotubes, Aaron Krieg, Julia A. King, Gregory M. Odegard, Timothy Leftwich, Leif K. Odegard, Paul D. Fraley, Ibrahim Miskioglu, Claire Jolowsky, Matthew Lundblad, Jin Gyu Park, Richard Liang

Michigan Tech Publications, Part 1

Huntsman–Merrimack MIRALON® carbon nanotubes (CNTs) are a novel, highly entan-gled, commercially available, and scalable format of nanotubes. As-received and acid-treated CNTs were added to aerospace grade epoxy (CYCOM® 977-3), and the composites were characterized. The epoxy resin is expected to infiltrate the network of the CNTs and could improve mechanical properties. Epoxy composites were tested for flexural and viscoelastic properties and the as-re-ceived and acid treated CNTs were characterized using Field-Emission Scanning and Transmission Electron Microscopy, X-Ray Photoelectron Spectroscopy, and Thermogravimetric Analysis. Composites containing 0.4 wt% as-received CNTs showed an increase in flexural strength, from 136.9 MPa for neat epoxy …

A High Solids Field-To-Fuel Research Pipeline To Identify Interactions Between Feedstocks And Biofuel Production, Meenaa Chandrasekar, Leela Joshi, Karleigh M. Krieg, Sarvada Chipkar, Emily Burke, Derek J. Debrauske, Kurt D. Thelen, Trey K. Sato, Rebecca Ong

Michigan Tech Publications, Part 1

Background: Environmental factors, such as weather extremes, have the potential to cause adverse effects on plant biomass quality and quantity. Beyond adversely affecting feedstock yield and composition, which have been extensively studied, environmental factors can have detrimental effects on saccharification and fermentation processes in biofuel production. Only a few studies have evaluated the effect of these factors on biomass deconstruction into biofuel and resulting fuel yields. This field-to-fuel evaluation of various feedstocks requires rigorous coordination of pretreatment, enzymatic hydrolysis, and fermentation experiments. A large number of biomass samples, often in limited quantity, are needed to thoroughly understand the effect of …

Elementary Reaction-Based Kinetic Model For The Fate Of: N -Nitrosodimethylamine Under Uv Oxidation, Benjamin Barrios, Divya Kamath, Erica Coscarelli, Daisuke Minakata

Michigan Tech Publications, Part 1

UV photolysis is an effective process to remove nitrosamines from contaminated water resources. Nitrosamines represent a class of compounds with high potential for carcinogenicity and, therefore, there are serious concerns regarding their threat to human health and their environmental toxicity. Although the photochemical parameters of parent nitrosamines and their initial reaction pathways are well understood, the fate of nitrogen-containing species and reactive nitrogen species generated from nitrosamine degradation has not yet been elucidated. In this study, we develop an elementary reaction-based kinetic model for the photolysis of N-nitrosodimethylamine (NDMA) and the photochemical transformation products. We use density functional theory quantum …

Single-Particle Characterization Of Sars-Cov-2 Isoelectric Point And Comparison To Variants Of Interest, Oluwatoyin Areo, Pratik U. Joshi, Mark Obrenovich, Moncef Tayahi, Caryn L. Heldt

Michigan Tech Publications, Part 1

SARS-CoV-2, the cause of COVID-19, is a new, highly pathogenic coronavirus, which is the third coronavirus to emerge in the past 2 decades and the first to become a global pandemic. The virus has demonstrated itself to be extremely transmissible and deadly. Recent data suggest that a targeted approach is key to mitigating infectivity. Due to the proliferation of cataloged protein and nucleic acid sequences in databases, the function of the nucleic acid, and genetic encoded proteins, we make predictions by simply aligning sequences and exploring their homology. Thus, similar amino acid sequences in a protein usually confer similar biochemical …

Hydrochloric Acid Modification And Lead Removal Studies On Naturally Occurring Zeolites From Nevada, New Mexico, And Arizona, Garven M. Huntley, Rudy Luck, Michael Mullins, Nick Newberry

Michigan Tech Publications, Part 1

Four naturally occurring zeolites were examined to verify their assignments as chabazites AZLB-Ca and AZLB-Na (Bowie, Arizona) and clinoptilolites NM-Ca (Winston, New Mexico) and NV-Na (Ash Meadows, Nevada). Based on powder X-ray diffraction, NM-Ca was discovered to be mostly quartz with some clinoptilolite residues. Treatment with concentrated HCl (12.1 M) acid resulted in AZLB-Ca and AZLB-Na, the chabazite-like species, becoming amorphous, as confirmed by powder X-ray diffraction. In contrast, NM-Ca and NV-Na, which are clinoptilolite-like species, withstood boiling in concentrated HCl acid. This treatment removes calcium, magnesium, sodium, potassium, aluminum, and iron atoms or ions from the framework while leaving …

Polymeric Nanovectors Incorporated With Ganciclovir And Hsv-Tk Encoding Plasmid For Gene-Directed Enzyme Prodrug Therapy, Alicia J. Sawdon, Jun Zhang, Sarah Peng, Esmael M. Alyami, Ching An Peng

Michigan Tech Publications, Part 1

In the area of gene-directed enzyme prodrug therapy (GDEPT), using herpes simplex virus thymidine kinase (HSV-tk) paired with prodrug ganciclovir (GCV) for cancer treatment has been extensively studied. It is a process involved with two steps whereby the gene (HSV-tk) is first delivered to malignant cells. Afterward, non-toxic GCV is administered to that site and activated to cytotoxic ganciclovir triphosphate by HSV-tk enzyme expressed exogenously. In this study, we presented a one-step approach that both gene and prodrug were delivered at the same time by incorporating them with polymeric micellar nanovectors. GCV was employed as an initiator in the ring-opening …

Characterization Of Particle Size And Composition Of Respirable Coal Mine Dust, Lei Pan, Sean Golden, Shoeleh Assemi, Marc Freddy Sime, Xuming Wang, Yuesheng Gao, Jan Miller

Michigan Tech Publications, Part 1

Respirable coal mine dust (RCMD) particles, particularly the nano-sized fraction (<1 >μm) of the RCMD if present, can cause severe lung diseases in coal miners. Characterization of both the particle size and chemical composition of such RCMD particles remains a work in progress, in par-ticular, with respect to the nano-sized fraction of RCMD. In this work, various methods were sur-veyed and used to obtain both the size and chemical composition of RCMD particles, including scanning electron microscopy (SEM), scanning transmission electron microscopy (S-TEM), dynamic light scattering (DLS), and asymmetric flow field-flow fractionation (AsFIFFF). It was found that the micron-sized fraction …

Carbon Capture And Utilization, Sriram Valluri

Dissertations, Master's Theses and Master's Reports

As the world moves towards clean energy initiative, carbon capture and utilization technologies are key to achieving net zero emissions. CO2 capture with amines has many disadvantages and cannot be applied to commercial power plants. The current manuscript will address this issue as well as a solution that involves the use of low-cost alkali absorbent CO₂ capture solutions, combined with an electrochemical regeneration method that uses the least amount of energy available for capture and regeneration. This research will also further address the issue of how to deal with the captured CO2. Several viable storage and utilization methods have …

Effects Of Microporous Structure On The Enzymatic Conversion Of Biomass Using A Multiscale Model, Saketh Merugu

Dissertations, Master's Theses and Master's Reports

The generation of biofuels from lignocellulosic biomass involves innovative process technology that is being investigated worldwide. Enzymatic hydrolysis is a major step in the contemporary process of the generation of biofuels. Guided by pore size distribution measured using NMR cryoporometry, we developed pore-enzyme diffusion and adsorption models at the particle level coupled with a kinetic model for cellulose, cellobiose, and glucose production at flask level. By simulating these models in MATLAB, COMSOL, and Polymath software packages, we investigate the effects of various biomass particle-related parameters (particle dimensions, porosity, enzyme accessibility) on the characteristic time of enzyme diffusion and adsorption and …

New Horizons For Processing And Utilizing Red Mud, M. Archambo

Dissertations, Master's Theses and Master's Reports

Red mud is an industrial slurry waste that is produced as a byproduct of the Bayer process for alumina. The waste is generated in large quantities, up to a ratio of 2:1 against the valued product alumina. Red mud exhibits many chemical and physical properties that categorize it as a hazardous material. Due to the addition of sodium hydroxide in processing, the pH is typically at values close to 13. Small particle size discourages separation from water for disposal, so drying red mud happens over many years.

The pH of red mud can be reduced with inexpensive reagents. Carbon dioxide …

Specifically Adsorbed Ions In Hematite Flotation, Natalia Parra Alvarez

Dissertations, Master's Theses and Master's Reports

Specifically adsorbed ions, such as calcium and magnesium in iron ore flotation, are ions that can chemically bind with the mineral surfaces and alter the surface properties. Calcium and magnesium are unavoidable in process water and their concentrations are increasing due to water recirculation and reagent additions. These ions are detrimental to the flotation process. Calcium has always been the main focus in research, yet we found that magnesium is more detrimental in flotation due to its smaller atomic size. Starch adsorption in iron ore flotation is key for the effective depression of hematite. It has been determined by flotation, …

Anaerobic Reductive Bioleaching Of Manganese Ores, Neha Sharma

Dissertations, Master's Theses and Master's Reports

The increasing demand of manganese in the industries and various hindrances in its production from low grade ores by conventional method has made it imperative for researchers around the world to develop a method of manganese extraction from low grade ores that is both environment friendly and economical. Bioleaching has shown significant potential in manganese extraction and efficiencies of extraction have been found to be 70-98% with the help of various bacteria and fungi.

This study focuses on extraction of manganese with the help of mixed bacterial strains that have been collected from their natural anaerobic environment. The extraction of …

The Extraction Of Waxes And Lipids From Sorghum Using Green And Renewable Solvents Followed By Conversion To Biofuels Using Gamma-Valerolactone Pretreatment, Marissa Gallmeyer

Dissertations, Master's Theses and Master's Reports

Plant matter contains waxes and lipids that can be extracted and used or sold as a value-added product prior to conversion of the remaining plant material to biofuels. Wax and lipid extraction of plant materials is currently performed using volatile, non-renewable hydrocarbons, primarily hexane, which is produced from fossil fuels and can pose a health and safety hazard. The purpose of this study is to compare the amount and characteristics of waxes extracted by hexane with those extracted using organic solvents that are less toxic and can be produced from renewable sources.

Sorghum samples were extracted separately with hexane, 2-methyltetrahydrofuran …

Lithium-Ion Battery Recycling Using Mineral Processing Methods, Ruiting Zhan

Dissertations, Master's Theses and Master's Reports

The surges in the volume of the retired Li-ion batteries (LIBs) in future motivate Li-ion battery recycling R&D activities worldwide. Within the Li-ion batteries, the most valuable component is cathode active materials that consist of critical minerals and materials such as lithium, cobalt, nickel, manganese. The LIB recycling has been investigated at both the lab scale and industrial scale. There are three existing recycling methods, namely physical separation, pyrometallurgy, and hydrometallurgy. Physical separation methods sort individual battery components without changing materials’ physical properties, while both pyrometallurgical and hydrometallurgical recycling routes aim to recover valuable metals using a high-temperature process and …

Thermostabilization Of Viruses Via Complex Coacervation, Xue Mi, Whitney C. Blocher Mctigue, Pratik Umesh Joshi, Mallory K. Bunker, Caryn L. Heldt, Sarah L. Perry

Michigan Tech Publications, Part 1

Widespread vaccine coverage for viral diseases could save the lives of millions of people each year. For viral vaccines to be effective, they must be transported and stored in a narrow temperature range of 2–8 °C. If temperatures are not maintained, the vaccine may lose its potency and would no longer be effective in fighting disease; this is called the cold storage problem. Finding a way to thermally stabilize a virus and end the need to transport and store vaccines at refrigeration temperatures will increase access to life-saving vaccines. We explore the use of polymer-rich complex coacervates to stabilize viruses. …

Ammonia Fiber Expansion (Afex) Pretreatment Of Lignocellulosic Biomass, Shishir P. S. Chundawat, Ramendra K Pal, Chao Zhao, Timothy Campbell, Farzaneh Teymouri, Josh Videto, Chandra Nielson, Bradley Wieferich, Leonardo Sousa, Bruce E Dale, Venkatesh Balan, Sarvada Chipkar, Jacob Aguado, Emily Burke, Rebecca Garlock Ong

Michigan Tech Publications, Part 1

Lignocellulosic materials are plant-derived feedstocks, such as crop residues (e.g., corn stover, rice straw, and sugar cane bagasse) and purpose-grown energy crops (e.g., miscanthus, and switchgrass) that are available in large quantities to produce biofuels, biochemicals, and animal feed. Plant polysaccharides (i.e., cellulose, hemicellulose, and pectin) embedded within cell walls are highly recalcitrant towards conversion into useful products. Ammonia fiber expansion (AFEX) is a thermochemical pretreatment that increases accessibility of polysaccharides to enzymes for hydrolysis into fermentable sugars. These released sugars can be converted into fuels and chemicals in a biorefinery. Here, we describe a laboratory-scale batch AFEX process to …

Electrocoagulation: A Promising Method To Treat And Reuse Mineral Processing Wastewater With High Cod, Gaogui Jing, Shuai Ren, Yuesheng Gao, Wei Sun, Zhiyong Gao

Michigan Tech Publications, Part 1

Mineral processing wastewater contains large amounts of reagents which can lead to severe environmental problems, such as high chemical oxygen demand (COD). Inspired by the wastewater treatment in such industries as those of textiles, food, and petrochemistry, in the present work, electrocoagulation (EC) is applied for the first time to explore its feasibility in the treatment of wastewater with an initial COD of 424.29 mg/L from a Pb/Zn sulfide mineral flotation plant and its effect on water reuse. Typical parameters, such as anode materials, current density, initial pH, and additives, were characterized to evaluate the performance of the EC method. …