Chemical Engineering Commons^™

Graphite Exfoliation By Supercritical Carbon Dioxide Extraction, Chaiyaporn Wattanaprayoon

Dissertations, Master's Theses and Master's Reports - Open

Supercritical carbon dioxide is used to exfoliate graphite, producing a small, several-layer graphitic flake. The supercritical conditions of 2000, 2500, and 3000 psi and temperatures of 40°, 50°, and 60°C, have been used to study the effect of critical density on the sizes and zeta potentials of the treated flakes. Photon Correlation Spectroscopy (PCS), Brunauer-Emmett-Teller (BET) surface area measurement, field emission scanning electron microscopy (FE-SEM), and atomic force microscopy (AFM) are used to observe the features of the flakes. N-methyl-2-pyrrolidinone (NMP), dimethylformamide (DMF), and isopropanol are used as co-solvents to enhance the supercritical carbon dioxide treatment. As a result, the …

Modeling Of Diesel Particulate Filter Filtration And Regeneration For Transient Driving Schedules, Di Huang

Dissertations, Master's Theses and Master's Reports - Open

Due to their high thermal efficiency, diesel engines have excellent fuel economy and have been widely used as a power source for many vehicles. Diesel engines emit less greenhouse gases (carbon dioxide) compared with gasoline engines. However, diesel engines emit large amounts of particulate matter (PM) which can imperil human health. The best way to reduce the particulate matter is by using the Diesel Particulate Filter (DPF) system which consists of a wall-flow monolith which can trap particulates, and the DPF can be periodically regenerated to remove the collected particulates.

The estimation of the PM mass accumulated in the DPF …

Purification Of Synthetic Oligomers, Shiyue Fang

Michigan Tech Patents

This invention provides a novel method for purifying synthetic oligomers comprising capping, polymerizing and separating any failure sequences produced during oligomer synthesis. Either the failure sequence or the full-length oligomer may be polymerized. Optionally, small molecule impurities may also be incorporated into the polymerized material. The invention provides novel capping agents having a polymerizable functional group. The invention also provides kits comprising at least one composition of the present invention.

In-Plane Thermal Conductivity Modeling Of Carbon Filled Liquid Crystal Polymer Based Resins, Tayloria N. G. Adams

Dissertations, Master's Theses and Master's Reports - Open

Adding conductive carbon fillers to insulating thermoplastic resins increases composite electrical and thermal conductivity. Often, as much of a single type of carbon filler is added to achieve the desired conductivity, while still allowing the material to be molded into a bipolar plate for a fuel cell. In this study, varying amounts of three different carbons (carbon black, synthetic graphite particles, and carbon fiber) were added to Vectra A950RX Liquid Crystal Polymer. The in-plane thermal conductivity of the resulting single filler composites were tested. The results showed that adding synthetic graphite particles caused the largest increase in the in-plane thermal …

2009-2010 Che Newsletter, Department Of Chemical Engineering, Michigan Technological University

Department of Chemical Engineering Newsletters

Table of Contents

• Department
• Students
• Alumni and Friends
• Faculty and Staff
• Industrial Advisory Board

2008-2009 Che Newsletter, Department Of Chemical Engineering, Michigan Technological University

Department of Chemical Engineering Newsletters

Table of Contents

• Department
• Faculty
• Research
• Alumni & Friends
• 2008 Industrial Advisory Board
• Convocation
• Student News

Estimation Of The Flammability Zone Boundaries With Thermodynamic And Empirical Equations, Travis Joseph Hansen

Dissertations, Master's Theses and Master's Reports - Open

The flammability zone boundaries are very important properties to prevent explosions in the process industries. Within the boundaries, a flame or explosion can occur so it is important to understand these boundaries to prevent fires and explosions. Very little work has been reported in the literature to model the flammability zone boundaries. Two boundaries are defined and studied: the upper flammability zone boundary and the lower flammability zone boundary. Three methods are presented to predict the upper and lower flammability zone boundaries:

The linear model

The extended linear model, and

An empirical model

The linear model is a thermodynamic model …

Fall 2006 Che Newsletter, Department Of Chemical Engineering, Michigan Technological University

Department of Chemical Engineering Newsletters

Table of Contents

• CPM awarded First Place in Competition
• Letter from the Chair
• Sandell Recipient of Distinguished Teaching Award
• New Inductees for Chemical Engineering Distinguished Academy Honored
• New Presidential Council of Alumnae Member
• Alumni Notes
• Industrial Advisory Board
• Nam Him Retires
• Building Renovations completed
• Focus on Research

Kinetic Characterization For Pretreatment Of Timber Varieties And Switchgrass Using Diluted Acid Hydrolysis, Shu Chiang Yat

Dissertations, Master's Theses and Master's Reports - Open

In recent years, growing attention has been devoted to the use of lignocellulosic biomass as a feedstock to produce renewable carbohydrates as a source of energy products, including liquid alternatives to fossil fuels. The benefits of developing woody biomass to ethanol technology are to increase the long-term national energy security, reduce fossil energy consumption, lower greenhouse gas emissions, use renewable rather than depletable resources, and create local jobs. Currently, research is driven by the need to reduce the cost of biomass-ethanol production. One of the preferred methods is to thermochemically pretreat the biomass material and subsequently, enzymatically hydrolyze the pretreated …

Enzyme Engineering Of Aminotransferases For Improved Activity And Thermostability, Abraham Rogelio Mártin García

Dissertations, Master's Theses and Master's Reports - Open

The production by biosynthesis of optically active amino acids and amines satisfies the pharmaceutical industry in its demand for chiral building blocks for the synthesis of various pharmaceuticals. Among several enzymatic methods that allow the synthesis of optically active aminoacids and amines, the use of minotransferase is a promising one due to its broad substrate specificity and no requirement for external cofactor regeneration. The synthesis of chiral compounds by aminotransferases can be done either by asymmetric synthesis starting from keto acids or ketones, and by kinetic resolution starting from racemic aminoacids or amines.

The asymmetric synthesis of substituted (S)-aminotetralin, an …

Development And Modeling Of Thermally Conductive Resins For Fuel Cell Bipolar Plate Applications, Michael G. Miller

Dissertations, Master's Theses and Master's Reports - Open

Thermally conductive resins are a class of material that show promise in many different applications. One growing field for their use is in the area of bipolar plate technology for fuel cell applications. In this work, a LCP was mixed with different types of carbon fillers to determine the effects of the individual carbon fillers on the thermal conductivity of the composite resin. In addition, mathematical modeling was performed on the thermal conductivity data with the goal of developing predictive models for the thermal conductivity of highly filled composite resins.

Fall 2004 Che Newsletter, Department Of Chemical Engineering, Michigan Technological University

Department of Chemical Engineering Newsletters

Table of Contents

• Letter from the Chair
• Michigan Tech nano research gets $1 million boost from House
• New Inductees for Chemical Engineering Distinguished Academy Honored
• Undergraduate Expo 2004- AFG takes 3rd Place in Poster Presentation
• Chem-E car Takes Second Plate in the Nationals
• Western UP Science Fair
• Sandell Joins department
• Kimojino Awarded Fellowship

Reaction Control In Quiescent Systems Of Free-Radical Retrograde-Precipitation Polymerization, Vijaya Raghavan Tirumala

Dissertations, Master's Theses and Master's Reports - Open

Free-radical retrograde-precipitation polymerization, FRRPP in short, is a novel polymerization process discovered by Dr. Gerard Caneba in the late 1980s. The current study is aimed at gaining a better understanding of the reaction mechanism of the FRRPP and its thermodynamically-driven features that are predominant in controlling the chain reaction.

A previously developed mathematical model to represent free radical polymerization kinetics was used to simulate a classic bulk polymerization system from the literature. Unlike other existing models, such a sparse-matrix-based representation allows one to explicitly accommodate the chain length dependent kinetic parameters.

Extrapolating from the past results, mixing was experimentally shown …

Method For Removal Of Ammonia From Fly Ash, Jiann-Yang Hwang

Michigan Tech Patents

A method for removing ammonia and ammonia compounds from fly ash and other combustion by-products is provided. The method may be performed with raw or processed fly ash, or it may be performed in conjunction with a wet beneficiation process. The method involves mixing the ammonia-contaminated fly ash with water and then filtering and/or drying the solution to remove the ammonia and water. The method produces fly ash having an ammonia content of less than about 60-80 ppm, which allows the fly ash to be utilized in a number of applications.

Apparatus And Method For The Generation And Use Of Ferric Ions, Donald R. Lueking, Carl C. Nesbitt

Michigan Tech Patents

An apparatus and method for the generation and use of ferric ions produced by acidophilic, chemoautotrophic bacteria.

Free-Radical Retrograde Precipitation-Polymerization Process, Gerard T. Caneba

Michigan Tech Patents

A free-radical retrograde polymerization process for forming a polymer. An admixture of reactants including predetermined amounts of a monomer, a solvent, and a free-radical-initiator is reacted. A precipitation polymerization reaction occurs such that a polymer-rich phase is at a temperature generally above the lower critical solution temperature (LCST) of the admixture.

Process For The Extracting Oxygen And Iron From Iron Oxide-Containing Ores, Surendra K. Kawatra, Timothy C. Eisele

Michigan Tech Patents

Oxygen and metallic iron are produced from an iron oxide-containing mineral, such as ilmenite, by extracting iron from the mineral with hydrochloric acid, separating solid residue from the resulting solution and drying same, electrolyzing the separated, iron chloride- containing solution to produce electrolytic iron and chlorine gas, combining the chlorine gas with water recovered from the drying and/or iron chloride-containing solution electrolysis steps of regenerate hydrochloric acid and recycling the hydrochloric acid to the extraction step. In an alternate embodiment, the chlorine gas is reacted with recovered water in the presence of a catalyst to produce hydrochloric acid which is …

Method For Treating Wood Against Fungal Attack, Peter E. Laks

Michigan Tech Patents

Complexes of sulfited tannin extract and a copper(II) ion effectively protect wood against fungal attack. The complex can be impregnated into wood in a single step treatment using a water/organic solvent system, or formed in situ by treating the wood with an aqueous solution containing the extract and subsequently treating the wood with an aqueous solution containing a copper (II) salt.

Hydrocarbon Fuel Additives And Method For Preparing Same, G. David Mendenhall, Hsiang T. Chen

Michigan Tech Patents

A compound having the general formula R*COH[- CORJj,, wherein R is a lower alkyl hydrocarbon radical, y is 0 or 1, and x is 2 when y is 1 and 3 when y is 0, is prepared by admixing carbon monoxide, a transition metal halide, and an organomonolithium compound or an anionic equivalent thereof.

Process For Recovering Terephthalic Acid From Waste Polyethylene Terephthalate, Richard A. Lamparter, Bruce A. Barna, David R. Johnsrud

Michigan Tech Patents

Terephthalic acid (TPA) is recovered from used polyethylene terephthalate beverage containers by reacting comminuted containers in a reaction zone with an aqueous medium containing ammonium hydroxide at elevated temperatures and pressures to form a water soluble diammonium salt of TP A, separating any undissolved solids from the reaction product, acidifying the remaining reaction product to liberate TP A, and separating the precipitated TPA. A portion of the liquid remaining after separation of TPA can be mixed with lime or slaked lime, the resulting mixture treated in an ammonia stripper to remove ammonia therefrom and the ammonia overheads from the stripper …

Treatment During Transport Of Solid Waste, Wayne M. Fassell

Michigan Tech Patents

The method of treatment during transport of solid waste by depositing the solid waste on the surface of a molten stream of lead traveling in one direction whereby organic material in the waste is subjected to thermal degradation, metals and other materials in the waste which are insoluble in the molten lead and of lesser specific gravity remain on the surface of the molten lead for removal and recovery while metals and other materials which are soluble in the molten lead dissolve in the molten lead for separation from the remainder while metal and materials which are insoluble in the …