Chemical Engineering Commons^™

Numerical Simulations For Wellbore Stability And Integrity For Drilling And Completions, Nevan Christopher Himmelberg

Masters Theses

"Conventional wellbore trajectory planning is commonly based on an Andersonian state of stress [SoS] and the optimum well azimuth and inclination for a specific depth can be determined using stereographic projections of the safe mud weight window. In this thesis a new methodology using the complete stress tensor is developed to determine optimal well trajectories for complex in-situ stress scenarios. This study uses a 3D finite element analysis to simulate the SoS based on an integrated 3D MEM. The model yields the complete stress tensor at every location for a planned future well path. Using standard equations to determine the …

An Analytical Pressure Model To Guide Downhole Sensor Placement For Carbon Dioxide Sequestration Monitoring, Yilin Mao

Masters Theses

"Injecting CO₂ into saline aquifers is currently the most viable approach to mitigate global greenhouse gas effect. Various monitoring techniques are required to achieve 99% accuracy in determining the location of the injected CO₂ plume. Sensor locations are critical to the monitoring quality necessary to meet this requirement but have scarcely been discussed. The pressure profile needs to be modeled accurately at the initial stage of CO₂ injection to guide sensor locations. The objective of this thesis was to develop an analytical solution for CO₂ sequestration based on time and distance. This will guide the locations of downhole pressure sensors …

Investigation Of Cased Wellbore Integrity In The Wabamun Area Sequestration Project, Benjamin Lee Weideman

Masters Theses

"Loss of cased wellbore integrity can cause many significant problems, including lost production, aquifer contamination, blowouts, and other environmental damage. The objective of this study is to conduct an analysis of the Wabamun Area Sequestration Project (WASP) to determine if wells in that area are suitable for CO₂ sequestration. This was done by conducting laboratory experiments on the common cement compositions found in the area, simulating the various conditions possible in a wellbore, and by analyzing three case studies from the WASP. The cases include two existing production wells and a proposed injection well specifically designed for CO₂ sequestration. This …

Data Mining And Statistical Analysis Of Completions In The Canadian Montney Formation, Mustafa Adil Al-Alwani

Masters Theses

"This thesis documents a data-mining study and statistical analysis of well completion methods and their impact on production for more than 3300 horizontal wells in the Canadian Montney resource play.

The statistical software JMP is used to analyze well and production data for both horizontal Montney gas and oil wells, examining production trends with changes in completion parameters, such as the type of completion, fluid volume pumped, proppant load, number of fracture stages and completion costs. The analysis also provides a general understanding of average treatment characteristics, and how completions have changed with time for the Montney play.

Among the …

Influence Of Erosional Unloading On The State Of Stress For Low Amplitude Single-Layer Buckle Folds - Implications For Tensile Fracture Occurrence, Mengke Li

Masters Theses

"The existence of fractures associated to buckle folds is related to the strain distribution of the fold. The erosional unloading process can amplify the remnant strain in the folded layer. Two-dimensional plane strain Finite Element Analysis (FEA) is used to investigate the influence of the erosional unloading step on both the evolution of the state of stress and the associated failure patterns in low amplitude buckle folds. Sensitivity analyses on different input parameters, including viscosity, shortening ratio, and overburden pressure, are performed. Based on the simulation results, tensile stress can be initiated both in the crest and in the limb …

Performance Comparison Of Transverse And Longitudinal Fractured Horizontal Wells Over Varied Reservoir Permeability, Fen Yang

Masters Theses

"Since the first application in the mid-1980's, multiple fractured horizontal wells have proven to be an effective means of extracting hydrocarbons. These wells require careful consideration of wellbore orientation relative to the horizontal principle stress. Wellbore orientation can lead to transverse fractures which are perpendicular to the wellbore, or longitudinal fractures parallel the wellbore. Questions arise regarding whether one fracture orientation is consistently preferred over the other, or if certain conditions affect the choice.

Historical work has examined the impact of horizontal wellbore azimuth in the Barnett and Marcellus Shale where public data was reviewed and statistical well analysis was …

Effects Of Drill-Pipe Whirling Motion On Cuttings Transport Performance For Horizontal Drilling, Yasin Demiralp

LSU Master's Theses

Dispersion, deposition, and suspension of particulate materials in the carrier fluid play a significant role in the oil industry. Increasing the cuttings transport performance in deviated wells is difficult due to the rolling/sliding transport, and cuttings settling on the low side of the annulus. Insufficient cuttings transport may lead to some crucial problems such as pipe sticking, increasing in torque and drag, material damage and bed cementing quality. Increasing flow rates and improving mud properties may not be applicable for a proper hole cleaning because of the hydraulic and mechanical limitations. In such cases, additional pressure may be generated, and …

Effect Of Forced Flow Oscillation On Churn And Annular Flow In Vertical Wellbores, Catalina Posada

LSU Master's Theses

Producing oil and gas from marginal hydrocarbon reservoirs and mature fields present particular challenges. One of the challenges for these types of fields is flow instability. Pipeline risers and artificial gas-lift systems experience instabilities, which cause significant reductions in production among others operational drawbacks. Different types of instabilities (static and dynamic) have been identified affecting those systems. However, there is still a lack of systematic investigations associated with the understanding of dynamic instabilities (periodic oscillations) and their impact in production systems. A systematic investigation of the effects of periodic forced oscillations on gas-liquid flows in a 42 m (140-ft) long, …

Time Lapse Seismic Observations And Effects Of Reservoir Compressibility At Teal South Oil Field, Nayyer Islam

Dissertations, Master's Theses and Master's Reports - Open

One of the original ocean-bottom time-lapse seismic studies was performed at the Teal South oil field in the Gulf of Mexico during the late 1990’s. This work reexamines some aspects of previous work using modern analysis techniques to provide improved quantitative interpretations. Using three-dimensional volume visualization of legacy data and the two phases of post-production time-lapse data, I provide additional insight into the fluid migration pathways and the pressure communication between different reservoirs, separated by faults. This work supports a conclusion from previous studies that production from one reservoir caused regional pressure decline that in turn resulted in liberation of …

Evaluation Of Cotton Valley "D" Sand Production In Stampede Field, Mississippi, U.S.A., Patrick Lawrence Murphy

Electronic Theses and Dissertations

No abstract provided.

Spatial Moment Analysis Of Reactive And Radioactive Solute In River System With Layered Porous Bed, Shadab Anwar

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Mass exchange between river stream and riverbed is critical towards remediation of contaminated river system. Spatial moment analysis of reactive and radioactive solute in river channel with underlying porous bed is applied to understand the qualitative description of solute plume in riverbed and river stream. Semi-analytical solutions for zeroth-, first- and second-order spatial moment of reactive and radioactive solute are derived in Laplace domain. The spatial moments of concentration are numerically inverted. Parabolic velocity in river channel and exponentially decaying velocity in porous bed are linked using a slip velocity at the interface. The model is verified against the semi-analytical …

Updated Screening Criteria For Steam Flooding Based On Oil Field Projects Data, Mariwan Qadir Hama

Masters Theses

"Enhanced oil recovery (EOR) screening is considered the first step in evaluating potential EOR techniques for candidate reservoirs. Therefore, as new technologies are developed, it is important to update the screening criteria. Many of the screening criteria for steam flooding that have been described in the literature were based on data collected from EOR surveys biennially published in the Oil & Gas Journal. However, these datasets contain some problems, including outliers, missing data, inconsistent data and duplicate data, that could affect the accuracy of the results. Despite the importance of ensuring the quality of a dataset before running analyses, data …

Data Analysis And Summary For Surfactant-Polymer Flooding Based On Oil Field Projects And Laboratory Data, Pratap D. Chauhan

Masters Theses

"Enhanced oil recovery screening is considered as an important first step towards evaluating a potential EOR technique for a candidate reservoir. A vast amount of research is continuously been conducted in EOR. Therefore, it is imperative to update the screening criteria regularly.

This study involves updating the screening criteria for surfactant polymer flooding for field projects dataset and laboratory dataset. Many of the screening criteria for surfactant-polymer flooding in the literature were achieved on the basis of data collected from the EOR surveys published biennially in Oil & Gas Journals. However, these datasets contain problems like missing data and inconsistent …

Gel Treatment Field Application Survey For Water Shut Off In Production Wells, Jingyi Liao

Masters Theses

"Enhanced oil recovery (EOR) screening criteria are considered as a guideline for candidate evaluation and determination. Not many screening criteria for gel treatment had been published. Some published gel treatment application surveys for water shut off only include limited number of oil fields and locations.

The current work aims to summarize the worldwide gel treatment applications for water shut off in production wells by creating and analyzing a dataset from a variety of sources. This study started from collecting and cleaning the gel treatment application data. All the data were from SPE field publications from 1990 to 2012 and from …

A Circuit-Based Algorithm For Two-Phase Flow At The Pore Scale In Porous Media, Todd Dorethy

Open Access Theses & Dissertations

Models of two-phase flow in porous media are of practical interest in many fields of science and engineering such as in oil recovery and hydrology. For this class of problem, an immiscible fluid is injected into a single-phase, porous medium to evict its valuable, native fluid. Because the aim is to amass as much of the indigenous fluid as possible, models attempt to output reliable flow regime patterns depicting how well the invading fluid displaces the native fluid.

Flow regime patterns generally depend upon the geometry of the domain, stimulation at the boundaries, and properties of the invading and native …

Impact Of Slickwater Fracturing Fluid Compositions On The Petrophysical Properties Of Shale And Tightsand, Yongpeng Sun

Doctoral Dissertations

"A tight reservoir always requires hydraulic fracturing before production to increase production rate. The additives in hydraulic fluids are highly considerable for a successful stimulation. A friction reducer is often used to reduce the flowing friction in the wellbore during hydraulic fracturing. Extensive researches have been conducted to examine the extent it can reduce the fluid friction in tubings; however, no research has been reported on its behavior in a reservoir, which is related to the fracture extension. A breaker is also pumped into the formation to degrade the friction reducer. However, it is not clear that what is the …

Preformed Particle Gel Transport Through Fractures, Hao Zhang

Doctoral Dissertations

"Polymer gel treatment is one of the most cost-effective methods to control water production in mature oil fields. The main objective of gel treatments is to reduce water or gas flow through high-permeability channels or fractures without damaging productive zones. Preformed particle gels (PPGs) have been applied for conformance control because they can overcome some potential drawbacks inherent in an in-situ gelation system.

In this study, lab experiments were performed to quantify PPG propagation through fractures and fracture-like channels by using screen models and open fracture models. The main findings in these experiments can guide the selection of best particle …

Study And Pilot Test On A Novel Eor Method - Coupling Ppg Conformance Control And Surfactant Flooding, Farag Awadh Muhammed

Doctoral Dissertations

"The interest in enhanced oil recovery (EOR) methods has re-emerged in recent years; however, significant challenges remain for the widespread deployment of these methods. One major downside to the successful application of EOR technologies in mature reservoirs is conformance problems (e.g. heterogeneity). To mitigate these problems, a novel EOR method which couple preformed particle gel (PPGs) conformance treatment with traditional surfactant flooding in one process is introduced.

This dissertation provides a comprehensive study for the proposed method. A series of laboratory tests were carried out to understand the chemical interaction between PPGs and surfactants. A new method to evaluate PPGs …

Studies Of Influencing Factors For Shale Gas Reservoir Performance, Jiaqi Wang

Masters Theses

"Shale gas resource plays a significant role in energy supply worldwide. For economic production of shale gas, technologies of horizontal well and hydraulic fracturing are used for shale gas reservoirs. Therefore, the productivity of the shale gas reservoirs will be influenced by both reservoir condition, and hydraulic fracture properties.

In this thesis, parameters that will influence shale gas production were classified into two categories: reservoir properties and hydraulic fracture properties. Published shale gas simulation studies were surveyed for determining the typical ranges of those properties. CMG-GEM was employed to finish the reservoir simulation work, and CMG-CMOST was used to complete …

Computational Fluid Dynamics (Cfd) Modeling Of Proppant Transport In A Plug-And-Perf Completion With Different Perforation Phasing, Jinlin Zhang

Masters Theses

"Perf-and-plug is a completion technique commonly used in multistage fracturing. Fracture performance modeling assumes that fluid and proppant distributes uniformly among all perforations along the length of the wellbore in a plug and perf completion Crespo et al. (2012) has conducted a limited proppant flow experiment using a 63 foot stage, and three 0.42 inch, zero phased simulated perforations. His work demonstrates proppant does not distribute evenly, but the work is limited to a single perforation scheme.

In this study, Computational Fluid Dynamics (CFD) software has been used to simulate proppant transport and distribution in a single stage of a …

Evaluation Of Prosper For Modeling Long Lateral Gas Well Productivity In Toe Up, Toe Down, Horizontal Well Geometry, Abdussalam Mahmoud Mohamed

Masters Theses

"Most horizontal wells are not truly horizontal and may be drilled 'toe-up' or 'toe-down' to follow geological formations or in an attempt to keep the well from loading up. Challenges in directional drilling may also lead to horizontal gas wells with undulating wellbore profiles. This wellbore profile creates natural traps for heavy fluids in the lows and light fluid in the highs, which may result in chocked production. Hence, there is an interest in determining the best wellbore trajectory - toe-up, horizontal, or toe-down - for well unloading.

This study evaluates the capability of the well productivity software PROSPER to …

The Effect Of Using Different Rock Failure Criteria In Wellbore Stability Analysis, Reza Rahimi

Masters Theses

"Determination of the appropriate drilling fluid density by rock failure analysis is an essential step to control wellbore instability. To determine wellbore failure stresses, the rock strength has to be known, an appropriate constitutive model has to be selected, and finally an accurate rock failure criterion must be chosen. Linear-poro elastic modeling of the mechanical wellbore failure is the most common approach to investigate wellbore instability. Numerous failure criteria have been used for the rock failure analysis but there is not any commonly accepted agreement of which failure criteria to use. Rock failure criteria differ in two main characteristics. First, …

Natural Selectivity Of Nickel And Vanadium In Crude Oil, Olienka P. De La O Fernandez

Open Access Theses & Dissertations

Nickel and Vanadium have always been found in crude oil all around the world. The metal content is found mainly in porphyrin structures in the asphaltene fraction of the petroleum. In order to determine the reason for this natural preference, a set of experiments testing thermodynamics, kinetics, and other factors were performed. Candidate metalloporphyrins containing Vanadyl, Chromium, Iron, Nickel, Copper and Zinc were analyzed through chemical reactions characterized using Silica Column Chromatography, HPLC, MS and UV-Visible. Theoretical analysis of the stability of metalloporphyrins was conducted using DFT/NRLMOL for computational calculation. The analysis of all factors leads us to conclude that …

Modeling Of Foam Flow In Porous Media For Subsurface Environmental Remediation, Seungjun Lee

LSU Doctoral Dissertations

Among numerous foam applications in a wide range of disciplines, foam flow in porous media has been spotlighted for improved/enhanced oil recovery processes in petroleum-bearing geological formations and shallow subsurface in-situ NAPL (non-aqueous phase liquid) environmental remediation in contaminated soils and aquifers. In those applications, foams are known to reduce the mobility of gas phase by increasing effective gas viscosity and improve sweep efficiency by mitigating subsurface heterogeneity. This study investigates how surfactant/foam process works fundamentally for environmental remediation purpose by using MoC (Method of Characteristics) based foam modeling and simulation techniques. It consists of two main parts: Part 1, …

Quantifying Phase Configuration Inside An Intact Core Based On Wettability Using X-Ray Computed Tomography, Dinara Dussenova

LSU Master's Theses

The ability to evaluate rock and fluid properties on the order of a few microns opens new areas in reservoir engineering and reservoir simulation. Multiple studies have been done on the application of x-ray computed tomography (microCT) for the pore-scale evaluation of fluid interfaces and rock-fluid interaction. A majority of the fluid flow governing interactions occur at the pore scale level and is usually overseen on large reservoir scales. Hence, it is important to carefully investigate such interactions. Multi-fluid-phase distribution and interaction of two immiscible fluids such as oil and water is one of the most important and constantly investigated …

Experimental Assessment Of Expandable Casing Technology As A Solution For Microannular Gas Flow, Darko Kupresan

LSU Master's Theses

Microannular gas flow in the wellbore is known to be one of the major reasons for Sustained Casing Pressure (SCP). Low success rate (under 50%) of costly remedial cementing operations and increasing difficulty in sealing off problematic areas motivated the industry to look for more practical remediation solutions. Expandable casing technology is one of those new proposed techniques. A bench-scale physical model tested the potential of expandable casing technology for remediation of microannular gas migration. The composite samples with pipe-inside-pipe cemented annulus were designed to simulate a wellbore system including a pre-manufactured microannulus on the inner pipe/cement interface. Multi-rate flow-through …

Experimental Assessment Of Cement Integrity Under Thermal Cycle Loading Conditions In Geopressured Geothermal Reservoirs, Kolawole Saheed Bello

LSU Master's Theses

The number of well integrity issues increase as wells are exposed to severe downhole conditions and have longer lifetimes. Techniques for heat extraction from geopressured geothermal reservoirs involve production of hot water and injection of cold water which expose downhole materials to harsh cyclic temperature variations. Heating and cooling make the cement expand and contract as a result of thermal expansion. This volumetric change can influence cement sheaths causing them to fail. Failure of annular cement sheaths can introduce well integrity issues and subsequently lead to sustained casing pressure. This study measures the effect of cyclic thermal loading of cement …

Investigating Different Coding Environments For Simplified Reservoir Characterization Models, Atheer Mohammad Al Attar

LSU Master's Theses

Reservoir characterization is one of the most important tasks that determines the recovery plan for a specific reservoir. This process incorporates a significant amount of data acquisition and processing to finally develop an acceptable model that matches the production history and can forecast the future production behavior. The model also should be able to adapt to changes along the way: adding or removing producers or injectors, changing the injection pattern, recompletions and converting wells are all examples of possible changes that are common in the oil and gas industry. Usually these changes are modeled by running field-scale simulations and providing …

Removal Of Sustained Casing Pressure By Gravity Displacement Of Annular Fluid, Efecan Demirci

LSU Master's Theses

Sustained Casing Pressure (SCP) is the undesirable casing head pressure of a well annulus that rebuilds when bled-down. As the conventional methods for SCP removal using rigs are expensive, there is a need for improvement. Annular intervention for replacing the fluid above the leaking cement with a heavier fluid to stop gas migration is a solution for SCP removal; however, previous attempts failed due to miscibility of injected fluids. Using hydrophobic heavy fluids for the purpose is a newly proposed technique to the technology. Potential of theoretically selected and produced immiscible heavy fluids are investigated in characterized annular fluids. A …

Investigation Of Dimensionality-Dependent Foam Rheological Properties By Using Mechanistic Foam Model, Woochan Lee

LSU Master's Theses

A numerous laboratory and field tests revealed that foam can effectively control gas mobility, improve sweep efficiency, and increase oil production, if correctly designed. It is believed that there is a significant gap between small laboratory-scale experiments and large field-scale tests because of two main reasons: (i) typical laboratory flow tests are conducted in linear systems, while field-scale foam EOR processes are performed in radial (or spherical partly) systems in general; and (ii) through the complicated in-situ lamella creation and coalescence mechanisms and non-Newtonian behavior, foam rheology is thought to depend on geometry and dimensionality and, as a result, it …