Chemical Engineering Commons^™

Improving Database Quality Through Eliminating Duplicate Records, Mingzhen Wei, Andrew H. Sung, Martha E. Cather

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Redundant or duplicate data are the most troublesome problem in database management and applications. Approximate field matching is the key solution to resolve the problem by identifying semantically equivalent string values in syntactically different representations. This paper considers token-based solutions and proposes a general field matching framework to generalize the field matching problem in different domains. By introducing a concept of String Matching Points (SMP) in string comparison, string matching accuracy and efficiency are improved, compared with other commonly-applied field matching algorithms. The paper discusses the development of field matching algorithms from the developed general framework. The framework and corresponding …

Imperative Of National Savings: A Case For Adoption Of Appropriate Benchmark Price For Crude Oil., Moses F. Otu

Bullion

Budgeting involves the design of plans that aligns expected financial resources and expenditure to accomplish specific national goals and objectives. It is in this regard that this paper provides a simple framework for deriving an acceptable bench-mark price for crude oil for budgeting purposes. This is aimed at enabling the elimination of subjectivity in budgeting process and promote understanding between all the stakeholders in order to fast track the process of passage of the appropriation bill. Following a brief introduction, the paper examines the need for national saving fund and constitutional provisions for national savings. Section three focuses on the …

Feasibility Of Supercritical Carbon Dioxide As A Drilling Fluid For Deep Underbalanced Drilling Operations, Anamika Gupta

LSU Master's Theses

Feasibility of drilling with supercritical carbon dioxide to serve the needs of deep underbalanced drilling operations has been analyzed. A case study involving underbalanced drilling to access a depleted gas reservoir is used to illustrate the need for such a research. For this well, nitrogen was initially considered as the drilling fluid. Dry nitrogen, due to its low density, was unable to generate sufficient torque in the downhole motor. The mixture of nitrogen and water, stabilized as foam generated sufficient torque but made it difficult to maintain underbalanced conditions. This diminished the intended benefit of using nitrogen as the drilling …

Hydrate Dissociation During Drilling Through In-Situ Hydrate Formations, Erdem Catak

LSU Master's Theses

Natural gas hydrates are thought to be the future hydrocarbon source of the energy hungry world. Tremendous amount of research has been done to investigate the feasibility of gas production from the hydrate formations. In this direction, three basic production methods, thermal stimulation, depressurization and thermodynamic inhibitor injection have been proposed to produce hydrocarbons off the hydrates. On the other hand, they present high potential risk of drilling hazards, such as severe gasification of drilling fluid, casing collapse due to increase in pressure after dissociation of hydrate zone, and instability of ocean floor, which may cause a platform failure. Scientists …

Demonstration And Performance Characterization Of The Gas Assisted Gravity Drainage (Gagd) Process Using A Visual Method, Thaer N.N. Mahmoud

LSU Master's Theses

The Gas Assisted Gravity Drainage (GAGD) process, currently being developed at LSU, is designed to take advantage of gravity to allow vertical segregation between the injected gas and reservoir crud oil due to their density differences. GAGD is recommended for use with CO2 gas. CO2 dissolves in oil and causes both swelling and viscosity reduction of oil. The GAGD process uses the existing vertical wells for CO2 gas injection, and a horizontal well near the bottom of the payzone for oil production. GAGD, as an EOR process, is not restricted to tertiary oil recovery only. In this research study, a …

Physical Model Study Of The Effects Of Wettability And Fractures On Gas Assisted Gravity Drainage (Gagd) Performance, Wagirin Ruiz Paidin

LSU Master's Theses

The Gas-Assisted Gravity Drainage (GAGD) process was developed to take advantage of the natural segregation of injected gas from crude oil in the reservoir. It consists of placing a horizontal producer near the bottom of the reservoir and injecting gas using existing vertical wells. As the injected gas rises to the top to form a gas cap, oil and water drain down to the horizontal producer. Earlier experimental work using a physical model by Sharma had demonstrated the effectiveness of the GAGD process in improving the oil recovery when applied in water-wet porous media. The current research is an extension …

Compositional Effects On Gas-Oil Interfacial Tension And Miscibility At Reservoir Conditions, Daryl Sean Sequeira

LSU Master's Theses

Minimum miscibility pressure (MMP) is an important optimization parameter for an enhanced oil recovery process involving Carbon Dioxide or hydrocarbon gas injection. Therefore an accurate experimental measurement is required to determine the MMP. The MMP for a gas-oil system is directly related to the interfacial tension between the injected gas and the reservoir crude oil. When CO2 gas contacts the reservoir oil at reservoir temperature, the interfacial tension between the fluid-fluid phases reduces as the miscibility is approached and the interface between the fluid-fluid phases eventually disappears at miscibility i.e. the interfacial tension becomes zero. Hence, a pressure condition of …

Hydrogeophysical Investigation At Luxor, Southern Egypt, Ahmed Ismail, Neil Lennart Anderson, J. David Rogers

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Over the past 35 years, the exposed stone foundations of the ancient Egyptian monuments at Luxor have deteriorated at an alarmingly accelerated rate. Accelerated deterioration is attributable to three principal factors: 1) excavation and exposure of foundation stone; 2) construction of the Aswan High Dam; and 3) changes in the regional groundwater regime. In an effort to better elucidate the hydrostratigraphy in the Luxor study area that extends from the River Nile to the boundaries of the Nile Valley and covers about 70 km², a geophysical/hydrological investigation was conducted. Forty Schlumberger vertical electrical soundings (VES), two approximately 6 …

Controlled High Pressure Slurry Injection In Water Jetting Applications-A New Approach, Manish Kumar

LSU Master's Theses

The ability of an abrasive assisted water jet to cut through rocks and metals has potential applications in the oilfield. However, the size of cutting nozzle has not allowed water jet to be used on commercial scale for drilling reservoir rocks down-hole. Inefficient momentum transfer to abrasive particles from pressurized water and lack of abrasive feed rate control in commercially available units has further discouraged the use of water jet in oil industry. Despite various technical difficulties, immense power of water jet cannot be neglected. Studies have shown that momentum transfer can be improved significantly, if abrasive particles are introduced …

Physical Model Experiments Of The Gas-Assisted Gravity Drainage Process, Amit P. Sharma

LSU Master's Theses

The displacement of oil by gas injection in oil reservoirs is an attractive method of improved oil recovery. Commercial gravity-stable gas injection projects have demonstrated excellent recoveries; however, their application has been limited to dipping reservoirs and pinnacle reefs. Horizontal gas floods and the water alternating gas (WAG) processes, practiced in horizontal type reservoirs, have yielded less than satisfactory recoveries of 5-10%. The Gas Assisted Gravity Drainage (GAGD) Process being developed at LSU extends the concept of gravity-stable gas floods to horizontal type reservoirs to improve volumetric sweep and oil recovery. This experimental study consists of a series of visual …

Relative Permeability And Wettability Implications Of Dilute Surfactants At Reservoir Conditions, Ayodeji Adebola Abe

LSU Master's Theses

The improvement or increase of oil recoverable from discovered reservoirs has always been a very important issue as this helps to meet ever growing energy demand. Several methods have been put forward as means of achieving this objective. Chemical flooding, using surfactants has been considered in enhanced oil recovery processes. Surfactants are used primarily to lower oil-water interfacial tension (IFT) and thus improve production. However, surfactants possess the ability to alter rock wettability and hence increase oil production. Previous investigations were performed at ambient conditions using stocktank oil. Extrapolation of the findings from the ambient conditions testing to reservoir conditions …

Use Of Orthogonal Arrays, Quasi-Monte Carlo Sampling And Kriging Response Models For Reservoir Simulation With Many Varying Factors, Subhash Kalla

LSU Master's Theses

Asset development teams may adjust simulation model parameters using experimental design to reveal which factors have the greatest impact on the reservoir performance. Response surfaces and experimental design make sensitivity analysis less expensive and more accurate, helping to optimize recovery under geological and economical uncertainties. In this thesis, experimental designs including orthogonal arrays, factorial designs, Latin hypercubes and Hammersley sequences are compared and analyzed. These methods are demonstrated for a gas well with water coning problem to illustrate the efficiency of orthogonal arrays. Eleven geologic factors are varied while optimizing three engineering factors (total of fourteen factors). The objective is …

Analysis Of Alternative Well Control Methods For Dual Density Deepwater Drilling, Mikolaj Stanislawek

LSU Master's Theses

The recent push into deepwater is currently limited by high drilling costs resulting from conventional well designs. As a result, dual gradient drilling methods have been proposed. This research investigates riser gas-lift as a potential means to implement a dual gradient system. A primary concern is well control in a system containing so many different density fluids and different flow paths. The specific concerns addressed in this study were kick detection, cessation of formation feed-in, removal of kick fluids, and re-establishing hydrostatic control with a constant bottom hole pressure method. These concerns were studied using a transient, multiphase simulator whose …

Experimental Investigation Of Dynamic Interfacial Interactions At Reservoir Conditions, Wei Xu

LSU Master's Theses

Much of the research on wettability in the existing literature has been done using stocktank oils and at ambient conditions. The main objective of this study is therefore to examine the validity of ambient measurements in inferring in-situ reservoir wettability. For this purpose, Drop-Shape-Analysis for interfacial tension and Dual-Drop-Dual-Crystal (DDDC) contact angle measurements have been carried out using dolomite rock, Yates reservoir stocktank and live crude oils and Yates synthetic brine at Yates reservoir conditions of 82oF and 700 psi. Two types of surfactants (nonionic and anionic) in varying concentrations have been used to study the effect of surfactants on …

Enhanced Gas Recovery Using Pressure And Displacement Management, Thomas Walker

LSU Master's Theses

The work contained in this thesis combines two previous enhanced gas recovery techniques; coproduction of water and gas from water-drive reservoirs and waterflooding of low pressure gas reservoirs. These two techniques allow the control of reservoir pressure and sweep efficiency through planed production or injection of water. A recovery optimization method, which is applicable to any gas reservoir, was developed using the concept of pressure and displacement management (PDM). Two simulation studies were conducted, using Eclipse©, to investigate recovery optimization by coproduction and waterflooding. From the coproduction study it was determined that the water production rate needed to optimize recovery …

Experimental Investigation Of Drilling Fluid Formulations And Processing Methods For A Riser Dilution Approach To Dual Density Drilling, John Shelton

LSU Master's Theses

Oil and natural gas resources in the deepwater Gulf of Mexico are important for the U.S. economy, but development is limited by high costs. Dual density drilling concepts that result in wellbore pressure gradients similar to the natural subsurface gradients can simplify well designs and reduce costs. Riser dilution may be an economical means of achieving such a system. This system would use a low density fluid to dilute the weighted wellbore fluid and give an intermediate density fluid in the riser. Two key concerns addressed in this study are whether a drilling fluid can be formulated that will suspend …

Geostatistical Integration Of Geophysical, Well Bore And Outcrop Data For Flow Modeling Of A Deltaic Reservoir Analogue, Hong Tang

LSU Doctoral Dissertations

Significant world oil and gas reserves occur in deltaic reservoirs. Characterization of deltaic reservoirs requires understanding sedimentary and diagenetic heterogeneity at the submeter scale in three dimensions. However, deltaic facies architecture is complex and poorly understood. Moreover, precipitation of extensive calcite cement during diagenesis can modify the depositional permeability of sandstone reservoir and affect fluid flow. Heterogeneity contributes to trapping a significant portion of mobile oil in deltaic reservoirs analogous of Cretaceous Frontier Formation, Powder River Basin, Wyoming. This dissertation focuses on 3D characterization of an ancient deltaic lobe. The Turonian Wall Creek Member in central Wyoming has been selected …

Long Term Pressure Behavior In Turbidite Reservoirs, Feng Wang

LSU Doctoral Dissertations

In this study, we investigated several possible mechanisms that would give rise to the anomalous pressure behavior (early concave-up on Horner plot or upward drift on the derivative curve of the log-log plot and asymmetry between the pressure drawdown and buildup behavior) sometimes encountered in the turbidite reservoirs in GOM primarily using numerical simulation and 2-level experimental designs. We ascertained the most influential parameters to the pressure behavior and identified that multilayer commingled system and the leaky compartment model are the most probable mechanisms to cause the anomalous behavior due to layer or zone property contrast to a certain degree. …

Shaly Sand Interpretation Using Cec-Dependent Petrophysical Parameters, Fnu Kurniawan

LSU Doctoral Dissertations

This research explores the characterization of petrophysical parameters such as cementation exponent, saturation exponent and effective porosity as a function of cations exchange capacity (CEC), and its impact on shaly sand interpretation. Experimental and field data were used in the study. The latest LSU model for shaly sand interpretation uses of two cementation exponents, mf and mc, to represent the tortuosity of electric current path in free water and clay bound water, respectively. Experimental measurements on three types of rock, clean sand, shaly sand and pure shale using different brine salinity, were conducted to validate the use of these two …

Measurement And Modeling Of Fluid-Fluid Miscibility In Multicomponent Hydrocarbon Systems, Subhash C. Ayirala

LSU Doctoral Dissertations

Carbon dioxide injection has currently become a major gas injection process for improved oil recovery. Laboratory evaluations of gas-oil miscibility conditions play an important role in process design and economic success of field miscible gas injection projects. Hence, this study involves the measurement and modeling of fluid-fluid miscibility in multicomponent hydrocarbon systems. A promising new vanishing interfacial tension (VIT) experimental technique has been further explored to determine fluid-fluid miscibility. Interfacial tension measurements have been carried out in three different fluid systems of known phase behavior characteristics using pendent drop shape analysis and capillary rise techniques. The quantities of fluids in …

Optimal Operating Strategy For Wells With Downhole Water Sink Completions To Control Water Production And Improve Performance, Ozan Arslan

LSU Doctoral Dissertations

Downhole water sink (DWS) technology is an alternative to conventional limited-entry completions to control water production in wells with bottom water drive. DWS wells comprise two completions: the bottom completion produces water and keeps the top completion open to oil inflow. The system performance depends on careful manipulation of the top and bottom rates to maximize oil productivity and produce oil-free water from the bottom completion. Conventional nodal analysis cannot provide a solution for DWS wells because the critical rates for water coning change with water drainage rate. A reservoir simulator is used to model two-phase flow to the dual …

Multiphase Mechanisms And Fluid Dynamics In Gas Injection Enhanced Oil Recovery Processes, Madhav M. Kulkarni

LSU Doctoral Dissertations

Currently, the Water-Alternating-Gas (WAG) process is the most widely practiced horizontal mode gas injection process in the industry. Although this process is conceptually sound, it has resulted in low (5 – 10%) oil field recoveries. Conversely, the gravity stable mode of gas injection has carved its niche as one of the most effective methods of gas injection EOR in the dipping reservoirs and pinnacle reefs. The Gas Assisted Gravity Drainage (GAGD) process is therefore being developed at LSU to extend these highly successful gravity stable applications to horizontal type reservoirs. The dissertation attempts to address six key questions: (i) do …

Fatigue Of Drill Pipes Used In Horizontal Directional Drilling, Feibai Ma

Doctoral Dissertations

Fatigue is the most common cause of mini-HDD drill rod failure. It can occur at stress levels far below the normal operating stress in most drill stem components. Fatigue failures occur because the drill rod, after it has been forced into a curved path, undergoes a cyclic bending stress oscillating from tension to compression in concert with the other stress components caused by torque, thrust, or pullback.

When a rod breaks underground, there is considerable extra cost caused by the delay in “fishing” out the broken rod as well as the cost of replacing the rod. On the other hand, …

Effect Of Plasma Flux Composition On The Nitriding Rate Of Stainless Steel, Christopher Muratore, Scott G. Walton, D. Leonhardt, Richard F. Fernsler, David D. Blackwell, R. A. Meger

Chemical and Materials Engineering Faculty Publications

The total ion flux and nitriding rate for stainless steel specimens exposed to a modulated electron beam generated argon-nitrogen plasma were measured as a function of distance from the electron beam axis. The total ion flux decreased linearly with distance, but the nitriding rate increased under certain conditions, contrary to other ion flux/nitriding rate comparisons published in the literature. Variation in ion flux composition with distance was explored with a mass spectrometer and energy analyzer as a possible explanation for the anomalous nitriding rate response to ion flux magnitude. A transition in ion flux composition from mostly N2 1 to …

A Re-Evaluation Of Geopressured-Geothermal Aquifers As An Energy Resource, Jeremy Scott Griggs

LSU Master's Theses

The search for more efficient and economical forms of energy generation is a continual process. Natural gas production and electricity generation from geopressured-geothermal aquifers is an unconventional hydrocarbon source that has long been unproductive due to its marginal economics and lack of technological certainty. This thesis demonstrates that, based on modern technological competencies and economic constraints, geopressured-geothermal energy now maintains a viable future as an alternative domestic energy source.

Trajectory And Window Width Predictions For A Cased Hole Sidetrack Using A Whipstock, Harshad Prakash Patil

LSU Master's Theses

The Trackmaster system manufactured by Smith Services consists of a multi-ramped whipstock and a trimill assembly used to perform a sidetrack from a cased well. Smith Services has observed evidence that the trimill assembly may prematurely leave the face of the whipstock and build excess inclination and dogleg severity or may fall into the original well immediately after leaving the end of the whipstock ramp thus creating a need to predict the borehole trajectory for sidetracking operations. The goal of this project was to predict the borehole trajectory and the window profile cut in the casing by the sidetracking equipment …

Evaluation Of New Methods For Processing Drilling Data To Determine The Cause Of Changes In Bit Performance, Jaime Solano

LSU Master's Theses

Drilling operations represent the major cost in finding and developing new petroleum reserves. Poor drilling performance when drilling deep shale and strong rocks, as evidenced by slow rate of penetration (ROP), has a significant detrimental impact on drilling costs. Also, it has been concluded that bit balling is the main cause of low ROP when drilling deep, clay-rich shale with water-based mud. In addition, it is estimated that a potential saving in drilling cost of hundreds of millions of dollars a year can be obtained if bit balling is mitigated and ROP is improved. Several methods have been developed in …

Removal Of Sustained Casing Pressure Utilizing A Workover Rig, Kevin Soter

LSU Master's Theses

This thesis will analyze the techniques used during the 1989 and 1990 workover programs as well as subsequent operations in 1991/1992. It will also present the techniques and results of the most recent 1999 workover program undertaken to alleviate the most persistent sustained casing pressure (SCP) in a mature Gulf of Mexico field. An extensive literature review is included to better illustrate the complexity of the issues involved and possible SCP mechanisms. The field was drilled during the 1980’s and SCP has been prevalent in some cases previous to initial completion operations. Previous remedial programs resulted in limited success in …

An Experimental Study Of The Applicability Of Flooding Phenomena To The Dynamic Lubrication Method Of Well Control, Rishi R. Ramtahal

LSU Master's Theses

This research investigates the feasibility of the dynamic lubrication method of well control as an alternative to conventional stepwise lubrication. The applicability of flooding phenomena to dynamic lubrication and its use in an optimization method to maximize pumping rates was also investigated. An experimental approach was taken in which experiments were conducted in a 13’ long laboratory apparatus designed to emulate the geometry in a wellhead and also in a full-scale research well. The laboratory experiments were conducted to visually investigate the mechanism of flooding and derive a flooding correlation applicable to this type of system. The full-scale experiments were …

Immiscible And Miscible Gas-Oil Displacements In Porous Media, Madhav Mukund Kulkarni

LSU Master's Theses

Gas Injection is the second largest EOR process in U.S. To increase the extent of the reservoir contacted by displacing fluids, gas and water are injected intermittently - water-alternating-gas (WAG) process, is widely practiced. This experimental study is aimed at evaluating the WAG process performance in short and long cores as a function of gas-oil miscibility and brine composition. This performance evaluation has been carried out by comparing oil recoveries between WAG injection and continuous gas injection (CGI). Miscible (2500 psi) and immiscible (500 psi) floods were conducted using Berea cores, n-Decane and two different brines, namely the commonly used …